! Started logfile: J2358+0430_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:07:31 2016 obs J2358+0430_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2358+0430_S_2014_06_09_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.606584 visibilities/baseline/integration-bin. ! Found source: J2358+0430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2358+0430_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.851031Jy sigma=0.010039 ! Fit after self-cal, rms=0.833857Jy sigma=0.009841 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=9.336 mas, bpa=12.16 degrees ! Estimated noise=840.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130794 Jy ! Component: 100 - total flux cleaned = 0.159327 Jy ! Total flux subtracted in 100 components = 0.159327 Jy ! Clean residual min=-0.004716 max=0.008347 Jy/beam ! Clean residual mean=0.000011 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.159327 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.159327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074037Jy sigma=0.000809 ! Fit after self-cal, rms=0.074033Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.272 mas, bmaj=10.2 mas, bpa=10.02 degrees ! Estimated noise=649.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010582 Jy ! Component: 100 - total flux cleaned = 0.0165649 Jy ! Component: 150 - total flux cleaned = 0.0202028 Jy ! Component: 200 - total flux cleaned = 0.022709 Jy ! Total flux subtracted in 200 components = 0.022709 Jy ! Clean residual min=-0.003649 max=0.003560 Jy/beam ! Clean residual mean=0.000000 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.182036 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.182036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072402Jy sigma=0.000790 ! Fit after self-cal, rms=0.072371Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.96 KP 1.03 ! LA 1.18 MK 1.00* NL 0.98 OV 0.97 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 1.02 ! LA 1.11 MK 1.00* NL 1.07 OV 1.01 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.03 KP 0.92 ! LA 0.90 MK 1.00* NL 1.04 OV 0.93 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 0.89 ! LA 0.88 MK 1.00* NL 1.03 OV 0.98 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.072371Jy sigma=0.000790 ! Fit after self-cal, rms=0.068958Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=10.24 mas, bpa=9.944 degrees ! Estimated noise=644.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011268 Jy ! Component: 100 - total flux cleaned = 0.00129015 Jy ! Component: 150 - total flux cleaned = 0.00145453 Jy ! Component: 200 - total flux cleaned = 0.00161658 Jy ! Total flux subtracted in 200 components = 0.00161658 Jy ! Clean residual min=-0.001909 max=0.001892 Jy/beam ! Clean residual mean=-0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.183652 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 0.183652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068909Jy sigma=0.000766 ! Fit after self-cal, rms=0.068908Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068908Jy sigma=0.000766 ! Fit after self-cal, rms=0.068895Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=10.24 mas, bpa=9.962 degrees ! Estimated noise=644.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234781 Jy ! Component: 100 - total flux cleaned = 0.000399761 Jy ! Component: 150 - total flux cleaned = 0.00054797 Jy ! Component: 200 - total flux cleaned = 0.000683303 Jy ! Total flux subtracted in 200 components = 0.000683303 Jy ! Clean residual min=-0.001517 max=0.001711 Jy/beam ! Clean residual mean=-0.000003 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.184336 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.184336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068881Jy sigma=0.000764 ! Fit after self-cal, rms=0.068881Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284717 Jy ! Component: 100 - total flux cleaned = 0.000391545 Jy ! Component: 150 - total flux cleaned = 0.000472669 Jy ! Component: 200 - total flux cleaned = 0.000547627 Jy ! Total flux subtracted in 200 components = 0.000547627 Jy ! Clean residual min=-0.001525 max=0.001609 Jy/beam ! Clean residual mean=-0.000003 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.184883 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.184883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068874Jy sigma=0.000764 ! Fit after self-cal, rms=0.068873Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068873Jy sigma=0.000764 ! Fit after self-cal, rms=0.068912Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.26 mas, bmaj=10.24 mas, bpa=9.973 degrees ! Estimated noise=645.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206747 Jy ! Component: 100 - total flux cleaned = 0.000329512 Jy ! Component: 150 - total flux cleaned = 0.000427829 Jy ! Component: 200 - total flux cleaned = 0.000507167 Jy ! Total flux subtracted in 200 components = 0.000507167 Jy ! Clean residual min=-0.001499 max=0.001570 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.18539 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.18539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068906Jy sigma=0.000764 ! Fit after self-cal, rms=0.068905Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164288 Jy ! Component: 100 - total flux cleaned = 0.000226761 Jy ! Component: 150 - total flux cleaned = 0.000285847 Jy ! Component: 200 - total flux cleaned = 0.000330907 Jy ! Total flux subtracted in 200 components = 0.000330907 Jy ! Clean residual min=-0.001501 max=0.001564 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.185721 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.185721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068902Jy sigma=0.000764 ! Fit after self-cal, rms=0.068902Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068902Jy sigma=0.000764 ! Fit after self-cal, rms=0.068940Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=15.16 mas, bpa=-7.893 degrees ! Estimated noise=727.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026195 Jy ! Component: 100 - total flux cleaned = 0.000287359 Jy ! Component: 150 - total flux cleaned = 0.000298395 Jy ! Component: 200 - total flux cleaned = 0.000308453 Jy ! Total flux subtracted in 200 components = 0.000308453 Jy ! Clean residual min=-0.001526 max=0.001597 Jy/beam ! Clean residual mean=-0.000005 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.18603 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.18603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068939Jy sigma=0.000764 ! Fit after self-cal, rms=0.068939Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.92959e-05 Jy ! Component: 100 - total flux cleaned = 8.03865e-05 Jy ! Component: 150 - total flux cleaned = 6.35171e-05 Jy ! Component: 200 - total flux cleaned = 6.33702e-05 Jy ! Total flux subtracted in 200 components = 6.33702e-05 Jy ! Clean residual min=-0.001513 max=0.001597 Jy/beam ! Clean residual mean=-0.000005 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.186093 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.186093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068939Jy sigma=0.000764 ! Fit after self-cal, rms=0.068938Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.24 mas, bpa=9.975 degrees ! Estimated noise=645.623 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.24 at 9.975 degrees (North through East) ! Clean map min=-0.0022642 max=0.16564 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=9.35 mas, bpa=12.19 degrees ! Estimated noise=833.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129685 Jy ! Component: 100 - total flux cleaned = 0.157965 Jy ! Component: 150 - total flux cleaned = 0.16646 Jy ! Component: 200 - total flux cleaned = 0.17165 Jy ! Total flux subtracted in 200 components = 0.17165 Jy ! Clean residual min=-0.002539 max=0.002772 Jy/beam ! Clean residual mean=0.000004 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.17165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.17165 Jy ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.24 mas, bpa=9.975 degrees ! Estimated noise=645.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450238 Jy ! Component: 100 - total flux cleaned = 0.00745965 Jy ! Component: 150 - total flux cleaned = 0.00951889 Jy ! Component: 200 - total flux cleaned = 0.0108153 Jy ! Total flux subtracted in 200 components = 0.0108153 Jy ! Clean residual min=-0.001753 max=0.001801 Jy/beam ! Clean residual mean=-0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.182466 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 58 components and 0.182466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.854 mas, bmaj=15.16 mas, bpa=-7.893 degrees ! Estimated noise=727.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139219 Jy ! Component: 100 - total flux cleaned = 0.00223588 Jy ! Component: 150 - total flux cleaned = 0.00248585 Jy ! Component: 200 - total flux cleaned = 0.00257193 Jy ! Total flux subtracted in 200 components = 0.00257193 Jy ! Clean residual min=-0.001716 max=0.001643 Jy/beam ! Clean residual mean=-0.000004 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.185038 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.92566e-05 Jy ! Component: 100 - total flux cleaned = 0.00013196 Jy ! Component: 150 - total flux cleaned = 0.000198456 Jy ! Component: 200 - total flux cleaned = 0.000228741 Jy ! Total flux subtracted in 200 components = 0.000228741 Jy ! Clean residual min=-0.001638 max=0.001556 Jy/beam ! Clean residual mean=-0.000004 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.185266 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 91 components and 0.185266 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=10.24 mas, bpa=9.975 degrees ! Estimated noise=645.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234512 Jy ! Component: 100 - total flux cleaned = -0.000184379 Jy ! Component: 150 - total flux cleaned = -0.00012057 Jy ! Component: 200 - total flux cleaned = -4.44282e-05 Jy ! Total flux subtracted in 200 components = -4.44282e-05 Jy ! Clean residual min=-0.001471 max=0.001548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.185222 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 101 components and 0.185222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068944Jy sigma=0.000764 ! Fit after self-cal, rms=0.068941Jy sigma=0.000764 wmodel J2358+0430_S_2014_06_09_pus_map.mod ! Writing 101 model components to file: J2358+0430_S_2014_06_09_pus_map.mod wobs J2358+0430_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2358+0430_S_2014_06_09_pus_uvs.fits wwins J2358+0430_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J2358+0430_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320096 Jy ! Component: 100 - total flux cleaned = 0.000294921 Jy ! Component: 150 - total flux cleaned = 0.000243783 Jy ! Component: 200 - total flux cleaned = 0.000293193 Jy ! Component: 250 - total flux cleaned = 0.000317685 Jy ! Component: 300 - total flux cleaned = 0.000431768 Jy ! Component: 350 - total flux cleaned = 0.000563527 Jy ! Component: 400 - total flux cleaned = 0.00064872 Jy ! Component: 450 - total flux cleaned = 0.000732011 Jy ! Component: 500 - total flux cleaned = 0.000751882 Jy ! Component: 550 - total flux cleaned = 0.00065336 Jy ! Component: 600 - total flux cleaned = 0.000691735 Jy ! Component: 650 - total flux cleaned = 0.000690951 Jy ! Component: 700 - total flux cleaned = 0.000746394 Jy ! Component: 750 - total flux cleaned = 0.000818976 Jy ! Component: 800 - total flux cleaned = 0.00088983 Jy ! Component: 850 - total flux cleaned = 0.000959131 Jy ! Component: 900 - total flux cleaned = 0.000993122 Jy ! Component: 950 - total flux cleaned = 0.00104335 Jy ! Component: 1000 - total flux cleaned = 0.00114252 Jy ! Component: 1050 - total flux cleaned = 0.00114233 Jy ! Component: 1100 - total flux cleaned = 0.0011743 Jy ! Component: 1150 - total flux cleaned = 0.00117428 Jy ! Component: 1200 - total flux cleaned = 0.00117435 Jy ! Component: 1250 - total flux cleaned = 0.00123574 Jy ! Component: 1300 - total flux cleaned = 0.0012961 Jy ! Component: 1350 - total flux cleaned = 0.00125153 Jy ! Component: 1400 - total flux cleaned = 0.00131068 Jy ! Component: 1450 - total flux cleaned = 0.00135437 Jy ! Component: 1500 - total flux cleaned = 0.00142607 Jy ! Component: 1550 - total flux cleaned = 0.00152561 Jy ! Component: 1600 - total flux cleaned = 0.00159586 Jy ! Component: 1650 - total flux cleaned = 0.00162372 Jy ! Component: 1700 - total flux cleaned = 0.00170621 Jy ! Component: 1750 - total flux cleaned = 0.00178782 Jy ! Component: 1800 - total flux cleaned = 0.00181478 Jy ! Component: 1850 - total flux cleaned = 0.00194771 Jy ! Component: 1900 - total flux cleaned = 0.00200023 Jy ! Component: 1950 - total flux cleaned = 0.00202625 Jy ! Component: 2000 - total flux cleaned = 0.00205203 Jy ! Component: 2050 - total flux cleaned = 0.00210323 Jy ! Component: 2100 - total flux cleaned = 0.00215385 Jy ! Component: 2150 - total flux cleaned = 0.00215381 Jy ! Component: 2200 - total flux cleaned = 0.00225302 Jy ! Component: 2250 - total flux cleaned = 0.00231449 Jy ! Component: 2300 - total flux cleaned = 0.0023267 Jy ! Component: 2350 - total flux cleaned = 0.00237492 Jy ! Component: 2400 - total flux cleaned = 0.00243451 Jy ! Component: 2450 - total flux cleaned = 0.00245826 Jy ! Component: 2500 - total flux cleaned = 0.00249348 Jy ! Component: 2550 - total flux cleaned = 0.00254008 Jy ! Component: 2600 - total flux cleaned = 0.00260908 Jy ! Component: 2650 - total flux cleaned = 0.00258601 Jy ! Component: 2700 - total flux cleaned = 0.00264248 Jy ! Component: 2750 - total flux cleaned = 0.00265358 Jy ! Component: 2800 - total flux cleaned = 0.00270921 Jy ! Component: 2850 - total flux cleaned = 0.00275341 Jy ! Component: 2900 - total flux cleaned = 0.00276435 Jy ! Component: 2950 - total flux cleaned = 0.00281845 Jy ! Component: 3000 - total flux cleaned = 0.00285062 Jy ! Component: 3050 - total flux cleaned = 0.00288253 Jy ! Component: 3100 - total flux cleaned = 0.00290368 Jy ! Component: 3150 - total flux cleaned = 0.00292461 Jy ! Component: 3200 - total flux cleaned = 0.00292449 Jy ! Component: 3250 - total flux cleaned = 0.00292447 Jy ! Component: 3300 - total flux cleaned = 0.00290395 Jy ! Component: 3350 - total flux cleaned = 0.00291409 Jy ! Component: 3400 - total flux cleaned = 0.00291405 Jy ! Component: 3450 - total flux cleaned = 0.00292407 Jy ! Component: 3500 - total flux cleaned = 0.00293404 Jy ! Component: 3550 - total flux cleaned = 0.00290433 Jy ! Component: 3600 - total flux cleaned = 0.00290438 Jy ! Component: 3650 - total flux cleaned = 0.00287507 Jy ! Component: 3700 - total flux cleaned = 0.00290436 Jy ! Component: 3750 - total flux cleaned = 0.00289463 Jy ! Component: 3800 - total flux cleaned = 0.00288503 Jy ! Component: 3850 - total flux cleaned = 0.0028659 Jy ! Component: 3900 - total flux cleaned = 0.00286595 Jy ! Component: 3950 - total flux cleaned = 0.0028471 Jy ! Component: 4000 - total flux cleaned = 0.00284709 Jy ! Component: 4050 - total flux cleaned = 0.00285653 Jy ! Total flux subtracted in 4096 components = 0.00285651 Jy ! Clean residual min=-0.000497 max=0.000547 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.188079 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 362 components and 0.188079 Jy ![Exited script file: muppet] wmap "J2358+0430_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.24 at 9.975 degrees (North through East) ! Clean map min=-0.0012849 max=0.1651 Jy/beam ! Writing clean map to FITS file: J2358+0430_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.165101 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164542 device "J2358+0430_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2358+0430_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.298984 0.298984 0.597968 1.19594 2.39187 4.78375 9.56749 19.135 38.27 76.5399 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.259 x 10.24 at 9.975 degrees (North through East) ! Clean map min=-0.0012849 max=0.1651 Jy/beam quit ! Quitting program ! Log file J2358+0430_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:07:36 2016