! Started logfile: J2005-3723_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:44:16 2016 obs J2005-3723_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2014_12_20_pus_uva.fits ! AN table 1: 98 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611111 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 10780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.623342Jy sigma=0.004742 ! Fit after self-cal, rms=0.604230Jy sigma=0.004593 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.701 mas, bpa=-0.3681 degrees ! Estimated noise=1302.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299144 Jy ! Component: 100 - total flux cleaned = 0.365136 Jy ! Total flux subtracted in 100 components = 0.365136 Jy ! Clean residual min=-0.014918 max=0.030982 Jy/beam ! Clean residual mean=-0.000064 rms=0.003420 Jy/beam ! Combined flux in latest and established models = 0.365136 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.365136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153582Jy sigma=0.001081 ! Fit after self-cal, rms=0.153581Jy sigma=0.001081 ! Inverting map ! Added new window around map position (3, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309173 Jy ! Component: 100 - total flux cleaned = 0.0505871 Jy ! Total flux subtracted in 100 components = 0.0505871 Jy ! Clean residual min=-0.011111 max=0.024434 Jy/beam ! Clean residual mean=-0.000050 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.415723 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.415723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140550Jy sigma=0.000973 ! Fit after self-cal, rms=0.140040Jy sigma=0.000968 ! Inverting map ! Added new window around map position (4, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210795 Jy ! Component: 100 - total flux cleaned = 0.0340009 Jy ! Total flux subtracted in 100 components = 0.0340009 Jy ! Clean residual min=-0.010926 max=0.019968 Jy/beam ! Clean residual mean=-0.000038 rms=0.002573 Jy/beam ! Combined flux in latest and established models = 0.449724 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.449724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134631Jy sigma=0.000930 ! Fit after self-cal, rms=0.134204Jy sigma=0.000926 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=8.728 mas, bpa=-1.885 degrees ! Estimated noise=902.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210057 Jy ! Component: 100 - total flux cleaned = 0.0333268 Jy ! Component: 150 - total flux cleaned = 0.0408817 Jy ! Component: 200 - total flux cleaned = 0.0448543 Jy ! Total flux subtracted in 200 components = 0.0448543 Jy ! Clean residual min=-0.010150 max=0.008434 Jy/beam ! Clean residual mean=-0.000143 rms=0.002667 Jy/beam ! Combined flux in latest and established models = 0.494578 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 69 components and 0.494578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129835Jy sigma=0.000905 ! Fit after self-cal, rms=0.129777Jy sigma=0.000904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.87 HN 1.26 KP 1.11 ! LA 0.98 MK 1.00 NL 1.01 OV 0.96 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 1.38 KP 1.08 ! LA 0.95 MK 0.99 NL 1.05 OV 0.97 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 1.46 KP 0.96 ! LA 0.77 MK 1.00 NL 1.30 OV 0.91 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.01 HN 1.33 KP 0.92 ! LA 0.80 MK 1.01 NL 1.09 OV 0.95 ! PT 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.129777Jy sigma=0.000904 ! Fit after self-cal, rms=0.122180Jy sigma=0.000806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.758 mas, bpa=-1.989 degrees ! Estimated noise=916.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00528238 Jy ! Component: 100 - total flux cleaned = -0.00634893 Jy ! Component: 150 - total flux cleaned = -0.00711074 Jy ! Component: 200 - total flux cleaned = -0.00778665 Jy ! Total flux subtracted in 200 components = -0.00778665 Jy ! Clean residual min=-0.004980 max=0.004943 Jy/beam ! Clean residual mean=0.000049 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.486791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.486791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121671Jy sigma=0.000802 ! Fit after self-cal, rms=0.121702Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121702Jy sigma=0.000801 ! Fit after self-cal, rms=0.122642Jy sigma=0.000795 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.782 mas, bpa=-2.024 degrees ! Estimated noise=919.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00254547 Jy ! Component: 100 - total flux cleaned = -0.00340385 Jy ! Component: 150 - total flux cleaned = -0.004145 Jy ! Component: 200 - total flux cleaned = -0.00469123 Jy ! Total flux subtracted in 200 components = -0.00469123 Jy ! Clean residual min=-0.004720 max=0.004366 Jy/beam ! Clean residual mean=0.000041 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.4821 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.4821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122345Jy sigma=0.000793 ! Fit after self-cal, rms=0.122342Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627779 Jy ! Component: 100 - total flux cleaned = -0.000905896 Jy ! Component: 150 - total flux cleaned = -0.00107272 Jy ! Component: 200 - total flux cleaned = -0.00130766 Jy ! Total flux subtracted in 200 components = -0.00130766 Jy ! Clean residual min=-0.004694 max=0.004270 Jy/beam ! Clean residual mean=0.000036 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.480793 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 128 components and 0.480793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122215Jy sigma=0.000792 ! Fit after self-cal, rms=0.122197Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122197Jy sigma=0.000792 ! Fit after self-cal, rms=0.126061Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.797 mas, bpa=-2.049 degrees ! Estimated noise=919.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00367683 Jy ! Component: 100 - total flux cleaned = -0.00461111 Jy ! Component: 150 - total flux cleaned = -0.00514424 Jy ! Component: 200 - total flux cleaned = -0.00568837 Jy ! Total flux subtracted in 200 components = -0.00568837 Jy ! Clean residual min=-0.004346 max=0.003261 Jy/beam ! Clean residual mean=0.000017 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.475104 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 0.475104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125885Jy sigma=0.000773 ! Fit after self-cal, rms=0.125943Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524279 Jy ! Component: 100 - total flux cleaned = -0.00071203 Jy ! Component: 150 - total flux cleaned = -0.000822882 Jy ! Component: 200 - total flux cleaned = -0.00087689 Jy ! Total flux subtracted in 200 components = -0.00087689 Jy ! Clean residual min=-0.004239 max=0.003196 Jy/beam ! Clean residual mean=0.000013 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.474227 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.474227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125882Jy sigma=0.000772 ! Fit after self-cal, rms=0.125872Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125872Jy sigma=0.000772 ! Fit after self-cal, rms=0.127200Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=27.94 mas, bpa=2.165 degrees ! Estimated noise=1122.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307289 Jy ! Component: 100 - total flux cleaned = -0.00392905 Jy ! Component: 150 - total flux cleaned = -0.00413273 Jy ! Component: 200 - total flux cleaned = -0.00435562 Jy ! Total flux subtracted in 200 components = -0.00435562 Jy ! Clean residual min=-0.003988 max=0.002975 Jy/beam ! Clean residual mean=0.000021 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.469872 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 154 components and 0.469872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127120Jy sigma=0.000771 ! Fit after self-cal, rms=0.127116Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048752 Jy ! Component: 100 - total flux cleaned = -0.000523561 Jy ! Component: 150 - total flux cleaned = -0.000555898 Jy ! Component: 200 - total flux cleaned = -0.000582139 Jy ! Total flux subtracted in 200 components = -0.000582139 Jy ! Clean residual min=-0.003855 max=0.002930 Jy/beam ! Clean residual mean=0.000017 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.46929 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 157 components and 0.46929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127087Jy sigma=0.000771 ! Fit after self-cal, rms=0.127076Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.811 mas, bpa=-2.047 degrees ! Estimated noise=919.551 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.811 at -2.047 degrees (North through East) ! Clean map min=-0.0038597 max=0.38744 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=6.685 mas, bpa=-0.2195 degrees ! Estimated noise=1356.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310961 Jy ! Component: 100 - total flux cleaned = 0.380439 Jy ! Component: 150 - total flux cleaned = 0.408247 Jy ! Component: 200 - total flux cleaned = 0.425849 Jy ! Total flux subtracted in 200 components = 0.425849 Jy ! Clean residual min=-0.007288 max=0.009544 Jy/beam ! Clean residual mean=-0.000010 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.425849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.425849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.811 mas, bpa=-2.047 degrees ! Estimated noise=919.551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204644 Jy ! Component: 100 - total flux cleaned = 0.0309394 Jy ! Component: 150 - total flux cleaned = 0.0370252 Jy ! Component: 200 - total flux cleaned = 0.0406496 Jy ! Total flux subtracted in 200 components = 0.0406496 Jy ! Clean residual min=-0.004073 max=0.003120 Jy/beam ! Clean residual mean=0.000003 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.466499 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.466499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=27.94 mas, bpa=2.165 degrees ! Estimated noise=1122.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024201 Jy ! Component: 100 - total flux cleaned = 0.00341585 Jy ! Component: 150 - total flux cleaned = 0.0034637 Jy ! Component: 200 - total flux cleaned = 0.00348319 Jy ! Total flux subtracted in 200 components = 0.00348319 Jy ! Clean residual min=-0.003928 max=0.003036 Jy/beam ! Clean residual mean=0.000024 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.469982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.68819e-05 Jy ! Component: 100 - total flux cleaned = -1.74071e-05 Jy ! Component: 150 - total flux cleaned = -1.87352e-05 Jy ! Component: 200 - total flux cleaned = -3.26668e-05 Jy ! Total flux subtracted in 200 components = -3.26668e-05 Jy ! Clean residual min=-0.003897 max=0.003026 Jy/beam ! Clean residual mean=0.000024 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.469949 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.469949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.811 mas, bpa=-2.047 degrees ! Estimated noise=919.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.03364e-07 Jy ! Component: 100 - total flux cleaned = 1.06563e-06 Jy ! Component: 150 - total flux cleaned = 3.61498e-06 Jy ! Component: 200 - total flux cleaned = 5.37888e-05 Jy ! Total flux subtracted in 200 components = 5.37888e-05 Jy ! Clean residual min=-0.003800 max=0.003126 Jy/beam ! Clean residual mean=0.000013 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.470003 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.470003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127170Jy sigma=0.000771 ! Fit after self-cal, rms=0.127137Jy sigma=0.000771 wmodel J2005-3723_S_2014_12_20_pus_map.mod ! Writing 89 model components to file: J2005-3723_S_2014_12_20_pus_map.mod wobs J2005-3723_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2014_12_20_pus_uvs.fits wwins J2005-3723_S_2014_12_20_pus_map.win ! wwins: Wrote 4 windows to J2005-3723_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000990847 Jy ! Component: 100 - total flux cleaned = -0.000991794 Jy ! Component: 150 - total flux cleaned = -0.000942517 Jy ! Component: 200 - total flux cleaned = -0.000750983 Jy ! Component: 250 - total flux cleaned = -0.000474065 Jy ! Component: 300 - total flux cleaned = -0.00011701 Jy ! Component: 350 - total flux cleaned = 0.000274365 Jy ! Component: 400 - total flux cleaned = 0.000528786 Jy ! Component: 450 - total flux cleaned = 0.000819907 Jy ! Component: 500 - total flux cleaned = 0.00102453 Jy ! Component: 550 - total flux cleaned = 0.0012252 Jy ! Component: 600 - total flux cleaned = 0.00134369 Jy ! Component: 650 - total flux cleaned = 0.00146042 Jy ! Component: 700 - total flux cleaned = 0.00149876 Jy ! Component: 750 - total flux cleaned = 0.00157547 Jy ! Component: 800 - total flux cleaned = 0.00172566 Jy ! Component: 850 - total flux cleaned = 0.00165161 Jy ! Component: 900 - total flux cleaned = 0.00161528 Jy ! Component: 950 - total flux cleaned = 0.00172396 Jy ! Component: 1000 - total flux cleaned = 0.00168852 Jy ! Component: 1050 - total flux cleaned = 0.00172448 Jy ! Component: 1100 - total flux cleaned = 0.00183029 Jy ! Component: 1150 - total flux cleaned = 0.00203959 Jy ! Component: 1200 - total flux cleaned = 0.00203936 Jy ! Component: 1250 - total flux cleaned = 0.00210811 Jy ! Component: 1300 - total flux cleaned = 0.00227779 Jy ! Component: 1350 - total flux cleaned = 0.0023449 Jy ! Component: 1400 - total flux cleaned = 0.00237861 Jy ! Component: 1450 - total flux cleaned = 0.00254412 Jy ! Component: 1500 - total flux cleaned = 0.00257649 Jy ! Component: 1550 - total flux cleaned = 0.0027062 Jy ! Component: 1600 - total flux cleaned = 0.00257636 Jy ! Component: 1650 - total flux cleaned = 0.00257627 Jy ! Component: 1700 - total flux cleaned = 0.0027677 Jy ! Component: 1750 - total flux cleaned = 0.00264151 Jy ! Component: 1800 - total flux cleaned = 0.00276663 Jy ! Component: 1850 - total flux cleaned = 0.00270437 Jy ! Component: 1900 - total flux cleaned = 0.0027357 Jy ! Component: 1950 - total flux cleaned = 0.00279698 Jy ! Component: 2000 - total flux cleaned = 0.00267534 Jy ! Component: 2050 - total flux cleaned = 0.00276657 Jy ! Component: 2100 - total flux cleaned = 0.00276654 Jy ! Component: 2150 - total flux cleaned = 0.00285568 Jy ! Component: 2200 - total flux cleaned = 0.00282595 Jy ! Component: 2250 - total flux cleaned = 0.00282578 Jy ! Component: 2300 - total flux cleaned = 0.0027087 Jy ! Component: 2350 - total flux cleaned = 0.00285395 Jy ! Component: 2400 - total flux cleaned = 0.00268079 Jy ! Component: 2450 - total flux cleaned = 0.00262399 Jy ! Component: 2500 - total flux cleaned = 0.00276657 Jy ! Component: 2550 - total flux cleaned = 0.00270996 Jy ! Component: 2600 - total flux cleaned = 0.00279422 Jy ! Component: 2650 - total flux cleaned = 0.00265429 Jy ! Component: 2700 - total flux cleaned = 0.00265445 Jy ! Component: 2750 - total flux cleaned = 0.00265441 Jy ! Component: 2800 - total flux cleaned = 0.00273689 Jy ! Component: 2850 - total flux cleaned = 0.00260036 Jy ! Component: 2900 - total flux cleaned = 0.00265435 Jy ! Component: 2950 - total flux cleaned = 0.0025733 Jy ! Component: 3000 - total flux cleaned = 0.00251965 Jy ! Component: 3050 - total flux cleaned = 0.00241313 Jy ! Component: 3100 - total flux cleaned = 0.00241302 Jy ! Component: 3150 - total flux cleaned = 0.0023602 Jy ! Component: 3200 - total flux cleaned = 0.00249153 Jy ! Component: 3250 - total flux cleaned = 0.00236137 Jy ! Component: 3300 - total flux cleaned = 0.00233544 Jy ! Component: 3350 - total flux cleaned = 0.00230966 Jy ! Component: 3400 - total flux cleaned = 0.00238642 Jy ! Component: 3450 - total flux cleaned = 0.00223315 Jy ! Component: 3500 - total flux cleaned = 0.00220771 Jy ! Component: 3550 - total flux cleaned = 0.00213181 Jy ! Component: 3600 - total flux cleaned = 0.0020562 Jy ! Component: 3650 - total flux cleaned = 0.00213148 Jy ! Component: 3700 - total flux cleaned = 0.00215651 Jy ! Component: 3750 - total flux cleaned = 0.00195815 Jy ! Component: 3800 - total flux cleaned = 0.00203229 Jy ! Component: 3850 - total flux cleaned = 0.001885 Jy ! Component: 3900 - total flux cleaned = 0.00195839 Jy ! Component: 3950 - total flux cleaned = 0.00186098 Jy ! Component: 4000 - total flux cleaned = 0.00186087 Jy ! Component: 4050 - total flux cleaned = 0.00183683 Jy ! Total flux subtracted in 4096 components = 0.00181279 Jy ! Clean residual min=-0.001418 max=0.001638 Jy/beam ! Clean residual mean=0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.471816 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 389 components and 0.471816 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.811 at -2.047 degrees (North through East) ! Clean map min=-0.003172 max=0.39497 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.394972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000460362 device "J2005-3723_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J2005-3723_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.349667 0.349667 0.699333 1.39867 2.79733 5.59467 11.1893 22.3787 44.7573 89.5147 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.394 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.811 at -2.047 degrees (North through East) ! Clean map min=-0.003172 max=0.39497 Jy/beam quit ! Quitting program ! Log file J2005-3723_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:44:21 2016