! Started logfile: J1924-2914_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:02:23 2016
obs J1924-2914_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J1924-2914_S_2014_06_09_pus_uva.fits
! AN table 1: 126 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.438448 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1924-2914
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 9944 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1924-2914_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 573 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 573 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 573 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 573 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=5.251515Jy  sigma=0.049554
! Fit after  self-cal, rms=5.194683Jy  sigma=0.049001
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.684 mas, bmaj=6.854 mas, bpa=-2.706 degrees
! Estimated noise=1256.04 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.18457 Jy
! Component: 100  -  total flux cleaned = 5.41973 Jy
! Total flux subtracted in 100 components = 5.41973 Jy
! Clean residual min=-0.251103 max=0.543819 Jy/beam
! Clean residual mean=0.000256 rms=0.085799 Jy/beam
! Combined flux in latest and established models = 5.41973 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 5.41973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.662217Jy  sigma=0.015835
! Fit after  self-cal, rms=1.662334Jy  sigma=0.015830
! Inverting map 
! Added new window around map position (-4, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.590157 Jy
! Component: 100  -  total flux cleaned = 0.954818 Jy
! Total flux subtracted in 100 components = 0.954818 Jy
! Clean residual min=-0.217248 max=0.421059 Jy/beam
! Clean residual mean=0.000292 rms=0.061779 Jy/beam
! Combined flux in latest and established models = 6.37455 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 6.37455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.292624Jy  sigma=0.011678
! Fit after  self-cal, rms=1.292627Jy  sigma=0.011639
! Inverting map 
! Added new window around map position (4.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.412556 Jy
! Component: 100  -  total flux cleaned = 0.663069 Jy
! Total flux subtracted in 100 components = 0.663069 Jy
! Clean residual min=-0.200284 max=0.207564 Jy/beam
! Clean residual mean=0.000373 rms=0.046617 Jy/beam
! Combined flux in latest and established models = 7.03762 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 58 components and 7.03762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.048569Jy  sigma=0.009146
! Fit after  self-cal, rms=1.036477Jy  sigma=0.009068
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.647 mas, bmaj=10.5 mas, bpa=6.779 degrees
! Estimated noise=820.842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.392932 Jy
! Component: 100  -  total flux cleaned = 0.629005 Jy
! Component: 150  -  total flux cleaned = 0.783334 Jy
! Component: 200  -  total flux cleaned = 0.885453 Jy
! Total flux subtracted in 200 components = 0.885453 Jy
! Clean residual min=-0.210069 max=0.216293 Jy/beam
! Clean residual mean=0.001234 rms=0.050272 Jy/beam
! Combined flux in latest and established models = 7.92307 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 102 components and 7.92307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.877218Jy  sigma=0.007436
! Fit after  self-cal, rms=0.870152Jy  sigma=0.007378
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     HN        1.04     KP        1.03     
!   LA        1.17     MK        1.01     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     HN        1.11     KP        1.00     
!   LA        1.13     MK        1.01     NL        1.07     OV        0.99     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.14     HN        1.10     KP        0.90     
!   LA        0.90     MK        1.03     NL        1.01     OV        0.92     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        1.09     KP        0.87     
!   LA        0.87     MK        1.03     NL        1.08     OV        0.98     
!   PT        1.01     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.870152Jy  sigma=0.007378
! Fit after  self-cal, rms=0.512882Jy  sigma=0.003728
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.658 mas, bmaj=10.62 mas, bpa=7.145 degrees
! Estimated noise=822.065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15584 Jy
! Component: 100  -  total flux cleaned = 0.144374 Jy
! Component: 150  -  total flux cleaned = 0.14469 Jy
! Component: 200  -  total flux cleaned = 0.144928 Jy
! Total flux subtracted in 200 components = 0.144928 Jy
! Clean residual min=-0.089405 max=0.105474 Jy/beam
! Clean residual mean=0.000169 rms=0.024784 Jy/beam
! Combined flux in latest and established models = 8.068 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 139 components and 8.068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.405565Jy  sigma=0.002881
! Fit after  self-cal, rms=0.394304Jy  sigma=0.002764
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.394304Jy  sigma=0.002764
! Fit after  self-cal, rms=0.325416Jy  sigma=0.002202
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=10.62 mas, bpa=7.145 degrees
! Estimated noise=820.957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229604 Jy
! Component: 100  -  total flux cleaned = 0.0211401 Jy
! Component: 150  -  total flux cleaned = 0.024473 Jy
! Component: 200  -  total flux cleaned = 0.0217021 Jy
! Total flux subtracted in 200 components = 0.0217021 Jy
! Clean residual min=-0.065214 max=0.063532 Jy/beam
! Clean residual mean=0.000073 rms=0.015365 Jy/beam
! Combined flux in latest and established models = 8.0897 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 159 components and 8.0897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.286949Jy  sigma=0.001917
! Fit after  self-cal, rms=0.281930Jy  sigma=0.001861
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010621 Jy
! Component: 100  -  total flux cleaned = 0.0127986 Jy
! Component: 150  -  total flux cleaned = 0.0119618 Jy
! Component: 200  -  total flux cleaned = 0.0104083 Jy
! Total flux subtracted in 200 components = 0.0104083 Jy
! Clean residual min=-0.058561 max=0.042999 Jy/beam
! Clean residual mean=0.000085 rms=0.014073 Jy/beam
! Combined flux in latest and established models = 8.10011 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 179 components and 8.10011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269720Jy  sigma=0.001777
! Fit after  self-cal, rms=0.267482Jy  sigma=0.001755
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.267482Jy  sigma=0.001755
! Fit after  self-cal, rms=0.255383Jy  sigma=0.001698
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=10.63 mas, bpa=7.22 degrees
! Estimated noise=821.727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0171212 Jy
! Component: 100  -  total flux cleaned = -0.0180442 Jy
! Component: 150  -  total flux cleaned = -0.0172398 Jy
! Component: 200  -  total flux cleaned = -0.0157556 Jy
! Total flux subtracted in 200 components = -0.0157556 Jy
! Clean residual min=-0.052350 max=0.037243 Jy/beam
! Clean residual mean=0.000097 rms=0.011971 Jy/beam
! Combined flux in latest and established models = 8.08436 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 189 components and 8.08436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243897Jy  sigma=0.001615
! Fit after  self-cal, rms=0.241971Jy  sigma=0.001602
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540739 Jy
! Component: 100  -  total flux cleaned = 0.00966422 Jy
! Component: 150  -  total flux cleaned = 0.01026 Jy
! Component: 200  -  total flux cleaned = 0.0114098 Jy
! Total flux subtracted in 200 components = 0.0114098 Jy
! Clean residual min=-0.048935 max=0.032806 Jy/beam
! Clean residual mean=0.000113 rms=0.011525 Jy/beam
! Combined flux in latest and established models = 8.09577 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 200 components and 8.09576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.236707Jy  sigma=0.001568
! Fit after  self-cal, rms=0.235311Jy  sigma=0.001558
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235311Jy  sigma=0.001558
! Fit after  self-cal, rms=0.228506Jy  sigma=0.001533
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.974 mas, bmaj=24.4 mas, bpa=0.3648 degrees
! Estimated noise=932.094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0138872 Jy
! Component: 100  -  total flux cleaned = -0.0157992 Jy
! Component: 150  -  total flux cleaned = -0.017217 Jy
! Component: 200  -  total flux cleaned = -0.0176247 Jy
! Total flux subtracted in 200 components = -0.0176247 Jy
! Clean residual min=-0.043114 max=0.035922 Jy/beam
! Clean residual mean=0.000192 rms=0.012002 Jy/beam
! Combined flux in latest and established models = 8.07814 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 213 components and 8.07814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223320Jy  sigma=0.001504
! Fit after  self-cal, rms=0.222616Jy  sigma=0.001500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385816 Jy
! Component: 100  -  total flux cleaned = -0.000750797 Jy
! Component: 150  -  total flux cleaned = -0.00148154 Jy
! Component: 200  -  total flux cleaned = -0.00252948 Jy
! Total flux subtracted in 200 components = -0.00252948 Jy
! Clean residual min=-0.042734 max=0.035108 Jy/beam
! Clean residual mean=0.000189 rms=0.011909 Jy/beam
! Combined flux in latest and established models = 8.07561 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 221 components and 8.07561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219955Jy  sigma=0.001489
! Fit after  self-cal, rms=0.219356Jy  sigma=0.001486
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.655 mas, bmaj=10.64 mas, bpa=7.286 degrees
! Estimated noise=822.193 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.655 x 10.64 at 7.286 degrees (North through East)
! Clean map  min=-0.043693  max=5.5236 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219356Jy  sigma=0.001486
! Fit after  self-cal, rms=0.202384Jy  sigma=0.001325
! Inverting map and beam 
! Estimated beam: bmin=3.655 mas, bmaj=10.66 mas, bpa=7.351 degrees
! Estimated noise=821.522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0208453 Jy
! Component: 100  -  total flux cleaned = -0.022132 Jy
! Component: 150  -  total flux cleaned = -0.0215655 Jy
! Component: 200  -  total flux cleaned = -0.021547 Jy
! Total flux subtracted in 200 components = -0.021547 Jy
! Clean residual min=-0.042015 max=0.028969 Jy/beam
! Clean residual mean=0.000104 rms=0.009611 Jy/beam
! Combined flux in latest and established models = 8.05406 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 228 components and 8.05406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196776Jy  sigma=0.001280
! Fit after  self-cal, rms=0.195728Jy  sigma=0.001273
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185245 Jy
! Component: 100  -  total flux cleaned = 0.00236686 Jy
! Component: 150  -  total flux cleaned = 0.00238561 Jy
! Component: 200  -  total flux cleaned = 0.00282521 Jy
! Total flux subtracted in 200 components = 0.00282521 Jy
! Clean residual min=-0.040323 max=0.028149 Jy/beam
! Clean residual mean=0.000108 rms=0.009391 Jy/beam
! Combined flux in latest and established models = 8.05689 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 240 components and 8.05689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192433Jy  sigma=0.001252
! Fit after  self-cal, rms=0.191726Jy  sigma=0.001248
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191726Jy  sigma=0.001248
! Fit after  self-cal, rms=0.187363Jy  sigma=0.001234
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.688 mas, bmaj=6.871 mas, bpa=-1.75 degrees
! Estimated noise=1258.01 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.17969 Jy
! Component: 100  -  total flux cleaned = 5.38897 Jy
! Component: 150  -  total flux cleaned = 5.97019 Jy
! Component: 200  -  total flux cleaned = 6.35746 Jy
! Total flux subtracted in 200 components = 6.35746 Jy
! Clean residual min=-0.123675 max=0.245175 Jy/beam
! Clean residual mean=-0.000076 rms=0.044451 Jy/beam
! Combined flux in latest and established models = 6.35746 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 6.35746 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=10.66 mas, bpa=7.374 degrees
! Estimated noise=821.536 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.555806 Jy
! Component: 100  -  total flux cleaned = 0.902791 Jy
! Component: 150  -  total flux cleaned = 1.13161 Jy
! Component: 200  -  total flux cleaned = 1.28849 Jy
! Total flux subtracted in 200 components = 1.28849 Jy
! Clean residual min=-0.072317 max=0.093922 Jy/beam
! Clean residual mean=-0.000292 rms=0.023116 Jy/beam
! Combined flux in latest and established models = 7.64596 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 119 components and 7.64596 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.996 mas, bmaj=24.47 mas, bpa=0.3792 degrees
! Estimated noise=929.922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159921 Jy
! Component: 100  -  total flux cleaned = 0.249577 Jy
! Component: 150  -  total flux cleaned = 0.303239 Jy
! Component: 200  -  total flux cleaned = 0.324657 Jy
! Total flux subtracted in 200 components = 0.324657 Jy
! Clean residual min=-0.042568 max=0.031912 Jy/beam
! Clean residual mean=0.000042 rms=0.012235 Jy/beam
! Combined flux in latest and established models = 7.97061 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011721 Jy
! Component: 100  -  total flux cleaned = 0.0208404 Jy
! Component: 150  -  total flux cleaned = 0.0279278 Jy
! Component: 200  -  total flux cleaned = 0.0334198 Jy
! Total flux subtracted in 200 components = 0.0334198 Jy
! Clean residual min=-0.037824 max=0.026329 Jy/beam
! Clean residual mean=0.000110 rms=0.010358 Jy/beam
! Combined flux in latest and established models = 8.00403 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 173 components and 8.00403 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=10.66 mas, bpa=7.374 degrees
! Estimated noise=821.536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00085073 Jy
! Component: 100  -  total flux cleaned = 0.00539395 Jy
! Component: 150  -  total flux cleaned = 0.00668117 Jy
! Component: 200  -  total flux cleaned = 0.0084543 Jy
! Total flux subtracted in 200 components = 0.0084543 Jy
! Clean residual min=-0.039325 max=0.026202 Jy/beam
! Clean residual mean=0.000078 rms=0.008632 Jy/beam
! Combined flux in latest and established models = 8.01249 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 189 components and 8.01249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182414Jy  sigma=0.001201
! Fit after  self-cal, rms=0.180587Jy  sigma=0.001184
wmodel J1924-2914_S_2014_06_09_pus_map.mod
! Writing 189 model components to file: J1924-2914_S_2014_06_09_pus_map.mod
wobs J1924-2914_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J1924-2914_S_2014_06_09_pus_uvs.fits
wwins J1924-2914_S_2014_06_09_pus_map.win
! wwins: Wrote 4 windows to J1924-2914_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0163322 Jy
! Component: 100  -  total flux cleaned = -0.0307973 Jy
! Component: 150  -  total flux cleaned = -0.0425379 Jy
! Component: 200  -  total flux cleaned = -0.0529995 Jy
! Component: 250  -  total flux cleaned = -0.0605265 Jy
! Component: 300  -  total flux cleaned = -0.0672122 Jy
! Component: 350  -  total flux cleaned = -0.0731548 Jy
! Component: 400  -  total flux cleaned = -0.0764186 Jy
! Component: 450  -  total flux cleaned = -0.0803398 Jy
! Component: 500  -  total flux cleaned = -0.0844868 Jy
! Component: 550  -  total flux cleaned = -0.0881274 Jy
! Component: 600  -  total flux cleaned = -0.091661 Jy
! Component: 650  -  total flux cleaned = -0.0940608 Jy
! Component: 700  -  total flux cleaned = -0.0964026 Jy
! Component: 750  -  total flux cleaned = -0.0993297 Jy
! Component: 800  -  total flux cleaned = -0.102175 Jy
! Component: 850  -  total flux cleaned = -0.104336 Jy
! Component: 900  -  total flux cleaned = -0.107344 Jy
! Component: 950  -  total flux cleaned = -0.11086 Jy
! Component: 1000  -  total flux cleaned = -0.113143 Jy
! Component: 1050  -  total flux cleaned = -0.115662 Jy
! Component: 1100  -  total flux cleaned = -0.117854 Jy
! Component: 1150  -  total flux cleaned = -0.119727 Jy
! Component: 1200  -  total flux cleaned = -0.121564 Jy
! Component: 1250  -  total flux cleaned = -0.123108 Jy
! Component: 1300  -  total flux cleaned = -0.124626 Jy
! Component: 1350  -  total flux cleaned = -0.125866 Jy
! Component: 1400  -  total flux cleaned = -0.127083 Jy
! Component: 1450  -  total flux cleaned = -0.128757 Jy
! Component: 1500  -  total flux cleaned = -0.12993 Jy
! Component: 1550  -  total flux cleaned = -0.131314 Jy
! Component: 1600  -  total flux cleaned = -0.131547 Jy
! Component: 1650  -  total flux cleaned = -0.132886 Jy
! Component: 1700  -  total flux cleaned = -0.133327 Jy
! Component: 1750  -  total flux cleaned = -0.134407 Jy
! Component: 1800  -  total flux cleaned = -0.135681 Jy
! Component: 1850  -  total flux cleaned = -0.136308 Jy
! Component: 1900  -  total flux cleaned = -0.137135 Jy
! Component: 1950  -  total flux cleaned = -0.137948 Jy
! Component: 2000  -  total flux cleaned = -0.139146 Jy
! Component: 2050  -  total flux cleaned = -0.140131 Jy
! Component: 2100  -  total flux cleaned = -0.141489 Jy
! Component: 2150  -  total flux cleaned = -0.141868 Jy
! Component: 2200  -  total flux cleaned = -0.142055 Jy
! Component: 2250  -  total flux cleaned = -0.142428 Jy
! Component: 2300  -  total flux cleaned = -0.143344 Jy
! Component: 2350  -  total flux cleaned = -0.143885 Jy
! Component: 2400  -  total flux cleaned = -0.143528 Jy
! Component: 2450  -  total flux cleaned = -0.144238 Jy
! Component: 2500  -  total flux cleaned = -0.144764 Jy
! Component: 2550  -  total flux cleaned = -0.145453 Jy
! Component: 2600  -  total flux cleaned = -0.145283 Jy
! Component: 2650  -  total flux cleaned = -0.145283 Jy
! Component: 2700  -  total flux cleaned = -0.145946 Jy
! Component: 2750  -  total flux cleaned = -0.146272 Jy
! Component: 2800  -  total flux cleaned = -0.146595 Jy
! Component: 2850  -  total flux cleaned = -0.146913 Jy
! Component: 2900  -  total flux cleaned = -0.147068 Jy
! Component: 2950  -  total flux cleaned = -0.146601 Jy
! Component: 3000  -  total flux cleaned = -0.14691 Jy
! Component: 3050  -  total flux cleaned = -0.147212 Jy
! Component: 3100  -  total flux cleaned = -0.147063 Jy
! Component: 3150  -  total flux cleaned = -0.147211 Jy
! Component: 3200  -  total flux cleaned = -0.147501 Jy
! Component: 3250  -  total flux cleaned = -0.147499 Jy
! Component: 3300  -  total flux cleaned = -0.147639 Jy
! Component: 3350  -  total flux cleaned = -0.147637 Jy
! Component: 3400  -  total flux cleaned = -0.148191 Jy
! Component: 3450  -  total flux cleaned = -0.147365 Jy
! Component: 3500  -  total flux cleaned = -0.147499 Jy
! Component: 3550  -  total flux cleaned = -0.147632 Jy
! Component: 3600  -  total flux cleaned = -0.14763 Jy
! Component: 3650  -  total flux cleaned = -0.147497 Jy
! Component: 3700  -  total flux cleaned = -0.147234 Jy
! Component: 3750  -  total flux cleaned = -0.146975 Jy
! Component: 3800  -  total flux cleaned = -0.146977 Jy
! Component: 3850  -  total flux cleaned = -0.147357 Jy
! Component: 3900  -  total flux cleaned = -0.146981 Jy
! Component: 3950  -  total flux cleaned = -0.146981 Jy
! Component: 4000  -  total flux cleaned = -0.146611 Jy
! Component: 4050  -  total flux cleaned = -0.146733 Jy
! Total flux subtracted in 4096 components = -0.146732 Jy
! Clean residual min=-0.006148 max=0.006289 Jy/beam
! Clean residual mean=0.000015 rms=0.002478 Jy/beam
! Combined flux in latest and established models = 7.86575 Jy
keep
! Adding 319 model components to the UV plane model.
! The established model now contains 508 components and 7.86575 Jy
![Exited script file: muppet]
wmap "J1924-2914_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.656 x 10.66 at 7.374 degrees (North through East)
! Clean map  min=-0.027673  max=5.6272 Jy/beam
! Writing clean map to FITS file: J1924-2914_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 5.62717 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00249506 
device "J1924-2914_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1924-2914_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.133019 0.133019 0.266037 0.532074 1.06415 2.1283 4.25659 8.51319 17.0264 34.0527 68.1055
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0074 
print "peak=",int(1000*peak_flux)/1000
! peak= 5.627 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.656 x 10.66 at 7.374 degrees (North through East)
! Clean map  min=-0.027673  max=5.6272 Jy/beam
quit
! Quitting program
! Log file J1924-2914_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:02:28 2016