! Started logfile: J0805+6144_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:27:24 2016 obs J0805+6144_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2014_12_20_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.680952 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 1716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.264169Jy sigma=0.002260 ! Fit after self-cal, rms=0.250331Jy sigma=0.002144 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=18.76 mas, bpa=-57.67 degrees ! Estimated noise=2445.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.619642 Jy ! Component: 100 - total flux cleaned = 0.774261 Jy ! Total flux subtracted in 100 components = 0.774261 Jy ! Clean residual min=-0.030694 max=0.067200 Jy/beam ! Clean residual mean=0.000041 rms=0.011378 Jy/beam ! Combined flux in latest and established models = 0.774261 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.774261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182162Jy sigma=0.001386 ! Fit after self-cal, rms=0.182161Jy sigma=0.001386 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=18.87 mas, bpa=-57.45 degrees ! Estimated noise=1998.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121.5, 75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773383 Jy ! Component: 100 - total flux cleaned = 0.114127 Jy ! Component: 150 - total flux cleaned = 0.13608 Jy ! Component: 200 - total flux cleaned = 0.150446 Jy ! Total flux subtracted in 200 components = 0.150446 Jy ! Clean residual min=-0.030873 max=0.021593 Jy/beam ! Clean residual mean=-0.000104 rms=0.007270 Jy/beam ! Combined flux in latest and established models = 0.924707 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 82 components and 0.924707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141483Jy sigma=0.001108 ! Fit after self-cal, rms=0.141214Jy sigma=0.001105 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 0.97 KP 1.11 ! LA 0.93 MK 1.00* NL 0.96 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 HN 1.04 KP 1.06 ! LA 0.93 MK 1.00* NL 0.99 OV 1.02 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.21 HN 1.02 KP 0.97 ! LA 0.74 MK 1.00* NL 1.09 OV 0.94 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.98 KP 0.92 ! LA 0.81 MK 1.00* NL 1.02 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.141214Jy sigma=0.001105 ! Fit after self-cal, rms=0.091542Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=19.01 mas, bpa=-57.49 degrees ! Estimated noise=1990.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00345605 Jy ! Component: 100 - total flux cleaned = -0.00431796 Jy ! Component: 150 - total flux cleaned = -0.00495714 Jy ! Component: 200 - total flux cleaned = -0.00515416 Jy ! Total flux subtracted in 200 components = -0.00515416 Jy ! Clean residual min=-0.005314 max=0.006066 Jy/beam ! Clean residual mean=0.000003 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.919553 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 112 components and 0.919553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091231Jy sigma=0.000766 ! Fit after self-cal, rms=0.091205Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091205Jy sigma=0.000765 ! Fit after self-cal, rms=0.091185Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=19.02 mas, bpa=-57.5 degrees ! Estimated noise=1989.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171934 Jy ! Component: 100 - total flux cleaned = -0.00216792 Jy ! Component: 150 - total flux cleaned = -0.00216833 Jy ! Component: 200 - total flux cleaned = -0.00224254 Jy ! Total flux subtracted in 200 components = -0.00224254 Jy ! Clean residual min=-0.004883 max=0.005805 Jy/beam ! Clean residual mean=0.000006 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.91731 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 135 components and 0.917311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091035Jy sigma=0.000764 ! Fit after self-cal, rms=0.091028Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242093 Jy ! Component: 100 - total flux cleaned = -0.000175937 Jy ! Component: 150 - total flux cleaned = -0.000112598 Jy ! Component: 200 - total flux cleaned = -5.27663e-05 Jy ! Total flux subtracted in 200 components = -5.27663e-05 Jy ! Clean residual min=-0.004594 max=0.005627 Jy/beam ! Clean residual mean=0.000007 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.917258 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 0.917258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090946Jy sigma=0.000763 ! Fit after self-cal, rms=0.090943Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090943Jy sigma=0.000763 ! Fit after self-cal, rms=0.090937Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=19.03 mas, bpa=-57.51 degrees ! Estimated noise=1989.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849884 Jy ! Component: 100 - total flux cleaned = -0.00108586 Jy ! Component: 150 - total flux cleaned = -0.000975146 Jy ! Component: 200 - total flux cleaned = -0.000975543 Jy ! Total flux subtracted in 200 components = -0.000975543 Jy ! Clean residual min=-0.004437 max=0.005413 Jy/beam ! Clean residual mean=0.000006 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.916282 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 168 components and 0.916282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090869Jy sigma=0.000763 ! Fit after self-cal, rms=0.090866Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151793 Jy ! Component: 100 - total flux cleaned = -0.000199335 Jy ! Component: 150 - total flux cleaned = -0.000154159 Jy ! Component: 200 - total flux cleaned = -6.87697e-05 Jy ! Total flux subtracted in 200 components = -6.87697e-05 Jy ! Clean residual min=-0.004450 max=0.005296 Jy/beam ! Clean residual mean=0.000007 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.916213 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 182 components and 0.916213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090824Jy sigma=0.000762 ! Fit after self-cal, rms=0.090822Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090822Jy sigma=0.000762 ! Fit after self-cal, rms=0.090824Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.498 mas, bmaj=20.04 mas, bpa=-52.82 degrees ! Estimated noise=2317.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629519 Jy ! Component: 100 - total flux cleaned = -0.000583632 Jy ! Component: 150 - total flux cleaned = -0.000624157 Jy ! Component: 200 - total flux cleaned = -0.000550011 Jy ! Total flux subtracted in 200 components = -0.000550011 Jy ! Clean residual min=-0.004320 max=0.005672 Jy/beam ! Clean residual mean=0.000007 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.915663 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 203 components and 0.915664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090794Jy sigma=0.000762 ! Fit after self-cal, rms=0.090791Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125208 Jy ! Component: 100 - total flux cleaned = -9.16808e-05 Jy ! Component: 150 - total flux cleaned = -9.20613e-05 Jy ! Component: 200 - total flux cleaned = -9.21941e-05 Jy ! Total flux subtracted in 200 components = -9.21941e-05 Jy ! Clean residual min=-0.004279 max=0.005502 Jy/beam ! Clean residual mean=0.000007 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.915571 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 216 components and 0.915571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090773Jy sigma=0.000762 ! Fit after self-cal, rms=0.090771Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=19.03 mas, bpa=-57.51 degrees ! Estimated noise=1989.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.86 x 19.03 at -57.51 degrees (North through East) ! Clean map min=-0.0041935 max=0.79929 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090771Jy sigma=0.000762 ! Fit after self-cal, rms=0.084463Jy sigma=0.000705 ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=19.03 mas, bpa=-57.51 degrees ! Estimated noise=1989.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215845 Jy ! Component: 100 - total flux cleaned = -0.000552173 Jy ! Component: 150 - total flux cleaned = -0.000848376 Jy ! Component: 200 - total flux cleaned = -0.000998001 Jy ! Total flux subtracted in 200 components = -0.000998001 Jy ! Clean residual min=-0.004204 max=0.004910 Jy/beam ! Clean residual mean=0.000003 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.914573 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 235 components and 0.914573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084416Jy sigma=0.000705 ! Fit after self-cal, rms=0.084412Jy sigma=0.000705 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.56534e-05 Jy ! Component: 100 - total flux cleaned = -0.000152758 Jy ! Component: 150 - total flux cleaned = -0.000183136 Jy ! Component: 200 - total flux cleaned = -0.000182736 Jy ! Total flux subtracted in 200 components = -0.000182736 Jy ! Clean residual min=-0.004196 max=0.004826 Jy/beam ! Clean residual mean=0.000003 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.914391 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 256 components and 0.914391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084391Jy sigma=0.000704 ! Fit after self-cal, rms=0.084389Jy sigma=0.000704 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084389Jy sigma=0.000704 ! Fit after self-cal, rms=0.084409Jy sigma=0.000704 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=18.92 mas, bpa=-57.73 degrees ! Estimated noise=2450.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.620981 Jy ! Component: 100 - total flux cleaned = 0.771045 Jy ! Component: 150 - total flux cleaned = 0.833834 Jy ! Component: 200 - total flux cleaned = 0.862553 Jy ! Total flux subtracted in 200 components = 0.862553 Jy ! Clean residual min=-0.009472 max=0.014471 Jy/beam ! Clean residual mean=0.000043 rms=0.003294 Jy/beam ! Combined flux in latest and established models = 0.862554 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.862554 Jy ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=19.04 mas, bpa=-57.51 degrees ! Estimated noise=1989.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (116, -73.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205742 Jy ! Component: 100 - total flux cleaned = 0.0325012 Jy ! Component: 150 - total flux cleaned = 0.03939 Jy ! Component: 200 - total flux cleaned = 0.0424288 Jy ! Total flux subtracted in 200 components = 0.0424288 Jy ! Clean residual min=-0.005079 max=0.005270 Jy/beam ! Clean residual mean=0.000016 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.904982 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 104 components and 0.904982 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.501 mas, bmaj=20.05 mas, bpa=-52.82 degrees ! Estimated noise=2315.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419105 Jy ! Component: 100 - total flux cleaned = 0.00573114 Jy ! Component: 150 - total flux cleaned = 0.00694151 Jy ! Component: 200 - total flux cleaned = 0.00772201 Jy ! Total flux subtracted in 200 components = 0.00772201 Jy ! Clean residual min=-0.003893 max=0.005102 Jy/beam ! Clean residual mean=0.000005 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.912704 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031317 Jy ! Component: 100 - total flux cleaned = 0.000527778 Jy ! Component: 150 - total flux cleaned = 0.000657129 Jy ! Component: 200 - total flux cleaned = 0.000779143 Jy ! Total flux subtracted in 200 components = 0.000779143 Jy ! Clean residual min=-0.003775 max=0.004966 Jy/beam ! Clean residual mean=-0.000001 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.913483 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 170 components and 0.913483 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=19.04 mas, bpa=-57.51 degrees ! Estimated noise=1989.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482688 Jy ! Component: 100 - total flux cleaned = -0.000486456 Jy ! Component: 150 - total flux cleaned = -0.000327903 Jy ! Component: 200 - total flux cleaned = -0.000254837 Jy ! Total flux subtracted in 200 components = -0.000254837 Jy ! Clean residual min=-0.004345 max=0.004466 Jy/beam ! Clean residual mean=-0.000003 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.913228 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 188 components and 0.913228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084433Jy sigma=0.000704 ! Fit after self-cal, rms=0.084404Jy sigma=0.000704 wmodel J0805+6144_S_2014_12_20_pus_map.mod ! Writing 188 model components to file: J0805+6144_S_2014_12_20_pus_map.mod wobs J0805+6144_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2014_12_20_pus_uvs.fits wwins J0805+6144_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J0805+6144_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122581 Jy ! Component: 100 - total flux cleaned = 0.00210904 Jy ! Component: 150 - total flux cleaned = 0.0023853 Jy ! Component: 200 - total flux cleaned = 0.00225467 Jy ! Component: 250 - total flux cleaned = 0.00206673 Jy ! Component: 300 - total flux cleaned = 0.00194521 Jy ! Component: 350 - total flux cleaned = 0.00177073 Jy ! Component: 400 - total flux cleaned = 0.00154594 Jy ! Component: 450 - total flux cleaned = 0.00132862 Jy ! Component: 500 - total flux cleaned = 0.00101358 Jy ! Component: 550 - total flux cleaned = 0.000809488 Jy ! Component: 600 - total flux cleaned = 0.000709184 Jy ! Component: 650 - total flux cleaned = 0.000709513 Jy ! Component: 700 - total flux cleaned = 0.000661366 Jy ! Component: 750 - total flux cleaned = 0.000660789 Jy ! Component: 800 - total flux cleaned = 0.000753396 Jy ! Component: 850 - total flux cleaned = 0.000752959 Jy ! Component: 900 - total flux cleaned = 0.000753176 Jy ! Component: 950 - total flux cleaned = 0.000841219 Jy ! Component: 1000 - total flux cleaned = 0.000841207 Jy ! Component: 1050 - total flux cleaned = 0.00088398 Jy ! Component: 1100 - total flux cleaned = 0.000842462 Jy ! Component: 1150 - total flux cleaned = 0.000842822 Jy ! Component: 1200 - total flux cleaned = 0.000883854 Jy ! Component: 1250 - total flux cleaned = 0.000844093 Jy ! Component: 1300 - total flux cleaned = 0.000765635 Jy ! Component: 1350 - total flux cleaned = 0.000804224 Jy ! Component: 1400 - total flux cleaned = 0.000727771 Jy ! Component: 1450 - total flux cleaned = 0.000652871 Jy ! Component: 1500 - total flux cleaned = 0.000652709 Jy ! Component: 1550 - total flux cleaned = 0.000579605 Jy ! Component: 1600 - total flux cleaned = 0.000687291 Jy ! Component: 1650 - total flux cleaned = 0.000580579 Jy ! Component: 1700 - total flux cleaned = 0.000615493 Jy ! Component: 1750 - total flux cleaned = 0.00058068 Jy ! Component: 1800 - total flux cleaned = 0.000649209 Jy ! Component: 1850 - total flux cleaned = 0.000682788 Jy ! Component: 1900 - total flux cleaned = 0.000682809 Jy ! Component: 1950 - total flux cleaned = 0.000716024 Jy ! Component: 2000 - total flux cleaned = 0.000813571 Jy ! Component: 2050 - total flux cleaned = 0.000877804 Jy ! Component: 2100 - total flux cleaned = 0.000941109 Jy ! Component: 2150 - total flux cleaned = 0.000972405 Jy ! Component: 2200 - total flux cleaned = 0.00106574 Jy ! Component: 2250 - total flux cleaned = 0.00106587 Jy ! Component: 2300 - total flux cleaned = 0.00109618 Jy ! Component: 2350 - total flux cleaned = 0.00115646 Jy ! Component: 2400 - total flux cleaned = 0.00118631 Jy ! Component: 2450 - total flux cleaned = 0.00121597 Jy ! Component: 2500 - total flux cleaned = 0.00127481 Jy ! Component: 2550 - total flux cleaned = 0.00127476 Jy ! Component: 2600 - total flux cleaned = 0.00124623 Jy ! Component: 2650 - total flux cleaned = 0.00127458 Jy ! Component: 2700 - total flux cleaned = 0.001303 Jy ! Component: 2750 - total flux cleaned = 0.00133089 Jy ! Component: 2800 - total flux cleaned = 0.00127502 Jy ! Component: 2850 - total flux cleaned = 0.00133075 Jy ! Component: 2900 - total flux cleaned = 0.0014407 Jy ! Component: 2950 - total flux cleaned = 0.0014953 Jy ! Component: 3000 - total flux cleaned = 0.00149519 Jy ! Component: 3050 - total flux cleaned = 0.00144144 Jy ! Component: 3100 - total flux cleaned = 0.00152155 Jy ! Component: 3150 - total flux cleaned = 0.00146836 Jy ! Component: 3200 - total flux cleaned = 0.00144217 Jy ! Component: 3250 - total flux cleaned = 0.00141601 Jy ! Component: 3300 - total flux cleaned = 0.00136392 Jy ! Component: 3350 - total flux cleaned = 0.00131233 Jy ! Component: 3400 - total flux cleaned = 0.00133796 Jy ! Component: 3450 - total flux cleaned = 0.00138917 Jy ! Component: 3500 - total flux cleaned = 0.00141444 Jy ! Component: 3550 - total flux cleaned = 0.00141422 Jy ! Component: 3600 - total flux cleaned = 0.00141396 Jy ! Component: 3650 - total flux cleaned = 0.001414 Jy ! Component: 3700 - total flux cleaned = 0.00138909 Jy ! Component: 3750 - total flux cleaned = 0.00136441 Jy ! Component: 3800 - total flux cleaned = 0.00143843 Jy ! Component: 3850 - total flux cleaned = 0.00138923 Jy ! Component: 3900 - total flux cleaned = 0.00146249 Jy ! Component: 3950 - total flux cleaned = 0.00136513 Jy ! Component: 4000 - total flux cleaned = 0.00138945 Jy ! Component: 4050 - total flux cleaned = 0.00134112 Jy ! Total flux subtracted in 4096 components = 0.00131699 Jy ! Clean residual min=-0.001526 max=0.001439 Jy/beam ! Clean residual mean=-0.000014 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.914545 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 469 components and 0.914545 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.865 x 19.04 at -57.51 degrees (North through East) ! Clean map min=-0.0034716 max=0.79841 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.798411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000446392 device "J0805+6144_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0805+6144_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.16773 0.16773 0.33546 0.67092 1.34184 2.68368 5.36736 10.7347 21.4694 42.9389 85.8778 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.798 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.865 x 19.04 at -57.51 degrees (North through East) ! Clean map min=-0.0034716 max=0.79841 Jy/beam quit ! Quitting program ! Log file J0805+6144_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:27:33 2016