! Started logfile: J1335+5844_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:36:49 2016 obs J1335+5844_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1335+5844_S_2014_12_20_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882143 visibilities/baseline/integration-bin. ! Found source: J1335+5844 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 8892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1335+5844_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.725704Jy sigma=0.008329 ! Fit after self-cal, rms=0.691913Jy sigma=0.007942 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=3.621 mas, bpa=86.5 degrees ! Estimated noise=993.678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234638 Jy ! Component: 100 - total flux cleaned = 0.310603 Jy ! Total flux subtracted in 100 components = 0.310603 Jy ! Clean residual min=-0.024006 max=0.094539 Jy/beam ! Clean residual mean=-0.000123 rms=0.007102 Jy/beam ! Combined flux in latest and established models = 0.310603 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.310603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162332Jy sigma=0.001768 ! Fit after self-cal, rms=0.162321Jy sigma=0.001767 ! Inverting map ! Added new window around map position (4.5, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769322 Jy ! Component: 100 - total flux cleaned = 0.112748 Jy ! Total flux subtracted in 100 components = 0.112748 Jy ! Clean residual min=-0.017484 max=0.028316 Jy/beam ! Clean residual mean=-0.000073 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 0.423351 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.423351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117056Jy sigma=0.001251 ! Fit after self-cal, rms=0.110742Jy sigma=0.001177 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283036 Jy ! Component: 100 - total flux cleaned = 0.0449565 Jy ! Total flux subtracted in 100 components = 0.0449565 Jy ! Clean residual min=-0.011589 max=0.012321 Jy/beam ! Clean residual mean=-0.000054 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.468307 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.468307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099288Jy sigma=0.001051 ! Fit after self-cal, rms=0.098359Jy sigma=0.001040 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.19 mas, bmaj=4.326 mas, bpa=-84.7 degrees ! Estimated noise=656.382 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228033 Jy ! Component: 100 - total flux cleaned = 0.0376192 Jy ! Component: 150 - total flux cleaned = 0.0483058 Jy ! Component: 200 - total flux cleaned = 0.0562211 Jy ! Total flux subtracted in 200 components = 0.0562211 Jy ! Clean residual min=-0.013560 max=0.011695 Jy/beam ! Clean residual mean=-0.000061 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.524528 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 69 components and 0.524528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090901Jy sigma=0.000970 ! Fit after self-cal, rms=0.090573Jy sigma=0.000966 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 0.96 KP 1.07 ! LA 0.94 MK 1.03 NL 0.97 OV 0.99 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.08 HN 1.00 KP 1.02 ! LA 0.91 MK 1.02 NL 1.07 OV 1.01 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.22 HN 1.00 KP 0.91 ! LA 0.73 MK 1.03 NL 1.20 OV 0.93 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.08 HN 0.96 KP 0.88 ! LA 0.78 MK 0.99 NL 0.97 OV 1.01 ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.090573Jy sigma=0.000966 ! Fit after self-cal, rms=0.073677Jy sigma=0.000801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.241 mas, bmaj=4.374 mas, bpa=-80.09 degrees ! Estimated noise=654.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372037 Jy ! Component: 100 - total flux cleaned = 0.0034876 Jy ! Component: 150 - total flux cleaned = 0.00315984 Jy ! Component: 200 - total flux cleaned = 0.00302076 Jy ! Total flux subtracted in 200 components = 0.00302076 Jy ! Clean residual min=-0.004748 max=0.004648 Jy/beam ! Clean residual mean=-0.000052 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.527549 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.527549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073257Jy sigma=0.000796 ! Fit after self-cal, rms=0.073175Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073175Jy sigma=0.000795 ! Fit after self-cal, rms=0.072475Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=4.371 mas, bpa=-81.48 degrees ! Estimated noise=655.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938568 Jy ! Component: 100 - total flux cleaned = 0.00130966 Jy ! Component: 150 - total flux cleaned = 0.00131081 Jy ! Component: 200 - total flux cleaned = 0.00131239 Jy ! Total flux subtracted in 200 components = 0.00131239 Jy ! Clean residual min=-0.002374 max=0.002687 Jy/beam ! Clean residual mean=-0.000003 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.528861 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.528862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072322Jy sigma=0.000778 ! Fit after self-cal, rms=0.072307Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507827 Jy ! Component: 100 - total flux cleaned = 0.000505726 Jy ! Component: 150 - total flux cleaned = 0.000549714 Jy ! Component: 200 - total flux cleaned = 0.000550726 Jy ! Total flux subtracted in 200 components = 0.000550726 Jy ! Clean residual min=-0.002299 max=0.002401 Jy/beam ! Clean residual mean=-0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.529412 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.529412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072247Jy sigma=0.000778 ! Fit after self-cal, rms=0.072237Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072237Jy sigma=0.000777 ! Fit after self-cal, rms=0.072254Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=4.368 mas, bpa=-85.1 degrees ! Estimated noise=655.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.1075e-05 Jy ! Component: 100 - total flux cleaned = 5.67703e-05 Jy ! Component: 150 - total flux cleaned = 0.000165336 Jy ! Component: 200 - total flux cleaned = 0.000196207 Jy ! Total flux subtracted in 200 components = 0.000196207 Jy ! Clean residual min=-0.002230 max=0.002170 Jy/beam ! Clean residual mean=-0.000003 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.529608 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.529608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072205Jy sigma=0.000777 ! Fit after self-cal, rms=0.072201Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225563 Jy ! Component: 100 - total flux cleaned = 0.000283504 Jy ! Component: 150 - total flux cleaned = 0.000309678 Jy ! Component: 200 - total flux cleaned = 0.000309288 Jy ! Total flux subtracted in 200 components = 0.000309288 Jy ! Clean residual min=-0.002147 max=0.002092 Jy/beam ! Clean residual mean=-0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.529918 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 98 components and 0.529918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072178Jy sigma=0.000776 ! Fit after self-cal, rms=0.072175Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072175Jy sigma=0.000776 ! Fit after self-cal, rms=0.072191Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.169 mas, bmaj=8.783 mas, bpa=66.06 degrees ! Estimated noise=802.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225866 Jy ! Component: 100 - total flux cleaned = 0.000282354 Jy ! Component: 150 - total flux cleaned = 0.000305257 Jy ! Component: 200 - total flux cleaned = 0.000340383 Jy ! Total flux subtracted in 200 components = 0.000340383 Jy ! Clean residual min=-0.002771 max=0.002105 Jy/beam ! Clean residual mean=-0.000006 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.530258 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 102 components and 0.530258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072179Jy sigma=0.000776 ! Fit after self-cal, rms=0.072177Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258078 Jy ! Component: 100 - total flux cleaned = 0.000347873 Jy ! Component: 150 - total flux cleaned = 0.000383621 Jy ! Component: 200 - total flux cleaned = 0.000424242 Jy ! Total flux subtracted in 200 components = 0.000424242 Jy ! Clean residual min=-0.002738 max=0.002138 Jy/beam ! Clean residual mean=-0.000005 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.530682 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 105 components and 0.530682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072176Jy sigma=0.000776 ! Fit after self-cal, rms=0.072176Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=4.367 mas, bpa=-88 degrees ! Estimated noise=655.273 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.251 x 4.367 at -88 degrees (North through East) ! Clean map min=-0.0020344 max=0.30352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=3.643 mas, bpa=84.01 degrees ! Estimated noise=998.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240282 Jy ! Component: 100 - total flux cleaned = 0.339494 Jy ! Component: 150 - total flux cleaned = 0.394848 Jy ! Component: 200 - total flux cleaned = 0.43018 Jy ! Total flux subtracted in 200 components = 0.43018 Jy ! Clean residual min=-0.007742 max=0.019103 Jy/beam ! Clean residual mean=-0.000050 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.430181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.430181 Jy ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=4.367 mas, bpa=-88 degrees ! Estimated noise=655.273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333794 Jy ! Component: 100 - total flux cleaned = 0.0543477 Jy ! Component: 150 - total flux cleaned = 0.0683419 Jy ! Component: 200 - total flux cleaned = 0.0778061 Jy ! Total flux subtracted in 200 components = 0.0778061 Jy ! Clean residual min=-0.003170 max=0.005179 Jy/beam ! Clean residual mean=-0.000028 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.507987 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 49 components and 0.507987 Jy ! Inverting map ! Added new window around map position (-3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649235 Jy ! Component: 100 - total flux cleaned = 0.0109901 Jy ! Component: 150 - total flux cleaned = 0.0141978 Jy ! Component: 200 - total flux cleaned = 0.0165245 Jy ! Total flux subtracted in 200 components = 0.0165245 Jy ! Clean residual min=-0.002245 max=0.002050 Jy/beam ! Clean residual mean=-0.000010 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.524511 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.524511 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.169 mas, bmaj=8.783 mas, bpa=66.06 degrees ! Estimated noise=802.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027615 Jy ! Component: 100 - total flux cleaned = 0.00447701 Jy ! Component: 150 - total flux cleaned = 0.00559998 Jy ! Component: 200 - total flux cleaned = 0.00635088 Jy ! Total flux subtracted in 200 components = 0.00635088 Jy ! Clean residual min=-0.002600 max=0.002047 Jy/beam ! Clean residual mean=-0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.530862 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282585 Jy ! Component: 100 - total flux cleaned = 0.000486318 Jy ! Component: 150 - total flux cleaned = 0.000569966 Jy ! Component: 200 - total flux cleaned = 0.000631038 Jy ! Total flux subtracted in 200 components = 0.000631038 Jy ! Clean residual min=-0.002516 max=0.002040 Jy/beam ! Clean residual mean=-0.000003 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.531493 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 101 components and 0.531493 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=4.367 mas, bpa=-88 degrees ! Estimated noise=655.273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000487272 Jy ! Component: 100 - total flux cleaned = -0.000525943 Jy ! Component: 150 - total flux cleaned = -0.000559193 Jy ! Component: 200 - total flux cleaned = -0.00052801 Jy ! Total flux subtracted in 200 components = -0.00052801 Jy ! Clean residual min=-0.002108 max=0.001975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.530965 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.530965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072162Jy sigma=0.000776 ! Fit after self-cal, rms=0.072152Jy sigma=0.000776 wmodel J1335+5844_S_2014_12_20_pus_map.mod ! Writing 120 model components to file: J1335+5844_S_2014_12_20_pus_map.mod wobs J1335+5844_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1335+5844_S_2014_12_20_pus_uvs.fits wwins J1335+5844_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J1335+5844_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182645 Jy ! Component: 100 - total flux cleaned = -0.000617871 Jy ! Component: 150 - total flux cleaned = -0.000904569 Jy ! Component: 200 - total flux cleaned = -0.00108856 Jy ! Component: 250 - total flux cleaned = -0.0012381 Jy ! Component: 300 - total flux cleaned = -0.00135466 Jy ! Component: 350 - total flux cleaned = -0.00152519 Jy ! Component: 400 - total flux cleaned = -0.0015802 Jy ! Component: 450 - total flux cleaned = -0.00166194 Jy ! Component: 500 - total flux cleaned = -0.00176766 Jy ! Component: 550 - total flux cleaned = -0.00184557 Jy ! Component: 600 - total flux cleaned = -0.00194761 Jy ! Component: 650 - total flux cleaned = -0.00204803 Jy ! Component: 700 - total flux cleaned = -0.00204812 Jy ! Component: 750 - total flux cleaned = -0.00207261 Jy ! Component: 800 - total flux cleaned = -0.00209675 Jy ! Component: 850 - total flux cleaned = -0.00221465 Jy ! Component: 900 - total flux cleaned = -0.00228389 Jy ! Component: 950 - total flux cleaned = -0.00228379 Jy ! Component: 1000 - total flux cleaned = -0.00228364 Jy ! Component: 1050 - total flux cleaned = -0.00228382 Jy ! Component: 1100 - total flux cleaned = -0.0021738 Jy ! Component: 1150 - total flux cleaned = -0.00215255 Jy ! Component: 1200 - total flux cleaned = -0.0021314 Jy ! Component: 1250 - total flux cleaned = -0.0020891 Jy ! Component: 1300 - total flux cleaned = -0.00202671 Jy ! Component: 1350 - total flux cleaned = -0.00204739 Jy ! Component: 1400 - total flux cleaned = -0.00202662 Jy ! Component: 1450 - total flux cleaned = -0.00198597 Jy ! Component: 1500 - total flux cleaned = -0.00192584 Jy ! Component: 1550 - total flux cleaned = -0.00190589 Jy ! Component: 1600 - total flux cleaned = -0.00192538 Jy ! Component: 1650 - total flux cleaned = -0.00188653 Jy ! Component: 1700 - total flux cleaned = -0.00184829 Jy ! Component: 1750 - total flux cleaned = -0.00182908 Jy ! Component: 1800 - total flux cleaned = -0.00181019 Jy ! Component: 1850 - total flux cleaned = -0.00179131 Jy ! Component: 1900 - total flux cleaned = -0.00175452 Jy ! Component: 1950 - total flux cleaned = -0.00173629 Jy ! Component: 2000 - total flux cleaned = -0.00177241 Jy ! Component: 2050 - total flux cleaned = -0.00179011 Jy ! Component: 2100 - total flux cleaned = -0.00171899 Jy ! Component: 2150 - total flux cleaned = -0.00166639 Jy ! Component: 2200 - total flux cleaned = -0.00180614 Jy ! Component: 2250 - total flux cleaned = -0.00178892 Jy ! Component: 2300 - total flux cleaned = -0.0018063 Jy ! Component: 2350 - total flux cleaned = -0.00184042 Jy ! Component: 2400 - total flux cleaned = -0.00182367 Jy ! Component: 2450 - total flux cleaned = -0.00192446 Jy ! Component: 2500 - total flux cleaned = -0.00190778 Jy ! Component: 2550 - total flux cleaned = -0.00197383 Jy ! Component: 2600 - total flux cleaned = -0.00197391 Jy ! Component: 2650 - total flux cleaned = -0.00199037 Jy ! Component: 2700 - total flux cleaned = -0.00202266 Jy ! Component: 2750 - total flux cleaned = -0.0020226 Jy ! Component: 2800 - total flux cleaned = -0.0020388 Jy ! Component: 2850 - total flux cleaned = -0.00207038 Jy ! Component: 2900 - total flux cleaned = -0.00207036 Jy ! Component: 2950 - total flux cleaned = -0.00213295 Jy ! Component: 3000 - total flux cleaned = -0.00222571 Jy ! Component: 3050 - total flux cleaned = -0.00227164 Jy ! Component: 3100 - total flux cleaned = -0.0022867 Jy ! Component: 3150 - total flux cleaned = -0.0022262 Jy ! Component: 3200 - total flux cleaned = -0.00234654 Jy ! Component: 3250 - total flux cleaned = -0.00236146 Jy ! Component: 3300 - total flux cleaned = -0.00236168 Jy ! Component: 3350 - total flux cleaned = -0.00236172 Jy ! Component: 3400 - total flux cleaned = -0.00240568 Jy ! Component: 3450 - total flux cleaned = -0.00246411 Jy ! Component: 3500 - total flux cleaned = -0.00247845 Jy ! Component: 3550 - total flux cleaned = -0.00249267 Jy ! Component: 3600 - total flux cleaned = -0.00252122 Jy ! Component: 3650 - total flux cleaned = -0.00247863 Jy ! Component: 3700 - total flux cleaned = -0.00249276 Jy ! Component: 3750 - total flux cleaned = -0.00253468 Jy ! Component: 3800 - total flux cleaned = -0.00252065 Jy ! Component: 3850 - total flux cleaned = -0.00250673 Jy ! Component: 3900 - total flux cleaned = -0.00250666 Jy ! Component: 3950 - total flux cleaned = -0.00253392 Jy ! Component: 4000 - total flux cleaned = -0.00249314 Jy ! Component: 4050 - total flux cleaned = -0.00249315 Jy ! Total flux subtracted in 4096 components = -0.00254685 Jy ! Clean residual min=-0.000775 max=0.000728 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.528418 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 410 components and 0.528418 Jy ![Exited script file: muppet] wmap "J1335+5844_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.251 x 4.367 at -88 degrees (North through East) ! Clean map min=-0.0015537 max=0.30545 Jy/beam ! Writing clean map to FITS file: J1335+5844_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.305454 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238954 device "J1335+5844_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1335+5844_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234687 0.234687 0.469374 0.938747 1.87749 3.75499 7.50998 15.02 30.0399 60.0798 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.305 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.251 x 4.367 at -88 degrees (North through East) ! Clean map min=-0.0015537 max=0.30545 Jy/beam quit ! Quitting program ! Log file J1335+5844_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:36:55 2016