! Started logfile: J1316-3338_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:36:21 2016
obs J1316-3338_S_2014_12_20_pus_uva.fits
! Reading UV FITS file: J1316-3338_S_2014_12_20_pus_uva.fits
! AN table 1: 53 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.606289 visibilities/baseline/integration-bin.
! Found source: J1316-3338
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 5784 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1316-3338_S_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 124 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 124 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 124 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 124 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.706012Jy  sigma=0.005463
! Fit after  self-cal, rms=0.672817Jy  sigma=0.005171
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.659 mas, bmaj=8.246 mas, bpa=3.402 degrees
! Estimated noise=1777.09 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236025 Jy
! Component: 100  -  total flux cleaned = 0.319308 Jy
! Total flux subtracted in 100 components = 0.319308 Jy
! Clean residual min=-0.021042 max=0.054468 Jy/beam
! Clean residual mean=0.000157 rms=0.006825 Jy/beam
! Combined flux in latest and established models = 0.319308 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.319308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185105Jy  sigma=0.001416
! Fit after  self-cal, rms=0.184993Jy  sigma=0.001415
! Inverting map 
! Added new window around map position (-4, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0560492 Jy
! Component: 100  -  total flux cleaned = 0.0926962 Jy
! Total flux subtracted in 100 components = 0.0926962 Jy
! Clean residual min=-0.016300 max=0.037814 Jy/beam
! Clean residual mean=0.000073 rms=0.004621 Jy/beam
! Combined flux in latest and established models = 0.412004 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.412004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151491Jy  sigma=0.001111
! Fit after  self-cal, rms=0.150049Jy  sigma=0.001101
! Inverting map 
! Added new window around map position (4, -8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330231 Jy
! Component: 100  -  total flux cleaned = 0.0553168 Jy
! Total flux subtracted in 100 components = 0.0553168 Jy
! Clean residual min=-0.014495 max=0.019401 Jy/beam
! Clean residual mean=0.000027 rms=0.003418 Jy/beam
! Combined flux in latest and established models = 0.467321 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.467321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135678Jy  sigma=0.000978
! Fit after  self-cal, rms=0.135555Jy  sigma=0.000977
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=10.53 mas, bpa=5.684 degrees
! Estimated noise=1197.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331734 Jy
! Component: 100  -  total flux cleaned = 0.0533473 Jy
! Component: 150  -  total flux cleaned = 0.0661334 Jy
! Component: 200  -  total flux cleaned = 0.0743423 Jy
! Total flux subtracted in 200 components = 0.0743423 Jy
! Clean residual min=-0.017257 max=0.018075 Jy/beam
! Clean residual mean=-0.000191 rms=0.004375 Jy/beam
! Combined flux in latest and established models = 0.541663 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 96 components and 0.541663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125924Jy  sigma=0.000906
! Fit after  self-cal, rms=0.125788Jy  sigma=0.000905
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.87     HN        1.02     KP        1.09     
!   LA        0.94     MK        1.03     NL        1.08     OV        0.97     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.05     HN        1.07     KP        1.05     
!   LA        0.91     MK        1.04     NL        1.13     OV        1.01     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.18     HN        1.13     KP        0.94     
!   LA        0.74     MK        1.04     NL        1.17     OV        0.93     
!   PT        1.01     SC        1.10     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.04     HN        1.00     KP        0.89     
!   LA        0.82     MK        1.06     NL        1.07     OV        0.97     
!   PT        1.03     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.125788Jy  sigma=0.000905
! Fit after  self-cal, rms=0.114985Jy  sigma=0.000797
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=10.74 mas, bpa=6.156 degrees
! Estimated noise=1220.72 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00809364 Jy
! Component: 100  -  total flux cleaned = 0.00784529 Jy
! Component: 150  -  total flux cleaned = 0.00805454 Jy
! Component: 200  -  total flux cleaned = 0.00824619 Jy
! Total flux subtracted in 200 components = 0.00824619 Jy
! Clean residual min=-0.006651 max=0.006718 Jy/beam
! Clean residual mean=0.000041 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 0.549909 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 119 components and 0.549909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113569Jy  sigma=0.000786
! Fit after  self-cal, rms=0.113463Jy  sigma=0.000785
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113463Jy  sigma=0.000785
! Fit after  self-cal, rms=0.113780Jy  sigma=0.000779
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.485 mas, bmaj=10.7 mas, bpa=6.362 degrees
! Estimated noise=1218.51 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129422 Jy
! Component: 100  -  total flux cleaned = 0.00145492 Jy
! Component: 150  -  total flux cleaned = 0.00161308 Jy
! Component: 200  -  total flux cleaned = 0.0018784 Jy
! Total flux subtracted in 200 components = 0.0018784 Jy
! Clean residual min=-0.005832 max=0.005294 Jy/beam
! Clean residual mean=0.000024 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 0.551788 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 130 components and 0.551788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113236Jy  sigma=0.000774
! Fit after  self-cal, rms=0.113160Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201491 Jy
! Component: 100  -  total flux cleaned = 0.000565424 Jy
! Component: 150  -  total flux cleaned = 0.000568382 Jy
! Component: 200  -  total flux cleaned = 0.000572579 Jy
! Total flux subtracted in 200 components = 0.000572579 Jy
! Clean residual min=-0.005429 max=0.004947 Jy/beam
! Clean residual mean=0.000024 rms=0.001372 Jy/beam
! Combined flux in latest and established models = 0.55236 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 0.55236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112912Jy  sigma=0.000772
! Fit after  self-cal, rms=0.112870Jy  sigma=0.000772
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112870Jy  sigma=0.000772
! Fit after  self-cal, rms=0.115690Jy  sigma=0.000767
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=10.67 mas, bpa=6.464 degrees
! Estimated noise=1217.35 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000689926 Jy
! Component: 100  -  total flux cleaned = -0.000910453 Jy
! Component: 150  -  total flux cleaned = -0.00119126 Jy
! Component: 200  -  total flux cleaned = -0.00119193 Jy
! Total flux subtracted in 200 components = -0.00119193 Jy
! Clean residual min=-0.004783 max=0.004098 Jy/beam
! Clean residual mean=0.000003 rms=0.001162 Jy/beam
! Combined flux in latest and established models = 0.551168 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 158 components and 0.551168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115476Jy  sigma=0.000766
! Fit after  self-cal, rms=0.115488Jy  sigma=0.000765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.4149e-05 Jy
! Component: 100  -  total flux cleaned = 2.39124e-05 Jy
! Component: 150  -  total flux cleaned = -4.43632e-05 Jy
! Component: 200  -  total flux cleaned = -4.56706e-05 Jy
! Total flux subtracted in 200 components = -4.56706e-05 Jy
! Clean residual min=-0.004567 max=0.003905 Jy/beam
! Clean residual mean=0.000002 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.551123 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 176 components and 0.551122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115381Jy  sigma=0.000765
! Fit after  self-cal, rms=0.115368Jy  sigma=0.000765
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115368Jy  sigma=0.000765
! Fit after  self-cal, rms=0.116420Jy  sigma=0.000764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.388 mas, bmaj=25.55 mas, bpa=2.321 degrees
! Estimated noise=1425.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149987 Jy
! Component: 100  -  total flux cleaned = -0.00176446 Jy
! Component: 150  -  total flux cleaned = -0.00181556 Jy
! Component: 200  -  total flux cleaned = -0.00181691 Jy
! Total flux subtracted in 200 components = -0.00181691 Jy
! Clean residual min=-0.005118 max=0.004034 Jy/beam
! Clean residual mean=0.000006 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.549306 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 192 components and 0.549306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116357Jy  sigma=0.000764
! Fit after  self-cal, rms=0.116358Jy  sigma=0.000764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.04604e-05 Jy
! Component: 100  -  total flux cleaned = 0.0002097 Jy
! Component: 150  -  total flux cleaned = 0.000210245 Jy
! Component: 200  -  total flux cleaned = 0.000209089 Jy
! Total flux subtracted in 200 components = 0.000209089 Jy
! Clean residual min=-0.005087 max=0.003901 Jy/beam
! Clean residual mean=0.000006 rms=0.001248 Jy/beam
! Combined flux in latest and established models = 0.549515 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 206 components and 0.549515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116332Jy  sigma=0.000764
! Fit after  self-cal, rms=0.116329Jy  sigma=0.000764
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=10.65 mas, bpa=6.493 degrees
! Estimated noise=1216.6 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.477 x 10.65 at 6.493 degrees (North through East)
! Clean map  min=-0.0058904  max=0.30552 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.663 mas, bmaj=8.203 mas, bpa=4.031 degrees
! Estimated noise=1826.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.240595 Jy
! Component: 100  -  total flux cleaned = 0.329137 Jy
! Component: 150  -  total flux cleaned = 0.383971 Jy
! Component: 200  -  total flux cleaned = 0.421809 Jy
! Total flux subtracted in 200 components = 0.421809 Jy
! Clean residual min=-0.010577 max=0.024630 Jy/beam
! Clean residual mean=0.000078 rms=0.003558 Jy/beam
! Combined flux in latest and established models = 0.421809 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.421809 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=10.65 mas, bpa=6.493 degrees
! Estimated noise=1216.6 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0460177 Jy
! Component: 100  -  total flux cleaned = 0.0727871 Jy
! Component: 150  -  total flux cleaned = 0.0900945 Jy
! Component: 200  -  total flux cleaned = 0.101654 Jy
! Total flux subtracted in 200 components = 0.101654 Jy
! Clean residual min=-0.006112 max=0.007881 Jy/beam
! Clean residual mean=-0.000025 rms=0.001719 Jy/beam
! Combined flux in latest and established models = 0.523464 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 100 components and 0.523464 Jy
! Inverting map 
! Added new window around map position (-5, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848703 Jy
! Component: 100  -  total flux cleaned = 0.014368 Jy
! Component: 150  -  total flux cleaned = 0.0186201 Jy
! Component: 200  -  total flux cleaned = 0.0217151 Jy
! Total flux subtracted in 200 components = 0.0217151 Jy
! Clean residual min=-0.004584 max=0.003765 Jy/beam
! Clean residual mean=0.000003 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.545179 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 122 components and 0.545178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.388 mas, bmaj=25.55 mas, bpa=2.321 degrees
! Estimated noise=1425.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307751 Jy
! Component: 100  -  total flux cleaned = 0.00470386 Jy
! Component: 150  -  total flux cleaned = 0.00497072 Jy
! Component: 200  -  total flux cleaned = 0.0050085 Jy
! Total flux subtracted in 200 components = 0.0050085 Jy
! Clean residual min=-0.004904 max=0.004010 Jy/beam
! Clean residual mean=0.000015 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.550187 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.16498e-06 Jy
! Component: 100  -  total flux cleaned = -1.84809e-06 Jy
! Component: 150  -  total flux cleaned = -1.29746e-06 Jy
! Component: 200  -  total flux cleaned = 2.56749e-05 Jy
! Total flux subtracted in 200 components = 2.56749e-05 Jy
! Clean residual min=-0.004926 max=0.003946 Jy/beam
! Clean residual mean=0.000013 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.550213 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 150 components and 0.550213 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=10.65 mas, bpa=6.493 degrees
! Estimated noise=1216.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.3421e-05 Jy
! Component: 100  -  total flux cleaned = 7.39638e-05 Jy
! Component: 150  -  total flux cleaned = 0.000126445 Jy
! Component: 200  -  total flux cleaned = 0.000126772 Jy
! Total flux subtracted in 200 components = 0.000126772 Jy
! Clean residual min=-0.004059 max=0.003981 Jy/beam
! Clean residual mean=0.000008 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.550339 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 165 components and 0.55034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116258Jy  sigma=0.000762
! Fit after  self-cal, rms=0.116221Jy  sigma=0.000762
wmodel J1316-3338_S_2014_12_20_pus_map.mod
! Writing 165 model components to file: J1316-3338_S_2014_12_20_pus_map.mod
wobs J1316-3338_S_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J1316-3338_S_2014_12_20_pus_uvs.fits
wwins J1316-3338_S_2014_12_20_pus_map.win
! wwins: Wrote 5 windows to J1316-3338_S_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000943103 Jy
! Component: 100  -  total flux cleaned = -0.00186409 Jy
! Component: 150  -  total flux cleaned = -0.00211311 Jy
! Component: 200  -  total flux cleaned = -0.00205578 Jy
! Component: 250  -  total flux cleaned = -0.00233066 Jy
! Component: 300  -  total flux cleaned = -0.0026995 Jy
! Component: 350  -  total flux cleaned = -0.00315806 Jy
! Component: 400  -  total flux cleaned = -0.00345551 Jy
! Component: 450  -  total flux cleaned = -0.00379449 Jy
! Component: 500  -  total flux cleaned = -0.00407909 Jy
! Component: 550  -  total flux cleaned = -0.0043579 Jy
! Component: 600  -  total flux cleaned = -0.00467607 Jy
! Component: 650  -  total flux cleaned = -0.00498713 Jy
! Component: 700  -  total flux cleaned = -0.00524907 Jy
! Component: 750  -  total flux cleaned = -0.00559116 Jy
! Component: 800  -  total flux cleaned = -0.00571699 Jy
! Component: 850  -  total flux cleaned = -0.00604615 Jy
! Component: 900  -  total flux cleaned = -0.00616761 Jy
! Component: 950  -  total flux cleaned = -0.00636751 Jy
! Component: 1000  -  total flux cleaned = -0.00652472 Jy
! Component: 1050  -  total flux cleaned = -0.00671823 Jy
! Component: 1100  -  total flux cleaned = -0.00679481 Jy
! Component: 1150  -  total flux cleaned = -0.00683383 Jy
! Component: 1200  -  total flux cleaned = -0.00716871 Jy
! Component: 1250  -  total flux cleaned = -0.00720479 Jy
! Component: 1300  -  total flux cleaned = -0.00734974 Jy
! Component: 1350  -  total flux cleaned = -0.00727762 Jy
! Component: 1400  -  total flux cleaned = -0.00742016 Jy
! Component: 1450  -  total flux cleaned = -0.00762991 Jy
! Component: 1500  -  total flux cleaned = -0.00762996 Jy
! Component: 1550  -  total flux cleaned = -0.00776724 Jy
! Component: 1600  -  total flux cleaned = -0.00793632 Jy
! Component: 1650  -  total flux cleaned = -0.00786948 Jy
! Component: 1700  -  total flux cleaned = -0.00796943 Jy
! Component: 1750  -  total flux cleaned = -0.00810085 Jy
! Component: 1800  -  total flux cleaned = -0.00823102 Jy
! Component: 1850  -  total flux cleaned = -0.00829595 Jy
! Component: 1900  -  total flux cleaned = -0.00848737 Jy
! Component: 1950  -  total flux cleaned = -0.00855061 Jy
! Component: 2000  -  total flux cleaned = -0.00861358 Jy
! Component: 2050  -  total flux cleaned = -0.00870694 Jy
! Component: 2100  -  total flux cleaned = -0.00886109 Jy
! Component: 2150  -  total flux cleaned = -0.00901332 Jy
! Component: 2200  -  total flux cleaned = -0.00907412 Jy
! Component: 2250  -  total flux cleaned = -0.00922426 Jy
! Component: 2300  -  total flux cleaned = -0.00919485 Jy
! Component: 2350  -  total flux cleaned = -0.00934246 Jy
! Component: 2400  -  total flux cleaned = -0.00945987 Jy
! Component: 2450  -  total flux cleaned = -0.00951802 Jy
! Component: 2500  -  total flux cleaned = -0.00960445 Jy
! Component: 2550  -  total flux cleaned = -0.0096907 Jy
! Component: 2600  -  total flux cleaned = -0.00974778 Jy
! Component: 2650  -  total flux cleaned = -0.00980448 Jy
! Component: 2700  -  total flux cleaned = -0.00991639 Jy
! Component: 2750  -  total flux cleaned = -0.00999994 Jy
! Component: 2800  -  total flux cleaned = -0.0100277 Jy
! Component: 2850  -  total flux cleaned = -0.0100825 Jy
! Component: 2900  -  total flux cleaned = -0.010028 Jy
! Component: 2950  -  total flux cleaned = -0.0100823 Jy
! Component: 3000  -  total flux cleaned = -0.0101092 Jy
! Component: 3050  -  total flux cleaned = -0.0101091 Jy
! Component: 3100  -  total flux cleaned = -0.0101625 Jy
! Component: 3150  -  total flux cleaned = -0.0102938 Jy
! Component: 3200  -  total flux cleaned = -0.0102934 Jy
! Component: 3250  -  total flux cleaned = -0.0102673 Jy
! Component: 3300  -  total flux cleaned = -0.0102672 Jy
! Component: 3350  -  total flux cleaned = -0.0102162 Jy
! Component: 3400  -  total flux cleaned = -0.0102416 Jy
! Component: 3450  -  total flux cleaned = -0.0102669 Jy
! Component: 3500  -  total flux cleaned = -0.0102418 Jy
! Component: 3550  -  total flux cleaned = -0.0102169 Jy
! Component: 3600  -  total flux cleaned = -0.0103162 Jy
! Component: 3650  -  total flux cleaned = -0.0103655 Jy
! Component: 3700  -  total flux cleaned = -0.0103168 Jy
! Component: 3750  -  total flux cleaned = -0.0102437 Jy
! Component: 3800  -  total flux cleaned = -0.0104132 Jy
! Component: 3850  -  total flux cleaned = -0.010389 Jy
! Component: 3900  -  total flux cleaned = -0.010389 Jy
! Component: 3950  -  total flux cleaned = -0.0103649 Jy
! Component: 4000  -  total flux cleaned = -0.0103651 Jy
! Component: 4050  -  total flux cleaned = -0.0104357 Jy
! Total flux subtracted in 4096 components = -0.0104357 Jy
! Clean residual min=-0.001217 max=0.001329 Jy/beam
! Clean residual mean=0.000006 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.539904 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 467 components and 0.539904 Jy
![Exited script file: muppet]
wmap "J1316-3338_S_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.477 x 10.65 at 6.493 degrees (North through East)
! Clean map  min=-0.0026378  max=0.3099 Jy/beam
! Writing clean map to FITS file: J1316-3338_S_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.309902 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000461625 
device "J1316-3338_S_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J1316-3338_S_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.446875 0.446875 0.89375 1.7875 3.575 7.15 14.3 28.6 57.2
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.309 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.477 x 10.65 at 6.493 degrees (North through East)
! Clean map  min=-0.0026378  max=0.3099 Jy/beam
quit
! Quitting program
! Log file J1316-3338_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:36:26 2016