! Started logfile: J0115-3049_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:14:55 2016 obs J0115-3049_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0115-3049_S_2014_12_20_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970686 visibilities/baseline/integration-bin. ! Found source: J0115-3049 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 16424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0115-3049_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.676765Jy sigma=0.005747 ! Fit after self-cal, rms=0.594785Jy sigma=0.004988 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=6.458 mas, bpa=-2.553 degrees ! Estimated noise=1084.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32441 Jy ! Component: 100 - total flux cleaned = 0.39603 Jy ! Total flux subtracted in 100 components = 0.39603 Jy ! Clean residual min=-0.014080 max=0.038080 Jy/beam ! Clean residual mean=-0.000233 rms=0.004210 Jy/beam ! Combined flux in latest and established models = 0.39603 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.39603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142204Jy sigma=0.001075 ! Fit after self-cal, rms=0.142206Jy sigma=0.001075 ! Inverting map ! Added new window around map position (-3.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352218 Jy ! Component: 100 - total flux cleaned = 0.0549436 Jy ! Total flux subtracted in 100 components = 0.0549436 Jy ! Clean residual min=-0.011704 max=0.027652 Jy/beam ! Clean residual mean=-0.000157 rms=0.003198 Jy/beam ! Combined flux in latest and established models = 0.450973 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.450973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130785Jy sigma=0.000973 ! Fit after self-cal, rms=0.130345Jy sigma=0.000968 ! Inverting map ! Added new window around map position (3.5, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209128 Jy ! Component: 100 - total flux cleaned = 0.0324208 Jy ! Total flux subtracted in 100 components = 0.0324208 Jy ! Clean residual min=-0.013513 max=0.015800 Jy/beam ! Clean residual mean=-0.000113 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 0.483394 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.483394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125676Jy sigma=0.000941 ! Fit after self-cal, rms=0.125647Jy sigma=0.000940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=8.046 mas, bpa=-1.825 degrees ! Estimated noise=653.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103497 Jy ! Component: 100 - total flux cleaned = 0.0116576 Jy ! Component: 150 - total flux cleaned = 0.0127881 Jy ! Component: 200 - total flux cleaned = 0.013527 Jy ! Total flux subtracted in 200 components = 0.013527 Jy ! Clean residual min=-0.013056 max=0.012137 Jy/beam ! Clean residual mean=-0.000131 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 0.496921 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.496921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123637Jy sigma=0.000931 ! Fit after self-cal, rms=0.123637Jy sigma=0.000931 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 1.13 KP 1.12 ! LA 0.99 MK 0.99 NL 1.01 OV 0.96 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.24 KP 1.06 ! LA 0.96 MK 0.99 NL 1.08 OV 0.99 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.15 HN 1.20 KP 0.95 ! LA 0.78 MK 1.02 NL 1.10 OV 0.91 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.14 KP 0.91 ! LA 0.81 MK 1.02 NL 1.00 OV 0.97 ! PT 1.05 SC 1.00 ! ! ! Fit before self-cal, rms=0.123637Jy sigma=0.000931 ! Fit after self-cal, rms=0.114574Jy sigma=0.000827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.048 mas, bpa=-1.766 degrees ! Estimated noise=662.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00895185 Jy ! Component: 100 - total flux cleaned = -0.0136775 Jy ! Component: 150 - total flux cleaned = -0.0141164 Jy ! Component: 200 - total flux cleaned = -0.0142421 Jy ! Total flux subtracted in 200 components = -0.0142421 Jy ! Clean residual min=-0.007797 max=0.007404 Jy/beam ! Clean residual mean=-0.000035 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.482679 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.482679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113911Jy sigma=0.000819 ! Fit after self-cal, rms=0.113927Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113927Jy sigma=0.000819 ! Fit after self-cal, rms=0.115471Jy sigma=0.000802 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=8.053 mas, bpa=-1.771 degrees ! Estimated noise=665.282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00575748 Jy ! Component: 100 - total flux cleaned = -0.00649243 Jy ! Component: 150 - total flux cleaned = -0.00709982 Jy ! Component: 200 - total flux cleaned = -0.00760591 Jy ! Total flux subtracted in 200 components = -0.00760591 Jy ! Clean residual min=-0.005603 max=0.004908 Jy/beam ! Clean residual mean=-0.000032 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.475073 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.475073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115240Jy sigma=0.000798 ! Fit after self-cal, rms=0.115270Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047917 Jy ! Component: 100 - total flux cleaned = -0.000631054 Jy ! Component: 150 - total flux cleaned = -0.000831187 Jy ! Component: 200 - total flux cleaned = -0.000948675 Jy ! Total flux subtracted in 200 components = -0.000948675 Jy ! Clean residual min=-0.005359 max=0.004763 Jy/beam ! Clean residual mean=-0.000033 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.474125 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.474125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115259Jy sigma=0.000797 ! Fit after self-cal, rms=0.115249Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115249Jy sigma=0.000797 ! Fit after self-cal, rms=0.121945Jy sigma=0.000789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.051 mas, bpa=-1.808 degrees ! Estimated noise=665.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032137 Jy ! Component: 100 - total flux cleaned = -0.00373605 Jy ! Component: 150 - total flux cleaned = -0.00382927 Jy ! Component: 200 - total flux cleaned = -0.00399749 Jy ! Total flux subtracted in 200 components = -0.00399749 Jy ! Clean residual min=-0.003595 max=0.003731 Jy/beam ! Clean residual mean=-0.000030 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.470127 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.470127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121727Jy sigma=0.000788 ! Fit after self-cal, rms=0.121777Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114868 Jy ! Component: 100 - total flux cleaned = -0.000185575 Jy ! Component: 150 - total flux cleaned = -0.000122487 Jy ! Component: 200 - total flux cleaned = -1.92937e-06 Jy ! Total flux subtracted in 200 components = -1.92937e-06 Jy ! Clean residual min=-0.003439 max=0.003455 Jy/beam ! Clean residual mean=-0.000030 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.470125 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.470125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121693Jy sigma=0.000787 ! Fit after self-cal, rms=0.121689Jy sigma=0.000787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121689Jy sigma=0.000787 ! Fit after self-cal, rms=0.123318Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=22.01 mas, bpa=3.955 degrees ! Estimated noise=806.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00272162 Jy ! Component: 100 - total flux cleaned = -0.00360167 Jy ! Component: 150 - total flux cleaned = -0.00377693 Jy ! Component: 200 - total flux cleaned = -0.00389717 Jy ! Total flux subtracted in 200 components = -0.00389717 Jy ! Clean residual min=-0.003505 max=0.003984 Jy/beam ! Clean residual mean=-0.000058 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.466228 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 0.466228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123247Jy sigma=0.000786 ! Fit after self-cal, rms=0.123252Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47761e-05 Jy ! Component: 100 - total flux cleaned = -4.58571e-05 Jy ! Component: 150 - total flux cleaned = 2.34327e-05 Jy ! Component: 200 - total flux cleaned = 5.78812e-05 Jy ! Total flux subtracted in 200 components = 5.78812e-05 Jy ! Clean residual min=-0.003469 max=0.003897 Jy/beam ! Clean residual mean=-0.000057 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.466286 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.466286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123215Jy sigma=0.000786 ! Fit after self-cal, rms=0.123214Jy sigma=0.000786 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.049 mas, bpa=-1.779 degrees ! Estimated noise=665.017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.049 at -1.779 degrees (North through East) ! Clean map min=-0.0074536 max=0.41035 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.416 mas, bpa=-2.209 degrees ! Estimated noise=1113.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332912 Jy ! Component: 100 - total flux cleaned = 0.405559 Jy ! Component: 150 - total flux cleaned = 0.428045 Jy ! Component: 200 - total flux cleaned = 0.440972 Jy ! Total flux subtracted in 200 components = 0.440972 Jy ! Clean residual min=-0.006203 max=0.008301 Jy/beam ! Clean residual mean=-0.000065 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.440972 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.440972 Jy ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.049 mas, bpa=-1.779 degrees ! Estimated noise=665.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118548 Jy ! Component: 100 - total flux cleaned = 0.0186614 Jy ! Component: 150 - total flux cleaned = 0.0229899 Jy ! Component: 200 - total flux cleaned = 0.0256392 Jy ! Total flux subtracted in 200 components = 0.0256392 Jy ! Clean residual min=-0.002716 max=0.003164 Jy/beam ! Clean residual mean=-0.000028 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.466612 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.466612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.031 mas, bmaj=22.01 mas, bpa=3.955 degrees ! Estimated noise=806.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245502 Jy ! Component: 100 - total flux cleaned = 0.00260726 Jy ! Component: 150 - total flux cleaned = 0.00264952 Jy ! Component: 200 - total flux cleaned = 0.00268279 Jy ! Total flux subtracted in 200 components = 0.00268279 Jy ! Clean residual min=-0.003266 max=0.003208 Jy/beam ! Clean residual mean=-0.000045 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.469294 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.0761e-05 Jy ! Component: 100 - total flux cleaned = -8.87323e-05 Jy ! Component: 150 - total flux cleaned = -0.00011652 Jy ! Component: 200 - total flux cleaned = -0.000143221 Jy ! Total flux subtracted in 200 components = -0.000143221 Jy ! Clean residual min=-0.003253 max=0.003256 Jy/beam ! Clean residual mean=-0.000045 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.469151 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.469151 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.049 mas, bpa=-1.779 degrees ! Estimated noise=665.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000691483 Jy ! Component: 100 - total flux cleaned = -0.000825907 Jy ! Component: 150 - total flux cleaned = -0.000885253 Jy ! Component: 200 - total flux cleaned = -0.000940402 Jy ! Total flux subtracted in 200 components = -0.000940402 Jy ! Clean residual min=-0.002542 max=0.002503 Jy/beam ! Clean residual mean=-0.000024 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.468211 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.468211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123187Jy sigma=0.000784 ! Fit after self-cal, rms=0.123161Jy sigma=0.000784 wmodel J0115-3049_S_2014_12_20_pus_map.mod ! Writing 89 model components to file: J0115-3049_S_2014_12_20_pus_map.mod wobs J0115-3049_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0115-3049_S_2014_12_20_pus_uvs.fits wwins J0115-3049_S_2014_12_20_pus_map.win ! wwins: Wrote 4 windows to J0115-3049_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228972 Jy ! Component: 100 - total flux cleaned = 0.000231374 Jy ! Component: 150 - total flux cleaned = -2.22978e-05 Jy ! Component: 200 - total flux cleaned = -0.000309319 Jy ! Component: 250 - total flux cleaned = -0.000628322 Jy ! Component: 300 - total flux cleaned = -0.00105539 Jy ! Component: 350 - total flux cleaned = -0.0014341 Jy ! Component: 400 - total flux cleaned = -0.00191432 Jy ! Component: 450 - total flux cleaned = -0.00234703 Jy ! Component: 500 - total flux cleaned = -0.00277033 Jy ! Component: 550 - total flux cleaned = -0.0030809 Jy ! Component: 600 - total flux cleaned = -0.0034868 Jy ! Component: 650 - total flux cleaned = -0.00378552 Jy ! Component: 700 - total flux cleaned = -0.00398037 Jy ! Component: 750 - total flux cleaned = -0.00417256 Jy ! Component: 800 - total flux cleaned = -0.00429852 Jy ! Component: 850 - total flux cleaned = -0.00439128 Jy ! Component: 900 - total flux cleaned = -0.00448247 Jy ! Component: 950 - total flux cleaned = -0.00454318 Jy ! Component: 1000 - total flux cleaned = -0.00466177 Jy ! Component: 1050 - total flux cleaned = -0.00472007 Jy ! Component: 1100 - total flux cleaned = -0.00472032 Jy ! Component: 1150 - total flux cleaned = -0.00477784 Jy ! Component: 1200 - total flux cleaned = -0.00491812 Jy ! Component: 1250 - total flux cleaned = -0.00497349 Jy ! Component: 1300 - total flux cleaned = -0.00508256 Jy ! Component: 1350 - total flux cleaned = -0.00521733 Jy ! Component: 1400 - total flux cleaned = -0.00519031 Jy ! Component: 1450 - total flux cleaned = -0.00529566 Jy ! Component: 1500 - total flux cleaned = -0.00537334 Jy ! Component: 1550 - total flux cleaned = -0.0055015 Jy ! Component: 1600 - total flux cleaned = -0.00562863 Jy ! Component: 1650 - total flux cleaned = -0.00557804 Jy ! Component: 1700 - total flux cleaned = -0.00567729 Jy ! Component: 1750 - total flux cleaned = -0.00572633 Jy ! Component: 1800 - total flux cleaned = -0.00587212 Jy ! Component: 1850 - total flux cleaned = -0.00587167 Jy ! Component: 1900 - total flux cleaned = -0.00584816 Jy ! Component: 1950 - total flux cleaned = -0.00596632 Jy ! Component: 2000 - total flux cleaned = -0.0061527 Jy ! Component: 2050 - total flux cleaned = -0.00619863 Jy ! Component: 2100 - total flux cleaned = -0.0062668 Jy ! Component: 2150 - total flux cleaned = -0.00633448 Jy ! Component: 2200 - total flux cleaned = -0.00646878 Jy ! Component: 2250 - total flux cleaned = -0.00655728 Jy ! Component: 2300 - total flux cleaned = -0.00666709 Jy ! Component: 2350 - total flux cleaned = -0.0067539 Jy ! Component: 2400 - total flux cleaned = -0.00690445 Jy ! Component: 2450 - total flux cleaned = -0.00692537 Jy ! Component: 2500 - total flux cleaned = -0.00696794 Jy ! Component: 2550 - total flux cleaned = -0.00713541 Jy ! Component: 2600 - total flux cleaned = -0.00723931 Jy ! Component: 2650 - total flux cleaned = -0.0073421 Jy ! Component: 2700 - total flux cleaned = -0.00750522 Jy ! Component: 2750 - total flux cleaned = -0.00752502 Jy ! Component: 2800 - total flux cleaned = -0.00768497 Jy ! Component: 2850 - total flux cleaned = -0.00772468 Jy ! Component: 2900 - total flux cleaned = -0.00776422 Jy ! Component: 2950 - total flux cleaned = -0.00778415 Jy ! Component: 3000 - total flux cleaned = -0.00791961 Jy ! Component: 3050 - total flux cleaned = -0.00799641 Jy ! Component: 3100 - total flux cleaned = -0.00809166 Jy ! Component: 3150 - total flux cleaned = -0.00809151 Jy ! Component: 3200 - total flux cleaned = -0.00820371 Jy ! Component: 3250 - total flux cleaned = -0.00824093 Jy ! Component: 3300 - total flux cleaned = -0.00835168 Jy ! Component: 3350 - total flux cleaned = -0.00840675 Jy ! Component: 3400 - total flux cleaned = -0.00835226 Jy ! Component: 3450 - total flux cleaned = -0.00849645 Jy ! Component: 3500 - total flux cleaned = -0.0086217 Jy ! Component: 3550 - total flux cleaned = -0.00862176 Jy ! Component: 3600 - total flux cleaned = -0.00869237 Jy ! Component: 3650 - total flux cleaned = -0.00874488 Jy ! Component: 3700 - total flux cleaned = -0.00883175 Jy ! Component: 3750 - total flux cleaned = -0.00886651 Jy ! Component: 3800 - total flux cleaned = -0.00896931 Jy ! Component: 3850 - total flux cleaned = -0.00886698 Jy ! Component: 3900 - total flux cleaned = -0.00898558 Jy ! Component: 3950 - total flux cleaned = -0.00896879 Jy ! Component: 4000 - total flux cleaned = -0.00910245 Jy ! Component: 4050 - total flux cleaned = -0.00911899 Jy ! Total flux subtracted in 4096 components = -0.00913572 Jy ! Clean residual min=-0.001037 max=0.000822 Jy/beam ! Clean residual mean=-0.000006 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.459075 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 396 components and 0.459075 Jy ![Exited script file: muppet] wmap "J0115-3049_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.049 at -1.779 degrees (North through East) ! Clean map min=-0.0026481 max=0.4192 Jy/beam ! Writing clean map to FITS file: J0115-3049_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.419203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0003185 device "J0115-3049_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0115-3049_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.227933 0.227933 0.455866 0.911731 1.82346 3.64692 7.29385 14.5877 29.1754 58.3508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.419 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.049 at -1.779 degrees (North through East) ! Clean map min=-0.0026481 max=0.4192 Jy/beam quit ! Quitting program ! Log file J0115-3049_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:15:02 2016