! Started logfile: J0501-1355_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:21:28 2016 obs J0501-1355_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0501-1355_S_2014_12_20_pus_uva.fits ! AN table 1: 105 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788148 visibilities/baseline/integration-bin. ! Found source: J0501-1355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 14896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0501-1355_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938817Jy sigma=0.009815 ! Fit after self-cal, rms=0.915786Jy sigma=0.009584 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.125 mas, bpa=2.876 degrees ! Estimated noise=853.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0639317 Jy ! Component: 100 - total flux cleaned = 0.0829836 Jy ! Total flux subtracted in 100 components = 0.0829836 Jy ! Clean residual min=-0.003626 max=0.007692 Jy/beam ! Clean residual mean=-0.000022 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.0829836 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0829836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081774Jy sigma=0.000801 ! Fit after self-cal, rms=0.081682Jy sigma=0.000800 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00902935 Jy ! Component: 100 - total flux cleaned = 0.0139246 Jy ! Total flux subtracted in 100 components = 0.0139246 Jy ! Clean residual min=-0.003226 max=0.004169 Jy/beam ! Clean residual mean=-0.000012 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0969082 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.0969082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080316Jy sigma=0.000787 ! Fit after self-cal, rms=0.080293Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.464 mas, bpa=2.343 degrees ! Estimated noise=562.215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049506 Jy ! Component: 100 - total flux cleaned = 0.00779797 Jy ! Component: 150 - total flux cleaned = 0.00960852 Jy ! Component: 200 - total flux cleaned = 0.0107987 Jy ! Total flux subtracted in 200 components = 0.0107987 Jy ! Clean residual min=-0.002984 max=0.002640 Jy/beam ! Clean residual mean=-0.000002 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.107707 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 56 components and 0.107707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079919Jy sigma=0.000784 ! Fit after self-cal, rms=0.079897Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.89 HN 0.98 KP 1.12 ! LA 0.96 MK 0.97 NL 0.95 OV 0.98 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 1.10 KP 1.03 ! LA 0.94 MK 1.12 NL 1.06 OV 0.99 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.11 HN 1.04 KP 0.98 ! LA 0.76 MK 0.96 NL 1.22 OV 1.02 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.00 KP 0.91 ! LA 0.83 MK 0.93 NL 0.98 OV 1.02 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.079897Jy sigma=0.000784 ! Fit after self-cal, rms=0.077575Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.481 mas, bpa=2.348 degrees ! Estimated noise=562.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041227 Jy ! Component: 100 - total flux cleaned = -0.000762132 Jy ! Component: 150 - total flux cleaned = -0.000998631 Jy ! Component: 200 - total flux cleaned = -0.0011814 Jy ! Total flux subtracted in 200 components = -0.0011814 Jy ! Clean residual min=-0.001891 max=0.001887 Jy/beam ! Clean residual mean=-0.000003 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.106526 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.106526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077548Jy sigma=0.000777 ! Fit after self-cal, rms=0.077518Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077518Jy sigma=0.000776 ! Fit after self-cal, rms=0.077491Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.474 mas, bpa=2.271 degrees ! Estimated noise=561.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0291e-05 Jy ! Component: 100 - total flux cleaned = -0.000270358 Jy ! Component: 150 - total flux cleaned = -0.000469642 Jy ! Component: 200 - total flux cleaned = -0.000608358 Jy ! Total flux subtracted in 200 components = -0.000608358 Jy ! Clean residual min=-0.001847 max=0.001634 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.105917 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.105917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077476Jy sigma=0.000775 ! Fit after self-cal, rms=0.077485Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90296e-05 Jy ! Component: 100 - total flux cleaned = -0.000113831 Jy ! Component: 150 - total flux cleaned = -0.000184232 Jy ! Component: 200 - total flux cleaned = -0.000233683 Jy ! Total flux subtracted in 200 components = -0.000233683 Jy ! Clean residual min=-0.001836 max=0.001628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.105683 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.105683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077476Jy sigma=0.000775 ! Fit after self-cal, rms=0.077474Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077474Jy sigma=0.000775 ! Fit after self-cal, rms=0.077424Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=8.462 mas, bpa=2.143 degrees ! Estimated noise=560.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.80056e-06 Jy ! Component: 100 - total flux cleaned = -0.00016106 Jy ! Component: 150 - total flux cleaned = -0.0002741 Jy ! Component: 200 - total flux cleaned = -0.000333617 Jy ! Total flux subtracted in 200 components = -0.000333617 Jy ! Clean residual min=-0.001811 max=0.001636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.10535 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.10535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077416Jy sigma=0.000775 ! Fit after self-cal, rms=0.077417Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43058e-05 Jy ! Component: 100 - total flux cleaned = -8.34532e-05 Jy ! Component: 150 - total flux cleaned = -0.000138525 Jy ! Component: 200 - total flux cleaned = -0.00019038 Jy ! Total flux subtracted in 200 components = -0.00019038 Jy ! Clean residual min=-0.001806 max=0.001633 Jy/beam ! Clean residual mean=-0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.105159 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.105159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077412Jy sigma=0.000775 ! Fit after self-cal, rms=0.077410Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077410Jy sigma=0.000775 ! Fit after self-cal, rms=0.077354Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.339 mas, bmaj=14.54 mas, bpa=3.054 degrees ! Estimated noise=700.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401968 Jy ! Component: 100 - total flux cleaned = -0.000413952 Jy ! Component: 150 - total flux cleaned = -0.000428263 Jy ! Component: 200 - total flux cleaned = -0.00044723 Jy ! Total flux subtracted in 200 components = -0.00044723 Jy ! Clean residual min=-0.002369 max=0.001819 Jy/beam ! Clean residual mean=-0.000003 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.104712 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.104712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077352Jy sigma=0.000775 ! Fit after self-cal, rms=0.077353Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83655e-05 Jy ! Component: 100 - total flux cleaned = -6.98518e-05 Jy ! Component: 150 - total flux cleaned = -6.99807e-05 Jy ! Component: 200 - total flux cleaned = -6.99102e-05 Jy ! Total flux subtracted in 200 components = -6.99102e-05 Jy ! Clean residual min=-0.002359 max=0.001798 Jy/beam ! Clean residual mean=-0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.104642 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 117 components and 0.104642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077352Jy sigma=0.000775 ! Fit after self-cal, rms=0.077352Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.454 mas, bpa=2.058 degrees ! Estimated noise=560.036 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.454 at 2.058 degrees (North through East) ! Clean map min=-0.0017233 max=0.082745 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=7.104 mas, bpa=2.613 degrees ! Estimated noise=841.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632214 Jy ! Component: 100 - total flux cleaned = 0.0837672 Jy ! Component: 150 - total flux cleaned = 0.092837 Jy ! Component: 200 - total flux cleaned = 0.097839 Jy ! Total flux subtracted in 200 components = 0.097839 Jy ! Clean residual min=-0.002903 max=0.003202 Jy/beam ! Clean residual mean=-0.000005 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.097839 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.097839 Jy ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.454 mas, bpa=2.058 degrees ! Estimated noise=560.036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039801 Jy ! Component: 100 - total flux cleaned = 0.00617119 Jy ! Component: 150 - total flux cleaned = 0.00683517 Jy ! Component: 200 - total flux cleaned = 0.00687879 Jy ! Total flux subtracted in 200 components = 0.00687879 Jy ! Clean residual min=-0.001889 max=0.001559 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.104718 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.104718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.339 mas, bmaj=14.54 mas, bpa=3.054 degrees ! Estimated noise=700.448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670545 Jy ! Component: 100 - total flux cleaned = 0.000564236 Jy ! Component: 150 - total flux cleaned = 0.000434012 Jy ! Component: 200 - total flux cleaned = 0.000342418 Jy ! Total flux subtracted in 200 components = 0.000342418 Jy ! Clean residual min=-0.002392 max=0.001759 Jy/beam ! Clean residual mean=-0.000002 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.10506 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.82376e-05 Jy ! Component: 100 - total flux cleaned = -0.000145104 Jy ! Component: 150 - total flux cleaned = -0.000191813 Jy ! Component: 200 - total flux cleaned = -0.000242275 Jy ! Total flux subtracted in 200 components = -0.000242275 Jy ! Clean residual min=-0.002371 max=0.001782 Jy/beam ! Clean residual mean=-0.000003 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.104818 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.104818 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.454 mas, bpa=2.058 degrees ! Estimated noise=560.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40699e-05 Jy ! Component: 100 - total flux cleaned = -8.38617e-05 Jy ! Component: 150 - total flux cleaned = -0.00016826 Jy ! Component: 200 - total flux cleaned = -0.000205372 Jy ! Total flux subtracted in 200 components = -0.000205372 Jy ! Clean residual min=-0.001834 max=0.001585 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.104613 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.104613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077357Jy sigma=0.000775 ! Fit after self-cal, rms=0.077352Jy sigma=0.000775 wmodel J0501-1355_S_2014_12_20_pus_map.mod ! Writing 85 model components to file: J0501-1355_S_2014_12_20_pus_map.mod wobs J0501-1355_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0501-1355_S_2014_12_20_pus_uvs.fits wwins J0501-1355_S_2014_12_20_pus_map.win ! wwins: Wrote 2 windows to J0501-1355_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268819 Jy ! Component: 100 - total flux cleaned = -0.000297258 Jy ! Component: 150 - total flux cleaned = -0.000271135 Jy ! Component: 200 - total flux cleaned = -0.000320988 Jy ! Component: 250 - total flux cleaned = -0.000392189 Jy ! Component: 300 - total flux cleaned = -0.000460056 Jy ! Component: 350 - total flux cleaned = -0.000525759 Jy ! Component: 400 - total flux cleaned = -0.000654456 Jy ! Component: 450 - total flux cleaned = -0.000800948 Jy ! Component: 500 - total flux cleaned = -0.000902927 Jy ! Component: 550 - total flux cleaned = -0.000942989 Jy ! Component: 600 - total flux cleaned = -0.000982124 Jy ! Component: 650 - total flux cleaned = -0.00105904 Jy ! Component: 700 - total flux cleaned = -0.00107802 Jy ! Component: 750 - total flux cleaned = -0.00109665 Jy ! Component: 800 - total flux cleaned = -0.00111496 Jy ! Component: 850 - total flux cleaned = -0.00111539 Jy ! Component: 900 - total flux cleaned = -0.00116797 Jy ! Component: 950 - total flux cleaned = -0.0011852 Jy ! Component: 1000 - total flux cleaned = -0.0012022 Jy ! Component: 1050 - total flux cleaned = -0.00121905 Jy ! Component: 1100 - total flux cleaned = -0.00126823 Jy ! Component: 1150 - total flux cleaned = -0.00130049 Jy ! Component: 1200 - total flux cleaned = -0.00130053 Jy ! Component: 1250 - total flux cleaned = -0.00125356 Jy ! Component: 1300 - total flux cleaned = -0.00136202 Jy ! Component: 1350 - total flux cleaned = -0.00130074 Jy ! Component: 1400 - total flux cleaned = -0.00134605 Jy ! Component: 1450 - total flux cleaned = -0.00131621 Jy ! Component: 1500 - total flux cleaned = -0.0013015 Jy ! Component: 1550 - total flux cleaned = -0.00133076 Jy ! Component: 1600 - total flux cleaned = -0.00133075 Jy ! Component: 1650 - total flux cleaned = -0.00124521 Jy ! Component: 1700 - total flux cleaned = -0.00128744 Jy ! Component: 1750 - total flux cleaned = -0.00125948 Jy ! Component: 1800 - total flux cleaned = -0.00121812 Jy ! Component: 1850 - total flux cleaned = -0.00120454 Jy ! Component: 1900 - total flux cleaned = -0.00116445 Jy ! Component: 1950 - total flux cleaned = -0.00119096 Jy ! Component: 2000 - total flux cleaned = -0.00117782 Jy ! Component: 2050 - total flux cleaned = -0.00113898 Jy ! Component: 2100 - total flux cleaned = -0.00110044 Jy ! Component: 2150 - total flux cleaned = -0.00110062 Jy ! Component: 2200 - total flux cleaned = -0.00110055 Jy ! Component: 2250 - total flux cleaned = -0.00106318 Jy ! Component: 2300 - total flux cleaned = -0.00103858 Jy ! Component: 2350 - total flux cleaned = -0.0010386 Jy ! Component: 2400 - total flux cleaned = -0.00106282 Jy ! Component: 2450 - total flux cleaned = -0.00100277 Jy ! Component: 2500 - total flux cleaned = -0.00102669 Jy ! Component: 2550 - total flux cleaned = -0.00101487 Jy ! Component: 2600 - total flux cleaned = -0.000968137 Jy ! Component: 2650 - total flux cleaned = -0.000979998 Jy ! Component: 2700 - total flux cleaned = -0.000945555 Jy ! Component: 2750 - total flux cleaned = -0.000888665 Jy ! Component: 2800 - total flux cleaned = -0.000888729 Jy ! Component: 2850 - total flux cleaned = -0.000832648 Jy ! Component: 2900 - total flux cleaned = -0.000821502 Jy ! Component: 2950 - total flux cleaned = -0.000810714 Jy ! Component: 3000 - total flux cleaned = -0.000788853 Jy ! Component: 3050 - total flux cleaned = -0.000789009 Jy ! Component: 3100 - total flux cleaned = -0.000745957 Jy ! Component: 3150 - total flux cleaned = -0.000735304 Jy ! Component: 3200 - total flux cleaned = -0.000724792 Jy ! Component: 3250 - total flux cleaned = -0.000745771 Jy ! Component: 3300 - total flux cleaned = -0.000683052 Jy ! Component: 3350 - total flux cleaned = -0.000683089 Jy ! Component: 3400 - total flux cleaned = -0.000672863 Jy ! Component: 3450 - total flux cleaned = -0.000642177 Jy ! Component: 3500 - total flux cleaned = -0.00066248 Jy ! Component: 3550 - total flux cleaned = -0.000622218 Jy ! Component: 3600 - total flux cleaned = -0.000612111 Jy ! Component: 3650 - total flux cleaned = -0.000582351 Jy ! Component: 3700 - total flux cleaned = -0.000562439 Jy ! Component: 3750 - total flux cleaned = -0.000552646 Jy ! Component: 3800 - total flux cleaned = -0.000542915 Jy ! Component: 3850 - total flux cleaned = -0.000523603 Jy ! Component: 3900 - total flux cleaned = -0.000494906 Jy ! Component: 3950 - total flux cleaned = -0.000475801 Jy ! Component: 4000 - total flux cleaned = -0.000475792 Jy ! Component: 4050 - total flux cleaned = -0.000447565 Jy ! Total flux subtracted in 4096 components = -0.000438158 Jy ! Clean residual min=-0.000618 max=0.000522 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.104174 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 382 components and 0.104174 Jy ![Exited script file: muppet] wmap "J0501-1355_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.454 at 2.058 degrees (North through East) ! Clean map min=-0.0010824 max=0.08255 Jy/beam ! Writing clean map to FITS file: J0501-1355_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0825502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171425 device "J0501-1355_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0501-1355_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.622984 0.622984 1.24597 2.49194 4.98387 9.96775 19.9355 39.871 79.742 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.241 x 8.454 at 2.058 degrees (North through East) ! Clean map min=-0.0010824 max=0.08255 Jy/beam quit ! Quitting program ! Log file J0501-1355_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:21:35 2016