! Started logfile: J1936+0142_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:02:44 2016 obs J1936+0142_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1936+0142_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693443 visibilities/baseline/integration-bin. ! Found source: J1936+0142 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1936+0142_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900981Jy sigma=0.010507 ! Fit after self-cal, rms=0.800981Jy sigma=0.009375 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.697 mas, bpa=-1.485 degrees ! Estimated noise=698.448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150351 Jy ! Component: 100 - total flux cleaned = 0.192315 Jy ! Total flux subtracted in 100 components = 0.192315 Jy ! Clean residual min=-0.009600 max=0.018374 Jy/beam ! Clean residual mean=0.000018 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 0.192315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.192315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083472Jy sigma=0.000916 ! Fit after self-cal, rms=0.083472Jy sigma=0.000915 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199521 Jy ! Component: 100 - total flux cleaned = 0.0306681 Jy ! Total flux subtracted in 100 components = 0.0306681 Jy ! Clean residual min=-0.005365 max=0.012488 Jy/beam ! Clean residual mean=0.000012 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.222983 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.222983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077537Jy sigma=0.000844 ! Fit after self-cal, rms=0.077541Jy sigma=0.000844 ! Inverting map ! Added new window around map position (-8, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106881 Jy ! Component: 100 - total flux cleaned = 0.0163978 Jy ! Total flux subtracted in 100 components = 0.0163978 Jy ! Clean residual min=-0.004979 max=0.004346 Jy/beam ! Clean residual mean=0.000008 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.23938 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.239381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075880Jy sigma=0.000826 ! Fit after self-cal, rms=0.075813Jy sigma=0.000825 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=8.907 mas, bpa=-1.061 degrees ! Estimated noise=496.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484599 Jy ! Component: 100 - total flux cleaned = 0.00782135 Jy ! Component: 150 - total flux cleaned = 0.00983506 Jy ! Component: 200 - total flux cleaned = 0.011284 Jy ! Total flux subtracted in 200 components = 0.011284 Jy ! Clean residual min=-0.003619 max=0.003285 Jy/beam ! Clean residual mean=0.000007 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.250664 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 83 components and 0.250664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075364Jy sigma=0.000822 ! Fit after self-cal, rms=0.075354Jy sigma=0.000822 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.94 KP 1.03 ! LA 1.16 MK 1.06 NL 1.02 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.99 KP 1.01 ! LA 1.11 MK 1.07 NL 1.06 OV 1.02 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 0.99 KP 0.90 ! LA 0.88 MK 1.07 NL 1.00 OV 0.95 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 0.88 ! LA 0.87 MK 1.06 NL 1.04 OV 1.04 ! PT 1.02 SC 0.98 ! ! ! Fit before self-cal, rms=0.075354Jy sigma=0.000822 ! Fit after self-cal, rms=0.071772Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=8.962 mas, bpa=-0.8236 degrees ! Estimated noise=497.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400819 Jy ! Component: 100 - total flux cleaned = 0.000116857 Jy ! Component: 150 - total flux cleaned = 6.51899e-05 Jy ! Component: 200 - total flux cleaned = 1.83004e-05 Jy ! Total flux subtracted in 200 components = 1.83004e-05 Jy ! Clean residual min=-0.001907 max=0.001957 Jy/beam ! Clean residual mean=0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.250683 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.250683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071741Jy sigma=0.000783 ! Fit after self-cal, rms=0.071749Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071749Jy sigma=0.000782 ! Fit after self-cal, rms=0.071568Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.97 mas, bpa=-0.7464 degrees ! Estimated noise=497.359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161193 Jy ! Component: 100 - total flux cleaned = -0.000292233 Jy ! Component: 150 - total flux cleaned = -0.000360137 Jy ! Component: 200 - total flux cleaned = -0.000421401 Jy ! Total flux subtracted in 200 components = -0.000421401 Jy ! Clean residual min=-0.001620 max=0.001719 Jy/beam ! Clean residual mean=0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.250261 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.250261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071550Jy sigma=0.000779 ! Fit after self-cal, rms=0.071552Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766734 Jy ! Component: 100 - total flux cleaned = 0.000733793 Jy ! Component: 150 - total flux cleaned = 0.000673423 Jy ! Component: 200 - total flux cleaned = 0.000697948 Jy ! Total flux subtracted in 200 components = 0.000697948 Jy ! Clean residual min=-0.001361 max=0.001415 Jy/beam ! Clean residual mean=0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.250959 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 124 components and 0.250959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071508Jy sigma=0.000779 ! Fit after self-cal, rms=0.071508Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071508Jy sigma=0.000779 ! Fit after self-cal, rms=0.071422Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=8.971 mas, bpa=-0.7217 degrees ! Estimated noise=496.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30845e-05 Jy ! Component: 100 - total flux cleaned = -0.00011724 Jy ! Component: 150 - total flux cleaned = -0.000211783 Jy ! Component: 200 - total flux cleaned = -0.000298394 Jy ! Total flux subtracted in 200 components = -0.000298394 Jy ! Clean residual min=-0.001263 max=0.001375 Jy/beam ! Clean residual mean=0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.250661 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.250661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071410Jy sigma=0.000779 ! Fit after self-cal, rms=0.071410Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70555e-07 Jy ! Component: 100 - total flux cleaned = -6.17337e-05 Jy ! Component: 150 - total flux cleaned = -0.000105288 Jy ! Component: 200 - total flux cleaned = -0.000146962 Jy ! Total flux subtracted in 200 components = -0.000146962 Jy ! Clean residual min=-0.001236 max=0.001373 Jy/beam ! Clean residual mean=0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.250514 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.250514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071404Jy sigma=0.000779 ! Fit after self-cal, rms=0.071404Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071404Jy sigma=0.000779 ! Fit after self-cal, rms=0.071377Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.64 mas, bmaj=15.26 mas, bpa=-7.989 degrees ! Estimated noise=584.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623861 Jy ! Component: 100 - total flux cleaned = -0.00081286 Jy ! Component: 150 - total flux cleaned = -0.00090468 Jy ! Component: 200 - total flux cleaned = -0.000974363 Jy ! Total flux subtracted in 200 components = -0.000974363 Jy ! Clean residual min=-0.001080 max=0.001272 Jy/beam ! Clean residual mean=0.000004 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.24954 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 155 components and 0.24954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071375Jy sigma=0.000778 ! Fit after self-cal, rms=0.071373Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181568 Jy ! Component: 100 - total flux cleaned = -0.000221171 Jy ! Component: 150 - total flux cleaned = -0.000256964 Jy ! Component: 200 - total flux cleaned = -0.000256839 Jy ! Total flux subtracted in 200 components = -0.000256839 Jy ! Clean residual min=-0.001093 max=0.001259 Jy/beam ! Clean residual mean=0.000004 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.249283 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 162 components and 0.249283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071373Jy sigma=0.000778 ! Fit after self-cal, rms=0.071373Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=8.972 mas, bpa=-0.7159 degrees ! Estimated noise=496.356 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 8.972 at -0.7159 degrees (North through East) ! Clean map min=-0.0016464 max=0.20032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.736 mas, bpa=-1.105 degrees ! Estimated noise=699.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150365 Jy ! Component: 100 - total flux cleaned = 0.191338 Jy ! Component: 150 - total flux cleaned = 0.211278 Jy ! Component: 200 - total flux cleaned = 0.223659 Jy ! Total flux subtracted in 200 components = 0.223659 Jy ! Clean residual min=-0.004041 max=0.008091 Jy/beam ! Clean residual mean=0.000007 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.223659 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.223659 Jy ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=8.972 mas, bpa=-0.7159 degrees ! Estimated noise=496.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103072 Jy ! Component: 100 - total flux cleaned = 0.0160469 Jy ! Component: 150 - total flux cleaned = 0.0196876 Jy ! Component: 200 - total flux cleaned = 0.0220962 Jy ! Total flux subtracted in 200 components = 0.0220962 Jy ! Clean residual min=-0.001653 max=0.001798 Jy/beam ! Clean residual mean=0.000004 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.245755 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 57 components and 0.245755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.64 mas, bmaj=15.26 mas, bpa=-7.989 degrees ! Estimated noise=584.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021141 Jy ! Component: 100 - total flux cleaned = 0.00304555 Jy ! Component: 150 - total flux cleaned = 0.00319386 Jy ! Component: 200 - total flux cleaned = 0.00321904 Jy ! Total flux subtracted in 200 components = 0.00321904 Jy ! Clean residual min=-0.001342 max=0.001365 Jy/beam ! Clean residual mean=0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.248974 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20083e-05 Jy ! Component: 100 - total flux cleaned = 1.9452e-05 Jy ! Component: 150 - total flux cleaned = 2.01561e-05 Jy ! Component: 200 - total flux cleaned = 7.36649e-05 Jy ! Total flux subtracted in 200 components = 7.36649e-05 Jy ! Clean residual min=-0.001285 max=0.001309 Jy/beam ! Clean residual mean=0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.249048 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 91 components and 0.249048 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=8.972 mas, bpa=-0.7159 degrees ! Estimated noise=496.356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341997 Jy ! Component: 100 - total flux cleaned = 0.00050961 Jy ! Component: 150 - total flux cleaned = 0.000732952 Jy ! Component: 200 - total flux cleaned = 0.00076653 Jy ! Total flux subtracted in 200 components = 0.00076653 Jy ! Clean residual min=-0.001209 max=0.001306 Jy/beam ! Clean residual mean=0.000002 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.249815 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.249814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071417Jy sigma=0.000779 ! Fit after self-cal, rms=0.071409Jy sigma=0.000779 wmodel J1936+0142_S_2014_06_09_pus_map.mod ! Writing 108 model components to file: J1936+0142_S_2014_06_09_pus_map.mod wobs J1936+0142_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1936+0142_S_2014_06_09_pus_uvs.fits wwins J1936+0142_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J1936+0142_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485732 Jy ! Component: 100 - total flux cleaned = 0.000845014 Jy ! Component: 150 - total flux cleaned = 0.00112179 Jy ! Component: 200 - total flux cleaned = 0.001326 Jy ! Component: 250 - total flux cleaned = 0.00148368 Jy ! Component: 300 - total flux cleaned = 0.0016937 Jy ! Component: 350 - total flux cleaned = 0.00189711 Jy ! Component: 400 - total flux cleaned = 0.00207732 Jy ! Component: 450 - total flux cleaned = 0.00220061 Jy ! Component: 500 - total flux cleaned = 0.00237307 Jy ! Component: 550 - total flux cleaned = 0.00250798 Jy ! Component: 600 - total flux cleaned = 0.00262388 Jy ! Component: 650 - total flux cleaned = 0.00273759 Jy ! Component: 700 - total flux cleaned = 0.00284929 Jy ! Component: 750 - total flux cleaned = 0.00294302 Jy ! Component: 800 - total flux cleaned = 0.00305008 Jy ! Component: 850 - total flux cleaned = 0.00317005 Jy ! Component: 900 - total flux cleaned = 0.00325836 Jy ! Component: 950 - total flux cleaned = 0.00338866 Jy ! Component: 1000 - total flux cleaned = 0.00345993 Jy ! Component: 1050 - total flux cleaned = 0.00357206 Jy ! Component: 1100 - total flux cleaned = 0.00364089 Jy ! Component: 1150 - total flux cleaned = 0.00368173 Jy ! Component: 1200 - total flux cleaned = 0.00377557 Jy ! Component: 1250 - total flux cleaned = 0.0038283 Jy ! Component: 1300 - total flux cleaned = 0.00391925 Jy ! Component: 1350 - total flux cleaned = 0.00397043 Jy ! Component: 1400 - total flux cleaned = 0.00402106 Jy ! Component: 1450 - total flux cleaned = 0.00412098 Jy ! Component: 1500 - total flux cleaned = 0.00419464 Jy ! Component: 1550 - total flux cleaned = 0.00420667 Jy ! Component: 1600 - total flux cleaned = 0.00427874 Jy ! Component: 1650 - total flux cleaned = 0.00432625 Jy ! Component: 1700 - total flux cleaned = 0.0043377 Jy ! Component: 1750 - total flux cleaned = 0.00437265 Jy ! Component: 1800 - total flux cleaned = 0.00444154 Jy ! Component: 1850 - total flux cleaned = 0.00443015 Jy ! Component: 1900 - total flux cleaned = 0.00451996 Jy ! Component: 1950 - total flux cleaned = 0.00453108 Jy ! Component: 2000 - total flux cleaned = 0.00459716 Jy ! Component: 2050 - total flux cleaned = 0.00460809 Jy ! Component: 2100 - total flux cleaned = 0.00466202 Jy ! Component: 2150 - total flux cleaned = 0.004726 Jy ! Component: 2200 - total flux cleaned = 0.00474685 Jy ! Component: 2250 - total flux cleaned = 0.00480952 Jy ! Component: 2300 - total flux cleaned = 0.00479924 Jy ! Component: 2350 - total flux cleaned = 0.00480959 Jy ! Component: 2400 - total flux cleaned = 0.00489099 Jy ! Component: 2450 - total flux cleaned = 0.00492115 Jy ! Component: 2500 - total flux cleaned = 0.00499117 Jy ! Component: 2550 - total flux cleaned = 0.0050406 Jy ! Component: 2600 - total flux cleaned = 0.0050895 Jy ! Component: 2650 - total flux cleaned = 0.00509907 Jy ! Component: 2700 - total flux cleaned = 0.00514719 Jy ! Component: 2750 - total flux cleaned = 0.00519491 Jy ! Component: 2800 - total flux cleaned = 0.00520433 Jy ! Component: 2850 - total flux cleaned = 0.005242 Jy ! Component: 2900 - total flux cleaned = 0.0052977 Jy ! Component: 2950 - total flux cleaned = 0.00530683 Jy ! Component: 3000 - total flux cleaned = 0.00534324 Jy ! Component: 3050 - total flux cleaned = 0.00534317 Jy ! Component: 3100 - total flux cleaned = 0.0053701 Jy ! Component: 3150 - total flux cleaned = 0.00539679 Jy ! Component: 3200 - total flux cleaned = 0.00542336 Jy ! Component: 3250 - total flux cleaned = 0.00543212 Jy ! Component: 3300 - total flux cleaned = 0.00542351 Jy ! Component: 3350 - total flux cleaned = 0.00543226 Jy ! Component: 3400 - total flux cleaned = 0.00545809 Jy ! Component: 3450 - total flux cleaned = 0.00549216 Jy ! Component: 3500 - total flux cleaned = 0.0054921 Jy ! Component: 3550 - total flux cleaned = 0.00550889 Jy ! Component: 3600 - total flux cleaned = 0.00555891 Jy ! Component: 3650 - total flux cleaned = 0.00557547 Jy ! Component: 3700 - total flux cleaned = 0.00559192 Jy ! Component: 3750 - total flux cleaned = 0.00560822 Jy ! Component: 3800 - total flux cleaned = 0.0056244 Jy ! Component: 3850 - total flux cleaned = 0.00566471 Jy ! Component: 3900 - total flux cleaned = 0.00567271 Jy ! Component: 3950 - total flux cleaned = 0.00568065 Jy ! Component: 4000 - total flux cleaned = 0.00572805 Jy ! Component: 4050 - total flux cleaned = 0.00572016 Jy ! Total flux subtracted in 4096 components = 0.00573571 Jy ! Clean residual min=-0.000563 max=0.000442 Jy/beam ! Clean residual mean=0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.25555 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 386 components and 0.25555 Jy ![Exited script file: muppet] wmap "J1936+0142_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 8.972 at -0.7159 degrees (North through East) ! Clean map min=-0.00085125 max=0.19955 Jy/beam ! Writing clean map to FITS file: J1936+0142_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.199548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144127 device "J1936+0142_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1936+0142_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.216681 0.216681 0.433362 0.866724 1.73345 3.4669 6.93379 13.8676 27.7352 55.4704 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.199 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 8.972 at -0.7159 degrees (North through East) ! Clean map min=-0.00085125 max=0.19955 Jy/beam quit ! Quitting program ! Log file J1936+0142_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:02:49 2016