! Started logfile: J1636-1315_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:41:17 2016 obs J1636-1315_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1636-1315_S_2014_12_20_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970686 visibilities/baseline/integration-bin. ! Found source: J1636-1315 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 16424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1636-1315_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889456Jy sigma=0.008406 ! Fit after self-cal, rms=0.866790Jy sigma=0.008203 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=6.394 mas, bpa=-3.292 degrees ! Estimated noise=872.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0907165 Jy ! Component: 100 - total flux cleaned = 0.13712 Jy ! Total flux subtracted in 100 components = 0.13712 Jy ! Clean residual min=-0.010709 max=0.028322 Jy/beam ! Clean residual mean=0.000029 rms=0.003881 Jy/beam ! Combined flux in latest and established models = 0.13712 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.13712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135898Jy sigma=0.001218 ! Fit after self-cal, rms=0.135480Jy sigma=0.001215 ! Inverting map ! Added new window around map position (2.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032348 Jy ! Component: 100 - total flux cleaned = 0.0549415 Jy ! Total flux subtracted in 100 components = 0.0549415 Jy ! Clean residual min=-0.008145 max=0.018848 Jy/beam ! Clean residual mean=0.000031 rms=0.002774 Jy/beam ! Combined flux in latest and established models = 0.192061 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 75 components and 0.192061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118526Jy sigma=0.001044 ! Fit after self-cal, rms=0.118358Jy sigma=0.001043 ! Inverting map ! Added new window around map position (-4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019589 Jy ! Component: 100 - total flux cleaned = 0.0342271 Jy ! Total flux subtracted in 100 components = 0.0342271 Jy ! Clean residual min=-0.006532 max=0.009606 Jy/beam ! Clean residual mean=0.000032 rms=0.002220 Jy/beam ! Combined flux in latest and established models = 0.226288 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 109 components and 0.226289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110613Jy sigma=0.000967 ! Fit after self-cal, rms=0.110588Jy sigma=0.000966 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=7.67 mas, bpa=-2.653 degrees ! Estimated noise=590.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262233 Jy ! Component: 100 - total flux cleaned = 0.0447004 Jy ! Component: 150 - total flux cleaned = 0.0582686 Jy ! Component: 200 - total flux cleaned = 0.0683017 Jy ! Total flux subtracted in 200 components = 0.0683017 Jy ! Clean residual min=-0.008208 max=0.013360 Jy/beam ! Clean residual mean=0.000018 rms=0.003038 Jy/beam ! Combined flux in latest and established models = 0.29459 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 150 components and 0.29459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101613Jy sigma=0.000886 ! Fit after self-cal, rms=0.101520Jy sigma=0.000885 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.80 HN 1.01 KP 1.04 ! LA 0.89 MK 1.15 NL 1.43 OV 0.98 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.94 HN 1.07 KP 0.99 ! LA 0.87 MK 1.05 NL 1.46 OV 1.01 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.09 HN 1.03 KP 0.89 ! LA 0.71 MK 1.09 NL 1.47 OV 0.91 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.93 HN 0.97 KP 0.85 ! LA 0.76 MK 0.97 NL 1.03 OV 0.97 ! PT 0.96 SC 0.97 ! ! ! Fit before self-cal, rms=0.101520Jy sigma=0.000885 ! Fit after self-cal, rms=0.096631Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.825 mas, bpa=-1.816 degrees ! Estimated noise=598.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109892 Jy ! Component: 100 - total flux cleaned = -0.000950323 Jy ! Component: 150 - total flux cleaned = -0.000821387 Jy ! Component: 200 - total flux cleaned = -0.000654814 Jy ! Total flux subtracted in 200 components = -0.000654814 Jy ! Clean residual min=-0.007388 max=0.005606 Jy/beam ! Clean residual mean=-0.000001 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.293935 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 0.293935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096481Jy sigma=0.000806 ! Fit after self-cal, rms=0.096659Jy sigma=0.000805 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096659Jy sigma=0.000805 ! Fit after self-cal, rms=0.095167Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.82 mas, bpa=-1.923 degrees ! Estimated noise=593.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012134 Jy ! Component: 100 - total flux cleaned = 0.00136524 Jy ! Component: 150 - total flux cleaned = 0.00143987 Jy ! Component: 200 - total flux cleaned = 0.00150455 Jy ! Total flux subtracted in 200 components = 0.00150455 Jy ! Clean residual min=-0.002481 max=0.003079 Jy/beam ! Clean residual mean=0.000001 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.29544 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 163 components and 0.29544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095148Jy sigma=0.000785 ! Fit after self-cal, rms=0.095237Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34, 65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164909 Jy ! Component: 100 - total flux cleaned = 0.00158917 Jy ! Component: 150 - total flux cleaned = 0.00148176 Jy ! Component: 200 - total flux cleaned = 0.00143637 Jy ! Total flux subtracted in 200 components = 0.00143637 Jy ! Clean residual min=-0.002432 max=0.002921 Jy/beam ! Clean residual mean=-0.000000 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.296876 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 184 components and 0.296876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095139Jy sigma=0.000784 ! Fit after self-cal, rms=0.095129Jy sigma=0.000784 ! Inverting map ! Added new window around map position (7, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182508 Jy ! Component: 100 - total flux cleaned = 0.00194227 Jy ! Component: 150 - total flux cleaned = 0.00179483 Jy ! Component: 200 - total flux cleaned = 0.00166378 Jy ! Total flux subtracted in 200 components = 0.00166378 Jy ! Clean residual min=-0.002271 max=0.002687 Jy/beam ! Clean residual mean=0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.29854 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 204 components and 0.29854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095044Jy sigma=0.000783 ! Fit after self-cal, rms=0.095010Jy sigma=0.000783 ! Inverting map ! Added new window around map position (-73, 81). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025492 Jy ! Component: 100 - total flux cleaned = 0.0040343 Jy ! Component: 150 - total flux cleaned = 0.00434943 Jy ! Component: 200 - total flux cleaned = 0.00443357 Jy ! Total flux subtracted in 200 components = 0.00443357 Jy ! Clean residual min=-0.002115 max=0.002076 Jy/beam ! Clean residual mean=0.000002 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.302974 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 225 components and 0.302974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094919Jy sigma=0.000782 ! Fit after self-cal, rms=0.094875Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094875Jy sigma=0.000782 ! Fit after self-cal, rms=0.093026Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.752 mas, bpa=-1.617 degrees ! Estimated noise=585.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150371 Jy ! Component: 100 - total flux cleaned = 0.00201577 Jy ! Component: 150 - total flux cleaned = 0.00219895 Jy ! Component: 200 - total flux cleaned = 0.00233667 Jy ! Total flux subtracted in 200 components = 0.00233667 Jy ! Clean residual min=-0.002046 max=0.001902 Jy/beam ! Clean residual mean=0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.30531 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 244 components and 0.30531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092987Jy sigma=0.000781 ! Fit after self-cal, rms=0.092951Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402358 Jy ! Component: 100 - total flux cleaned = 0.000538835 Jy ! Component: 150 - total flux cleaned = 0.000602908 Jy ! Component: 200 - total flux cleaned = 0.000634129 Jy ! Total flux subtracted in 200 components = 0.000634129 Jy ! Clean residual min=-0.002022 max=0.001869 Jy/beam ! Clean residual mean=0.000002 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.305945 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 253 components and 0.305945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092927Jy sigma=0.000781 ! Fit after self-cal, rms=0.092915Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092915Jy sigma=0.000781 ! Fit after self-cal, rms=0.092004Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=14.64 mas, bpa=2.698 degrees ! Estimated noise=732.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133302 Jy ! Component: 100 - total flux cleaned = 0.00190563 Jy ! Component: 150 - total flux cleaned = 0.00219089 Jy ! Component: 200 - total flux cleaned = 0.00233594 Jy ! Total flux subtracted in 200 components = 0.00233594 Jy ! Clean residual min=-0.002150 max=0.002164 Jy/beam ! Clean residual mean=0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.30828 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 282 components and 0.30828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092000Jy sigma=0.000781 ! Fit after self-cal, rms=0.091994Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301941 Jy ! Component: 100 - total flux cleaned = 0.000430644 Jy ! Component: 150 - total flux cleaned = 0.000503002 Jy ! Component: 200 - total flux cleaned = 0.000546898 Jy ! Total flux subtracted in 200 components = 0.000546898 Jy ! Clean residual min=-0.002160 max=0.002112 Jy/beam ! Clean residual mean=0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.308827 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 288 components and 0.308827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091993Jy sigma=0.000781 ! Fit after self-cal, rms=0.091994Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=7.708 mas, bpa=-1.444 degrees ! Estimated noise=580.564 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 7.708 at -1.444 degrees (North through East) ! Clean map min=-0.0019796 max=0.10715 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=6.397 mas, bpa=-2.089 degrees ! Estimated noise=855.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0900047 Jy ! Component: 100 - total flux cleaned = 0.137544 Jy ! Component: 150 - total flux cleaned = 0.169499 Jy ! Component: 200 - total flux cleaned = 0.193112 Jy ! Total flux subtracted in 200 components = 0.193112 Jy ! Clean residual min=-0.007019 max=0.013716 Jy/beam ! Clean residual mean=0.000010 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.193112 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.193112 Jy ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=7.708 mas, bpa=-1.444 degrees ! Estimated noise=580.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327349 Jy ! Component: 100 - total flux cleaned = 0.0538132 Jy ! Component: 150 - total flux cleaned = 0.0682116 Jy ! Component: 200 - total flux cleaned = 0.0783692 Jy ! Total flux subtracted in 200 components = 0.0783692 Jy ! Clean residual min=-0.003826 max=0.006967 Jy/beam ! Clean residual mean=-0.000001 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.271481 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 157 components and 0.271481 Jy ! Inverting map ! Added new window around map position (1, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769503 Jy ! Component: 100 - total flux cleaned = 0.0132704 Jy ! Component: 150 - total flux cleaned = 0.0177205 Jy ! Component: 200 - total flux cleaned = 0.0214623 Jy ! Total flux subtracted in 200 components = 0.0214623 Jy ! Clean residual min=-0.002702 max=0.003241 Jy/beam ! Clean residual mean=0.000002 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.292944 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 202 components and 0.292944 Jy ! Inverting map ! Added new window around map position (-4.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355293 Jy ! Component: 100 - total flux cleaned = 0.00631435 Jy ! Component: 150 - total flux cleaned = 0.00820777 Jy ! Component: 200 - total flux cleaned = 0.00959695 Jy ! Total flux subtracted in 200 components = 0.00959695 Jy ! Clean residual min=-0.002345 max=0.002261 Jy/beam ! Clean residual mean=0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.302541 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 248 components and 0.302541 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=14.64 mas, bpa=2.698 degrees ! Estimated noise=732.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277991 Jy ! Component: 100 - total flux cleaned = 0.00350469 Jy ! Component: 150 - total flux cleaned = 0.00405233 Jy ! Component: 200 - total flux cleaned = 0.00429057 Jy ! Total flux subtracted in 200 components = 0.00429057 Jy ! Clean residual min=-0.002438 max=0.002175 Jy/beam ! Clean residual mean=0.000005 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.306831 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266133 Jy ! Component: 100 - total flux cleaned = 0.000459326 Jy ! Component: 150 - total flux cleaned = 0.000677815 Jy ! Component: 200 - total flux cleaned = 0.000796722 Jy ! Total flux subtracted in 200 components = 0.000796722 Jy ! Clean residual min=-0.002355 max=0.002132 Jy/beam ! Clean residual mean=0.000005 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.307628 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 323 components and 0.307628 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=7.708 mas, bpa=-1.444 degrees ! Estimated noise=580.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226173 Jy ! Component: 100 - total flux cleaned = 0.000324545 Jy ! Component: 150 - total flux cleaned = 0.000412915 Jy ! Component: 200 - total flux cleaned = 0.000453685 Jy ! Total flux subtracted in 200 components = 0.000453685 Jy ! Clean residual min=-0.002200 max=0.001924 Jy/beam ! Clean residual mean=0.000003 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.308082 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 350 components and 0.308082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091972Jy sigma=0.000781 ! Fit after self-cal, rms=0.091956Jy sigma=0.000780 wmodel J1636-1315_S_2014_12_20_pus_map.mod ! Writing 350 model components to file: J1636-1315_S_2014_12_20_pus_map.mod wobs J1636-1315_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1636-1315_S_2014_12_20_pus_uvs.fits wwins J1636-1315_S_2014_12_20_pus_map.win ! wwins: Wrote 8 windows to J1636-1315_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299766 Jy ! Component: 100 - total flux cleaned = -0.000514039 Jy ! Component: 150 - total flux cleaned = -0.000598085 Jy ! Component: 200 - total flux cleaned = -0.00076043 Jy ! Component: 250 - total flux cleaned = -0.000839037 Jy ! Component: 300 - total flux cleaned = -0.000864197 Jy ! Component: 350 - total flux cleaned = -0.000864231 Jy ! Component: 400 - total flux cleaned = -0.000888377 Jy ! Component: 450 - total flux cleaned = -0.000959535 Jy ! Component: 500 - total flux cleaned = -0.00102886 Jy ! Component: 550 - total flux cleaned = -0.00109702 Jy ! Component: 600 - total flux cleaned = -0.00118655 Jy ! Component: 650 - total flux cleaned = -0.00127436 Jy ! Component: 700 - total flux cleaned = -0.00133919 Jy ! Component: 750 - total flux cleaned = -0.00133944 Jy ! Component: 800 - total flux cleaned = -0.00138182 Jy ! Component: 850 - total flux cleaned = -0.00144424 Jy ! Component: 900 - total flux cleaned = -0.00152603 Jy ! Component: 950 - total flux cleaned = -0.00160712 Jy ! Component: 1000 - total flux cleaned = -0.00174642 Jy ! Component: 1050 - total flux cleaned = -0.00186403 Jy ! Component: 1100 - total flux cleaned = -0.00192201 Jy ! Component: 1150 - total flux cleaned = -0.00201783 Jy ! Component: 1200 - total flux cleaned = -0.0021123 Jy ! Component: 1250 - total flux cleaned = -0.00220568 Jy ! Component: 1300 - total flux cleaned = -0.00231659 Jy ! Component: 1350 - total flux cleaned = -0.00238919 Jy ! Component: 1400 - total flux cleaned = -0.00246105 Jy ! Component: 1450 - total flux cleaned = -0.00254967 Jy ! Component: 1500 - total flux cleaned = -0.00262024 Jy ! Component: 1550 - total flux cleaned = -0.00267256 Jy ! Component: 1600 - total flux cleaned = -0.00272459 Jy ! Component: 1650 - total flux cleaned = -0.00279314 Jy ! Component: 1700 - total flux cleaned = -0.00287821 Jy ! Component: 1750 - total flux cleaned = -0.00289462 Jy ! Component: 1800 - total flux cleaned = -0.00292811 Jy ! Component: 1850 - total flux cleaned = -0.00301044 Jy ! Component: 1900 - total flux cleaned = -0.00301044 Jy ! Component: 1950 - total flux cleaned = -0.00310726 Jy ! Component: 2000 - total flux cleaned = -0.00310712 Jy ! Component: 2050 - total flux cleaned = -0.00313907 Jy ! Component: 2100 - total flux cleaned = -0.00321767 Jy ! Component: 2150 - total flux cleaned = -0.00321757 Jy ! Component: 2200 - total flux cleaned = -0.00332571 Jy ! Component: 2250 - total flux cleaned = -0.00327997 Jy ! Component: 2300 - total flux cleaned = -0.00338618 Jy ! Component: 2350 - total flux cleaned = -0.00343114 Jy ! Component: 2400 - total flux cleaned = -0.00341607 Jy ! Component: 2450 - total flux cleaned = -0.00343112 Jy ! Component: 2500 - total flux cleaned = -0.00350448 Jy ! Component: 2550 - total flux cleaned = -0.00353377 Jy ! Component: 2600 - total flux cleaned = -0.00363509 Jy ! Component: 2650 - total flux cleaned = -0.00369228 Jy ! Component: 2700 - total flux cleaned = -0.00370635 Jy ! Component: 2750 - total flux cleaned = -0.0037064 Jy ! Component: 2800 - total flux cleaned = -0.00383202 Jy ! Component: 2850 - total flux cleaned = -0.00384603 Jy ! Component: 2900 - total flux cleaned = -0.00387345 Jy ! Component: 2950 - total flux cleaned = -0.00390063 Jy ! Component: 3000 - total flux cleaned = -0.00388723 Jy ! Component: 3050 - total flux cleaned = -0.00399473 Jy ! Component: 3100 - total flux cleaned = -0.00403475 Jy ! Component: 3150 - total flux cleaned = -0.00404799 Jy ! Component: 3200 - total flux cleaned = -0.00408763 Jy ! Component: 3250 - total flux cleaned = -0.00408773 Jy ! Component: 3300 - total flux cleaned = -0.00415242 Jy ! Component: 3350 - total flux cleaned = -0.00420399 Jy ! Component: 3400 - total flux cleaned = -0.00420399 Jy ! Component: 3450 - total flux cleaned = -0.00425471 Jy ! Component: 3500 - total flux cleaned = -0.00427977 Jy ! Component: 3550 - total flux cleaned = -0.00427986 Jy ! Component: 3600 - total flux cleaned = -0.00434206 Jy ! Component: 3650 - total flux cleaned = -0.00441623 Jy ! Component: 3700 - total flux cleaned = -0.00442849 Jy ! Component: 3750 - total flux cleaned = -0.00442859 Jy ! Component: 3800 - total flux cleaned = -0.00452538 Jy ! Component: 3850 - total flux cleaned = -0.00450137 Jy ! Component: 3900 - total flux cleaned = -0.00452518 Jy ! Component: 3950 - total flux cleaned = -0.00456087 Jy ! Component: 4000 - total flux cleaned = -0.00457272 Jy ! Component: 4050 - total flux cleaned = -0.00461971 Jy ! Total flux subtracted in 4096 components = -0.00463142 Jy ! Clean residual min=-0.000707 max=0.000718 Jy/beam ! Clean residual mean=0.000002 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.30345 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 640 components and 0.30345 Jy ![Exited script file: muppet] wmap "J1636-1315_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 7.708 at -1.444 degrees (North through East) ! Clean map min=-0.001696 max=0.11009 Jy/beam ! Writing clean map to FITS file: J1636-1315_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218497 device "J1636-1315_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1636-1315_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595421 0.595421 1.19084 2.38168 4.76337 9.52673 19.0535 38.1069 76.2139 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 7.708 at -1.444 degrees (North through East) ! Clean map min=-0.001696 max=0.11009 Jy/beam quit ! Quitting program ! Log file J1636-1315_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:41:23 2016