! Started logfile: J0854+2006_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:28:28 2016
obs J0854+2006_S_2014_12_20_pus_uva.fits
! Reading UV FITS file: J0854+2006_S_2014_12_20_pus_uva.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.662222 visibilities/baseline/integration-bin.
! Found source: J0854+2006
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 1788 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0854+2006_S_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.429703Jy  sigma=0.015152
! Fit after  self-cal, rms=1.412905Jy  sigma=0.014956
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.021 mas, bmaj=8.363 mas, bpa=11.34 degrees
! Estimated noise=2288.6 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.79331 Jy
! Component: 100  -  total flux cleaned = 2.20965 Jy
! Total flux subtracted in 100 components = 2.20965 Jy
! Clean residual min=-0.100234 max=0.157565 Jy/beam
! Clean residual mean=-0.001293 rms=0.034366 Jy/beam
! Combined flux in latest and established models = 2.20965 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 2.20965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.444299Jy  sigma=0.004287
! Fit after  self-cal, rms=0.444262Jy  sigma=0.004287
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.597 mas, bmaj=9.323 mas, bpa=13.92 degrees
! Estimated noise=1567.81 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181114 Jy
! Component: 100  -  total flux cleaned = 0.281078 Jy
! Component: 150  -  total flux cleaned = 0.344919 Jy
! Component: 200  -  total flux cleaned = 0.387887 Jy
! Total flux subtracted in 200 components = 0.387887 Jy
! Clean residual min=-0.099335 max=0.074056 Jy/beam
! Clean residual mean=-0.000369 rms=0.022145 Jy/beam
! Combined flux in latest and established models = 2.59754 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 2.59754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.345585Jy  sigma=0.003451
! Fit after  self-cal, rms=0.345486Jy  sigma=0.003450
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.82     HN        0.96     KP        1.11     
!   LA        0.95     MK        1.00*    NL        0.96     OV        0.99     
!   PT        1.06     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        1.07     
!   LA        0.93     MK        1.00*    NL        1.03     OV        1.02     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.13     HN        1.01     KP        0.95     
!   LA        0.75     MK        1.00*    NL        1.35     OV        0.94     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        0.98     KP        0.91     
!   LA        0.81     MK        1.00*    NL        0.99     OV        1.02     
!   PT        1.05     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.345486Jy  sigma=0.003450
! Fit after  self-cal, rms=0.093417Jy  sigma=0.000916
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.662 mas, bmaj=9.372 mas, bpa=13.95 degrees
! Estimated noise=1562.22 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0211377 Jy
! Component: 100  -  total flux cleaned = -0.0281054 Jy
! Component: 150  -  total flux cleaned = -0.0287925 Jy
! Component: 200  -  total flux cleaned = -0.0293328 Jy
! Total flux subtracted in 200 components = -0.0293328 Jy
! Clean residual min=-0.012647 max=0.011797 Jy/beam
! Clean residual mean=-0.000034 rms=0.003594 Jy/beam
! Combined flux in latest and established models = 2.56821 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 2.56821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088229Jy  sigma=0.000870
! Fit after  self-cal, rms=0.088142Jy  sigma=0.000869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088142Jy  sigma=0.000869
! Fit after  self-cal, rms=0.085452Jy  sigma=0.000847
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.668 mas, bmaj=9.394 mas, bpa=14.07 degrees
! Estimated noise=1561.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0125631 Jy
! Component: 100  -  total flux cleaned = -0.0169105 Jy
! Component: 150  -  total flux cleaned = -0.0169114 Jy
! Component: 200  -  total flux cleaned = -0.0172718 Jy
! Total flux subtracted in 200 components = -0.0172718 Jy
! Clean residual min=-0.009875 max=0.009855 Jy/beam
! Clean residual mean=-0.000018 rms=0.002755 Jy/beam
! Combined flux in latest and established models = 2.55093 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 2.55093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083432Jy  sigma=0.000829
! Fit after  self-cal, rms=0.083424Jy  sigma=0.000829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258263 Jy
! Component: 100  -  total flux cleaned = -0.000640686 Jy
! Component: 150  -  total flux cleaned = -0.000990839 Jy
! Component: 200  -  total flux cleaned = -0.0012326 Jy
! Total flux subtracted in 200 components = -0.0012326 Jy
! Clean residual min=-0.009376 max=0.009794 Jy/beam
! Clean residual mean=-0.000021 rms=0.002720 Jy/beam
! Combined flux in latest and established models = 2.5497 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 2.5497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083239Jy  sigma=0.000827
! Fit after  self-cal, rms=0.083237Jy  sigma=0.000827
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083237Jy  sigma=0.000827
! Fit after  self-cal, rms=0.082113Jy  sigma=0.000818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.672 mas, bmaj=9.408 mas, bpa=14.14 degrees
! Estimated noise=1561.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00764409 Jy
! Component: 100  -  total flux cleaned = -0.0106823 Jy
! Component: 150  -  total flux cleaned = -0.0112539 Jy
! Component: 200  -  total flux cleaned = -0.0115853 Jy
! Total flux subtracted in 200 components = -0.0115853 Jy
! Clean residual min=-0.008487 max=0.008727 Jy/beam
! Clean residual mean=-0.000014 rms=0.002299 Jy/beam
! Combined flux in latest and established models = 2.53812 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 2.53812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081330Jy  sigma=0.000811
! Fit after  self-cal, rms=0.081337Jy  sigma=0.000811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000322035 Jy
! Component: 100  -  total flux cleaned = -0.000469512 Jy
! Component: 150  -  total flux cleaned = -0.000470569 Jy
! Component: 200  -  total flux cleaned = -0.000470668 Jy
! Total flux subtracted in 200 components = -0.000470668 Jy
! Clean residual min=-0.008186 max=0.008599 Jy/beam
! Clean residual mean=-0.000016 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 2.53765 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 2.53765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081226Jy  sigma=0.000810
! Fit after  self-cal, rms=0.081229Jy  sigma=0.000810
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081229Jy  sigma=0.000810
! Fit after  self-cal, rms=0.080811Jy  sigma=0.000806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.767 mas, bmaj=10.42 mas, bpa=13.4 degrees
! Estimated noise=1613.45 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00480524 Jy
! Component: 100  -  total flux cleaned = -0.0067042 Jy
! Component: 150  -  total flux cleaned = -0.00710286 Jy
! Component: 200  -  total flux cleaned = -0.00715046 Jy
! Total flux subtracted in 200 components = -0.00715046 Jy
! Clean residual min=-0.006302 max=0.007825 Jy/beam
! Clean residual mean=-0.000014 rms=0.001977 Jy/beam
! Combined flux in latest and established models = 2.5305 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 113 components and 2.5305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080528Jy  sigma=0.000803
! Fit after  self-cal, rms=0.080532Jy  sigma=0.000803
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237405 Jy
! Component: 100  -  total flux cleaned = -0.000103439 Jy
! Component: 150  -  total flux cleaned = -2.21948e-05 Jy
! Component: 200  -  total flux cleaned = 9.26576e-05 Jy
! Total flux subtracted in 200 components = 9.26576e-05 Jy
! Clean residual min=-0.006137 max=0.007737 Jy/beam
! Clean residual mean=-0.000014 rms=0.001962 Jy/beam
! Combined flux in latest and established models = 2.53059 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 119 components and 2.53059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080486Jy  sigma=0.000803
! Fit after  self-cal, rms=0.080490Jy  sigma=0.000803
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.675 mas, bmaj=9.418 mas, bpa=14.18 degrees
! Estimated noise=1561.54 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.675 x 9.418 at 14.18 degrees (North through East)
! Clean map  min=-0.0071057  max=2.3019 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080490Jy  sigma=0.000803
! Fit after  self-cal, rms=0.074381Jy  sigma=0.000736
! Inverting map and beam 
! Estimated beam: bmin=6.675 mas, bmaj=9.426 mas, bpa=14.22 degrees
! Estimated noise=1560.85 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00419485 Jy
! Component: 100  -  total flux cleaned = -0.00601785 Jy
! Component: 150  -  total flux cleaned = -0.0062966 Jy
! Component: 200  -  total flux cleaned = -0.00629749 Jy
! Total flux subtracted in 200 components = -0.00629749 Jy
! Clean residual min=-0.007517 max=0.007428 Jy/beam
! Clean residual mean=-0.000007 rms=0.001929 Jy/beam
! Combined flux in latest and established models = 2.52429 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 122 components and 2.52429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074084Jy  sigma=0.000733
! Fit after  self-cal, rms=0.074086Jy  sigma=0.000733
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.38531e-05 Jy
! Component: 100  -  total flux cleaned = -6.4078e-05 Jy
! Component: 150  -  total flux cleaned = -6.46738e-05 Jy
! Component: 200  -  total flux cleaned = -6.33036e-05 Jy
! Total flux subtracted in 200 components = -6.33036e-05 Jy
! Clean residual min=-0.007348 max=0.007398 Jy/beam
! Clean residual mean=-0.000007 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 2.52423 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 123 components and 2.52423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074011Jy  sigma=0.000732
! Fit after  self-cal, rms=0.074017Jy  sigma=0.000732
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074017Jy  sigma=0.000732
! Fit after  self-cal, rms=0.073870Jy  sigma=0.000731
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.105 mas, bmaj=8.443 mas, bpa=11.07 degrees
! Estimated noise=2277.84 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.78483 Jy
! Component: 100  -  total flux cleaned = 2.18672 Jy
! Component: 150  -  total flux cleaned = 2.3333 Jy
! Component: 200  -  total flux cleaned = 2.40358 Jy
! Total flux subtracted in 200 components = 2.40358 Jy
! Clean residual min=-0.018638 max=0.032787 Jy/beam
! Clean residual mean=-0.000292 rms=0.006743 Jy/beam
! Combined flux in latest and established models = 2.40358 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.40358 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.679 mas, bmaj=9.429 mas, bpa=14.23 degrees
! Estimated noise=1560.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.042405 Jy
! Component: 100  -  total flux cleaned = 0.0669441 Jy
! Component: 150  -  total flux cleaned = 0.0826136 Jy
! Component: 200  -  total flux cleaned = 0.0929006 Jy
! Total flux subtracted in 200 components = 0.0929006 Jy
! Clean residual min=-0.007891 max=0.008994 Jy/beam
! Clean residual mean=-0.000078 rms=0.002261 Jy/beam
! Combined flux in latest and established models = 2.49648 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 60 components and 2.49648 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.772 mas, bmaj=10.44 mas, bpa=13.55 degrees
! Estimated noise=1611.27 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00878304 Jy
! Component: 100  -  total flux cleaned = 0.0140004 Jy
! Component: 150  -  total flux cleaned = 0.0171931 Jy
! Component: 200  -  total flux cleaned = 0.019189 Jy
! Total flux subtracted in 200 components = 0.019189 Jy
! Clean residual min=-0.007176 max=0.006590 Jy/beam
! Clean residual mean=-0.000023 rms=0.001914 Jy/beam
! Combined flux in latest and established models = 2.51567 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000870357 Jy
! Component: 100  -  total flux cleaned = 0.00122124 Jy
! Component: 150  -  total flux cleaned = 0.00145322 Jy
! Component: 200  -  total flux cleaned = 0.00156308 Jy
! Total flux subtracted in 200 components = 0.00156308 Jy
! Clean residual min=-0.007059 max=0.006555 Jy/beam
! Clean residual mean=-0.000016 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 2.51723 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 97 components and 2.51723 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.679 mas, bmaj=9.429 mas, bpa=14.23 degrees
! Estimated noise=1560.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144298 Jy
! Component: 100  -  total flux cleaned = 0.000146364 Jy
! Component: 150  -  total flux cleaned = 0.000190421 Jy
! Component: 200  -  total flux cleaned = 0.00019019 Jy
! Total flux subtracted in 200 components = 0.00019019 Jy
! Clean residual min=-0.007431 max=0.006395 Jy/beam
! Clean residual mean=-0.000010 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 2.51742 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 111 components and 2.51742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073808Jy  sigma=0.000730
! Fit after  self-cal, rms=0.073813Jy  sigma=0.000730
wmodel J0854+2006_S_2014_12_20_pus_map.mod
! Writing 111 model components to file: J0854+2006_S_2014_12_20_pus_map.mod
wobs J0854+2006_S_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J0854+2006_S_2014_12_20_pus_uvs.fits
wwins J0854+2006_S_2014_12_20_pus_map.win
! wwins: Wrote 1 windows to J0854+2006_S_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000763956 Jy
! Component: 100  -  total flux cleaned = 0.000754403 Jy
! Component: 150  -  total flux cleaned = 0.00234185 Jy
! Component: 200  -  total flux cleaned = 0.00391254 Jy
! Component: 250  -  total flux cleaned = 0.00487317 Jy
! Component: 300  -  total flux cleaned = 0.00602583 Jy
! Component: 350  -  total flux cleaned = 0.00688229 Jy
! Component: 400  -  total flux cleaned = 0.00785158 Jy
! Component: 450  -  total flux cleaned = 0.00863812 Jy
! Component: 500  -  total flux cleaned = 0.00932686 Jy
! Component: 550  -  total flux cleaned = 0.00985612 Jy
! Component: 600  -  total flux cleaned = 0.0102388 Jy
! Component: 650  -  total flux cleaned = 0.0104236 Jy
! Component: 700  -  total flux cleaned = 0.010543 Jy
! Component: 750  -  total flux cleaned = 0.0107161 Jy
! Component: 800  -  total flux cleaned = 0.0109376 Jy
! Component: 850  -  total flux cleaned = 0.0111521 Jy
! Component: 900  -  total flux cleaned = 0.0112559 Jy
! Component: 950  -  total flux cleaned = 0.0117091 Jy
! Component: 1000  -  total flux cleaned = 0.0119538 Jy
! Component: 1050  -  total flux cleaned = 0.0120973 Jy
! Component: 1100  -  total flux cleaned = 0.0122381 Jy
! Component: 1150  -  total flux cleaned = 0.0124652 Jy
! Component: 1200  -  total flux cleaned = 0.0125974 Jy
! Component: 1250  -  total flux cleaned = 0.0127265 Jy
! Component: 1300  -  total flux cleaned = 0.0128933 Jy
! Component: 1350  -  total flux cleaned = 0.0129747 Jy
! Component: 1400  -  total flux cleaned = 0.0130531 Jy
! Component: 1450  -  total flux cleaned = 0.0132068 Jy
! Component: 1500  -  total flux cleaned = 0.013281 Jy
! Component: 1550  -  total flux cleaned = 0.0131698 Jy
! Component: 1600  -  total flux cleaned = 0.0131693 Jy
! Component: 1650  -  total flux cleaned = 0.0130977 Jy
! Component: 1700  -  total flux cleaned = 0.0129925 Jy
! Component: 1750  -  total flux cleaned = 0.0128903 Jy
! Component: 1800  -  total flux cleaned = 0.0128229 Jy
! Component: 1850  -  total flux cleaned = 0.0127894 Jy
! Component: 1900  -  total flux cleaned = 0.012789 Jy
! Component: 1950  -  total flux cleaned = 0.0127564 Jy
! Component: 2000  -  total flux cleaned = 0.0127878 Jy
! Component: 2050  -  total flux cleaned = 0.0128193 Jy
! Component: 2100  -  total flux cleaned = 0.0127572 Jy
! Component: 2150  -  total flux cleaned = 0.0128186 Jy
! Component: 2200  -  total flux cleaned = 0.012879 Jy
! Component: 2250  -  total flux cleaned = 0.0129088 Jy
! Component: 2300  -  total flux cleaned = 0.0129681 Jy
! Component: 2350  -  total flux cleaned = 0.0129389 Jy
! Component: 2400  -  total flux cleaned = 0.0129678 Jy
! Component: 2450  -  total flux cleaned = 0.0130533 Jy
! Component: 2500  -  total flux cleaned = 0.013025 Jy
! Component: 2550  -  total flux cleaned = 0.0130249 Jy
! Component: 2600  -  total flux cleaned = 0.0130523 Jy
! Component: 2650  -  total flux cleaned = 0.0130251 Jy
! Component: 2700  -  total flux cleaned = 0.0130524 Jy
! Component: 2750  -  total flux cleaned = 0.0131065 Jy
! Component: 2800  -  total flux cleaned = 0.0131864 Jy
! Component: 2850  -  total flux cleaned = 0.0132127 Jy
! Component: 2900  -  total flux cleaned = 0.0132389 Jy
! Component: 2950  -  total flux cleaned = 0.0131869 Jy
! Component: 3000  -  total flux cleaned = 0.0132387 Jy
! Component: 3050  -  total flux cleaned = 0.0133158 Jy
! Component: 3100  -  total flux cleaned = 0.0133667 Jy
! Component: 3150  -  total flux cleaned = 0.0133922 Jy
! Component: 3200  -  total flux cleaned = 0.0133416 Jy
! Component: 3250  -  total flux cleaned = 0.0133921 Jy
! Component: 3300  -  total flux cleaned = 0.0133419 Jy
! Component: 3350  -  total flux cleaned = 0.0132919 Jy
! Component: 3400  -  total flux cleaned = 0.0132669 Jy
! Component: 3450  -  total flux cleaned = 0.0132169 Jy
! Component: 3500  -  total flux cleaned = 0.0131672 Jy
! Component: 3550  -  total flux cleaned = 0.0130928 Jy
! Component: 3600  -  total flux cleaned = 0.0130434 Jy
! Component: 3650  -  total flux cleaned = 0.0130434 Jy
! Component: 3700  -  total flux cleaned = 0.012945 Jy
! Component: 3750  -  total flux cleaned = 0.012896 Jy
! Component: 3800  -  total flux cleaned = 0.0128225 Jy
! Component: 3850  -  total flux cleaned = 0.0127737 Jy
! Component: 3900  -  total flux cleaned = 0.0127252 Jy
! Component: 3950  -  total flux cleaned = 0.0126766 Jy
! Component: 4000  -  total flux cleaned = 0.0126524 Jy
! Component: 4050  -  total flux cleaned = 0.0125556 Jy
! Total flux subtracted in 4096 components = 0.0125555 Jy
! Clean residual min=-0.001330 max=0.001373 Jy/beam
! Clean residual mean=-0.000013 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 2.52998 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 417 components and 2.52998 Jy
![Exited script file: muppet]
wmap "J0854+2006_S_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.679 x 9.429 at 14.23 degrees (North through East)
! Clean map  min=-0.0044348  max=2.3035 Jy/beam
! Writing clean map to FITS file: J0854+2006_S_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.3035 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000425127 
device "J0854+2006_S_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J0854+2006_S_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.055367 0.055367 0.110734 0.221468 0.442936 0.885872 1.77174 3.54349 7.08697 14.1739 28.3479 56.6958
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 2.303 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.679 x 9.429 at 14.23 degrees (North through East)
! Clean map  min=-0.0044348  max=2.3035 Jy/beam
quit
! Quitting program
! Log file J0854+2006_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:28:34 2016