! Started logfile: J0045-3705_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:12:55 2016 obs J0045-3705_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0045-3705_S_2014_12_20_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881785 visibilities/baseline/integration-bin. ! Found source: J0045-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 19364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0045-3705_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887745Jy sigma=0.006833 ! Fit after self-cal, rms=0.825419Jy sigma=0.006367 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=6.342 mas, bpa=2.564 degrees ! Estimated noise=1206.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138728 Jy ! Component: 100 - total flux cleaned = 0.169119 Jy ! Total flux subtracted in 100 components = 0.169119 Jy ! Clean residual min=-0.008184 max=0.017068 Jy/beam ! Clean residual mean=-0.000064 rms=0.002146 Jy/beam ! Combined flux in latest and established models = 0.169119 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.169119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121240Jy sigma=0.000843 ! Fit after self-cal, rms=0.121228Jy sigma=0.000843 ! Inverting map ! Added new window around map position (4, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150119 Jy ! Component: 100 - total flux cleaned = 0.0232167 Jy ! Total flux subtracted in 100 components = 0.0232167 Jy ! Clean residual min=-0.007577 max=0.014408 Jy/beam ! Clean residual mean=-0.000050 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.192336 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.192336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118524Jy sigma=0.000820 ! Fit after self-cal, rms=0.118258Jy sigma=0.000817 ! Inverting map ! Added new window around map position (-3.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114749 Jy ! Component: 100 - total flux cleaned = 0.0185151 Jy ! Total flux subtracted in 100 components = 0.0185151 Jy ! Clean residual min=-0.006318 max=0.007395 Jy/beam ! Clean residual mean=-0.000041 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.210851 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.210851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116760Jy sigma=0.000808 ! Fit after self-cal, rms=0.116726Jy sigma=0.000807 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.016 mas, bpa=1.566 degrees ! Estimated noise=667.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622888 Jy ! Component: 100 - total flux cleaned = 0.00904869 Jy ! Component: 150 - total flux cleaned = 0.00991459 Jy ! Component: 200 - total flux cleaned = 0.0106724 Jy ! Total flux subtracted in 200 components = 0.0106724 Jy ! Clean residual min=-0.006078 max=0.006007 Jy/beam ! Clean residual mean=-0.000089 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.221523 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.221523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116170Jy sigma=0.000805 ! Fit after self-cal, rms=0.116166Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.86 HN 1.40 KP 1.09 ! LA 0.97 MK 1.01 NL 1.02 OV 0.97 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.56 KP 1.06 ! LA 0.94 MK 0.98 NL 1.13 OV 1.00 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 HN 1.56 KP 0.95 ! LA 0.78 MK 1.04 NL 1.14 OV 0.90 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 1.44 KP 0.91 ! LA 0.79 MK 1.01 NL 1.06 OV 0.98 ! PT 1.04 SC 0.96 ! ! ! Fit before self-cal, rms=0.116166Jy sigma=0.000805 ! Fit after self-cal, rms=0.126220Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.991 mas, bpa=1.861 degrees ! Estimated noise=681.897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315956 Jy ! Component: 100 - total flux cleaned = -0.00397926 Jy ! Component: 150 - total flux cleaned = -0.0045423 Jy ! Component: 200 - total flux cleaned = -0.00494082 Jy ! Total flux subtracted in 200 components = -0.00494082 Jy ! Clean residual min=-0.002992 max=0.002686 Jy/beam ! Clean residual mean=-0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.216582 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.216582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126072Jy sigma=0.000782 ! Fit after self-cal, rms=0.126208Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126208Jy sigma=0.000781 ! Fit after self-cal, rms=0.128612Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.989 mas, bpa=1.902 degrees ! Estimated noise=680.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190987 Jy ! Component: 100 - total flux cleaned = -0.00236705 Jy ! Component: 150 - total flux cleaned = -0.00269945 Jy ! Component: 200 - total flux cleaned = -0.00294051 Jy ! Total flux subtracted in 200 components = -0.00294051 Jy ! Clean residual min=-0.002739 max=0.002374 Jy/beam ! Clean residual mean=-0.000004 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.213642 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 96 components and 0.213642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128547Jy sigma=0.000780 ! Fit after self-cal, rms=0.128573Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206718 Jy ! Component: 100 - total flux cleaned = -0.000369222 Jy ! Component: 150 - total flux cleaned = -0.000514367 Jy ! Component: 200 - total flux cleaned = -0.000647056 Jy ! Total flux subtracted in 200 components = -0.000647056 Jy ! Clean residual min=-0.002653 max=0.002340 Jy/beam ! Clean residual mean=-0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.212995 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.212995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128549Jy sigma=0.000780 ! Fit after self-cal, rms=0.128548Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128548Jy sigma=0.000780 ! Fit after self-cal, rms=0.130819Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=7.988 mas, bpa=1.912 degrees ! Estimated noise=680.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120809 Jy ! Component: 100 - total flux cleaned = -0.00142092 Jy ! Component: 150 - total flux cleaned = -0.0015741 Jy ! Component: 200 - total flux cleaned = -0.00168002 Jy ! Total flux subtracted in 200 components = -0.00168002 Jy ! Clean residual min=-0.002441 max=0.002151 Jy/beam ! Clean residual mean=-0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.211315 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.211315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130786Jy sigma=0.000780 ! Fit after self-cal, rms=0.130809Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114016 Jy ! Component: 100 - total flux cleaned = -0.000207647 Jy ! Component: 150 - total flux cleaned = -0.000320704 Jy ! Component: 200 - total flux cleaned = -0.000396863 Jy ! Total flux subtracted in 200 components = -0.000396863 Jy ! Clean residual min=-0.002393 max=0.002134 Jy/beam ! Clean residual mean=-0.000007 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.210918 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.210918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130794Jy sigma=0.000779 ! Fit after self-cal, rms=0.130792Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130792Jy sigma=0.000779 ! Fit after self-cal, rms=0.132271Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.487 mas, bmaj=26.45 mas, bpa=6.442 degrees ! Estimated noise=834.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106371 Jy ! Component: 100 - total flux cleaned = -0.00140295 Jy ! Component: 150 - total flux cleaned = -0.00147174 Jy ! Component: 200 - total flux cleaned = -0.00154777 Jy ! Total flux subtracted in 200 components = -0.00154777 Jy ! Clean residual min=-0.002483 max=0.002074 Jy/beam ! Clean residual mean=-0.000015 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.20937 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.20937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132261Jy sigma=0.000779 ! Fit after self-cal, rms=0.132275Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.45948e-05 Jy ! Component: 100 - total flux cleaned = -0.00011367 Jy ! Component: 150 - total flux cleaned = -0.000148995 Jy ! Component: 200 - total flux cleaned = -0.000191619 Jy ! Total flux subtracted in 200 components = -0.000191619 Jy ! Clean residual min=-0.002465 max=0.002066 Jy/beam ! Clean residual mean=-0.000016 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.209178 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 134 components and 0.209178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132273Jy sigma=0.000779 ! Fit after self-cal, rms=0.132272Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.991 mas, bpa=1.904 degrees ! Estimated noise=679.605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.037 x 7.991 at 1.904 degrees (North through East) ! Clean map min=-0.002231 max=0.17154 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=6.291 mas, bpa=3.17 degrees ! Estimated noise=1253.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143727 Jy ! Component: 100 - total flux cleaned = 0.176323 Jy ! Component: 150 - total flux cleaned = 0.187344 Jy ! Component: 200 - total flux cleaned = 0.193393 Jy ! Total flux subtracted in 200 components = 0.193393 Jy ! Clean residual min=-0.004029 max=0.004041 Jy/beam ! Clean residual mean=-0.000015 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.193393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.193393 Jy ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.991 mas, bpa=1.904 degrees ! Estimated noise=679.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697423 Jy ! Component: 100 - total flux cleaned = 0.0105804 Jy ! Component: 150 - total flux cleaned = 0.0127534 Jy ! Component: 200 - total flux cleaned = 0.0141229 Jy ! Total flux subtracted in 200 components = 0.0141229 Jy ! Clean residual min=-0.002234 max=0.001929 Jy/beam ! Clean residual mean=-0.000012 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.207516 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 61 components and 0.207516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.487 mas, bmaj=26.45 mas, bpa=6.442 degrees ! Estimated noise=834.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112632 Jy ! Component: 100 - total flux cleaned = 0.00147519 Jy ! Component: 150 - total flux cleaned = 0.00153738 Jy ! Component: 200 - total flux cleaned = 0.00157837 Jy ! Total flux subtracted in 200 components = 0.00157837 Jy ! Clean residual min=-0.002316 max=0.002059 Jy/beam ! Clean residual mean=-0.000016 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.209094 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80656e-05 Jy ! Component: 100 - total flux cleaned = 5.08019e-05 Jy ! Component: 150 - total flux cleaned = 7.55269e-05 Jy ! Component: 200 - total flux cleaned = 9.96731e-05 Jy ! Total flux subtracted in 200 components = 9.96731e-05 Jy ! Clean residual min=-0.002312 max=0.002060 Jy/beam ! Clean residual mean=-0.000016 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.209194 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.209194 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.991 mas, bpa=1.904 degrees ! Estimated noise=679.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.97784e-05 Jy ! Component: 100 - total flux cleaned = -0.00011755 Jy ! Component: 150 - total flux cleaned = -9.18905e-05 Jy ! Component: 200 - total flux cleaned = -9.19665e-05 Jy ! Total flux subtracted in 200 components = -9.19665e-05 Jy ! Clean residual min=-0.002199 max=0.002016 Jy/beam ! Clean residual mean=-0.000008 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.209102 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.209102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132276Jy sigma=0.000779 ! Fit after self-cal, rms=0.132261Jy sigma=0.000779 wmodel J0045-3705_S_2014_12_20_pus_map.mod ! Writing 87 model components to file: J0045-3705_S_2014_12_20_pus_map.mod wobs J0045-3705_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0045-3705_S_2014_12_20_pus_uvs.fits wwins J0045-3705_S_2014_12_20_pus_map.win ! wwins: Wrote 4 windows to J0045-3705_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523656 Jy ! Component: 100 - total flux cleaned = -0.000630517 Jy ! Component: 150 - total flux cleaned = -0.000663425 Jy ! Component: 200 - total flux cleaned = -0.000850933 Jy ! Component: 250 - total flux cleaned = -0.00106283 Jy ! Component: 300 - total flux cleaned = -0.00132876 Jy ! Component: 350 - total flux cleaned = -0.00158914 Jy ! Component: 400 - total flux cleaned = -0.00181543 Jy ! Component: 450 - total flux cleaned = -0.00206439 Jy ! Component: 500 - total flux cleaned = -0.00225437 Jy ! Component: 550 - total flux cleaned = -0.0024409 Jy ! Component: 600 - total flux cleaned = -0.00262395 Jy ! Component: 650 - total flux cleaned = -0.00272623 Jy ! Component: 700 - total flux cleaned = -0.00285182 Jy ! Component: 750 - total flux cleaned = -0.00290144 Jy ! Component: 800 - total flux cleaned = -0.00302397 Jy ! Component: 850 - total flux cleaned = -0.00312034 Jy ! Component: 900 - total flux cleaned = -0.00316773 Jy ! Component: 950 - total flux cleaned = -0.00316793 Jy ! Component: 1000 - total flux cleaned = -0.00321431 Jy ! Component: 1050 - total flux cleaned = -0.00325993 Jy ! Component: 1100 - total flux cleaned = -0.00321525 Jy ! Component: 1150 - total flux cleaned = -0.00325959 Jy ! Component: 1200 - total flux cleaned = -0.003325 Jy ! Component: 1250 - total flux cleaned = -0.00334672 Jy ! Component: 1300 - total flux cleaned = -0.00341067 Jy ! Component: 1350 - total flux cleaned = -0.00341093 Jy ! Component: 1400 - total flux cleaned = -0.00343195 Jy ! Component: 1450 - total flux cleaned = -0.0034938 Jy ! Component: 1500 - total flux cleaned = -0.00349424 Jy ! Component: 1550 - total flux cleaned = -0.00357532 Jy ! Component: 1600 - total flux cleaned = -0.00361518 Jy ! Component: 1650 - total flux cleaned = -0.00359555 Jy ! Component: 1700 - total flux cleaned = -0.0035955 Jy ! Component: 1750 - total flux cleaned = -0.00367321 Jy ! Component: 1800 - total flux cleaned = -0.00369261 Jy ! Component: 1850 - total flux cleaned = -0.00376833 Jy ! Component: 1900 - total flux cleaned = -0.00371174 Jy ! Component: 1950 - total flux cleaned = -0.00378626 Jy ! Component: 2000 - total flux cleaned = -0.00376763 Jy ! Component: 2050 - total flux cleaned = -0.00374927 Jy ! Component: 2100 - total flux cleaned = -0.00374941 Jy ! Component: 2150 - total flux cleaned = -0.00373131 Jy ! Component: 2200 - total flux cleaned = -0.003767 Jy ! Component: 2250 - total flux cleaned = -0.00378477 Jy ! Component: 2300 - total flux cleaned = -0.0037496 Jy ! Component: 2350 - total flux cleaned = -0.00376713 Jy ! Component: 2400 - total flux cleaned = -0.00376719 Jy ! Component: 2450 - total flux cleaned = -0.00376731 Jy ! Component: 2500 - total flux cleaned = -0.00373326 Jy ! Component: 2550 - total flux cleaned = -0.00376734 Jy ! Component: 2600 - total flux cleaned = -0.00375063 Jy ! Component: 2650 - total flux cleaned = -0.00375066 Jy ! Component: 2700 - total flux cleaned = -0.00380005 Jy ! Component: 2750 - total flux cleaned = -0.0038328 Jy ! Component: 2800 - total flux cleaned = -0.00389796 Jy ! Component: 2850 - total flux cleaned = -0.00396245 Jy ! Component: 2900 - total flux cleaned = -0.00397848 Jy ! Component: 2950 - total flux cleaned = -0.0039946 Jy ! Component: 3000 - total flux cleaned = -0.00407398 Jy ! Component: 3050 - total flux cleaned = -0.00415272 Jy ! Component: 3100 - total flux cleaned = -0.00416845 Jy ! Component: 3150 - total flux cleaned = -0.00419958 Jy ! Component: 3200 - total flux cleaned = -0.00429231 Jy ! Component: 3250 - total flux cleaned = -0.00433819 Jy ! Component: 3300 - total flux cleaned = -0.00438387 Jy ! Component: 3350 - total flux cleaned = -0.00447488 Jy ! Component: 3400 - total flux cleaned = -0.00450506 Jy ! Component: 3450 - total flux cleaned = -0.0045501 Jy ! Component: 3500 - total flux cleaned = -0.00457986 Jy ! Component: 3550 - total flux cleaned = -0.00462428 Jy ! Component: 3600 - total flux cleaned = -0.00472742 Jy ! Component: 3650 - total flux cleaned = -0.00475679 Jy ! Component: 3700 - total flux cleaned = -0.00484425 Jy ! Component: 3750 - total flux cleaned = -0.00487335 Jy ! Component: 3800 - total flux cleaned = -0.0049598 Jy ! Component: 3850 - total flux cleaned = -0.00500267 Jy ! Component: 3900 - total flux cleaned = -0.00498839 Jy ! Component: 3950 - total flux cleaned = -0.0050734 Jy ! Component: 4000 - total flux cleaned = -0.00507347 Jy ! Component: 4050 - total flux cleaned = -0.00510149 Jy ! Total flux subtracted in 4096 components = -0.00515724 Jy ! Clean residual min=-0.000780 max=0.000840 Jy/beam ! Clean residual mean=-0.000008 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.203945 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 341 components and 0.203944 Jy ![Exited script file: muppet] wmap "J0045-3705_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.037 x 7.991 at 1.904 degrees (North through East) ! Clean map min=-0.0018069 max=0.17364 Jy/beam ! Writing clean map to FITS file: J0045-3705_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173644 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000258244 device "J0045-3705_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0045-3705_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.44616 0.44616 0.892321 1.78464 3.56928 7.13857 14.2771 28.5543 57.1085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.037 x 7.991 at 1.904 degrees (North through East) ! Clean map min=-0.0018069 max=0.17364 Jy/beam quit ! Quitting program ! Log file J0045-3705_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:13:02 2016