! Started logfile: J1700+0522_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:59:02 2016 obs J1700+0522_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1700+0522_S_2014_06_09_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683821 visibilities/baseline/integration-bin. ! Found source: J1700+0522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 7016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700+0522_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925448Jy sigma=0.010191 ! Fit after self-cal, rms=0.911816Jy sigma=0.010081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=8.077 mas, bpa=2.697 degrees ! Estimated noise=1048.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689031 Jy ! Component: 100 - total flux cleaned = 0.0847481 Jy ! Total flux subtracted in 100 components = 0.0847481 Jy ! Clean residual min=-0.003911 max=0.005742 Jy/beam ! Clean residual mean=-0.000006 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.0847481 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0847481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078716Jy sigma=0.000791 ! Fit after self-cal, rms=0.078712Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.057 mas, bmaj=9.167 mas, bpa=2.184 degrees ! Estimated noise=779.002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762995 Jy ! Component: 100 - total flux cleaned = 0.0110906 Jy ! Component: 150 - total flux cleaned = 0.0128991 Jy ! Component: 200 - total flux cleaned = 0.0138677 Jy ! Total flux subtracted in 200 components = 0.0138677 Jy ! Clean residual min=-0.003088 max=0.002655 Jy/beam ! Clean residual mean=0.000014 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0986158 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 44 components and 0.0986158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078016Jy sigma=0.000783 ! Fit after self-cal, rms=0.078053Jy sigma=0.000783 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.00 KP 1.05 ! LA 1.15 MK 1.03 NL 0.95 OV 1.04 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.98 KP 1.02 ! LA 1.13 MK 1.04 NL 1.00 OV 1.01 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.10 KP 0.93 ! LA 0.90 MK 1.12 NL 0.98 OV 0.95 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.97 KP 0.89 ! LA 0.89 MK 1.00 NL 1.04 OV 0.95 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.078053Jy sigma=0.000783 ! Fit after self-cal, rms=0.076667Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=9.203 mas, bpa=2.54 degrees ! Estimated noise=777.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418581 Jy ! Component: 100 - total flux cleaned = -0.000444878 Jy ! Component: 150 - total flux cleaned = -0.000422928 Jy ! Component: 200 - total flux cleaned = -0.000404519 Jy ! Total flux subtracted in 200 components = -0.000404519 Jy ! Clean residual min=-0.002560 max=0.002641 Jy/beam ! Clean residual mean=0.000014 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0982113 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 48 components and 0.0982113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076654Jy sigma=0.000776 ! Fit after self-cal, rms=0.076666Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076666Jy sigma=0.000776 ! Fit after self-cal, rms=0.076944Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=9.214 mas, bpa=2.643 degrees ! Estimated noise=776.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151634 Jy ! Component: 100 - total flux cleaned = -0.000237903 Jy ! Component: 150 - total flux cleaned = -0.000252158 Jy ! Component: 200 - total flux cleaned = -0.000275498 Jy ! Total flux subtracted in 200 components = -0.000275498 Jy ! Clean residual min=-0.002596 max=0.002476 Jy/beam ! Clean residual mean=0.000010 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0979358 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0979358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076937Jy sigma=0.000775 ! Fit after self-cal, rms=0.076948Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.62245e-05 Jy ! Component: 100 - total flux cleaned = -5.99347e-05 Jy ! Component: 150 - total flux cleaned = -5.94967e-05 Jy ! Component: 200 - total flux cleaned = -5.8975e-05 Jy ! Total flux subtracted in 200 components = -5.8975e-05 Jy ! Clean residual min=-0.002615 max=0.002484 Jy/beam ! Clean residual mean=0.000010 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0978768 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0978768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076944Jy sigma=0.000775 ! Fit after self-cal, rms=0.076942Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076942Jy sigma=0.000775 ! Fit after self-cal, rms=0.076984Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=9.217 mas, bpa=2.737 degrees ! Estimated noise=776.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011805 Jy ! Component: 100 - total flux cleaned = -0.000153613 Jy ! Component: 150 - total flux cleaned = -0.000182986 Jy ! Component: 200 - total flux cleaned = -0.000192003 Jy ! Total flux subtracted in 200 components = -0.000192003 Jy ! Clean residual min=-0.002612 max=0.002504 Jy/beam ! Clean residual mean=0.000010 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0976848 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.0976848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076981Jy sigma=0.000775 ! Fit after self-cal, rms=0.076983Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.97377e-06 Jy ! Component: 100 - total flux cleaned = 9.51973e-06 Jy ! Component: 150 - total flux cleaned = 9.40361e-06 Jy ! Component: 200 - total flux cleaned = 9.82298e-06 Jy ! Total flux subtracted in 200 components = 9.82298e-06 Jy ! Clean residual min=-0.002612 max=0.002512 Jy/beam ! Clean residual mean=0.000010 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0976946 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0976946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076981Jy sigma=0.000775 ! Fit after self-cal, rms=0.076980Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076980Jy sigma=0.000775 ! Fit after self-cal, rms=0.076972Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=13.89 mas, bpa=-7.806 degrees ! Estimated noise=881.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226912 Jy ! Component: 100 - total flux cleaned = 0.000197362 Jy ! Component: 150 - total flux cleaned = 0.000163175 Jy ! Component: 200 - total flux cleaned = 0.000145164 Jy ! Total flux subtracted in 200 components = 0.000145164 Jy ! Clean residual min=-0.002318 max=0.002641 Jy/beam ! Clean residual mean=0.000019 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0978398 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 69 components and 0.0978398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076972Jy sigma=0.000775 ! Fit after self-cal, rms=0.076972Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.08115e-05 Jy ! Component: 100 - total flux cleaned = 8.17438e-05 Jy ! Component: 150 - total flux cleaned = 6.55477e-05 Jy ! Component: 200 - total flux cleaned = 5.86028e-05 Jy ! Total flux subtracted in 200 components = 5.86028e-05 Jy ! Clean residual min=-0.002306 max=0.002626 Jy/beam ! Clean residual mean=0.000019 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0978984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.0978984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076973Jy sigma=0.000775 ! Fit after self-cal, rms=0.076972Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=9.219 mas, bpa=2.814 degrees ! Estimated noise=776.116 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 9.219 at 2.814 degrees (North through East) ! Clean map min=-0.0025098 max=0.090119 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=8.098 mas, bpa=3.331 degrees ! Estimated noise=1053.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0690635 Jy ! Component: 100 - total flux cleaned = 0.0853671 Jy ! Component: 150 - total flux cleaned = 0.0914132 Jy ! Component: 200 - total flux cleaned = 0.0944573 Jy ! Total flux subtracted in 200 components = 0.0944573 Jy ! Clean residual min=-0.003142 max=0.003528 Jy/beam ! Clean residual mean=0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0944573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0944573 Jy ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=9.219 mas, bpa=2.814 degrees ! Estimated noise=776.116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259819 Jy ! Component: 100 - total flux cleaned = 0.00312759 Jy ! Component: 150 - total flux cleaned = 0.00348463 Jy ! Component: 200 - total flux cleaned = 0.00359644 Jy ! Total flux subtracted in 200 components = 0.00359644 Jy ! Clean residual min=-0.002455 max=0.002492 Jy/beam ! Clean residual mean=0.000011 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0980538 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 57 components and 0.0980538 Jy ! Inverting map ! Added new window around map position (45.5, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167323 Jy ! Component: 100 - total flux cleaned = 0.00163062 Jy ! Component: 150 - total flux cleaned = 0.00166999 Jy ! Component: 200 - total flux cleaned = 0.00173977 Jy ! Total flux subtracted in 200 components = 0.00173977 Jy ! Clean residual min=-0.002348 max=0.002262 Jy/beam ! Clean residual mean=0.000009 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0997935 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.0997935 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=13.89 mas, bpa=-7.806 degrees ! Estimated noise=881.369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90073e-05 Jy ! Component: 100 - total flux cleaned = 0.000204994 Jy ! Component: 150 - total flux cleaned = 0.000223686 Jy ! Component: 200 - total flux cleaned = 0.000222692 Jy ! Total flux subtracted in 200 components = 0.000222692 Jy ! Clean residual min=-0.002524 max=0.002345 Jy/beam ! Clean residual mean=0.000015 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.100016 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96485e-05 Jy ! Component: 100 - total flux cleaned = -5.7811e-05 Jy ! Component: 150 - total flux cleaned = -0.000110997 Jy ! Component: 200 - total flux cleaned = -0.000161421 Jy ! Total flux subtracted in 200 components = -0.000161421 Jy ! Clean residual min=-0.002542 max=0.002344 Jy/beam ! Clean residual mean=0.000015 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0998548 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.0998548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=9.219 mas, bpa=2.814 degrees ! Estimated noise=776.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112479 Jy ! Component: 100 - total flux cleaned = -0.000200585 Jy ! Component: 150 - total flux cleaned = -0.000226456 Jy ! Component: 200 - total flux cleaned = -0.000250854 Jy ! Total flux subtracted in 200 components = -0.000250854 Jy ! Clean residual min=-0.002357 max=0.002268 Jy/beam ! Clean residual mean=0.000009 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.099604 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.099604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076844Jy sigma=0.000774 ! Fit after self-cal, rms=0.076832Jy sigma=0.000773 wmodel J1700+0522_S_2014_06_09_pus_map.mod ! Writing 121 model components to file: J1700+0522_S_2014_06_09_pus_map.mod wobs J1700+0522_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1700+0522_S_2014_06_09_pus_uvs.fits wwins J1700+0522_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1700+0522_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449722 Jy ! Component: 100 - total flux cleaned = -0.000868322 Jy ! Component: 150 - total flux cleaned = -0.00111955 Jy ! Component: 200 - total flux cleaned = -0.00126725 Jy ! Component: 250 - total flux cleaned = -0.00149187 Jy ! Component: 300 - total flux cleaned = -0.00165409 Jy ! Component: 350 - total flux cleaned = -0.00178376 Jy ! Component: 400 - total flux cleaned = -0.00193429 Jy ! Component: 450 - total flux cleaned = -0.00210452 Jy ! Component: 500 - total flux cleaned = -0.00224646 Jy ! Component: 550 - total flux cleaned = -0.00231581 Jy ! Component: 600 - total flux cleaned = -0.00249586 Jy ! Component: 650 - total flux cleaned = -0.00262728 Jy ! Component: 700 - total flux cleaned = -0.00269153 Jy ! Component: 750 - total flux cleaned = -0.00279631 Jy ! Component: 800 - total flux cleaned = -0.00279579 Jy ! Component: 850 - total flux cleaned = -0.00279559 Jy ! Component: 900 - total flux cleaned = -0.00279609 Jy ! Component: 950 - total flux cleaned = -0.00281581 Jy ! Component: 1000 - total flux cleaned = -0.00285409 Jy ! Component: 1050 - total flux cleaned = -0.00287282 Jy ! Component: 1100 - total flux cleaned = -0.00289113 Jy ! Component: 1150 - total flux cleaned = -0.00287263 Jy ! Component: 1200 - total flux cleaned = -0.00285444 Jy ! Component: 1250 - total flux cleaned = -0.00283646 Jy ! Component: 1300 - total flux cleaned = -0.00276682 Jy ! Component: 1350 - total flux cleaned = -0.00273235 Jy ! Component: 1400 - total flux cleaned = -0.00268146 Jy ! Component: 1450 - total flux cleaned = -0.00273152 Jy ! Component: 1500 - total flux cleaned = -0.00266526 Jy ! Component: 1550 - total flux cleaned = -0.00268156 Jy ! Component: 1600 - total flux cleaned = -0.00264902 Jy ! Component: 1650 - total flux cleaned = -0.00258518 Jy ! Component: 1700 - total flux cleaned = -0.00252227 Jy ! Component: 1750 - total flux cleaned = -0.00247567 Jy ! Component: 1800 - total flux cleaned = -0.00244511 Jy ! Component: 1850 - total flux cleaned = -0.00238447 Jy ! Component: 1900 - total flux cleaned = -0.00235427 Jy ! Component: 1950 - total flux cleaned = -0.00232427 Jy ! Component: 2000 - total flux cleaned = -0.00223618 Jy ! Component: 2050 - total flux cleaned = -0.0021782 Jy ! Component: 2100 - total flux cleaned = -0.00213501 Jy ! Component: 2150 - total flux cleaned = -0.00210637 Jy ! Component: 2200 - total flux cleaned = -0.00200765 Jy ! Component: 2250 - total flux cleaned = -0.00195183 Jy ! Component: 2300 - total flux cleaned = -0.00185518 Jy ! Component: 2350 - total flux cleaned = -0.00181423 Jy ! Component: 2400 - total flux cleaned = -0.00177362 Jy ! Component: 2450 - total flux cleaned = -0.00173337 Jy ! Component: 2500 - total flux cleaned = -0.00168016 Jy ! Component: 2550 - total flux cleaned = -0.00164083 Jy ! Component: 2600 - total flux cleaned = -0.00156265 Jy ! Component: 2650 - total flux cleaned = -0.00151094 Jy ! Component: 2700 - total flux cleaned = -0.00147256 Jy ! Component: 2750 - total flux cleaned = -0.00142179 Jy ! Component: 2800 - total flux cleaned = -0.00140927 Jy ! Component: 2850 - total flux cleaned = -0.00138417 Jy ! Component: 2900 - total flux cleaned = -0.00133452 Jy ! Component: 2950 - total flux cleaned = -0.00129777 Jy ! Component: 3000 - total flux cleaned = -0.00124907 Jy ! Component: 3050 - total flux cleaned = -0.00123699 Jy ! Component: 3100 - total flux cleaned = -0.00118923 Jy ! Component: 3150 - total flux cleaned = -0.00120113 Jy ! Component: 3200 - total flux cleaned = -0.00114231 Jy ! Component: 3250 - total flux cleaned = -0.00115402 Jy ! Component: 3300 - total flux cleaned = -0.00115412 Jy ! Component: 3350 - total flux cleaned = -0.00114262 Jy ! Component: 3400 - total flux cleaned = -0.00115402 Jy ! Component: 3450 - total flux cleaned = -0.00109763 Jy ! Component: 3500 - total flux cleaned = -0.00114251 Jy ! Component: 3550 - total flux cleaned = -0.00110919 Jy ! Component: 3600 - total flux cleaned = -0.00110929 Jy ! Component: 3650 - total flux cleaned = -0.00113118 Jy ! Component: 3700 - total flux cleaned = -0.00110946 Jy ! Component: 3750 - total flux cleaned = -0.00112033 Jy ! Component: 3800 - total flux cleaned = -0.00114181 Jy ! Component: 3850 - total flux cleaned = -0.0011312 Jy ! Component: 3900 - total flux cleaned = -0.00112065 Jy ! Component: 3950 - total flux cleaned = -0.00108917 Jy ! Component: 4000 - total flux cleaned = -0.00108921 Jy ! Component: 4050 - total flux cleaned = -0.00108918 Jy ! Total flux subtracted in 4096 components = -0.00108916 Jy ! Clean residual min=-0.000689 max=0.000609 Jy/beam ! Clean residual mean=0.000004 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.0985148 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 378 components and 0.0985147 Jy ![Exited script file: muppet] wmap "J1700+0522_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 9.219 at 2.814 degrees (North through East) ! Clean map min=-0.0018382 max=0.088976 Jy/beam ! Writing clean map to FITS file: J1700+0522_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0889755 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189366 device "J1700+0522_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1700+0522_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.638489 0.638489 1.27698 2.55395 5.10791 10.2158 20.4316 40.8633 81.7265 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 9.219 at 2.814 degrees (North through East) ! Clean map min=-0.0018382 max=0.088976 Jy/beam quit ! Quitting program ! Log file J1700+0522_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:59:07 2016