! Started logfile: J1829-3904_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:01:01 2016 obs J1829-3904_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1829-3904_S_2014_06_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.617344 visibilities/baseline/integration-bin. ! Found source: J1829-3904 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 13668 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1829-3904_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981999Jy sigma=0.007303 ! Fit after self-cal, rms=0.930347Jy sigma=0.006972 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=5.915 mas, bpa=-1.342 degrees ! Estimated noise=1628.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574066 Jy ! Component: 100 - total flux cleaned = 0.0721136 Jy ! Total flux subtracted in 100 components = 0.0721136 Jy ! Clean residual min=-0.006089 max=0.005654 Jy/beam ! Clean residual mean=-0.000006 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.0721136 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0721136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117562Jy sigma=0.000764 ! Fit after self-cal, rms=0.117054Jy sigma=0.000762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=7.665 mas, bpa=0.6945 degrees ! Estimated noise=829.629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805814 Jy ! Component: 100 - total flux cleaned = 0.0114314 Jy ! Component: 150 - total flux cleaned = 0.0130064 Jy ! Component: 200 - total flux cleaned = 0.0135143 Jy ! Total flux subtracted in 200 components = 0.0135143 Jy ! Clean residual min=-0.002634 max=0.002975 Jy/beam ! Clean residual mean=0.000007 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0856279 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.0856279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116616Jy sigma=0.000758 ! Fit after self-cal, rms=0.116601Jy sigma=0.000757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.08 KP 1.02 ! LA 1.13 MK 0.98 NL 1.08 OV 1.00 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.15 KP 1.01 ! LA 1.05 MK 1.05 NL 1.13 OV 0.99 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.04 KP 0.95 ! LA 0.86 MK 0.99 NL 1.12 OV 0.97 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.99 KP 0.93 ! LA 0.87 MK 0.95 NL 1.13 OV 0.97 ! PT 1.01 SC 0.99 ! ! ! Fit before self-cal, rms=0.116601Jy sigma=0.000757 ! Fit after self-cal, rms=0.120461Jy sigma=0.000755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=7.676 mas, bpa=0.6276 degrees ! Estimated noise=830.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.71713e-06 Jy ! Component: 100 - total flux cleaned = 9.71589e-06 Jy ! Component: 150 - total flux cleaned = 5.46616e-05 Jy ! Component: 200 - total flux cleaned = 7.65094e-05 Jy ! Total flux subtracted in 200 components = 7.65094e-05 Jy ! Clean residual min=-0.002355 max=0.002816 Jy/beam ! Clean residual mean=0.000013 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0857044 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0857044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120447Jy sigma=0.000755 ! Fit after self-cal, rms=0.120606Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120606Jy sigma=0.000755 ! Fit after self-cal, rms=0.122430Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=7.7 mas, bpa=0.2889 degrees ! Estimated noise=832.706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76349e-05 Jy ! Component: 100 - total flux cleaned = 6.81382e-05 Jy ! Component: 150 - total flux cleaned = 0.000103953 Jy ! Component: 200 - total flux cleaned = 0.000119916 Jy ! Total flux subtracted in 200 components = 0.000119916 Jy ! Clean residual min=-0.002373 max=0.002333 Jy/beam ! Clean residual mean=0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0858243 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0858243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122418Jy sigma=0.000754 ! Fit after self-cal, rms=0.122405Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.47496e-06 Jy ! Component: 100 - total flux cleaned = 1.50088e-05 Jy ! Component: 150 - total flux cleaned = 4.8256e-05 Jy ! Component: 200 - total flux cleaned = 6.3292e-05 Jy ! Total flux subtracted in 200 components = 6.3292e-05 Jy ! Clean residual min=-0.002401 max=0.002370 Jy/beam ! Clean residual mean=0.000008 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0858876 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0858876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122398Jy sigma=0.000753 ! Fit after self-cal, rms=0.122391Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122391Jy sigma=0.000753 ! Fit after self-cal, rms=0.122496Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=7.715 mas, bpa=0.04666 degrees ! Estimated noise=833.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.80464e-05 Jy ! Component: 100 - total flux cleaned = 6.89112e-05 Jy ! Component: 150 - total flux cleaned = 0.000102481 Jy ! Component: 200 - total flux cleaned = 0.00011803 Jy ! Total flux subtracted in 200 components = 0.00011803 Jy ! Clean residual min=-0.002432 max=0.002320 Jy/beam ! Clean residual mean=0.000006 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0860057 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0860057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122487Jy sigma=0.000753 ! Fit after self-cal, rms=0.122481Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29671e-05 Jy ! Component: 100 - total flux cleaned = -9.81414e-06 Jy ! Component: 150 - total flux cleaned = 6.0426e-06 Jy ! Component: 200 - total flux cleaned = 2.00581e-05 Jy ! Total flux subtracted in 200 components = 2.00581e-05 Jy ! Clean residual min=-0.002432 max=0.002330 Jy/beam ! Clean residual mean=0.000006 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0860257 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0860257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122474Jy sigma=0.000753 ! Fit after self-cal, rms=0.122464Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122464Jy sigma=0.000753 ! Fit after self-cal, rms=0.122524Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.787 mas, bmaj=27.72 mas, bpa=5.185 degrees ! Estimated noise=984.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309611 Jy ! Component: 100 - total flux cleaned = 0.00031041 Jy ! Component: 150 - total flux cleaned = 0.00031074 Jy ! Component: 200 - total flux cleaned = 0.000310949 Jy ! Total flux subtracted in 200 components = 0.000310949 Jy ! Clean residual min=-0.002152 max=0.001723 Jy/beam ! Clean residual mean=0.000008 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0863367 Jy selfcal ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 32 components and 0.0863367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122519Jy sigma=0.000753 ! Fit after self-cal, rms=0.122510Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93438e-05 Jy ! Component: 100 - total flux cleaned = 3.99608e-05 Jy ! Component: 150 - total flux cleaned = 4.02309e-05 Jy ! Component: 200 - total flux cleaned = 4.04125e-05 Jy ! Total flux subtracted in 200 components = 4.04125e-05 Jy ! Clean residual min=-0.002175 max=0.001715 Jy/beam ! Clean residual mean=0.000008 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0863771 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.0863771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122508Jy sigma=0.000753 ! Fit after self-cal, rms=0.122498Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.73 mas, bpa=-0.126 degrees ! Estimated noise=833.916 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.73 at -0.126 degrees (North through East) ! Clean map min=-0.002329 max=0.072178 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=5.916 mas, bpa=-1.864 degrees ! Estimated noise=1634.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576109 Jy ! Component: 100 - total flux cleaned = 0.0736808 Jy ! Component: 150 - total flux cleaned = 0.0799313 Jy ! Component: 200 - total flux cleaned = 0.0831065 Jy ! Total flux subtracted in 200 components = 0.0831065 Jy ! Clean residual min=-0.005272 max=0.005603 Jy/beam ! Clean residual mean=-0.000006 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.0831065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0831065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.73 mas, bpa=-0.126 degrees ! Estimated noise=833.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277266 Jy ! Component: 100 - total flux cleaned = 0.00325829 Jy ! Component: 150 - total flux cleaned = 0.00353742 Jy ! Component: 200 - total flux cleaned = 0.00357343 Jy ! Total flux subtracted in 200 components = 0.00357343 Jy ! Clean residual min=-0.002429 max=0.002533 Jy/beam ! Clean residual mean=0.000007 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0866799 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0866799 Jy ! Inverting map ! Added new window around map position (-116.5, -51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135036 Jy ! Component: 100 - total flux cleaned = 0.00118962 Jy ! Component: 150 - total flux cleaned = 0.00114057 Jy ! Component: 200 - total flux cleaned = 0.00121664 Jy ! Total flux subtracted in 200 components = 0.00121664 Jy ! Clean residual min=-0.002342 max=0.002246 Jy/beam ! Clean residual mean=0.000003 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0878965 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.0878965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.787 mas, bmaj=27.72 mas, bpa=5.185 degrees ! Estimated noise=984.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204957 Jy ! Component: 100 - total flux cleaned = 0.000407199 Jy ! Component: 150 - total flux cleaned = 0.000483291 Jy ! Component: 200 - total flux cleaned = 0.000517981 Jy ! Total flux subtracted in 200 components = 0.000517981 Jy ! Clean residual min=-0.001960 max=0.001804 Jy/beam ! Clean residual mean=0.000004 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0884145 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60918e-05 Jy ! Component: 100 - total flux cleaned = 3.10602e-05 Jy ! Component: 150 - total flux cleaned = 4.59858e-05 Jy ! Component: 200 - total flux cleaned = 6.04464e-05 Jy ! Total flux subtracted in 200 components = 6.04464e-05 Jy ! Clean residual min=-0.001938 max=0.001799 Jy/beam ! Clean residual mean=0.000005 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0884749 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.0884749 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.73 mas, bpa=-0.126 degrees ! Estimated noise=833.916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.29738e-05 Jy ! Component: 100 - total flux cleaned = -0.00015089 Jy ! Component: 150 - total flux cleaned = -0.000214527 Jy ! Component: 200 - total flux cleaned = -0.000273167 Jy ! Total flux subtracted in 200 components = -0.000273167 Jy ! Clean residual min=-0.002281 max=0.002116 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0882018 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.0882018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122406Jy sigma=0.000753 ! Fit after self-cal, rms=0.122301Jy sigma=0.000753 wmodel J1829-3904_S_2014_06_09_pus_map.mod ! Writing 83 model components to file: J1829-3904_S_2014_06_09_pus_map.mod wobs J1829-3904_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1829-3904_S_2014_06_09_pus_uvs.fits wwins J1829-3904_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1829-3904_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.40287e-05 Jy ! Component: 100 - total flux cleaned = 0.000131411 Jy ! Component: 150 - total flux cleaned = 0.000204673 Jy ! Component: 200 - total flux cleaned = 0.000276437 Jy ! Component: 250 - total flux cleaned = 0.000413765 Jy ! Component: 300 - total flux cleaned = 0.000446176 Jy ! Component: 350 - total flux cleaned = 0.000478914 Jy ! Component: 400 - total flux cleaned = 0.000478927 Jy ! Component: 450 - total flux cleaned = 0.000478659 Jy ! Component: 500 - total flux cleaned = 0.000419451 Jy ! Component: 550 - total flux cleaned = 0.000362116 Jy ! Component: 600 - total flux cleaned = 0.000389999 Jy ! Component: 650 - total flux cleaned = 0.000280418 Jy ! Component: 700 - total flux cleaned = 0.000307818 Jy ! Component: 750 - total flux cleaned = 0.000307907 Jy ! Component: 800 - total flux cleaned = 0.000308221 Jy ! Component: 850 - total flux cleaned = 0.000333619 Jy ! Component: 900 - total flux cleaned = 0.000333919 Jy ! Component: 950 - total flux cleaned = 0.000382183 Jy ! Component: 1000 - total flux cleaned = 0.000358459 Jy ! Component: 1050 - total flux cleaned = 0.000312443 Jy ! Component: 1100 - total flux cleaned = 0.000335561 Jy ! Component: 1150 - total flux cleaned = 0.000267878 Jy ! Component: 1200 - total flux cleaned = 0.000312558 Jy ! Component: 1250 - total flux cleaned = 0.000377843 Jy ! Component: 1300 - total flux cleaned = 0.000335069 Jy ! Component: 1350 - total flux cleaned = 0.000377481 Jy ! Component: 1400 - total flux cleaned = 0.000377345 Jy ! Component: 1450 - total flux cleaned = 0.000418602 Jy ! Component: 1500 - total flux cleaned = 0.000378142 Jy ! Component: 1550 - total flux cleaned = 0.000358283 Jy ! Component: 1600 - total flux cleaned = 0.000397712 Jy ! Component: 1650 - total flux cleaned = 0.00043681 Jy ! Component: 1700 - total flux cleaned = 0.000455771 Jy ! Component: 1750 - total flux cleaned = 0.000436593 Jy ! Component: 1800 - total flux cleaned = 0.000474668 Jy ! Component: 1850 - total flux cleaned = 0.000512207 Jy ! Component: 1900 - total flux cleaned = 0.000456605 Jy ! Component: 1950 - total flux cleaned = 0.000493598 Jy ! Component: 2000 - total flux cleaned = 0.000620619 Jy ! Component: 2050 - total flux cleaned = 0.000656352 Jy ! Component: 2100 - total flux cleaned = 0.000620706 Jy ! Component: 2150 - total flux cleaned = 0.000656099 Jy ! Component: 2200 - total flux cleaned = 0.000656049 Jy ! Component: 2250 - total flux cleaned = 0.000759721 Jy ! Component: 2300 - total flux cleaned = 0.000810789 Jy ! Component: 2350 - total flux cleaned = 0.000844586 Jy ! Component: 2400 - total flux cleaned = 0.000894821 Jy ! Component: 2450 - total flux cleaned = 0.000944832 Jy ! Component: 2500 - total flux cleaned = 0.000961189 Jy ! Component: 2550 - total flux cleaned = 0.000977415 Jy ! Component: 2600 - total flux cleaned = 0.000961318 Jy ! Component: 2650 - total flux cleaned = 0.00100938 Jy ! Component: 2700 - total flux cleaned = 0.00107282 Jy ! Component: 2750 - total flux cleaned = 0.00108842 Jy ! Component: 2800 - total flux cleaned = 0.00108849 Jy ! Component: 2850 - total flux cleaned = 0.00113491 Jy ! Component: 2900 - total flux cleaned = 0.00113505 Jy ! Component: 2950 - total flux cleaned = 0.00121131 Jy ! Component: 3000 - total flux cleaned = 0.00124144 Jy ! Component: 3050 - total flux cleaned = 0.00124157 Jy ! Component: 3100 - total flux cleaned = 0.00127153 Jy ! Component: 3150 - total flux cleaned = 0.00131573 Jy ! Component: 3200 - total flux cleaned = 0.00135961 Jy ! Component: 3250 - total flux cleaned = 0.001345 Jy ! Component: 3300 - total flux cleaned = 0.00133076 Jy ! Component: 3350 - total flux cleaned = 0.00135943 Jy ! Component: 3400 - total flux cleaned = 0.00138778 Jy ! Component: 3450 - total flux cleaned = 0.00140167 Jy ! Component: 3500 - total flux cleaned = 0.00138764 Jy ! Component: 3550 - total flux cleaned = 0.0014154 Jy ! Component: 3600 - total flux cleaned = 0.00144282 Jy ! Component: 3650 - total flux cleaned = 0.00142907 Jy ! Component: 3700 - total flux cleaned = 0.00144286 Jy ! Component: 3750 - total flux cleaned = 0.00148331 Jy ! Component: 3800 - total flux cleaned = 0.00151024 Jy ! Component: 3850 - total flux cleaned = 0.00157681 Jy ! Component: 3900 - total flux cleaned = 0.00162962 Jy ! Component: 3950 - total flux cleaned = 0.00168213 Jy ! Component: 4000 - total flux cleaned = 0.00169521 Jy ! Component: 4050 - total flux cleaned = 0.00177317 Jy ! Total flux subtracted in 4096 components = 0.00181177 Jy ! Clean residual min=-0.000811 max=0.000879 Jy/beam ! Clean residual mean=0.000007 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.0900135 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 314 components and 0.0900135 Jy ![Exited script file: muppet] wmap "J1829-3904_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.73 at -0.126 degrees (North through East) ! Clean map min=-0.002251 max=0.072151 Jy/beam ! Writing clean map to FITS file: J1829-3904_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0721506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238192 device "J1829-3904_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1829-3904_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.990393 0.990393 1.98079 3.96157 7.92315 15.8463 31.6926 63.3852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 7.73 at -0.126 degrees (North through East) ! Clean map min=-0.002251 max=0.072151 Jy/beam quit ! Quitting program ! Log file J1829-3904_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:01:05 2016