! Started logfile: J1711-2509_X_2014_12_20_pus_uvs.log on Tue Dec 27 21:47:27 2016
obs J1711-2509_X_2014_12_20_pus_uva.fits
! Reading UV FITS file: J1711-2509_X_2014_12_20_pus_uva.fits
! AN table 1: 124 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.967204 visibilities/baseline/integration-bin.
! Found source: J1711-2509
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 364 lines of history.
! 
! Reading 64764 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1711-2509_X_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.928024Jy  sigma=0.009355
! Fit after  self-cal, rms=0.885536Jy  sigma=0.008945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6189 mas, bmaj=1.785 mas, bpa=-10.69 degrees
! Estimated noise=626.555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937026 Jy
! Component: 100  -  total flux cleaned = 0.114136 Jy
! Total flux subtracted in 100 components = 0.114136 Jy
! Clean residual min=-0.003319 max=0.005711 Jy/beam
! Clean residual mean=-0.000000 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.114136 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.114136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088340Jy  sigma=0.000790
! Fit after  self-cal, rms=0.088327Jy  sigma=0.000790
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481259 Jy
! Component: 100  -  total flux cleaned = 0.00619734 Jy
! Total flux subtracted in 100 components = 0.00619734 Jy
! Clean residual min=-0.003127 max=0.003239 Jy/beam
! Clean residual mean=0.000005 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.120333 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.120333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088171Jy  sigma=0.000787
! Fit after  self-cal, rms=0.088175Jy  sigma=0.000787
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8234 mas, bmaj=2.136 mas, bpa=-8.69 degrees
! Estimated noise=281.819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329952 Jy
! Component: 100  -  total flux cleaned = 0.000358113 Jy
! Component: 150  -  total flux cleaned = 0.000382152 Jy
! Component: 200  -  total flux cleaned = 0.000449048 Jy
! Total flux subtracted in 200 components = 0.000449048 Jy
! Clean residual min=-0.002540 max=0.003003 Jy/beam
! Clean residual mean=0.000015 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.120782 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.120782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088161Jy  sigma=0.000787
! Fit after  self-cal, rms=0.088161Jy  sigma=0.000787
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.09     KP        1.08     
!   LA        0.96     MK        0.95     NL        0.95     OV        0.95     
!   PT        1.24     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        1.07     KP        1.04     
!   LA        0.96     MK        0.97     NL        0.93     OV        0.94     
!   PT        1.17     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.08     KP        0.98     
!   LA        0.98     MK        0.99     NL        0.93     OV        0.93     
!   PT        1.12     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.06     KP        0.91     
!   LA        1.03     MK        0.99     NL        0.95     OV        0.90     
!   PT        1.14     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.03     KP        0.88     
!   LA        1.00     MK        0.98     NL        0.95     OV        0.93     
!   PT        1.15     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.04     KP        0.87     
!   LA        0.99     MK        1.00     NL        0.97     OV        0.95     
!   PT        1.15     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.14     HN        1.18     KP        0.88     
!   LA        1.00     MK        1.03     NL        0.96     OV        0.98     
!   PT        1.21     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     HN        1.15     KP        0.87     
!   LA        0.97     MK        1.00     NL        0.96     OV        0.98     
!   PT        1.15     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.12     KP        0.89     
!   LA        0.99     MK        0.97     NL        0.95     OV        0.93     
!   PT        1.14     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.08     KP        0.93     
!   LA        1.01     MK        0.98     NL        0.94     OV        0.96     
!   PT        1.13     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.10     KP        0.96     
!   LA        0.99     MK        1.01     NL        0.97     OV        0.94     
!   PT        1.13     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.03     KP        0.95     
!   LA        0.97     MK        1.01     NL        0.97     OV        0.95     
!   PT        1.18     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.088161Jy  sigma=0.000787
! Fit after  self-cal, rms=0.090596Jy  sigma=0.000779
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8234 mas, bmaj=2.125 mas, bpa=-8.625 degrees
! Estimated noise=280.869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.15609e-05 Jy
! Component: 100  -  total flux cleaned = 4.15684e-05 Jy
! Component: 150  -  total flux cleaned = 7.04398e-06 Jy
! Component: 200  -  total flux cleaned = -1.58435e-05 Jy
! Total flux subtracted in 200 components = -1.58435e-05 Jy
! Clean residual min=-0.001162 max=0.001279 Jy/beam
! Clean residual mean=-0.000011 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.120766 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 0.120766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090593Jy  sigma=0.000779
! Fit after  self-cal, rms=0.090718Jy  sigma=0.000778
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090718Jy  sigma=0.000778
! Fit after  self-cal, rms=0.090816Jy  sigma=0.000778
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8231 mas, bmaj=2.124 mas, bpa=-8.624 degrees
! Estimated noise=280.775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.56968e-05 Jy
! Component: 100  -  total flux cleaned = 8.26103e-06 Jy
! Component: 150  -  total flux cleaned = -1.22219e-05 Jy
! Component: 200  -  total flux cleaned = -3.0576e-05 Jy
! Total flux subtracted in 200 components = -3.0576e-05 Jy
! Clean residual min=-0.001144 max=0.001282 Jy/beam
! Clean residual mean=-0.000011 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.120736 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.120736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090814Jy  sigma=0.000778
! Fit after  self-cal, rms=0.090818Jy  sigma=0.000778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.68498e-05 Jy
! Component: 100  -  total flux cleaned = -2.28924e-05 Jy
! Component: 150  -  total flux cleaned = -3.32554e-05 Jy
! Component: 200  -  total flux cleaned = -4.2183e-05 Jy
! Total flux subtracted in 200 components = -4.2183e-05 Jy
! Clean residual min=-0.001131 max=0.001290 Jy/beam
! Clean residual mean=-0.000011 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.120694 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.120694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090817Jy  sigma=0.000778
! Fit after  self-cal, rms=0.090817Jy  sigma=0.000778
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090817Jy  sigma=0.000778
! Fit after  self-cal, rms=0.091654Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8225 mas, bmaj=2.125 mas, bpa=-8.605 degrees
! Estimated noise=280.825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.02996e-05 Jy
! Component: 100  -  total flux cleaned = 3.4903e-05 Jy
! Component: 150  -  total flux cleaned = 2.63351e-05 Jy
! Component: 200  -  total flux cleaned = 2.23944e-05 Jy
! Total flux subtracted in 200 components = 2.23944e-05 Jy
! Clean residual min=-0.000825 max=0.000723 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.120716 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 0.120716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091654Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091672Jy  sigma=0.000777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.05418e-05 Jy
! Component: 100  -  total flux cleaned = -2.68825e-05 Jy
! Component: 150  -  total flux cleaned = -2.6847e-05 Jy
! Component: 200  -  total flux cleaned = -2.96482e-05 Jy
! Total flux subtracted in 200 components = -2.96482e-05 Jy
! Clean residual min=-0.000817 max=0.000718 Jy/beam
! Clean residual mean=-0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.120686 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.120686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091671Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091671Jy  sigma=0.000777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091671Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091700Jy  sigma=0.000777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.155 mas, bmaj=5.101 mas, bpa=-5.855 degrees
! Estimated noise=365.699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.81358e-05 Jy
! Component: 100  -  total flux cleaned = 6.81161e-05 Jy
! Component: 150  -  total flux cleaned = 6.67479e-05 Jy
! Component: 200  -  total flux cleaned = 6.54797e-05 Jy
! Total flux subtracted in 200 components = 6.54797e-05 Jy
! Clean residual min=-0.000862 max=0.000790 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.120752 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 35 components and 0.120752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091700Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091700Jy  sigma=0.000777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.5013e-06 Jy
! Component: 100  -  total flux cleaned = 7.09723e-06 Jy
! Component: 150  -  total flux cleaned = 5.8148e-06 Jy
! Component: 200  -  total flux cleaned = 4.64115e-06 Jy
! Total flux subtracted in 200 components = 4.64115e-06 Jy
! Clean residual min=-0.000864 max=0.000790 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.120757 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 35 components and 0.120757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091700Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091700Jy  sigma=0.000777
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=2.124 mas, bpa=-8.607 degrees
! Estimated noise=280.81 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8222 x 2.124 at -8.607 degrees (North through East)
! Clean map  min=-0.00075183  max=0.11896 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6194 mas, bmaj=1.773 mas, bpa=-10.6 degrees
! Estimated noise=620.854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.092824 Jy
! Component: 100  -  total flux cleaned = 0.113066 Jy
! Component: 150  -  total flux cleaned = 0.117852 Jy
! Component: 200  -  total flux cleaned = 0.119421 Jy
! Total flux subtracted in 200 components = 0.119421 Jy
! Clean residual min=-0.001878 max=0.001758 Jy/beam
! Clean residual mean=-0.000001 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.119421 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.119421 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=2.124 mas, bpa=-8.607 degrees
! Estimated noise=280.81 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914029 Jy
! Component: 100  -  total flux cleaned = 0.00101992 Jy
! Component: 150  -  total flux cleaned = 0.00107904 Jy
! Component: 200  -  total flux cleaned = 0.00112679 Jy
! Total flux subtracted in 200 components = 0.00112679 Jy
! Clean residual min=-0.000911 max=0.000743 Jy/beam
! Clean residual mean=-0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.120548 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.120548 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.155 mas, bmaj=5.101 mas, bpa=-5.855 degrees
! Estimated noise=365.699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169037 Jy
! Component: 100  -  total flux cleaned = 0.000181244 Jy
! Component: 150  -  total flux cleaned = 0.000191137 Jy
! Component: 200  -  total flux cleaned = 0.000199398 Jy
! Total flux subtracted in 200 components = 0.000199398 Jy
! Clean residual min=-0.000843 max=0.000799 Jy/beam
! Clean residual mean=-0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.120747 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.54897e-06 Jy
! Component: 100  -  total flux cleaned = 9.91569e-06 Jy
! Component: 150  -  total flux cleaned = 1.24984e-05 Jy
! Component: 200  -  total flux cleaned = 1.2391e-05 Jy
! Total flux subtracted in 200 components = 1.2391e-05 Jy
! Clean residual min=-0.000850 max=0.000796 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.12076 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 28 components and 0.12076 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=2.124 mas, bpa=-8.607 degrees
! Estimated noise=280.81 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.70333e-05 Jy
! Component: 100  -  total flux cleaned = -5.02003e-05 Jy
! Component: 150  -  total flux cleaned = -6.41831e-05 Jy
! Component: 200  -  total flux cleaned = -6.41175e-05 Jy
! Total flux subtracted in 200 components = -6.41175e-05 Jy
! Clean residual min=-0.000876 max=0.000741 Jy/beam
! Clean residual mean=-0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.120695 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.120695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091701Jy  sigma=0.000777
! Fit after  self-cal, rms=0.091698Jy  sigma=0.000777
wmodel J1711-2509_X_2014_12_20_pus_map.mod
! Writing 32 model components to file: J1711-2509_X_2014_12_20_pus_map.mod
wobs J1711-2509_X_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J1711-2509_X_2014_12_20_pus_uvs.fits
wwins J1711-2509_X_2014_12_20_pus_map.win
! wwins: Wrote 1 windows to J1711-2509_X_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308345 Jy
! Component: 100  -  total flux cleaned = -0.000498284 Jy
! Component: 150  -  total flux cleaned = -0.000588047 Jy
! Component: 200  -  total flux cleaned = -0.000697938 Jy
! Component: 250  -  total flux cleaned = -0.000745013 Jy
! Component: 300  -  total flux cleaned = -0.000768008 Jy
! Component: 350  -  total flux cleaned = -0.000790141 Jy
! Component: 400  -  total flux cleaned = -0.000833212 Jy
! Component: 450  -  total flux cleaned = -0.000864855 Jy
! Component: 500  -  total flux cleaned = -0.00089589 Jy
! Component: 550  -  total flux cleaned = -0.000946159 Jy
! Component: 600  -  total flux cleaned = -0.0009558 Jy
! Component: 650  -  total flux cleaned = -0.000955834 Jy
! Component: 700  -  total flux cleaned = -0.000974928 Jy
! Component: 750  -  total flux cleaned = -0.000993587 Jy
! Component: 800  -  total flux cleaned = -0.00102093 Jy
! Component: 850  -  total flux cleaned = -0.0010209 Jy
! Component: 900  -  total flux cleaned = -0.00106517 Jy
! Component: 950  -  total flux cleaned = -0.00108259 Jy
! Component: 1000  -  total flux cleaned = -0.00112549 Jy
! Component: 1050  -  total flux cleaned = -0.0011423 Jy
! Component: 1100  -  total flux cleaned = -0.0011754 Jy
! Component: 1150  -  total flux cleaned = -0.00119983 Jy
! Component: 1200  -  total flux cleaned = -0.00120792 Jy
! Component: 1250  -  total flux cleaned = -0.00121591 Jy
! Component: 1300  -  total flux cleaned = -0.00123175 Jy
! Component: 1350  -  total flux cleaned = -0.00126261 Jy
! Component: 1400  -  total flux cleaned = -0.00125487 Jy
! Component: 1450  -  total flux cleaned = -0.00123979 Jy
! Component: 1500  -  total flux cleaned = -0.00126239 Jy
! Component: 1550  -  total flux cleaned = -0.00125501 Jy
! Component: 1600  -  total flux cleaned = -0.001255 Jy
! Component: 1650  -  total flux cleaned = -0.00125506 Jy
! Component: 1700  -  total flux cleaned = -0.00125507 Jy
! Component: 1750  -  total flux cleaned = -0.0012552 Jy
! Component: 1800  -  total flux cleaned = -0.00128311 Jy
! Component: 1850  -  total flux cleaned = -0.00129006 Jy
! Component: 1900  -  total flux cleaned = -0.00131737 Jy
! Component: 1950  -  total flux cleaned = -0.00131059 Jy
! Component: 2000  -  total flux cleaned = -0.00131732 Jy
! Total flux subtracted in 2048 components = -0.00131745 Jy
! Clean residual min=-0.000438 max=0.000376 Jy/beam
! Clean residual mean=0.000002 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.119378 Jy
keep
! Adding 143 model components to the UV plane model.
! The established model now contains 175 components and 0.119378 Jy
![Exited script file: muppet]
wmap "J1711-2509_X_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8222 x 2.124 at -8.607 degrees (North through East)
! Clean map  min=-0.00067242  max=0.11887 Jy/beam
! Writing clean map to FITS file: J1711-2509_X_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.118868 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125836 
device "J1711-2509_X_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J1711-2509_X_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.317585 0.317585 0.63517 1.27034 2.54068 5.08136 10.1627 20.3255 40.6509 81.3018
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.118 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8222 x 2.124 at -8.607 degrees (North through East)
! Clean map  min=-0.00067242  max=0.11887 Jy/beam
quit
! Quitting program
! Log file J1711-2509_X_2014_12_20_pus_uvs.log closed on Tue Dec 27 21:47:30 2016