! Started logfile: J1359+5544_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:37:25 2016 obs J1359+5544_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1359+5544_S_2014_12_20_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97561 visibilities/baseline/integration-bin. ! Found source: J1359+5544 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 21600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1359+5544_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973532Jy sigma=0.011291 ! Fit after self-cal, rms=0.944628Jy sigma=0.010970 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=3.764 mas, bpa=-47.61 degrees ! Estimated noise=747.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435375 Jy ! Component: 100 - total flux cleaned = 0.0538618 Jy ! Total flux subtracted in 100 components = 0.0538618 Jy ! Clean residual min=-0.003851 max=0.003878 Jy/beam ! Clean residual mean=0.000001 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.0538618 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0538618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080571Jy sigma=0.000923 ! Fit after self-cal, rms=0.080465Jy sigma=0.000922 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.281 mas, bmaj=4.478 mas, bpa=-58.76 degrees ! Estimated noise=420.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054325 Jy ! Component: 100 - total flux cleaned = 0.00796859 Jy ! Component: 150 - total flux cleaned = 0.00943733 Jy ! Component: 200 - total flux cleaned = 0.0103494 Jy ! Total flux subtracted in 200 components = 0.0103494 Jy ! Clean residual min=-0.003047 max=0.002802 Jy/beam ! Clean residual mean=0.000005 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.0642111 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.0642111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080093Jy sigma=0.000918 ! Fit after self-cal, rms=0.080101Jy sigma=0.000918 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.05 HN 1.07 KP 0.67 ! LA 0.59 MK 1.11 NL 1.23 OV 1.19 ! PT 1.23 SC 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 1.01 KP 1.02 ! LA 0.98 MK 0.99 NL 1.09 OV 1.03 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.20 HN 1.00 KP 0.96 ! LA 0.71 MK 0.99 NL 1.25 OV 0.98 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.07 HN 0.93 KP 0.91 ! LA 0.82 MK 0.99 NL 1.09 OV 1.01 ! PT 1.04 SC 0.96 ! ! ! Fit before self-cal, rms=0.080101Jy sigma=0.000918 ! Fit after self-cal, rms=0.076908Jy sigma=0.000907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.323 mas, bmaj=4.528 mas, bpa=-55.84 degrees ! Estimated noise=425.132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104567 Jy ! Component: 100 - total flux cleaned = 4.07672e-05 Jy ! Component: 150 - total flux cleaned = 2.24444e-06 Jy ! Component: 200 - total flux cleaned = -2.9655e-05 Jy ! Total flux subtracted in 200 components = -2.9655e-05 Jy ! Clean residual min=-0.002408 max=0.003134 Jy/beam ! Clean residual mean=-0.000016 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.0641815 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0641815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076891Jy sigma=0.000907 ! Fit after self-cal, rms=0.077241Jy sigma=0.000905 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077241Jy sigma=0.000905 ! Fit after self-cal, rms=0.111596Jy sigma=0.000884 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=4.493 mas, bpa=-88.81 degrees ! Estimated noise=439.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147515 Jy ! Component: 100 - total flux cleaned = 0.00158459 Jy ! Component: 150 - total flux cleaned = 0.00153366 Jy ! Component: 200 - total flux cleaned = 0.00146956 Jy ! Total flux subtracted in 200 components = 0.00146956 Jy ! Clean residual min=-0.001752 max=0.003034 Jy/beam ! Clean residual mean=-0.000005 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.065651 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.0656511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111397Jy sigma=0.000885 ! Fit after self-cal, rms=0.112817Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, -69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024873 Jy ! Component: 100 - total flux cleaned = 0.00294241 Jy ! Component: 150 - total flux cleaned = 0.00294671 Jy ! Component: 200 - total flux cleaned = 0.00291531 Jy ! Total flux subtracted in 200 components = 0.00291531 Jy ! Clean residual min=-0.001450 max=0.002413 Jy/beam ! Clean residual mean=-0.000010 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0685664 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.0685664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112650Jy sigma=0.000881 ! Fit after self-cal, rms=0.112562Jy sigma=0.000881 ! Inverting map ! Added new window around map position (123, -66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158866 Jy ! Component: 100 - total flux cleaned = 0.00205613 Jy ! Component: 150 - total flux cleaned = 0.00209811 Jy ! Component: 200 - total flux cleaned = 0.0020651 Jy ! Total flux subtracted in 200 components = 0.0020651 Jy ! Clean residual min=-0.001445 max=0.001992 Jy/beam ! Clean residual mean=-0.000010 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0706315 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.0706315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112431Jy sigma=0.000881 ! Fit after self-cal, rms=0.112335Jy sigma=0.000881 ! Inverting map ! Added new window around map position (72.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186551 Jy ! Component: 100 - total flux cleaned = 0.00197022 Jy ! Component: 150 - total flux cleaned = 0.00182037 Jy ! Component: 200 - total flux cleaned = 0.0017197 Jy ! Total flux subtracted in 200 components = 0.0017197 Jy ! Clean residual min=-0.001469 max=0.001740 Jy/beam ! Clean residual mean=-0.000010 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0723512 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.0723512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112216Jy sigma=0.000881 ! Fit after self-cal, rms=0.112125Jy sigma=0.000880 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112125Jy sigma=0.000880 ! Fit after self-cal, rms=0.104771Jy sigma=0.000880 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.381 mas, bmaj=4.511 mas, bpa=70.92 degrees ! Estimated noise=445.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139506 Jy ! Component: 100 - total flux cleaned = 0.00179365 Jy ! Component: 150 - total flux cleaned = 0.00202108 Jy ! Component: 200 - total flux cleaned = 0.00219161 Jy ! Total flux subtracted in 200 components = 0.00219161 Jy ! Clean residual min=-0.001478 max=0.001791 Jy/beam ! Clean residual mean=-0.000008 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0745428 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 127 components and 0.0745428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104659Jy sigma=0.000880 ! Fit after self-cal, rms=0.104439Jy sigma=0.000880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140424 Jy ! Component: 100 - total flux cleaned = 0.00164039 Jy ! Component: 150 - total flux cleaned = 0.00167567 Jy ! Component: 200 - total flux cleaned = 0.00167579 Jy ! Total flux subtracted in 200 components = 0.00167579 Jy ! Clean residual min=-0.001424 max=0.001683 Jy/beam ! Clean residual mean=-0.000005 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0762186 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.0762186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104336Jy sigma=0.000879 ! Fit after self-cal, rms=0.104252Jy sigma=0.000879 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104252Jy sigma=0.000879 ! Fit after self-cal, rms=0.098714Jy sigma=0.000879 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=9.01 mas, bpa=66.79 degrees ! Estimated noise=536.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593479 Jy ! Component: 100 - total flux cleaned = 0.000695508 Jy ! Component: 150 - total flux cleaned = 0.000725781 Jy ! Component: 200 - total flux cleaned = 0.000780731 Jy ! Total flux subtracted in 200 components = 0.000780731 Jy ! Clean residual min=-0.001569 max=0.001744 Jy/beam ! Clean residual mean=-0.000007 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0769993 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 0.0769994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098652Jy sigma=0.000879 ! Fit after self-cal, rms=0.098493Jy sigma=0.000879 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201237 Jy ! Component: 100 - total flux cleaned = 0.000201655 Jy ! Component: 150 - total flux cleaned = 0.000202785 Jy ! Component: 200 - total flux cleaned = 0.000203551 Jy ! Total flux subtracted in 200 components = 0.000203551 Jy ! Clean residual min=-0.001586 max=0.001746 Jy/beam ! Clean residual mean=-0.000006 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0772029 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 172 components and 0.0772029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098458Jy sigma=0.000879 ! Fit after self-cal, rms=0.098431Jy sigma=0.000879 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=4.505 mas, bpa=72.96 degrees ! Estimated noise=447.976 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 4.505 at 72.96 degrees (North through East) ! Clean map min=-0.0019693 max=0.061377 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=3.673 mas, bpa=-60.75 degrees ! Estimated noise=806.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464202 Jy ! Component: 100 - total flux cleaned = 0.0575881 Jy ! Component: 150 - total flux cleaned = 0.0637058 Jy ! Component: 200 - total flux cleaned = 0.0682959 Jy ! Total flux subtracted in 200 components = 0.0682959 Jy ! Clean residual min=-0.003279 max=0.004344 Jy/beam ! Clean residual mean=-0.000005 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0682959 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0682959 Jy ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=4.505 mas, bpa=72.96 degrees ! Estimated noise=447.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403303 Jy ! Component: 100 - total flux cleaned = 0.00568924 Jy ! Component: 150 - total flux cleaned = 0.00653256 Jy ! Component: 200 - total flux cleaned = 0.00711754 Jy ! Total flux subtracted in 200 components = 0.00711754 Jy ! Clean residual min=-0.001725 max=0.002132 Jy/beam ! Clean residual mean=-0.000003 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0754134 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.0754134 Jy ! Inverting map ! Added new window around map position (-12.5, 48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000755154 Jy ! Component: 100 - total flux cleaned = 0.000938885 Jy ! Component: 150 - total flux cleaned = 0.000995539 Jy ! Component: 200 - total flux cleaned = 0.00104911 Jy ! Total flux subtracted in 200 components = 0.00104911 Jy ! Clean residual min=-0.001603 max=0.001720 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0764625 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 80 components and 0.0764625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.26 mas, bmaj=9.01 mas, bpa=66.79 degrees ! Estimated noise=536.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569593 Jy ! Component: 100 - total flux cleaned = 0.000486471 Jy ! Component: 150 - total flux cleaned = 0.000375376 Jy ! Component: 200 - total flux cleaned = 0.000376346 Jy ! Total flux subtracted in 200 components = 0.000376346 Jy ! Clean residual min=-0.001615 max=0.001778 Jy/beam ! Clean residual mean=-0.000006 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0768389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.25967e-07 Jy ! Component: 100 - total flux cleaned = -1.57159e-06 Jy ! Component: 150 - total flux cleaned = -1.20718e-06 Jy ! Component: 200 - total flux cleaned = 2.52623e-05 Jy ! Total flux subtracted in 200 components = 2.52623e-05 Jy ! Clean residual min=-0.001620 max=0.001756 Jy/beam ! Clean residual mean=-0.000006 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0768642 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 115 components and 0.0768642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.374 mas, bmaj=4.505 mas, bpa=72.96 degrees ! Estimated noise=447.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153798 Jy ! Component: 100 - total flux cleaned = 0.000239127 Jy ! Component: 150 - total flux cleaned = 0.000354631 Jy ! Component: 200 - total flux cleaned = 0.000391578 Jy ! Total flux subtracted in 200 components = 0.000391578 Jy ! Clean residual min=-0.001494 max=0.001614 Jy/beam ! Clean residual mean=-0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0772557 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 136 components and 0.0772557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098352Jy sigma=0.000879 ! Fit after self-cal, rms=0.098287Jy sigma=0.000879 wmodel J1359+5544_S_2014_12_20_pus_map.mod ! Writing 136 model components to file: J1359+5544_S_2014_12_20_pus_map.mod wobs J1359+5544_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1359+5544_S_2014_12_20_pus_uvs.fits wwins J1359+5544_S_2014_12_20_pus_map.win ! wwins: Wrote 6 windows to J1359+5544_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585881 Jy ! Component: 100 - total flux cleaned = 0.00113334 Jy ! Component: 150 - total flux cleaned = 0.00152599 Jy ! Component: 200 - total flux cleaned = 0.00188031 Jy ! Component: 250 - total flux cleaned = 0.00224796 Jy ! Component: 300 - total flux cleaned = 0.00263054 Jy ! Component: 350 - total flux cleaned = 0.00302808 Jy ! Component: 400 - total flux cleaned = 0.00343983 Jy ! Component: 450 - total flux cleaned = 0.00375398 Jy ! Component: 500 - total flux cleaned = 0.00406274 Jy ! Component: 550 - total flux cleaned = 0.00434458 Jy ! Component: 600 - total flux cleaned = 0.00464276 Jy ! Component: 650 - total flux cleaned = 0.00483173 Jy ! Component: 700 - total flux cleaned = 0.00505958 Jy ! Component: 750 - total flux cleaned = 0.0052436 Jy ! Component: 800 - total flux cleaned = 0.00542518 Jy ! Component: 850 - total flux cleaned = 0.00558434 Jy ! Component: 900 - total flux cleaned = 0.00572233 Jy ! Component: 950 - total flux cleaned = 0.00591655 Jy ! Component: 1000 - total flux cleaned = 0.00605085 Jy ! Component: 1050 - total flux cleaned = 0.0062595 Jy ! Component: 1100 - total flux cleaned = 0.00648438 Jy ! Component: 1150 - total flux cleaned = 0.00655838 Jy ! Component: 1200 - total flux cleaned = 0.00670548 Jy ! Component: 1250 - total flux cleaned = 0.00685105 Jy ! Component: 1300 - total flux cleaned = 0.00703099 Jy ! Component: 1350 - total flux cleaned = 0.00713808 Jy ! Component: 1400 - total flux cleaned = 0.00724435 Jy ! Component: 1450 - total flux cleaned = 0.00736742 Jy ! Component: 1500 - total flux cleaned = 0.00745432 Jy ! Component: 1550 - total flux cleaned = 0.0075578 Jy ! Component: 1600 - total flux cleaned = 0.00760911 Jy ! Component: 1650 - total flux cleaned = 0.00767727 Jy ! Component: 1700 - total flux cleaned = 0.00784553 Jy ! Component: 1750 - total flux cleaned = 0.00797903 Jy ! Component: 1800 - total flux cleaned = 0.0080949 Jy ! Component: 1850 - total flux cleaned = 0.00817714 Jy ! Component: 1900 - total flux cleaned = 0.00829139 Jy ! Component: 1950 - total flux cleaned = 0.00842098 Jy ! Component: 2000 - total flux cleaned = 0.0084855 Jy ! Component: 2050 - total flux cleaned = 0.00859727 Jy ! Component: 2100 - total flux cleaned = 0.00872418 Jy ! Component: 2150 - total flux cleaned = 0.00878718 Jy ! Component: 2200 - total flux cleaned = 0.00892793 Jy ! Component: 2250 - total flux cleaned = 0.00902112 Jy ! Component: 2300 - total flux cleaned = 0.0091138 Jy ! Component: 2350 - total flux cleaned = 0.00925188 Jy ! Component: 2400 - total flux cleaned = 0.00931276 Jy ! Component: 2450 - total flux cleaned = 0.00941874 Jy ! Component: 2500 - total flux cleaned = 0.00949411 Jy ! Component: 2550 - total flux cleaned = 0.00964367 Jy ! Component: 2600 - total flux cleaned = 0.00971783 Jy ! Component: 2650 - total flux cleaned = 0.00985075 Jy ! Component: 2700 - total flux cleaned = 0.009939 Jy ! Component: 2750 - total flux cleaned = 0.0100121 Jy ! Component: 2800 - total flux cleaned = 0.0101862 Jy ! Component: 2850 - total flux cleaned = 0.0102439 Jy ! Component: 2900 - total flux cleaned = 0.0104159 Jy ! Component: 2950 - total flux cleaned = 0.0104731 Jy ! Component: 3000 - total flux cleaned = 0.0106009 Jy ! Component: 3050 - total flux cleaned = 0.0106715 Jy ! Component: 3100 - total flux cleaned = 0.0107838 Jy ! Component: 3150 - total flux cleaned = 0.0109095 Jy ! Component: 3200 - total flux cleaned = 0.0110067 Jy ! Component: 3250 - total flux cleaned = 0.0111311 Jy ! Component: 3300 - total flux cleaned = 0.0111998 Jy ! Component: 3350 - total flux cleaned = 0.0112409 Jy ! Component: 3400 - total flux cleaned = 0.0113499 Jy ! Component: 3450 - total flux cleaned = 0.0114447 Jy ! Component: 3500 - total flux cleaned = 0.0115122 Jy ! Component: 3550 - total flux cleaned = 0.0115928 Jy ! Component: 3600 - total flux cleaned = 0.0117132 Jy ! Component: 3650 - total flux cleaned = 0.0117665 Jy ! Component: 3700 - total flux cleaned = 0.0118326 Jy ! Component: 3750 - total flux cleaned = 0.0119118 Jy ! Component: 3800 - total flux cleaned = 0.0120168 Jy ! Component: 3850 - total flux cleaned = 0.0120689 Jy ! Component: 3900 - total flux cleaned = 0.0121209 Jy ! Component: 3950 - total flux cleaned = 0.0121598 Jy ! Component: 4000 - total flux cleaned = 0.0122502 Jy ! Component: 4050 - total flux cleaned = 0.0122886 Jy ! Total flux subtracted in 4096 components = 0.0123525 Jy ! Clean residual min=-0.000842 max=0.000808 Jy/beam ! Clean residual mean=-0.000008 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0896083 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 424 components and 0.0896083 Jy ![Exited script file: muppet] wmap "J1359+5544_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 4.505 at 72.96 degrees (North through East) ! Clean map min=-0.002022 max=0.061501 Jy/beam ! Writing clean map to FITS file: J1359+5544_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0615008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230096 device "J1359+5544_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1359+5544_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12241 1.12241 2.24481 4.48963 8.97925 17.9585 35.917 71.834 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.374 x 4.505 at 72.96 degrees (North through East) ! Clean map min=-0.002022 max=0.061501 Jy/beam quit ! Quitting program ! Log file J1359+5544_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:37:31 2016