! Started logfile: J1152+4939_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:34:07 2016 obs J1152+4939_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1152+4939_S_2014_12_20_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.657605 visibilities/baseline/integration-bin. ! Found source: J1152+4939 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 12192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1152+4939_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888237Jy sigma=0.010499 ! Fit after self-cal, rms=0.877439Jy sigma=0.010375 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=4.17 mas, bpa=-12.32 degrees ! Estimated noise=972.602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0966039 Jy ! Component: 100 - total flux cleaned = 0.11767 Jy ! Total flux subtracted in 100 components = 0.11767 Jy ! Clean residual min=-0.004341 max=0.005888 Jy/beam ! Clean residual mean=-0.000006 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.11767 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.11767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073544Jy sigma=0.000799 ! Fit after self-cal, rms=0.073541Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=4.925 mas, bpa=6.409 degrees ! Estimated noise=552.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606408 Jy ! Component: 100 - total flux cleaned = 0.0089488 Jy ! Component: 150 - total flux cleaned = 0.0106024 Jy ! Component: 200 - total flux cleaned = 0.0116134 Jy ! Total flux subtracted in 200 components = 0.0116134 Jy ! Clean residual min=-0.005015 max=0.003692 Jy/beam ! Clean residual mean=-0.000011 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.129283 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.129283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072928Jy sigma=0.000795 ! Fit after self-cal, rms=0.072928Jy sigma=0.000795 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.88 HN 0.95 KP 1.11 ! LA 0.95 MK 1.00 NL 1.01 OV 1.00 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 1.00 KP 1.06 ! LA 0.93 MK 1.01 NL 1.13 OV 1.00 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 0.98 KP 0.93 ! LA 0.76 MK 1.00 NL 1.20 OV 0.94 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.96 KP 0.87 ! LA 0.80 MK 0.98 NL 1.01 OV 1.02 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.072928Jy sigma=0.000795 ! Fit after self-cal, rms=0.070661Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=4.955 mas, bpa=6.215 degrees ! Estimated noise=553.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371091 Jy ! Component: 100 - total flux cleaned = -0.000431144 Jy ! Component: 150 - total flux cleaned = -0.000470392 Jy ! Component: 200 - total flux cleaned = -0.000494012 Jy ! Total flux subtracted in 200 components = -0.000494012 Jy ! Clean residual min=-0.002351 max=0.001988 Jy/beam ! Clean residual mean=0.000000 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.128789 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.128789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070656Jy sigma=0.000775 ! Fit after self-cal, rms=0.070661Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070661Jy sigma=0.000775 ! Fit after self-cal, rms=0.070311Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=4.949 mas, bpa=5.994 degrees ! Estimated noise=552.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307703 Jy ! Component: 100 - total flux cleaned = -0.000340293 Jy ! Component: 150 - total flux cleaned = -0.000369768 Jy ! Component: 200 - total flux cleaned = -0.000396879 Jy ! Total flux subtracted in 200 components = -0.000396879 Jy ! Clean residual min=-0.001669 max=0.001696 Jy/beam ! Clean residual mean=-0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.128392 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.128392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070308Jy sigma=0.000771 ! Fit after self-cal, rms=0.070320Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (82.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143099 Jy ! Component: 100 - total flux cleaned = 0.00179465 Jy ! Component: 150 - total flux cleaned = 0.00201492 Jy ! Component: 200 - total flux cleaned = 0.0021231 Jy ! Total flux subtracted in 200 components = 0.0021231 Jy ! Clean residual min=-0.001672 max=0.001531 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.130516 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.130516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070286Jy sigma=0.000770 ! Fit after self-cal, rms=0.070282Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070282Jy sigma=0.000770 ! Fit after self-cal, rms=0.070234Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=4.951 mas, bpa=5.852 degrees ! Estimated noise=551.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320718 Jy ! Component: 100 - total flux cleaned = 0.000354267 Jy ! Component: 150 - total flux cleaned = 0.000368871 Jy ! Component: 200 - total flux cleaned = 0.0003825 Jy ! Total flux subtracted in 200 components = 0.0003825 Jy ! Clean residual min=-0.001664 max=0.001544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.130898 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.130898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070227Jy sigma=0.000770 ! Fit after self-cal, rms=0.070228Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.19957e-05 Jy ! Component: 100 - total flux cleaned = 4.44473e-05 Jy ! Component: 150 - total flux cleaned = 4.3827e-05 Jy ! Component: 200 - total flux cleaned = 4.35524e-05 Jy ! Total flux subtracted in 200 components = 4.35524e-05 Jy ! Clean residual min=-0.001658 max=0.001548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.130942 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.130942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070224Jy sigma=0.000770 ! Fit after self-cal, rms=0.070223Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070223Jy sigma=0.000770 ! Fit after self-cal, rms=0.070220Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.199 mas, bmaj=9.557 mas, bpa=18.6 degrees ! Estimated noise=677.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118296 Jy ! Component: 100 - total flux cleaned = 0.000117896 Jy ! Component: 150 - total flux cleaned = 0.000125982 Jy ! Component: 200 - total flux cleaned = 0.000141548 Jy ! Total flux subtracted in 200 components = 0.000141548 Jy ! Clean residual min=-0.001871 max=0.001646 Jy/beam ! Clean residual mean=-0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.131083 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.131083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070219Jy sigma=0.000770 ! Fit after self-cal, rms=0.070220Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90683e-05 Jy ! Component: 100 - total flux cleaned = 6.41287e-05 Jy ! Component: 150 - total flux cleaned = 6.43533e-05 Jy ! Component: 200 - total flux cleaned = 7.08208e-05 Jy ! Total flux subtracted in 200 components = 7.08208e-05 Jy ! Clean residual min=-0.001866 max=0.001639 Jy/beam ! Clean residual mean=-0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.131154 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.131154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070220Jy sigma=0.000770 ! Fit after self-cal, rms=0.070220Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=4.951 mas, bpa=5.809 degrees ! Estimated noise=551.488 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 4.951 at 5.809 degrees (North through East) ! Clean map min=-0.0015828 max=0.12335 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=4.179 mas, bpa=-13.19 degrees ! Estimated noise=971.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0962501 Jy ! Component: 100 - total flux cleaned = 0.117239 Jy ! Component: 150 - total flux cleaned = 0.122158 Jy ! Component: 200 - total flux cleaned = 0.124161 Jy ! Total flux subtracted in 200 components = 0.124161 Jy ! Clean residual min=-0.003008 max=0.002665 Jy/beam ! Clean residual mean=-0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.124161 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.124161 Jy ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=4.951 mas, bpa=5.809 degrees ! Estimated noise=551.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214322 Jy ! Component: 100 - total flux cleaned = 0.00347014 Jy ! Component: 150 - total flux cleaned = 0.00444525 Jy ! Component: 200 - total flux cleaned = 0.00519139 Jy ! Total flux subtracted in 200 components = 0.00519139 Jy ! Clean residual min=-0.001747 max=0.001625 Jy/beam ! Clean residual mean=-0.000004 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.129352 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.129352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.199 mas, bmaj=9.557 mas, bpa=18.6 degrees ! Estimated noise=677.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775481 Jy ! Component: 100 - total flux cleaned = 0.00119608 Jy ! Component: 150 - total flux cleaned = 0.00134375 Jy ! Component: 200 - total flux cleaned = 0.00146696 Jy ! Total flux subtracted in 200 components = 0.00146696 Jy ! Clean residual min=-0.001884 max=0.001572 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.130819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.77183e-05 Jy ! Component: 100 - total flux cleaned = 0.000100399 Jy ! Component: 150 - total flux cleaned = 0.000145706 Jy ! Component: 200 - total flux cleaned = 0.000179125 Jy ! Total flux subtracted in 200 components = 0.000179125 Jy ! Clean residual min=-0.001850 max=0.001594 Jy/beam ! Clean residual mean=-0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.130998 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 71 components and 0.130998 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=4.951 mas, bpa=5.809 degrees ! Estimated noise=551.488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161376 Jy ! Component: 100 - total flux cleaned = -0.000144288 Jy ! Component: 150 - total flux cleaned = -0.0001444 Jy ! Component: 200 - total flux cleaned = -0.000173167 Jy ! Total flux subtracted in 200 components = -0.000173167 Jy ! Clean residual min=-0.001674 max=0.001533 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.130825 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.130825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070224Jy sigma=0.000770 ! Fit after self-cal, rms=0.070223Jy sigma=0.000770 wmodel J1152+4939_S_2014_12_20_pus_map.mod ! Writing 86 model components to file: J1152+4939_S_2014_12_20_pus_map.mod wobs J1152+4939_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1152+4939_S_2014_12_20_pus_uvs.fits wwins J1152+4939_S_2014_12_20_pus_map.win ! wwins: Wrote 2 windows to J1152+4939_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185584 Jy ! Component: 100 - total flux cleaned = -0.00021291 Jy ! Component: 150 - total flux cleaned = -0.000164799 Jy ! Component: 200 - total flux cleaned = -0.000212284 Jy ! Component: 250 - total flux cleaned = -0.000212221 Jy ! Component: 300 - total flux cleaned = -0.000211879 Jy ! Component: 350 - total flux cleaned = -0.00016766 Jy ! Component: 400 - total flux cleaned = -0.000168044 Jy ! Component: 450 - total flux cleaned = -0.000188919 Jy ! Component: 500 - total flux cleaned = -0.000209135 Jy ! Component: 550 - total flux cleaned = -0.000208903 Jy ! Component: 600 - total flux cleaned = -0.000228714 Jy ! Component: 650 - total flux cleaned = -0.00024796 Jy ! Component: 700 - total flux cleaned = -0.000229165 Jy ! Component: 750 - total flux cleaned = -0.000247506 Jy ! Component: 800 - total flux cleaned = -0.000247674 Jy ! Component: 850 - total flux cleaned = -0.000301434 Jy ! Component: 900 - total flux cleaned = -0.000336986 Jy ! Component: 950 - total flux cleaned = -0.000354224 Jy ! Component: 1000 - total flux cleaned = -0.000422691 Jy ! Component: 1050 - total flux cleaned = -0.000439516 Jy ! Component: 1100 - total flux cleaned = -0.000489656 Jy ! Component: 1150 - total flux cleaned = -0.000588025 Jy ! Component: 1200 - total flux cleaned = -0.000652787 Jy ! Component: 1250 - total flux cleaned = -0.000748561 Jy ! Component: 1300 - total flux cleaned = -0.000827246 Jy ! Component: 1350 - total flux cleaned = -0.00090472 Jy ! Component: 1400 - total flux cleaned = -0.000950581 Jy ! Component: 1450 - total flux cleaned = -0.00101129 Jy ! Component: 1500 - total flux cleaned = -0.00107133 Jy ! Component: 1550 - total flux cleaned = -0.0011897 Jy ! Component: 1600 - total flux cleaned = -0.00126291 Jy ! Component: 1650 - total flux cleaned = -0.0013208 Jy ! Component: 1700 - total flux cleaned = -0.00137782 Jy ! Component: 1750 - total flux cleaned = -0.00142041 Jy ! Component: 1800 - total flux cleaned = -0.0015186 Jy ! Component: 1850 - total flux cleaned = -0.00157413 Jy ! Component: 1900 - total flux cleaned = -0.00165632 Jy ! Component: 1950 - total flux cleaned = -0.00173753 Jy ! Component: 2000 - total flux cleaned = -0.00177742 Jy ! Component: 2050 - total flux cleaned = -0.00181726 Jy ! Component: 2100 - total flux cleaned = -0.0019093 Jy ! Component: 2150 - total flux cleaned = -0.00193532 Jy ! Component: 2200 - total flux cleaned = -0.00203857 Jy ! Component: 2250 - total flux cleaned = -0.00203861 Jy ! Component: 2300 - total flux cleaned = -0.00210184 Jy ! Component: 2350 - total flux cleaned = -0.00213949 Jy ! Component: 2400 - total flux cleaned = -0.00216449 Jy ! Component: 2450 - total flux cleaned = -0.00222615 Jy ! Component: 2500 - total flux cleaned = -0.0022628 Jy ! Component: 2550 - total flux cleaned = -0.00228703 Jy ! Component: 2600 - total flux cleaned = -0.00231102 Jy ! Component: 2650 - total flux cleaned = -0.0023825 Jy ! Component: 2700 - total flux cleaned = -0.00239434 Jy ! Component: 2750 - total flux cleaned = -0.0024529 Jy ! Component: 2800 - total flux cleaned = -0.0025109 Jy ! Component: 2850 - total flux cleaned = -0.00255693 Jy ! Component: 2900 - total flux cleaned = -0.00257975 Jy ! Component: 2950 - total flux cleaned = -0.00260249 Jy ! Component: 3000 - total flux cleaned = -0.00267016 Jy ! Component: 3050 - total flux cleaned = -0.00263668 Jy ! Component: 3100 - total flux cleaned = -0.00272563 Jy ! Component: 3150 - total flux cleaned = -0.00273665 Jy ! Component: 3200 - total flux cleaned = -0.00278047 Jy ! Component: 3250 - total flux cleaned = -0.00285665 Jy ! Component: 3300 - total flux cleaned = -0.00285679 Jy ! Component: 3350 - total flux cleaned = -0.0029104 Jy ! Component: 3400 - total flux cleaned = -0.00293179 Jy ! Component: 3450 - total flux cleaned = -0.00298465 Jy ! Component: 3500 - total flux cleaned = -0.0029847 Jy ! Component: 3550 - total flux cleaned = -0.0030369 Jy ! Component: 3600 - total flux cleaned = -0.00304733 Jy ! Component: 3650 - total flux cleaned = -0.00308848 Jy ! Component: 3700 - total flux cleaned = -0.003109 Jy ! Component: 3750 - total flux cleaned = -0.00313953 Jy ! Component: 3800 - total flux cleaned = -0.00319013 Jy ! Component: 3850 - total flux cleaned = -0.0032304 Jy ! Component: 3900 - total flux cleaned = -0.00325044 Jy ! Component: 3950 - total flux cleaned = -0.00332006 Jy ! Component: 4000 - total flux cleaned = -0.00332007 Jy ! Component: 4050 - total flux cleaned = -0.00335939 Jy ! Total flux subtracted in 4096 components = -0.00343759 Jy ! Clean residual min=-0.000618 max=0.000694 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.127387 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 370 components and 0.127387 Jy ![Exited script file: muppet] wmap "J1152+4939_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 4.951 at 5.809 degrees (North through East) ! Clean map min=-0.0010262 max=0.12336 Jy/beam ! Writing clean map to FITS file: J1152+4939_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123359 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170624 device "J1152+4939_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1152+4939_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.414945 0.414945 0.829889 1.65978 3.31956 6.63911 13.2782 26.5565 53.1129 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 4.951 at 5.809 degrees (North through East) ! Clean map min=-0.0010262 max=0.12336 Jy/beam quit ! Quitting program ! Log file J1152+4939_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:34:12 2016