! Started logfile: J1414+4554_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:55:38 2016 obs J1414+4554_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1414+4554_S_2014_06_09_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779928 visibilities/baseline/integration-bin. ! Found source: J1414+4554 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1414+4554_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938881Jy sigma=0.011333 ! Fit after self-cal, rms=0.891830Jy sigma=0.010779 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=4.01 mas, bpa=-23.43 degrees ! Estimated noise=873.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079262 Jy ! Component: 100 - total flux cleaned = 0.112236 Jy ! Total flux subtracted in 100 components = 0.112236 Jy ! Clean residual min=-0.016422 max=0.054547 Jy/beam ! Clean residual mean=-0.000143 rms=0.005235 Jy/beam ! Combined flux in latest and established models = 0.112236 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.112236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129684Jy sigma=0.001560 ! Fit after self-cal, rms=0.128952Jy sigma=0.001555 ! Inverting map ! Added new window around map position (4.5, -27). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477835 Jy ! Component: 100 - total flux cleaned = 0.0726786 Jy ! Total flux subtracted in 100 components = 0.0726786 Jy ! Clean residual min=-0.010937 max=0.017821 Jy/beam ! Clean residual mean=-0.000081 rms=0.003283 Jy/beam ! Combined flux in latest and established models = 0.184915 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.184915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104197Jy sigma=0.001215 ! Fit after self-cal, rms=0.096489Jy sigma=0.001136 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291113 Jy ! Component: 100 - total flux cleaned = 0.0475938 Jy ! Total flux subtracted in 100 components = 0.0475938 Jy ! Clean residual min=-0.007020 max=0.015593 Jy/beam ! Clean residual mean=-0.000047 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.232509 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 70 components and 0.232509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083167Jy sigma=0.000954 ! Fit after self-cal, rms=0.082423Jy sigma=0.000946 ! Inverting map ! Added new window around map position (0.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168252 Jy ! Component: 100 - total flux cleaned = 0.0287307 Jy ! Total flux subtracted in 100 components = 0.0287307 Jy ! Clean residual min=-0.005759 max=0.008436 Jy/beam ! Clean residual mean=-0.000025 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.261239 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.261239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076703Jy sigma=0.000868 ! Fit after self-cal, rms=0.076566Jy sigma=0.000867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=4.952 mas, bpa=-12.65 degrees ! Estimated noise=446.708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156762 Jy ! Component: 100 - total flux cleaned = 0.0264628 Jy ! Component: 150 - total flux cleaned = 0.0343687 Jy ! Component: 200 - total flux cleaned = 0.0402877 Jy ! Total flux subtracted in 200 components = 0.0402877 Jy ! Clean residual min=-0.003930 max=0.006284 Jy/beam ! Clean residual mean=-0.000004 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.301527 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 116 components and 0.301527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072404Jy sigma=0.000814 ! Fit after self-cal, rms=0.072332Jy sigma=0.000813 ! Inverting map ! Added new window around map position (5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604208 Jy ! Component: 100 - total flux cleaned = 0.00989001 Jy ! Component: 150 - total flux cleaned = 0.0128957 Jy ! Component: 200 - total flux cleaned = 0.0152626 Jy ! Total flux subtracted in 200 components = 0.0152626 Jy ! Clean residual min=-0.003560 max=0.003551 Jy/beam ! Clean residual mean=0.000006 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.31679 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 0.31679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071616Jy sigma=0.000806 ! Fit after self-cal, rms=0.071576Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.98 KP 1.05 ! LA 1.16 MK 1.07 NL 0.97 OV 0.95 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00 KP 1.02 ! LA 1.12 MK 1.23 NL 1.09 OV 1.00 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.03 KP 0.92 ! LA 0.90 MK 1.09 NL 1.08 OV 0.93 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 0.89 ! LA 0.88 MK 1.06 NL 1.07 OV 1.00 ! PT 1.03 SC 0.92 ! ! ! Fit before self-cal, rms=0.071576Jy sigma=0.000805 ! Fit after self-cal, rms=0.069400Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.115 mas, bmaj=4.995 mas, bpa=-9.62 degrees ! Estimated noise=450.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167719 Jy ! Component: 100 - total flux cleaned = 0.000226272 Jy ! Component: 150 - total flux cleaned = 0.000376488 Jy ! Component: 200 - total flux cleaned = 0.000459985 Jy ! Total flux subtracted in 200 components = 0.000459985 Jy ! Clean residual min=-0.001660 max=0.001926 Jy/beam ! Clean residual mean=0.000000 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.31725 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.31725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069291Jy sigma=0.000773 ! Fit after self-cal, rms=0.069290Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069290Jy sigma=0.000772 ! Fit after self-cal, rms=0.070887Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.154 mas, bmaj=5.021 mas, bpa=-7.327 degrees ! Estimated noise=453.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562379 Jy ! Component: 100 - total flux cleaned = 0.000526587 Jy ! Component: 150 - total flux cleaned = 0.000558346 Jy ! Component: 200 - total flux cleaned = 0.000559177 Jy ! Total flux subtracted in 200 components = 0.000559177 Jy ! Clean residual min=-0.001373 max=0.001723 Jy/beam ! Clean residual mean=-0.000000 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.317809 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 167 components and 0.317809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070848Jy sigma=0.000770 ! Fit after self-cal, rms=0.070846Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157068 Jy ! Component: 100 - total flux cleaned = 0.00181427 Jy ! Component: 150 - total flux cleaned = 0.00188508 Jy ! Component: 200 - total flux cleaned = 0.00188504 Jy ! Total flux subtracted in 200 components = 0.00188504 Jy ! Clean residual min=-0.001335 max=0.001350 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.319694 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 180 components and 0.319694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070790Jy sigma=0.000769 ! Fit after self-cal, rms=0.070782Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070782Jy sigma=0.000769 ! Fit after self-cal, rms=0.070763Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=5.022 mas, bpa=-7.528 degrees ! Estimated noise=453.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083406 Jy ! Component: 100 - total flux cleaned = 0.00109397 Jy ! Component: 150 - total flux cleaned = 0.00116989 Jy ! Component: 200 - total flux cleaned = 0.00117037 Jy ! Total flux subtracted in 200 components = 0.00117037 Jy ! Clean residual min=-0.001174 max=0.001314 Jy/beam ! Clean residual mean=0.000000 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.320864 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 187 components and 0.320864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070739Jy sigma=0.000769 ! Fit after self-cal, rms=0.070734Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-73, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070705 Jy ! Component: 100 - total flux cleaned = 0.000797056 Jy ! Component: 150 - total flux cleaned = 0.000902278 Jy ! Component: 200 - total flux cleaned = 0.000972091 Jy ! Total flux subtracted in 200 components = 0.000972091 Jy ! Clean residual min=-0.001219 max=0.001085 Jy/beam ! Clean residual mean=0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.321836 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 204 components and 0.321836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070703Jy sigma=0.000769 ! Fit after self-cal, rms=0.070700Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070700Jy sigma=0.000769 ! Fit after self-cal, rms=0.070592Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.505 mas, bpa=-8.351 degrees ! Estimated noise=539.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368042 Jy ! Component: 100 - total flux cleaned = 0.000498152 Jy ! Component: 150 - total flux cleaned = 0.000612608 Jy ! Component: 200 - total flux cleaned = 0.000677512 Jy ! Total flux subtracted in 200 components = 0.000677512 Jy ! Clean residual min=-0.000923 max=0.000863 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.322514 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 233 components and 0.322514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070587Jy sigma=0.000769 ! Fit after self-cal, rms=0.070586Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.64981e-05 Jy ! Component: 100 - total flux cleaned = 0.000144417 Jy ! Component: 150 - total flux cleaned = 0.000217198 Jy ! Component: 200 - total flux cleaned = 0.000283639 Jy ! Total flux subtracted in 200 components = 0.000283639 Jy ! Clean residual min=-0.000892 max=0.000863 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.322798 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 246 components and 0.322798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070585Jy sigma=0.000769 ! Fit after self-cal, rms=0.070585Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.148 mas, bmaj=5.023 mas, bpa=-7.811 degrees ! Estimated noise=453.066 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.148 x 5.023 at -7.811 degrees (North through East) ! Clean map min=-0.0011068 max=0.10697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=4.02 mas, bpa=-20.96 degrees ! Estimated noise=890.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091595 Jy ! Component: 100 - total flux cleaned = 0.144987 Jy ! Component: 150 - total flux cleaned = 0.179973 Jy ! Component: 200 - total flux cleaned = 0.206375 Jy ! Total flux subtracted in 200 components = 0.206375 Jy ! Clean residual min=-0.008052 max=0.015406 Jy/beam ! Clean residual mean=-0.000085 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.206375 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.206375 Jy ! Inverting map and beam ! Estimated beam: bmin=4.148 mas, bmaj=5.023 mas, bpa=-7.811 degrees ! Estimated noise=453.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321365 Jy ! Component: 100 - total flux cleaned = 0.0538205 Jy ! Component: 150 - total flux cleaned = 0.0690434 Jy ! Component: 200 - total flux cleaned = 0.0799272 Jy ! Total flux subtracted in 200 components = 0.0799272 Jy ! Clean residual min=-0.003276 max=0.006134 Jy/beam ! Clean residual mean=-0.000026 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.286302 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 82 components and 0.286302 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797701 Jy ! Component: 100 - total flux cleaned = 0.0139199 Jy ! Component: 150 - total flux cleaned = 0.0184177 Jy ! Component: 200 - total flux cleaned = 0.021873 Jy ! Total flux subtracted in 200 components = 0.021873 Jy ! Clean residual min=-0.001884 max=0.002291 Jy/beam ! Clean residual mean=-0.000010 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.308175 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 128 components and 0.308176 Jy ! Inverting map ! Added new window around map position (-4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274569 Jy ! Component: 100 - total flux cleaned = 0.00488132 Jy ! Component: 150 - total flux cleaned = 0.00662263 Jy ! Component: 200 - total flux cleaned = 0.00808199 Jy ! Total flux subtracted in 200 components = 0.00808199 Jy ! Clean residual min=-0.001513 max=0.001248 Jy/beam ! Clean residual mean=-0.000005 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.316258 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 158 components and 0.316258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=9.505 mas, bpa=-8.351 degrees ! Estimated noise=539.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186887 Jy ! Component: 100 - total flux cleaned = 0.00316481 Jy ! Component: 150 - total flux cleaned = 0.00397167 Jy ! Component: 200 - total flux cleaned = 0.0044621 Jy ! Total flux subtracted in 200 components = 0.0044621 Jy ! Clean residual min=-0.001043 max=0.001009 Jy/beam ! Clean residual mean=-0.000005 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.32072 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041117 Jy ! Component: 100 - total flux cleaned = 0.00075778 Jy ! Component: 150 - total flux cleaned = 0.00107262 Jy ! Component: 200 - total flux cleaned = 0.00130981 Jy ! Total flux subtracted in 200 components = 0.00130981 Jy ! Clean residual min=-0.000946 max=0.000950 Jy/beam ! Clean residual mean=-0.000003 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.32203 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 238 components and 0.322029 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.148 mas, bmaj=5.023 mas, bpa=-7.811 degrees ! Estimated noise=453.066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211124 Jy ! Component: 100 - total flux cleaned = -0.000111228 Jy ! Component: 150 - total flux cleaned = 3.88727e-06 Jy ! Component: 200 - total flux cleaned = 0.000128719 Jy ! Total flux subtracted in 200 components = 0.000128719 Jy ! Clean residual min=-0.001218 max=0.001132 Jy/beam ! Clean residual mean=-0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.322158 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 261 components and 0.322158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070567Jy sigma=0.000769 ! Fit after self-cal, rms=0.070548Jy sigma=0.000768 wmodel J1414+4554_S_2014_06_09_pus_map.mod ! Writing 261 model components to file: J1414+4554_S_2014_06_09_pus_map.mod wobs J1414+4554_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1414+4554_S_2014_06_09_pus_uvs.fits wwins J1414+4554_S_2014_06_09_pus_map.win ! wwins: Wrote 7 windows to J1414+4554_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.69005e-05 Jy ! Component: 100 - total flux cleaned = -3.67785e-05 Jy ! Component: 150 - total flux cleaned = -0.00014431 Jy ! Component: 200 - total flux cleaned = -0.000265637 Jy ! Component: 250 - total flux cleaned = -0.000349869 Jy ! Component: 300 - total flux cleaned = -0.000464736 Jy ! Component: 350 - total flux cleaned = -0.000560974 Jy ! Component: 400 - total flux cleaned = -0.000686998 Jy ! Component: 450 - total flux cleaned = -0.000794944 Jy ! Component: 500 - total flux cleaned = -0.000840237 Jy ! Component: 550 - total flux cleaned = -0.000944768 Jy ! Component: 600 - total flux cleaned = -0.000988827 Jy ! Component: 650 - total flux cleaned = -0.00104653 Jy ! Component: 700 - total flux cleaned = -0.00107492 Jy ! Component: 750 - total flux cleaned = -0.00108911 Jy ! Component: 800 - total flux cleaned = -0.00113084 Jy ! Component: 850 - total flux cleaned = -0.00115833 Jy ! Component: 900 - total flux cleaned = -0.00123965 Jy ! Component: 950 - total flux cleaned = -0.00129327 Jy ! Component: 1000 - total flux cleaned = -0.00134619 Jy ! Component: 1050 - total flux cleaned = -0.00142463 Jy ! Component: 1100 - total flux cleaned = -0.00147639 Jy ! Component: 1150 - total flux cleaned = -0.00151463 Jy ! Component: 1200 - total flux cleaned = -0.0015273 Jy ! Component: 1250 - total flux cleaned = -0.00155216 Jy ! Component: 1300 - total flux cleaned = -0.00155199 Jy ! Component: 1350 - total flux cleaned = -0.00158868 Jy ! Component: 1400 - total flux cleaned = -0.00155222 Jy ! Component: 1450 - total flux cleaned = -0.00158846 Jy ! Component: 1500 - total flux cleaned = -0.00161215 Jy ! Component: 1550 - total flux cleaned = -0.00163586 Jy ! Component: 1600 - total flux cleaned = -0.00164744 Jy ! Component: 1650 - total flux cleaned = -0.00165905 Jy ! Component: 1700 - total flux cleaned = -0.00169331 Jy ! Component: 1750 - total flux cleaned = -0.0016478 Jy ! Component: 1800 - total flux cleaned = -0.00170408 Jy ! Component: 1850 - total flux cleaned = -0.00165921 Jy ! Component: 1900 - total flux cleaned = -0.00169255 Jy ! Component: 1950 - total flux cleaned = -0.00169253 Jy ! Component: 2000 - total flux cleaned = -0.00169257 Jy ! Component: 2050 - total flux cleaned = -0.00173583 Jy ! Component: 2100 - total flux cleaned = -0.00172524 Jy ! Component: 2150 - total flux cleaned = -0.0017466 Jy ! Component: 2200 - total flux cleaned = -0.00178867 Jy ! Component: 2250 - total flux cleaned = -0.00177807 Jy ! Component: 2300 - total flux cleaned = -0.00181971 Jy ! Component: 2350 - total flux cleaned = -0.00181966 Jy ! Component: 2400 - total flux cleaned = -0.00186073 Jy ! Component: 2450 - total flux cleaned = -0.00186066 Jy ! Component: 2500 - total flux cleaned = -0.00188083 Jy ! Component: 2550 - total flux cleaned = -0.00189096 Jy ! Component: 2600 - total flux cleaned = -0.00194093 Jy ! Component: 2650 - total flux cleaned = -0.00200036 Jy ! Component: 2700 - total flux cleaned = -0.00201988 Jy ! Component: 2750 - total flux cleaned = -0.00201993 Jy ! Component: 2800 - total flux cleaned = -0.00205873 Jy ! Component: 2850 - total flux cleaned = -0.00207799 Jy ! Component: 2900 - total flux cleaned = -0.00209711 Jy ! Component: 2950 - total flux cleaned = -0.00212569 Jy ! Component: 3000 - total flux cleaned = -0.00213514 Jy ! Component: 3050 - total flux cleaned = -0.00215395 Jy ! Component: 3100 - total flux cleaned = -0.00219125 Jy ! Component: 3150 - total flux cleaned = -0.00221913 Jy ! Component: 3200 - total flux cleaned = -0.0022467 Jy ! Component: 3250 - total flux cleaned = -0.00220996 Jy ! Component: 3300 - total flux cleaned = -0.00226473 Jy ! Component: 3350 - total flux cleaned = -0.00224667 Jy ! Component: 3400 - total flux cleaned = -0.00223765 Jy ! Component: 3450 - total flux cleaned = -0.00221977 Jy ! Component: 3500 - total flux cleaned = -0.00223767 Jy ! Component: 3550 - total flux cleaned = -0.00228188 Jy ! Component: 3600 - total flux cleaned = -0.00223784 Jy ! Component: 3650 - total flux cleaned = -0.00226414 Jy ! Component: 3700 - total flux cleaned = -0.00223794 Jy ! Component: 3750 - total flux cleaned = -0.0022812 Jy ! Component: 3800 - total flux cleaned = -0.00227247 Jy ! Component: 3850 - total flux cleaned = -0.00228954 Jy ! Component: 3900 - total flux cleaned = -0.00225543 Jy ! Component: 3950 - total flux cleaned = -0.00225543 Jy ! Component: 4000 - total flux cleaned = -0.00225537 Jy ! Component: 4050 - total flux cleaned = -0.00226379 Jy ! Total flux subtracted in 4096 components = -0.00230552 Jy ! Clean residual min=-0.000656 max=0.000496 Jy/beam ! Clean residual mean=0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.319852 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 500 components and 0.319852 Jy ![Exited script file: muppet] wmap "J1414+4554_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.148 x 5.023 at -7.811 degrees (North through East) ! Clean map min=-0.0010912 max=0.10606 Jy/beam ! Writing clean map to FITS file: J1414+4554_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106063 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141729 device "J1414+4554_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1414+4554_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400883 0.400883 0.801765 1.60353 3.20706 6.41412 12.8282 25.6565 51.313 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.148 x 5.023 at -7.811 degrees (North through East) ! Clean map min=-0.0010912 max=0.10606 Jy/beam quit ! Quitting program ! Log file J1414+4554_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:55:44 2016