! Started logfile: J1746+6226_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:59:53 2016 obs J1746+6226_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1746+6226_S_2014_06_09_pus_uva.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.663194 visibilities/baseline/integration-bin. ! Found source: J1746+6226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 3820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1746+6226_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782511Jy sigma=0.009183 ! Fit after self-cal, rms=0.777762Jy sigma=0.009132 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=6.568 mas, bpa=50.43 degrees ! Estimated noise=1269.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174783 Jy ! Component: 100 - total flux cleaned = 0.213037 Jy ! Total flux subtracted in 100 components = 0.213037 Jy ! Clean residual min=-0.009990 max=0.014556 Jy/beam ! Clean residual mean=-0.000035 rms=0.002472 Jy/beam ! Combined flux in latest and established models = 0.213037 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.213037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081452Jy sigma=0.000894 ! Fit after self-cal, rms=0.081433Jy sigma=0.000893 ! Inverting map ! Added new window around map position (-9, -13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153881 Jy ! Component: 100 - total flux cleaned = 0.0259375 Jy ! Total flux subtracted in 100 components = 0.0259375 Jy ! Clean residual min=-0.008682 max=0.009155 Jy/beam ! Clean residual mean=-0.000017 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.238974 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.238974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077741Jy sigma=0.000844 ! Fit after self-cal, rms=0.077619Jy sigma=0.000843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=7.451 mas, bpa=52.15 degrees ! Estimated noise=995.308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122981 Jy ! Component: 100 - total flux cleaned = 0.0206896 Jy ! Component: 150 - total flux cleaned = 0.0270904 Jy ! Component: 200 - total flux cleaned = 0.0320174 Jy ! Total flux subtracted in 200 components = 0.0320174 Jy ! Clean residual min=-0.005526 max=0.004864 Jy/beam ! Clean residual mean=-0.000004 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.270992 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.270992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075147Jy sigma=0.000811 ! Fit after self-cal, rms=0.075066Jy sigma=0.000810 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.97 KP 1.04 ! LA 1.17 MK 1.04 NL 0.97 OV 0.96 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.02 KP 1.03 ! LA 1.09 MK 1.03 NL 1.03 OV 1.01 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.03 KP 0.89 ! LA 0.88 MK 1.05 NL 0.97 OV 0.96 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 0.89 ! LA 0.85 MK 1.05 NL 1.03 OV 1.01 ! PT 1.01 SC 0.95 ! ! ! Fit before self-cal, rms=0.075066Jy sigma=0.000810 ! Fit after self-cal, rms=0.069734Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=7.438 mas, bpa=52.29 degrees ! Estimated noise=981.282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426602 Jy ! Component: 100 - total flux cleaned = 0.00708708 Jy ! Component: 150 - total flux cleaned = 0.00913918 Jy ! Component: 200 - total flux cleaned = 0.0101001 Jy ! Total flux subtracted in 200 components = 0.0101001 Jy ! Clean residual min=-0.003764 max=0.003421 Jy/beam ! Clean residual mean=-0.000011 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.281092 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 93 components and 0.281092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069446Jy sigma=0.000765 ! Fit after self-cal, rms=0.069420Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069420Jy sigma=0.000765 ! Fit after self-cal, rms=0.069440Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=7.444 mas, bpa=52.12 degrees ! Estimated noise=982.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167512 Jy ! Component: 100 - total flux cleaned = 0.00287004 Jy ! Component: 150 - total flux cleaned = 0.00355817 Jy ! Component: 200 - total flux cleaned = 0.00385057 Jy ! Total flux subtracted in 200 components = 0.00385057 Jy ! Clean residual min=-0.003570 max=0.003328 Jy/beam ! Clean residual mean=-0.000004 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.284942 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 118 components and 0.284942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069386Jy sigma=0.000762 ! Fit after self-cal, rms=0.069389Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559776 Jy ! Component: 100 - total flux cleaned = 0.000645459 Jy ! Component: 150 - total flux cleaned = 0.00067219 Jy ! Component: 200 - total flux cleaned = 0.000747107 Jy ! Total flux subtracted in 200 components = 0.000747107 Jy ! Clean residual min=-0.003414 max=0.003238 Jy/beam ! Clean residual mean=-0.000004 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.285689 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 0.28569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069369Jy sigma=0.000761 ! Fit after self-cal, rms=0.069369Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069369Jy sigma=0.000761 ! Fit after self-cal, rms=0.069361Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=7.433 mas, bpa=52.13 degrees ! Estimated noise=982.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951015 Jy ! Component: 100 - total flux cleaned = 0.00152785 Jy ! Component: 150 - total flux cleaned = 0.00171502 Jy ! Component: 200 - total flux cleaned = 0.0018016 Jy ! Total flux subtracted in 200 components = 0.0018016 Jy ! Clean residual min=-0.003447 max=0.003152 Jy/beam ! Clean residual mean=-0.000002 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.287491 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 143 components and 0.287491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069341Jy sigma=0.000761 ! Fit after self-cal, rms=0.069339Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289292 Jy ! Component: 100 - total flux cleaned = 0.000329866 Jy ! Component: 150 - total flux cleaned = 0.000387774 Jy ! Component: 200 - total flux cleaned = 0.0004059 Jy ! Total flux subtracted in 200 components = 0.0004059 Jy ! Clean residual min=-0.003361 max=0.003099 Jy/beam ! Clean residual mean=-0.000002 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.287897 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.287897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069329Jy sigma=0.000761 ! Fit after self-cal, rms=0.069329Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069329Jy sigma=0.000761 ! Fit after self-cal, rms=0.069340Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.314 mas, bmaj=10.68 mas, bpa=68.17 degrees ! Estimated noise=1151.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113034 Jy ! Component: 100 - total flux cleaned = 0.00175189 Jy ! Component: 150 - total flux cleaned = 0.00201125 Jy ! Component: 200 - total flux cleaned = 0.00202628 Jy ! Total flux subtracted in 200 components = 0.00202628 Jy ! Clean residual min=-0.003673 max=0.003904 Jy/beam ! Clean residual mean=-0.000000 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.289923 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 160 components and 0.289923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069337Jy sigma=0.000761 ! Fit after self-cal, rms=0.069334Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171665 Jy ! Component: 100 - total flux cleaned = 0.000263172 Jy ! Component: 150 - total flux cleaned = 0.000289156 Jy ! Component: 200 - total flux cleaned = 0.000313335 Jy ! Total flux subtracted in 200 components = 0.000313335 Jy ! Clean residual min=-0.003614 max=0.003829 Jy/beam ! Clean residual mean=-0.000000 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.290237 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 168 components and 0.290237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069334Jy sigma=0.000761 ! Fit after self-cal, rms=0.069333Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=7.425 mas, bpa=52.15 degrees ! Estimated noise=983.519 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.964 x 7.425 at 52.15 degrees (North through East) ! Clean map min=-0.003229 max=0.22342 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.536 mas, bpa=50.49 degrees ! Estimated noise=1252.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172458 Jy ! Component: 100 - total flux cleaned = 0.210611 Jy ! Component: 150 - total flux cleaned = 0.226637 Jy ! Component: 200 - total flux cleaned = 0.237951 Jy ! Total flux subtracted in 200 components = 0.237951 Jy ! Clean residual min=-0.006755 max=0.006468 Jy/beam ! Clean residual mean=-0.000026 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 0.237951 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.237951 Jy ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=7.425 mas, bpa=52.15 degrees ! Estimated noise=983.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120397 Jy ! Component: 100 - total flux cleaned = 0.02058 Jy ! Component: 150 - total flux cleaned = 0.02704 Jy ! Component: 200 - total flux cleaned = 0.0319681 Jy ! Total flux subtracted in 200 components = 0.0319681 Jy ! Clean residual min=-0.004276 max=0.004023 Jy/beam ! Clean residual mean=-0.000018 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.269919 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 73 components and 0.269919 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.314 mas, bmaj=10.68 mas, bpa=68.17 degrees ! Estimated noise=1151.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603422 Jy ! Component: 100 - total flux cleaned = 0.0100922 Jy ! Component: 150 - total flux cleaned = 0.0129698 Jy ! Component: 200 - total flux cleaned = 0.0150783 Jy ! Total flux subtracted in 200 components = 0.0150783 Jy ! Clean residual min=-0.004129 max=0.003484 Jy/beam ! Clean residual mean=-0.000007 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.284997 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156099 Jy ! Component: 100 - total flux cleaned = 0.00272106 Jy ! Component: 150 - total flux cleaned = 0.00358595 Jy ! Component: 200 - total flux cleaned = 0.00423265 Jy ! Total flux subtracted in 200 components = 0.00423265 Jy ! Clean residual min=-0.003744 max=0.003664 Jy/beam ! Clean residual mean=-0.000001 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.28923 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 153 components and 0.28923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=7.425 mas, bpa=52.15 degrees ! Estimated noise=983.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524217 Jy ! Component: 100 - total flux cleaned = 0.000763499 Jy ! Component: 150 - total flux cleaned = 0.000860804 Jy ! Component: 200 - total flux cleaned = 0.000913524 Jy ! Total flux subtracted in 200 components = 0.000913524 Jy ! Clean residual min=-0.003344 max=0.003127 Jy/beam ! Clean residual mean=-0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.290143 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 175 components and 0.290143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069347Jy sigma=0.000761 ! Fit after self-cal, rms=0.069339Jy sigma=0.000761 wmodel J1746+6226_S_2014_06_09_pus_map.mod ! Writing 175 model components to file: J1746+6226_S_2014_06_09_pus_map.mod wobs J1746+6226_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1746+6226_S_2014_06_09_pus_uvs.fits wwins J1746+6226_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1746+6226_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000769453 Jy ! Component: 100 - total flux cleaned = -0.00146043 Jy ! Component: 150 - total flux cleaned = -0.00185862 Jy ! Component: 200 - total flux cleaned = -0.00237365 Jy ! Component: 250 - total flux cleaned = -0.00290988 Jy ! Component: 300 - total flux cleaned = -0.00354929 Jy ! Component: 350 - total flux cleaned = -0.00408061 Jy ! Component: 400 - total flux cleaned = -0.00459314 Jy ! Component: 450 - total flux cleaned = -0.00497378 Jy ! Component: 500 - total flux cleaned = -0.00530503 Jy ! Component: 550 - total flux cleaned = -0.0055547 Jy ! Component: 600 - total flux cleaned = -0.00572881 Jy ! Component: 650 - total flux cleaned = -0.00589641 Jy ! Component: 700 - total flux cleaned = -0.00596085 Jy ! Component: 750 - total flux cleaned = -0.00605688 Jy ! Component: 800 - total flux cleaned = -0.00621217 Jy ! Component: 850 - total flux cleaned = -0.00636287 Jy ! Component: 900 - total flux cleaned = -0.00645127 Jy ! Component: 950 - total flux cleaned = -0.00653839 Jy ! Component: 1000 - total flux cleaned = -0.00665172 Jy ! Component: 1050 - total flux cleaned = -0.00673489 Jy ! Component: 1100 - total flux cleaned = -0.00687091 Jy ! Component: 1150 - total flux cleaned = -0.00697735 Jy ! Component: 1200 - total flux cleaned = -0.0071348 Jy ! Component: 1250 - total flux cleaned = -0.00728995 Jy ! Component: 1300 - total flux cleaned = -0.00739149 Jy ! Component: 1350 - total flux cleaned = -0.00751597 Jy ! Component: 1400 - total flux cleaned = -0.0075652 Jy ! Component: 1450 - total flux cleaned = -0.00771008 Jy ! Component: 1500 - total flux cleaned = -0.00773384 Jy ! Component: 1550 - total flux cleaned = -0.00780436 Jy ! Component: 1600 - total flux cleaned = -0.00791999 Jy ! Component: 1650 - total flux cleaned = -0.00796576 Jy ! Component: 1700 - total flux cleaned = -0.0079883 Jy ! Component: 1750 - total flux cleaned = -0.00807677 Jy ! Component: 1800 - total flux cleaned = -0.00814191 Jy ! Component: 1850 - total flux cleaned = -0.0081633 Jy ! Component: 1900 - total flux cleaned = -0.00826941 Jy ! Component: 1950 - total flux cleaned = -0.00833194 Jy ! Component: 2000 - total flux cleaned = -0.00843503 Jy ! Component: 2050 - total flux cleaned = -0.008496 Jy ! Component: 2100 - total flux cleaned = -0.00857677 Jy ! Component: 2150 - total flux cleaned = -0.00865651 Jy ! Component: 2200 - total flux cleaned = -0.00869602 Jy ! Component: 2250 - total flux cleaned = -0.00879331 Jy ! Component: 2300 - total flux cleaned = -0.00885098 Jy ! Component: 2350 - total flux cleaned = -0.00892716 Jy ! Component: 2400 - total flux cleaned = -0.00896495 Jy ! Component: 2450 - total flux cleaned = -0.00900233 Jy ! Component: 2500 - total flux cleaned = -0.00902107 Jy ! Component: 2550 - total flux cleaned = -0.00911269 Jy ! Component: 2600 - total flux cleaned = -0.00914895 Jy ! Component: 2650 - total flux cleaned = -0.00922085 Jy ! Component: 2700 - total flux cleaned = -0.00927431 Jy ! Component: 2750 - total flux cleaned = -0.00936257 Jy ! Component: 2800 - total flux cleaned = -0.00939758 Jy ! Component: 2850 - total flux cleaned = -0.00950177 Jy ! Component: 2900 - total flux cleaned = -0.00951917 Jy ! Component: 2950 - total flux cleaned = -0.00957052 Jy ! Component: 3000 - total flux cleaned = -0.0096215 Jy ! Component: 3050 - total flux cleaned = -0.00968898 Jy ! Component: 3100 - total flux cleaned = -0.00973918 Jy ! Component: 3150 - total flux cleaned = -0.00977256 Jy ! Component: 3200 - total flux cleaned = -0.00980577 Jy ! Component: 3250 - total flux cleaned = -0.0098715 Jy ! Component: 3300 - total flux cleaned = -0.00993668 Jy ! Component: 3350 - total flux cleaned = -0.0100014 Jy ! Component: 3400 - total flux cleaned = -0.0100176 Jy ! Component: 3450 - total flux cleaned = -0.0100657 Jy ! Component: 3500 - total flux cleaned = -0.0101929 Jy ! Component: 3550 - total flux cleaned = -0.0102245 Jy ! Component: 3600 - total flux cleaned = -0.010303 Jy ! Component: 3650 - total flux cleaned = -0.01035 Jy ! Component: 3700 - total flux cleaned = -0.0104743 Jy ! Component: 3750 - total flux cleaned = -0.0105205 Jy ! Component: 3800 - total flux cleaned = -0.0105665 Jy ! Component: 3850 - total flux cleaned = -0.0105971 Jy ! Component: 3900 - total flux cleaned = -0.0106427 Jy ! Component: 3950 - total flux cleaned = -0.0107032 Jy ! Component: 4000 - total flux cleaned = -0.0107183 Jy ! Component: 4050 - total flux cleaned = -0.010778 Jy ! Total flux subtracted in 4096 components = -0.010793 Jy ! Clean residual min=-0.000888 max=0.000911 Jy/beam ! Clean residual mean=-0.000003 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.27935 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 431 components and 0.27935 Jy ![Exited script file: muppet] wmap "J1746+6226_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.964 x 7.425 at 52.15 degrees (North through East) ! Clean map min=-0.0019773 max=0.22257 Jy/beam ! Writing clean map to FITS file: J1746+6226_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.222571 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262561 device "J1746+6226_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1746+6226_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.353902 0.353902 0.707803 1.41561 2.83121 5.66243 11.3249 22.6497 45.2994 90.5988 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.222 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.964 x 7.425 at 52.15 degrees (North through East) ! Clean map min=-0.0019773 max=0.22257 Jy/beam quit ! Quitting program ! Log file J1746+6226_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:59:57 2016