! Started logfile: J1926+4209_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:02:28 2016 obs J1926+4209_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1926+4209_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698543 visibilities/baseline/integration-bin. ! Found source: J1926+4209 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1926+4209_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953633Jy sigma=0.011886 ! Fit after self-cal, rms=0.938224Jy sigma=0.011707 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=6.617 mas, bpa=22.73 degrees ! Estimated noise=832.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474857 Jy ! Component: 100 - total flux cleaned = 0.0591472 Jy ! Total flux subtracted in 100 components = 0.0591472 Jy ! Clean residual min=-0.003551 max=0.004583 Jy/beam ! Clean residual mean=0.000001 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.0591472 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0591472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068225Jy sigma=0.000778 ! Fit after self-cal, rms=0.068210Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.149 mas, bmaj=7.386 mas, bpa=20.81 degrees ! Estimated noise=466.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593325 Jy ! Component: 100 - total flux cleaned = 0.00835891 Jy ! Component: 150 - total flux cleaned = 0.0096899 Jy ! Component: 200 - total flux cleaned = 0.0100745 Jy ! Total flux subtracted in 200 components = 0.0100745 Jy ! Clean residual min=-0.001489 max=0.001754 Jy/beam ! Clean residual mean=0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0692217 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.0692217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067700Jy sigma=0.000772 ! Fit after self-cal, rms=0.067718Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00 KP 1.05 ! LA 1.17 MK 1.20 NL 0.95 OV 0.98 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.01 KP 1.03 ! LA 1.09 MK 1.18 NL 1.02 OV 1.02 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.02 KP 0.91 ! LA 0.91 MK 1.12 NL 1.03 OV 0.97 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.97 KP 0.86 ! LA 0.90 MK 1.07 NL 1.03 OV 0.96 ! PT 1.04 SC 0.95 ! ! ! Fit before self-cal, rms=0.067718Jy sigma=0.000772 ! Fit after self-cal, rms=0.066298Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.184 mas, bmaj=7.318 mas, bpa=20.89 degrees ! Estimated noise=464.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.56166e-05 Jy ! Component: 100 - total flux cleaned = 6.01212e-06 Jy ! Component: 150 - total flux cleaned = -1.22312e-05 Jy ! Component: 200 - total flux cleaned = -2.688e-05 Jy ! Total flux subtracted in 200 components = -2.688e-05 Jy ! Clean residual min=-0.001191 max=0.001529 Jy/beam ! Clean residual mean=-0.000000 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0691948 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0691948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066285Jy sigma=0.000768 ! Fit after self-cal, rms=0.066271Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066271Jy sigma=0.000767 ! Fit after self-cal, rms=0.066309Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.195 mas, bmaj=7.322 mas, bpa=20.74 degrees ! Estimated noise=464.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.47129e-05 Jy ! Component: 100 - total flux cleaned = 2.70736e-05 Jy ! Component: 150 - total flux cleaned = 1.57742e-05 Jy ! Component: 200 - total flux cleaned = 2.49321e-05 Jy ! Total flux subtracted in 200 components = 2.49321e-05 Jy ! Clean residual min=-0.001151 max=0.001453 Jy/beam ! Clean residual mean=0.000000 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.0692198 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.0692198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066303Jy sigma=0.000767 ! Fit after self-cal, rms=0.066305Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, 81). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930338 Jy ! Component: 100 - total flux cleaned = 0.000958641 Jy ! Component: 150 - total flux cleaned = 0.000912336 Jy ! Component: 200 - total flux cleaned = 0.000891432 Jy ! Total flux subtracted in 200 components = 0.000891432 Jy ! Clean residual min=-0.001059 max=0.001040 Jy/beam ! Clean residual mean=0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.0701112 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0701112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066275Jy sigma=0.000766 ! Fit after self-cal, rms=0.066275Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066275Jy sigma=0.000766 ! Fit after self-cal, rms=0.066269Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.204 mas, bmaj=7.317 mas, bpa=20.6 degrees ! Estimated noise=464.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409653 Jy ! Component: 100 - total flux cleaned = 0.000448741 Jy ! Component: 150 - total flux cleaned = 0.000497898 Jy ! Component: 200 - total flux cleaned = 0.000498542 Jy ! Total flux subtracted in 200 components = 0.000498542 Jy ! Clean residual min=-0.001057 max=0.001034 Jy/beam ! Clean residual mean=0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0706097 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0706097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066258Jy sigma=0.000766 ! Fit after self-cal, rms=0.066259Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121623 Jy ! Component: 100 - total flux cleaned = 0.000120952 Jy ! Component: 150 - total flux cleaned = 0.000132744 Jy ! Component: 200 - total flux cleaned = 0.000120801 Jy ! Total flux subtracted in 200 components = 0.000120801 Jy ! Clean residual min=-0.001042 max=0.001042 Jy/beam ! Clean residual mean=0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0707305 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.0707305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066254Jy sigma=0.000766 ! Fit after self-cal, rms=0.066254Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066254Jy sigma=0.000766 ! Fit after self-cal, rms=0.066255Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.145 mas, bmaj=10.21 mas, bpa=-7.979 degrees ! Estimated noise=534.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143007 Jy ! Component: 100 - total flux cleaned = 0.000209734 Jy ! Component: 150 - total flux cleaned = 0.000268008 Jy ! Component: 200 - total flux cleaned = 0.00030248 Jy ! Total flux subtracted in 200 components = 0.00030248 Jy ! Clean residual min=-0.000913 max=0.000805 Jy/beam ! Clean residual mean=0.000002 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.071033 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.071033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066254Jy sigma=0.000766 ! Fit after self-cal, rms=0.066254Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.38545e-05 Jy ! Component: 100 - total flux cleaned = 5.77867e-05 Jy ! Component: 150 - total flux cleaned = 6.4886e-05 Jy ! Component: 200 - total flux cleaned = 6.50684e-05 Jy ! Total flux subtracted in 200 components = 6.50684e-05 Jy ! Clean residual min=-0.000909 max=0.000792 Jy/beam ! Clean residual mean=0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0710981 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.0710981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066253Jy sigma=0.000766 ! Fit after self-cal, rms=0.066254Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=7.313 mas, bpa=20.51 degrees ! Estimated noise=464.369 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.209 x 7.313 at 20.51 degrees (North through East) ! Clean map min=-0.00098318 max=0.063259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=6.538 mas, bpa=22.46 degrees ! Estimated noise=832.201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472608 Jy ! Component: 100 - total flux cleaned = 0.0586703 Jy ! Component: 150 - total flux cleaned = 0.0633619 Jy ! Component: 200 - total flux cleaned = 0.0657101 Jy ! Total flux subtracted in 200 components = 0.0657101 Jy ! Clean residual min=-0.002629 max=0.002473 Jy/beam ! Clean residual mean=-0.000001 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0657101 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0657101 Jy ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=7.313 mas, bpa=20.51 degrees ! Estimated noise=464.369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262868 Jy ! Component: 100 - total flux cleaned = 0.00346155 Jy ! Component: 150 - total flux cleaned = 0.00388764 Jy ! Component: 200 - total flux cleaned = 0.00423056 Jy ! Total flux subtracted in 200 components = 0.00423056 Jy ! Clean residual min=-0.001201 max=0.001033 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0699407 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.0699407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.145 mas, bmaj=10.21 mas, bpa=-7.979 degrees ! Estimated noise=534.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479002 Jy ! Component: 100 - total flux cleaned = 0.000621695 Jy ! Component: 150 - total flux cleaned = 0.000698255 Jy ! Component: 200 - total flux cleaned = 0.000746894 Jy ! Total flux subtracted in 200 components = 0.000746894 Jy ! Clean residual min=-0.000974 max=0.000866 Jy/beam ! Clean residual mean=0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0706876 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.04955e-05 Jy ! Component: 100 - total flux cleaned = 0.000120405 Jy ! Component: 150 - total flux cleaned = 0.000165295 Jy ! Component: 200 - total flux cleaned = 0.000195823 Jy ! Total flux subtracted in 200 components = 0.000195823 Jy ! Clean residual min=-0.000949 max=0.000842 Jy/beam ! Clean residual mean=0.000002 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0708834 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 70 components and 0.0708834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=7.313 mas, bpa=20.51 degrees ! Estimated noise=464.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.35227e-05 Jy ! Component: 100 - total flux cleaned = 2.25557e-05 Jy ! Component: 150 - total flux cleaned = 4.10047e-05 Jy ! Component: 200 - total flux cleaned = 2.41828e-05 Jy ! Total flux subtracted in 200 components = 2.41828e-05 Jy ! Clean residual min=-0.001057 max=0.001005 Jy/beam ! Clean residual mean=0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0709076 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.0709076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066262Jy sigma=0.000766 ! Fit after self-cal, rms=0.066259Jy sigma=0.000766 wmodel J1926+4209_S_2014_06_09_pus_map.mod ! Writing 85 model components to file: J1926+4209_S_2014_06_09_pus_map.mod wobs J1926+4209_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1926+4209_S_2014_06_09_pus_uvs.fits wwins J1926+4209_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J1926+4209_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.05081e-05 Jy ! Component: 100 - total flux cleaned = -5.54703e-05 Jy ! Component: 150 - total flux cleaned = -7.19247e-05 Jy ! Component: 200 - total flux cleaned = -8.8043e-05 Jy ! Component: 250 - total flux cleaned = -8.7749e-05 Jy ! Component: 300 - total flux cleaned = -5.63483e-05 Jy ! Component: 350 - total flux cleaned = -1.08133e-05 Jy ! Component: 400 - total flux cleaned = 1.87839e-05 Jy ! Component: 450 - total flux cleaned = 4.23375e-06 Jy ! Component: 500 - total flux cleaned = -2.40073e-05 Jy ! Component: 550 - total flux cleaned = -3.80588e-05 Jy ! Component: 600 - total flux cleaned = -9.27606e-05 Jy ! Component: 650 - total flux cleaned = -9.2387e-05 Jy ! Component: 700 - total flux cleaned = -0.000105589 Jy ! Component: 750 - total flux cleaned = -0.000105793 Jy ! Component: 800 - total flux cleaned = -0.000131587 Jy ! Component: 850 - total flux cleaned = -0.000118996 Jy ! Component: 900 - total flux cleaned = -0.000144286 Jy ! Component: 950 - total flux cleaned = -0.000144489 Jy ! Component: 1000 - total flux cleaned = -0.000144455 Jy ! Component: 1050 - total flux cleaned = -0.000108643 Jy ! Component: 1100 - total flux cleaned = -0.000132519 Jy ! Component: 1150 - total flux cleaned = -0.000120786 Jy ! Component: 1200 - total flux cleaned = -0.000143897 Jy ! Component: 1250 - total flux cleaned = -0.000132554 Jy ! Component: 1300 - total flux cleaned = -0.000144014 Jy ! Component: 1350 - total flux cleaned = -0.000143977 Jy ! Component: 1400 - total flux cleaned = -0.000155035 Jy ! Component: 1450 - total flux cleaned = -0.00016586 Jy ! Component: 1500 - total flux cleaned = -0.000155042 Jy ! Component: 1550 - total flux cleaned = -0.000187176 Jy ! Component: 1600 - total flux cleaned = -0.000187308 Jy ! Component: 1650 - total flux cleaned = -0.000218778 Jy ! Component: 1700 - total flux cleaned = -0.00024983 Jy ! Component: 1750 - total flux cleaned = -0.000270301 Jy ! Component: 1800 - total flux cleaned = -0.000270308 Jy ! Component: 1850 - total flux cleaned = -0.000290522 Jy ! Component: 1900 - total flux cleaned = -0.000340278 Jy ! Component: 1950 - total flux cleaned = -0.000350116 Jy ! Component: 2000 - total flux cleaned = -0.000330472 Jy ! Component: 2050 - total flux cleaned = -0.000349994 Jy ! Component: 2100 - total flux cleaned = -0.000369443 Jy ! Component: 2150 - total flux cleaned = -0.000350472 Jy ! Component: 2200 - total flux cleaned = -0.000359934 Jy ! Component: 2250 - total flux cleaned = -0.000331785 Jy ! Component: 2300 - total flux cleaned = -0.00032251 Jy ! Component: 2350 - total flux cleaned = -0.000322483 Jy ! Component: 2400 - total flux cleaned = -0.000294989 Jy ! Component: 2450 - total flux cleaned = -0.000304187 Jy ! Component: 2500 - total flux cleaned = -0.000322191 Jy ! Component: 2550 - total flux cleaned = -0.000313147 Jy ! Component: 2600 - total flux cleaned = -0.000339893 Jy ! Component: 2650 - total flux cleaned = -0.000348723 Jy ! Component: 2700 - total flux cleaned = -0.000340049 Jy ! Component: 2750 - total flux cleaned = -0.000409698 Jy ! Component: 2800 - total flux cleaned = -0.000409521 Jy ! Component: 2850 - total flux cleaned = -0.000426717 Jy ! Component: 2900 - total flux cleaned = -0.000435202 Jy ! Component: 2950 - total flux cleaned = -0.000469068 Jy ! Component: 3000 - total flux cleaned = -0.000469041 Jy ! Component: 3050 - total flux cleaned = -0.000502521 Jy ! Component: 3100 - total flux cleaned = -0.000535705 Jy ! Component: 3150 - total flux cleaned = -0.000552219 Jy ! Component: 3200 - total flux cleaned = -0.000585055 Jy ! Component: 3250 - total flux cleaned = -0.000601318 Jy ! Component: 3300 - total flux cleaned = -0.000617478 Jy ! Component: 3350 - total flux cleaned = -0.000657693 Jy ! Component: 3400 - total flux cleaned = -0.00064168 Jy ! Component: 3450 - total flux cleaned = -0.000665673 Jy ! Component: 3500 - total flux cleaned = -0.000665719 Jy ! Component: 3550 - total flux cleaned = -0.000681479 Jy ! Component: 3600 - total flux cleaned = -0.000720538 Jy ! Component: 3650 - total flux cleaned = -0.000712791 Jy ! Component: 3700 - total flux cleaned = -0.000759153 Jy ! Component: 3750 - total flux cleaned = -0.000766794 Jy ! Component: 3800 - total flux cleaned = -0.000774455 Jy ! Component: 3850 - total flux cleaned = -0.000774408 Jy ! Component: 3900 - total flux cleaned = -0.000751797 Jy ! Component: 3950 - total flux cleaned = -0.000781828 Jy ! Component: 4000 - total flux cleaned = -0.000789333 Jy ! Component: 4050 - total flux cleaned = -0.000767135 Jy ! Total flux subtracted in 4096 components = -0.000744982 Jy ! Clean residual min=-0.000478 max=0.000424 Jy/beam ! Clean residual mean=0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0701626 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 346 components and 0.0701627 Jy ![Exited script file: muppet] wmap "J1926+4209_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.209 x 7.313 at 20.51 degrees (North through East) ! Clean map min=-0.00081611 max=0.063101 Jy/beam ! Writing clean map to FITS file: J1926+4209_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0631008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130489 device "J1926+4209_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1926+4209_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.620384 0.620384 1.24077 2.48154 4.96307 9.92614 19.8523 39.7046 79.4091 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.209 x 7.313 at 20.51 degrees (North through East) ! Clean map min=-0.00081611 max=0.063101 Jy/beam quit ! Quitting program ! Log file J1926+4209_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:02:33 2016