! Started logfile: J2259-2920_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:06:16 2016 obs J2259-2920_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2259-2920_S_2014_06_09_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611797 visibilities/baseline/integration-bin. ! Found source: J2259-2920 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2259-2920_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992742Jy sigma=0.008298 ! Fit after self-cal, rms=0.936487Jy sigma=0.007899 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=13.94 mas, bpa=21.46 degrees ! Estimated noise=1579.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544166 Jy ! Component: 100 - total flux cleaned = 0.0664518 Jy ! Total flux subtracted in 100 components = 0.0664518 Jy ! Clean residual min=-0.004409 max=0.004707 Jy/beam ! Clean residual mean=-0.000011 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.0664518 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0664518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104947Jy sigma=0.000754 ! Fit after self-cal, rms=0.104537Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=16.18 mas, bpa=19.66 degrees ! Estimated noise=916.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388909 Jy ! Component: 100 - total flux cleaned = 0.0053142 Jy ! Component: 150 - total flux cleaned = 0.00560006 Jy ! Component: 200 - total flux cleaned = 0.00571495 Jy ! Total flux subtracted in 200 components = 0.00571495 Jy ! Clean residual min=-0.002832 max=0.002251 Jy/beam ! Clean residual mean=0.000003 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0721668 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 28 components and 0.0721667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104374Jy sigma=0.000751 ! Fit after self-cal, rms=0.104347Jy sigma=0.000750 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.96 KP 1.04 ! LA 1.10 MK 1.00* NL 0.96 OV 1.05 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.98 KP 1.03 ! LA 1.11 MK 1.00* NL 1.09 OV 1.04 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.99 KP 0.90 ! LA 0.88 MK 1.00* NL 1.01 OV 0.97 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 0.94 ! LA 0.85 MK 1.00* NL 0.97 OV 1.06 ! PT 0.97 SC 0.90 ! ! ! Fit before self-cal, rms=0.104347Jy sigma=0.000750 ! Fit after self-cal, rms=0.101524Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=16.09 mas, bpa=19.85 degrees ! Estimated noise=909.361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757799 Jy ! Component: 100 - total flux cleaned = 0.000812138 Jy ! Component: 150 - total flux cleaned = 0.000837277 Jy ! Component: 200 - total flux cleaned = 0.000861193 Jy ! Total flux subtracted in 200 components = 0.000861193 Jy ! Clean residual min=-0.002489 max=0.002141 Jy/beam ! Clean residual mean=0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0730279 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0730279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101507Jy sigma=0.000748 ! Fit after self-cal, rms=0.101448Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101448Jy sigma=0.000748 ! Fit after self-cal, rms=0.100969Jy sigma=0.000748 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=16.04 mas, bpa=19.89 degrees ! Estimated noise=909.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000678667 Jy ! Component: 100 - total flux cleaned = 0.000726449 Jy ! Component: 150 - total flux cleaned = 0.000726026 Jy ! Component: 200 - total flux cleaned = 0.000706195 Jy ! Total flux subtracted in 200 components = 0.000706195 Jy ! Clean residual min=-0.002534 max=0.002079 Jy/beam ! Clean residual mean=0.000005 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0737341 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0737341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100956Jy sigma=0.000748 ! Fit after self-cal, rms=0.100935Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.42591e-05 Jy ! Component: 100 - total flux cleaned = 3.52069e-05 Jy ! Component: 150 - total flux cleaned = 1.64127e-05 Jy ! Component: 200 - total flux cleaned = -1.71417e-06 Jy ! Total flux subtracted in 200 components = -1.71417e-06 Jy ! Clean residual min=-0.002531 max=0.002087 Jy/beam ! Clean residual mean=0.000005 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0737324 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.0737324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100927Jy sigma=0.000748 ! Fit after self-cal, rms=0.100918Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100918Jy sigma=0.000748 ! Fit after self-cal, rms=0.100963Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=15.95 mas, bpa=19.9 degrees ! Estimated noise=910.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617417 Jy ! Component: 100 - total flux cleaned = 0.000641396 Jy ! Component: 150 - total flux cleaned = 0.00064191 Jy ! Component: 200 - total flux cleaned = 0.000624381 Jy ! Total flux subtracted in 200 components = 0.000624381 Jy ! Clean residual min=-0.002485 max=0.001975 Jy/beam ! Clean residual mean=0.000006 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0743568 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0743568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100951Jy sigma=0.000747 ! Fit after self-cal, rms=0.100960Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.96033e-05 Jy ! Component: 100 - total flux cleaned = -6.48042e-06 Jy ! Component: 150 - total flux cleaned = -5.56336e-05 Jy ! Component: 200 - total flux cleaned = -7.02628e-05 Jy ! Total flux subtracted in 200 components = -7.02628e-05 Jy ! Clean residual min=-0.002481 max=0.001997 Jy/beam ! Clean residual mean=0.000006 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0742865 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0742865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100953Jy sigma=0.000747 ! Fit after self-cal, rms=0.100950Jy sigma=0.000747 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100950Jy sigma=0.000747 ! Fit after self-cal, rms=0.100682Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.997 mas, bmaj=25.55 mas, bpa=7.416 degrees ! Estimated noise=1019.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396777 Jy ! Component: 100 - total flux cleaned = 0.000456584 Jy ! Component: 150 - total flux cleaned = 0.000489606 Jy ! Component: 200 - total flux cleaned = 0.00048121 Jy ! Total flux subtracted in 200 components = 0.00048121 Jy ! Clean residual min=-0.002431 max=0.001825 Jy/beam ! Clean residual mean=0.000009 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0747677 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.0747677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100680Jy sigma=0.000747 ! Fit after self-cal, rms=0.100671Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28407e-05 Jy ! Component: 100 - total flux cleaned = -2.5354e-05 Jy ! Component: 150 - total flux cleaned = -3.25567e-05 Jy ! Component: 200 - total flux cleaned = -3.97041e-05 Jy ! Total flux subtracted in 200 components = -3.97041e-05 Jy ! Clean residual min=-0.002444 max=0.001821 Jy/beam ! Clean residual mean=0.000009 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.074728 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.074728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100669Jy sigma=0.000747 ! Fit after self-cal, rms=0.100666Jy sigma=0.000747 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=15.88 mas, bpa=19.91 degrees ! Estimated noise=911.003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 15.88 at 19.91 degrees (North through East) ! Clean map min=-0.0024158 max=0.068565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=13.83 mas, bpa=21.73 degrees ! Estimated noise=1531.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529793 Jy ! Component: 100 - total flux cleaned = 0.0650884 Jy ! Component: 150 - total flux cleaned = 0.0698284 Jy ! Component: 200 - total flux cleaned = 0.0724991 Jy ! Total flux subtracted in 200 components = 0.0724991 Jy ! Clean residual min=-0.003541 max=0.003610 Jy/beam ! Clean residual mean=-0.000001 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0724991 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0724991 Jy ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=15.88 mas, bpa=19.91 degrees ! Estimated noise=911.003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023465 Jy ! Component: 100 - total flux cleaned = 0.00274461 Jy ! Component: 150 - total flux cleaned = 0.00274669 Jy ! Component: 200 - total flux cleaned = 0.00274732 Jy ! Total flux subtracted in 200 components = 0.00274732 Jy ! Clean residual min=-0.002516 max=0.002098 Jy/beam ! Clean residual mean=0.000008 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0752464 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.0752464 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.997 mas, bmaj=25.55 mas, bpa=7.416 degrees ! Estimated noise=1019.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.69386e-05 Jy ! Component: 100 - total flux cleaned = -6.59342e-05 Jy ! Component: 150 - total flux cleaned = -4.54916e-05 Jy ! Component: 200 - total flux cleaned = -4.33421e-05 Jy ! Total flux subtracted in 200 components = -4.33421e-05 Jy ! Clean residual min=-0.002455 max=0.001881 Jy/beam ! Clean residual mean=0.000012 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0752031 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52667e-05 Jy ! Component: 100 - total flux cleaned = -1.49051e-05 Jy ! Component: 150 - total flux cleaned = -4.37839e-05 Jy ! Component: 200 - total flux cleaned = -7.06717e-05 Jy ! Total flux subtracted in 200 components = -7.06717e-05 Jy ! Clean residual min=-0.002445 max=0.001883 Jy/beam ! Clean residual mean=0.000011 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0751324 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0751324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=15.88 mas, bpa=19.91 degrees ! Estimated noise=911.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.82781e-05 Jy ! Component: 100 - total flux cleaned = 6.05075e-06 Jy ! Component: 150 - total flux cleaned = 6.42283e-06 Jy ! Component: 200 - total flux cleaned = -1.55038e-05 Jy ! Total flux subtracted in 200 components = -1.55038e-05 Jy ! Clean residual min=-0.002486 max=0.002072 Jy/beam ! Clean residual mean=0.000007 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0751169 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0751169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100676Jy sigma=0.000747 ! Fit after self-cal, rms=0.100695Jy sigma=0.000747 wmodel J2259-2920_S_2014_06_09_pus_map.mod ! Writing 55 model components to file: J2259-2920_S_2014_06_09_pus_map.mod wobs J2259-2920_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2259-2920_S_2014_06_09_pus_uvs.fits wwins J2259-2920_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J2259-2920_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111805 Jy ! Component: 100 - total flux cleaned = -0.00151709 Jy ! Component: 150 - total flux cleaned = -0.00169766 Jy ! Component: 200 - total flux cleaned = -0.0018361 Jy ! Component: 250 - total flux cleaned = -0.00196823 Jy ! Component: 300 - total flux cleaned = -0.00215907 Jy ! Component: 350 - total flux cleaned = -0.00231291 Jy ! Component: 400 - total flux cleaned = -0.00246078 Jy ! Component: 450 - total flux cleaned = -0.00260383 Jy ! Component: 500 - total flux cleaned = -0.00274281 Jy ! Component: 550 - total flux cleaned = -0.00290595 Jy ! Component: 600 - total flux cleaned = -0.0030389 Jy ! Component: 650 - total flux cleaned = -0.00324632 Jy ! Component: 700 - total flux cleaned = -0.00339795 Jy ! Component: 750 - total flux cleaned = -0.00342241 Jy ! Component: 800 - total flux cleaned = -0.0034712 Jy ! Component: 850 - total flux cleaned = -0.00351893 Jy ! Component: 900 - total flux cleaned = -0.00354222 Jy ! Component: 950 - total flux cleaned = -0.0034971 Jy ! Component: 1000 - total flux cleaned = -0.00347574 Jy ! Component: 1050 - total flux cleaned = -0.00356401 Jy ! Component: 1100 - total flux cleaned = -0.00358528 Jy ! Component: 1150 - total flux cleaned = -0.00358518 Jy ! Component: 1200 - total flux cleaned = -0.00360574 Jy ! Component: 1250 - total flux cleaned = -0.00352352 Jy ! Component: 1300 - total flux cleaned = -0.00344274 Jy ! Component: 1350 - total flux cleaned = -0.00332367 Jy ! Component: 1400 - total flux cleaned = -0.00326526 Jy ! Component: 1450 - total flux cleaned = -0.00322648 Jy ! Component: 1500 - total flux cleaned = -0.00311132 Jy ! Component: 1550 - total flux cleaned = -0.00303538 Jy ! Component: 1600 - total flux cleaned = -0.00294152 Jy ! Component: 1650 - total flux cleaned = -0.00281196 Jy ! Component: 1700 - total flux cleaned = -0.00268418 Jy ! Component: 1750 - total flux cleaned = -0.00261239 Jy ! Component: 1800 - total flux cleaned = -0.00252322 Jy ! Component: 1850 - total flux cleaned = -0.00245253 Jy ! Component: 1900 - total flux cleaned = -0.00226073 Jy ! Component: 1950 - total flux cleaned = -0.00219178 Jy ! Component: 2000 - total flux cleaned = -0.00210652 Jy ! Component: 2050 - total flux cleaned = -0.00205601 Jy ! Component: 2100 - total flux cleaned = -0.00195589 Jy ! Component: 2150 - total flux cleaned = -0.00192288 Jy ! Component: 2200 - total flux cleaned = -0.00182452 Jy ! Component: 2250 - total flux cleaned = -0.00179204 Jy ! Component: 2300 - total flux cleaned = -0.00177592 Jy ! Component: 2350 - total flux cleaned = -0.00174371 Jy ! Component: 2400 - total flux cleaned = -0.00163313 Jy ! Component: 2450 - total flux cleaned = -0.00158608 Jy ! Component: 2500 - total flux cleaned = -0.00152414 Jy ! Component: 2550 - total flux cleaned = -0.00149342 Jy ! Component: 2600 - total flux cleaned = -0.00147824 Jy ! Component: 2650 - total flux cleaned = -0.00141768 Jy ! Component: 2700 - total flux cleaned = -0.00135764 Jy ! Component: 2750 - total flux cleaned = -0.00131304 Jy ! Component: 2800 - total flux cleaned = -0.00129828 Jy ! Component: 2850 - total flux cleaned = -0.00121061 Jy ! Component: 2900 - total flux cleaned = -0.00119623 Jy ! Component: 2950 - total flux cleaned = -0.00113879 Jy ! Component: 3000 - total flux cleaned = -0.00109635 Jy ! Component: 3050 - total flux cleaned = -0.00106809 Jy ! Component: 3100 - total flux cleaned = -0.00102618 Jy ! Component: 3150 - total flux cleaned = -0.000970824 Jy ! Component: 3200 - total flux cleaned = -0.000943305 Jy ! Component: 3250 - total flux cleaned = -0.000943303 Jy ! Component: 3300 - total flux cleaned = -0.000943061 Jy ! Component: 3350 - total flux cleaned = -0.000862151 Jy ! Component: 3400 - total flux cleaned = -0.000822082 Jy ! Component: 3450 - total flux cleaned = -0.000742665 Jy ! Component: 3500 - total flux cleaned = -0.000755657 Jy ! Component: 3550 - total flux cleaned = -0.000664431 Jy ! Component: 3600 - total flux cleaned = -0.000651596 Jy ! Component: 3650 - total flux cleaned = -0.000574489 Jy ! Component: 3700 - total flux cleaned = -0.000523539 Jy ! Component: 3750 - total flux cleaned = -0.000460326 Jy ! Component: 3800 - total flux cleaned = -0.000422702 Jy ! Component: 3850 - total flux cleaned = -0.000385305 Jy ! Component: 3900 - total flux cleaned = -0.000397553 Jy ! Component: 3950 - total flux cleaned = -0.000274481 Jy ! Component: 4000 - total flux cleaned = -0.000274444 Jy ! Component: 4050 - total flux cleaned = -0.000153059 Jy ! Total flux subtracted in 4096 components = -0.000116965 Jy ! Clean residual min=-0.000672 max=0.000690 Jy/beam ! Clean residual mean=0.000003 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.075 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 308 components and 0.075 Jy ![Exited script file: muppet] wmap "J2259-2920_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 15.88 at 19.91 degrees (North through East) ! Clean map min=-0.0024471 max=0.066967 Jy/beam ! Writing clean map to FITS file: J2259-2920_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0669671 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233259 device "J2259-2920_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2259-2920_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04496 1.04496 2.08992 4.17983 8.35966 16.7193 33.4386 66.8773 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 15.88 at 19.91 degrees (North through East) ! Clean map min=-0.0024471 max=0.066967 Jy/beam quit ! Quitting program ! Log file J2259-2920_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:06:21 2016