! Started logfile: J2109-4110_S_2014_06_09_pus_uvs.log on Wed Nov 16 17:14:05 2016
obs J2109-4110_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J2109-4110_S_2014_06_09_pus_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.458333 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2109-4110
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 1320 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2109-4110_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.562620Jy  sigma=0.003308
! Fit after  self-cal, rms=0.560513Jy  sigma=0.003295
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.472 mas, bmaj=19.14 mas, bpa=-0.6112 degrees
! Estimated noise=4520.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.400831 Jy
! Component: 100  -  total flux cleaned = 0.582555 Jy
! Total flux subtracted in 100 components = 0.582555 Jy
! Clean residual min=-0.046319 max=0.096766 Jy/beam
! Clean residual mean=0.008614 rms=0.034923 Jy/beam
! Combined flux in latest and established models = 0.582555 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 59 components and 0.582555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.267649Jy  sigma=0.001869
! Fit after  self-cal, rms=0.267364Jy  sigma=0.001867
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.991 mas, bmaj=22.12 mas, bpa=-0.6438 degrees
! Estimated noise=3268.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161877 Jy
! Component: 100  -  total flux cleaned = 0.255403 Jy
! Component: 150  -  total flux cleaned = 0.311752 Jy
! Component: 200  -  total flux cleaned = 0.34746 Jy
! Total flux subtracted in 200 components = 0.34746 Jy
! Clean residual min=-0.018930 max=0.018959 Jy/beam
! Clean residual mean=0.001670 rms=0.009387 Jy/beam
! Combined flux in latest and established models = 0.930015 Jy
! Performing phase self-cal
! Adding 165 model components to the UV plane model.
! The established model now contains 218 components and 0.930015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159111Jy  sigma=0.000961
! Fit after  self-cal, rms=0.158921Jy  sigma=0.000959
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.83     HN        0.94     KP        1.00     
!   LA        1.13     MK        1.00*    NL        1.12     OV        1.00*    
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.28     KP        0.99     
!   LA        1.08     MK        1.00*    NL        1.07     OV        1.00*    
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        0.93     KP        0.90     
!   LA        0.87     MK        1.00*    NL        1.04     OV        1.00*    
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.98     HN        1.05     KP        0.86     
!   LA        0.86     MK        1.00*    NL        1.10     OV        1.00*    
!   PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.158921Jy  sigma=0.000959
! Fit after  self-cal, rms=0.140561Jy  sigma=0.000781
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=22.53 mas, bpa=-0.6945 degrees
! Estimated noise=3224.9 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00558471 Jy
! Component: 100  -  total flux cleaned = -0.0156205 Jy
! Component: 150  -  total flux cleaned = -0.0234203 Jy
! Component: 200  -  total flux cleaned = -0.0307501 Jy
! Total flux subtracted in 200 components = -0.0307501 Jy
! Clean residual min=-0.006077 max=0.006056 Jy/beam
! Clean residual mean=0.000068 rms=0.002632 Jy/beam
! Combined flux in latest and established models = 0.899265 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 269 components and 0.899265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136835Jy  sigma=0.000759
! Fit after  self-cal, rms=0.136880Jy  sigma=0.000759
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136880Jy  sigma=0.000759
! Fit after  self-cal, rms=0.136391Jy  sigma=0.000758
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=22.5 mas, bpa=-0.7254 degrees
! Estimated noise=3224.25 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019715 Jy
! Component: 100  -  total flux cleaned = 0.000412793 Jy
! Component: 150  -  total flux cleaned = -0.00283669 Jy
! Component: 200  -  total flux cleaned = -0.00640603 Jy
! Total flux subtracted in 200 components = -0.00640603 Jy
! Clean residual min=-0.003327 max=0.003315 Jy/beam
! Clean residual mean=0.000214 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.892859 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 312 components and 0.892859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135345Jy  sigma=0.000753
! Fit after  self-cal, rms=0.135336Jy  sigma=0.000753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228596 Jy
! Component: 100  -  total flux cleaned = 0.00312774 Jy
! Component: 150  -  total flux cleaned = 0.00283936 Jy
! Component: 200  -  total flux cleaned = 0.00217724 Jy
! Total flux subtracted in 200 components = 0.00217724 Jy
! Clean residual min=-0.002163 max=0.002165 Jy/beam
! Clean residual mean=0.000202 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.895036 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 360 components and 0.895036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134939Jy  sigma=0.000751
! Fit after  self-cal, rms=0.134930Jy  sigma=0.000751
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134930Jy  sigma=0.000751
! Fit after  self-cal, rms=0.135030Jy  sigma=0.000751
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.013 mas, bmaj=22.51 mas, bpa=-0.7216 degrees
! Estimated noise=3223.88 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.14743e-05 Jy
! Component: 100  -  total flux cleaned = -0.000825506 Jy
! Component: 150  -  total flux cleaned = -0.00223116 Jy
! Component: 200  -  total flux cleaned = -0.00364224 Jy
! Total flux subtracted in 200 components = -0.00364224 Jy
! Clean residual min=-0.001622 max=0.001609 Jy/beam
! Clean residual mean=0.000107 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.891394 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 395 components and 0.891394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134819Jy  sigma=0.000750
! Fit after  self-cal, rms=0.134813Jy  sigma=0.000750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131352 Jy
! Component: 100  -  total flux cleaned = 0.00210294 Jy
! Component: 150  -  total flux cleaned = 0.00298691 Jy
! Component: 200  -  total flux cleaned = 0.00380692 Jy
! Total flux subtracted in 200 components = 0.00380692 Jy
! Clean residual min=-0.001208 max=0.001203 Jy/beam
! Clean residual mean=0.000115 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.895201 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 432 components and 0.895201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134695Jy  sigma=0.000749
! Fit after  self-cal, rms=0.134689Jy  sigma=0.000749
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134689Jy  sigma=0.000749
! Fit after  self-cal, rms=0.134685Jy  sigma=0.000749
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.204 mas, bmaj=28.54 mas, bpa=-8.414 degrees
! Estimated noise=3666.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114805 Jy
! Component: 100  -  total flux cleaned = 0.00276741 Jy
! Component: 150  -  total flux cleaned = 0.00442545 Jy
! Component: 200  -  total flux cleaned = 0.00610586 Jy
! Total flux subtracted in 200 components = 0.00610586 Jy
! Clean residual min=-0.001049 max=0.001135 Jy/beam
! Clean residual mean=0.000155 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.901307 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 479 components and 0.901307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134633Jy  sigma=0.000749
! Fit after  self-cal, rms=0.134632Jy  sigma=0.000749
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109629 Jy
! Component: 100  -  total flux cleaned = 2.44684e-05 Jy
! Component: 150  -  total flux cleaned = -0.000509825 Jy
! Component: 200  -  total flux cleaned = -0.000765975 Jy
! Total flux subtracted in 200 components = -0.000765975 Jy
! Clean residual min=-0.000701 max=0.000697 Jy/beam
! Clean residual mean=0.000063 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.900541 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 509 components and 0.900541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134593Jy  sigma=0.000749
! Fit after  self-cal, rms=0.134595Jy  sigma=0.000749
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=22.51 mas, bpa=-0.7178 degrees
! Estimated noise=3223 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.012 x 22.51 at -0.7178 degrees (North through East)
! Clean map  min=-0.01111  max=0.36454 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=19.35 mas, bpa=-0.7387 degrees
! Estimated noise=4385.16 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.387473 Jy
! Component: 100  -  total flux cleaned = 0.558825 Jy
! Component: 150  -  total flux cleaned = 0.668625 Jy
! Component: 200  -  total flux cleaned = 0.743934 Jy
! Total flux subtracted in 200 components = 0.743934 Jy
! Clean residual min=-0.022218 max=0.041681 Jy/beam
! Clean residual mean=0.004379 rms=0.015337 Jy/beam
! Combined flux in latest and established models = 0.743934 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 121 model components to the UV plane model.
! The established model now contains 121 components and 0.743934 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=22.51 mas, bpa=-0.7178 degrees
! Estimated noise=3223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0747825 Jy
! Component: 100  -  total flux cleaned = 0.118677 Jy
! Component: 150  -  total flux cleaned = 0.146539 Jy
! Component: 200  -  total flux cleaned = 0.15773 Jy
! Total flux subtracted in 200 components = 0.15773 Jy
! Clean residual min=-0.010653 max=0.010754 Jy/beam
! Clean residual mean=0.001201 rms=0.005246 Jy/beam
! Combined flux in latest and established models = 0.901664 Jy
! Adding 154 model components to the UV plane model.
! The established model now contains 260 components and 0.901664 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.204 mas, bmaj=28.54 mas, bpa=-8.414 degrees
! Estimated noise=3666.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144658 Jy
! Component: 100  -  total flux cleaned = 0.015229 Jy
! Component: 150  -  total flux cleaned = 0.0110916 Jy
! Component: 200  -  total flux cleaned = 0.0023981 Jy
! Total flux subtracted in 200 components = 0.0023981 Jy
! Clean residual min=-0.006256 max=0.006150 Jy/beam
! Clean residual mean=0.000842 rms=0.003031 Jy/beam
! Combined flux in latest and established models = 0.904062 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0079661 Jy
! Component: 100  -  total flux cleaned = -0.0160339 Jy
! Component: 150  -  total flux cleaned = -0.0239443 Jy
! Component: 200  -  total flux cleaned = -0.0315779 Jy
! Total flux subtracted in 200 components = -0.0315779 Jy
! Clean residual min=-0.005142 max=0.004674 Jy/beam
! Clean residual mean=0.000564 rms=0.001982 Jy/beam
! Combined flux in latest and established models = 0.872484 Jy
! Adding 102 model components to the UV plane model.
! The established model now contains 356 components and 0.872484 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=22.51 mas, bpa=-0.7178 degrees
! Estimated noise=3223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420787 Jy
! Component: 100  -  total flux cleaned = 0.00674928 Jy
! Component: 150  -  total flux cleaned = 0.00912287 Jy
! Component: 200  -  total flux cleaned = 0.0106328 Jy
! Total flux subtracted in 200 components = 0.0106328 Jy
! Clean residual min=-0.002385 max=0.002394 Jy/beam
! Clean residual mean=0.000368 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.883117 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 405 components and 0.883116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135073Jy  sigma=0.000752
! Fit after  self-cal, rms=0.134981Jy  sigma=0.000752
wmodel J2109-4110_S_2014_06_09_pus_map.mod
! Writing 405 model components to file: J2109-4110_S_2014_06_09_pus_map.mod
wobs J2109-4110_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J2109-4110_S_2014_06_09_pus_uvs.fits
wwins J2109-4110_S_2014_06_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J2109-4110_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.012 x 22.51 at -0.7178 degrees (North through East)
! Clean map  min=-0.01303  max=0.36512 Jy/beam
! Writing clean map to FITS file: J2109-4110_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.36512 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000916325 
device "J2109-4110_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J2109-4110_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.752897 0.752897 1.50579 3.01159 6.02317 12.0463 24.0927 48.1854 96.3708
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0027 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.365 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.012 x 22.51 at -0.7178 degrees (North through East)
! Clean map  min=-0.01303  max=0.36512 Jy/beam
quit
! Quitting program
! Log file J2109-4110_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 17:14:06 2016