! Started logfile: J1332+0200_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:54:58 2016 obs J1332+0200_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1332+0200_S_2014_06_09_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.671914 visibilities/baseline/integration-bin. ! Found source: J1332+0200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1332+0200_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.767434Jy sigma=0.008828 ! Fit after self-cal, rms=0.737825Jy sigma=0.008454 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.552 mas, bpa=-5.295 degrees ! Estimated noise=821.495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194555 Jy ! Component: 100 - total flux cleaned = 0.251679 Jy ! Total flux subtracted in 100 components = 0.251679 Jy ! Clean residual min=-0.010540 max=0.025909 Jy/beam ! Clean residual mean=0.000025 rms=0.003110 Jy/beam ! Combined flux in latest and established models = 0.251679 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.251679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093917Jy sigma=0.001018 ! Fit after self-cal, rms=0.093887Jy sigma=0.001017 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291408 Jy ! Component: 100 - total flux cleaned = 0.0447755 Jy ! Total flux subtracted in 100 components = 0.0447755 Jy ! Clean residual min=-0.005859 max=0.010211 Jy/beam ! Clean residual mean=0.000008 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.296455 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.296455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081825Jy sigma=0.000880 ! Fit after self-cal, rms=0.081796Jy sigma=0.000879 ! Inverting map ! Added new window around map position (-4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108188 Jy ! Component: 100 - total flux cleaned = 0.0175171 Jy ! Total flux subtracted in 100 components = 0.0175171 Jy ! Clean residual min=-0.004953 max=0.004929 Jy/beam ! Clean residual mean=0.000001 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.313972 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.313972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079731Jy sigma=0.000861 ! Fit after self-cal, rms=0.079688Jy sigma=0.000861 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=8.493 mas, bpa=-4.669 degrees ! Estimated noise=670.387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599501 Jy ! Component: 100 - total flux cleaned = 0.00914832 Jy ! Component: 150 - total flux cleaned = 0.0111093 Jy ! Component: 200 - total flux cleaned = 0.0118251 Jy ! Total flux subtracted in 200 components = 0.0118251 Jy ! Clean residual min=-0.005489 max=0.004521 Jy/beam ! Clean residual mean=-0.000005 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.325797 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.325797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079065Jy sigma=0.000858 ! Fit after self-cal, rms=0.079049Jy sigma=0.000858 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.97 KP 1.08 ! LA 1.20 MK 1.01 NL 0.96 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.02 ! LA 1.13 MK 0.99 NL 1.03 OV 1.03 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.02 KP 0.89 ! LA 0.88 MK 1.06 NL 1.00 OV 0.95 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00 KP 0.87 ! LA 0.86 MK 1.01 NL 1.03 OV 1.00 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.079049Jy sigma=0.000858 ! Fit after self-cal, rms=0.071643Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.504 mas, bpa=-4.518 degrees ! Estimated noise=669.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000685322 Jy ! Component: 100 - total flux cleaned = -0.000839635 Jy ! Component: 150 - total flux cleaned = -0.000883141 Jy ! Component: 200 - total flux cleaned = -0.000924057 Jy ! Total flux subtracted in 200 components = -0.000924057 Jy ! Clean residual min=-0.002982 max=0.003030 Jy/beam ! Clean residual mean=-0.000000 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.324873 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.324873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071622Jy sigma=0.000782 ! Fit after self-cal, rms=0.071607Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071607Jy sigma=0.000782 ! Fit after self-cal, rms=0.071494Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=8.507 mas, bpa=-4.488 degrees ! Estimated noise=668.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292526 Jy ! Component: 100 - total flux cleaned = -0.000341371 Jy ! Component: 150 - total flux cleaned = -0.000361706 Jy ! Component: 200 - total flux cleaned = -0.000381121 Jy ! Total flux subtracted in 200 components = -0.000381121 Jy ! Clean residual min=-0.002749 max=0.003330 Jy/beam ! Clean residual mean=-0.000001 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.324492 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.324492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071479Jy sigma=0.000779 ! Fit after self-cal, rms=0.071480Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332415 Jy ! Component: 100 - total flux cleaned = 0.00510178 Jy ! Component: 150 - total flux cleaned = 0.00610666 Jy ! Component: 200 - total flux cleaned = 0.00635849 Jy ! Total flux subtracted in 200 components = 0.00635849 Jy ! Clean residual min=-0.002233 max=0.002525 Jy/beam ! Clean residual mean=0.000002 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.33085 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 101 components and 0.33085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071340Jy sigma=0.000777 ! Fit after self-cal, rms=0.071331Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071331Jy sigma=0.000777 ! Fit after self-cal, rms=0.071369Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.516 mas, bpa=-4.495 degrees ! Estimated noise=668.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108309 Jy ! Component: 100 - total flux cleaned = 0.00127431 Jy ! Component: 150 - total flux cleaned = 0.00135522 Jy ! Component: 200 - total flux cleaned = 0.00140332 Jy ! Total flux subtracted in 200 components = 0.00140332 Jy ! Clean residual min=-0.002271 max=0.002454 Jy/beam ! Clean residual mean=0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.332254 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.332254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071341Jy sigma=0.000776 ! Fit after self-cal, rms=0.071343Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022354 Jy ! Component: 100 - total flux cleaned = 0.00024622 Jy ! Component: 150 - total flux cleaned = 0.000266288 Jy ! Component: 200 - total flux cleaned = 0.000285564 Jy ! Total flux subtracted in 200 components = 0.000285564 Jy ! Clean residual min=-0.002295 max=0.002463 Jy/beam ! Clean residual mean=0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.332539 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.332539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071331Jy sigma=0.000776 ! Fit after self-cal, rms=0.071330Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071330Jy sigma=0.000776 ! Fit after self-cal, rms=0.071364Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.419 mas, bmaj=14.65 mas, bpa=-9.892 degrees ! Estimated noise=820.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663924 Jy ! Component: 100 - total flux cleaned = 0.000914073 Jy ! Component: 150 - total flux cleaned = 0.000914781 Jy ! Component: 200 - total flux cleaned = 0.000956376 Jy ! Total flux subtracted in 200 components = 0.000956376 Jy ! Clean residual min=-0.003171 max=0.002921 Jy/beam ! Clean residual mean=0.000003 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.333495 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 131 components and 0.333495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071364Jy sigma=0.000776 ! Fit after self-cal, rms=0.071365Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10104e-05 Jy ! Component: 100 - total flux cleaned = 6.00024e-05 Jy ! Component: 150 - total flux cleaned = 9.35392e-05 Jy ! Component: 200 - total flux cleaned = 0.000141946 Jy ! Total flux subtracted in 200 components = 0.000141946 Jy ! Clean residual min=-0.003164 max=0.002948 Jy/beam ! Clean residual mean=0.000003 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.333637 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.333637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071368Jy sigma=0.000776 ! Fit after self-cal, rms=0.071368Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.52 mas, bpa=-4.503 degrees ! Estimated noise=668.206 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 8.52 at -4.503 degrees (North through East) ! Clean map min=-0.002171 max=0.26214 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.555 mas, bpa=-5.06 degrees ! Estimated noise=818.053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193648 Jy ! Component: 100 - total flux cleaned = 0.249971 Jy ! Component: 150 - total flux cleaned = 0.278338 Jy ! Component: 200 - total flux cleaned = 0.293932 Jy ! Total flux subtracted in 200 components = 0.293932 Jy ! Clean residual min=-0.004252 max=0.008098 Jy/beam ! Clean residual mean=0.000008 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.293932 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.293932 Jy ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.52 mas, bpa=-4.503 degrees ! Estimated noise=668.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134593 Jy ! Component: 100 - total flux cleaned = 0.0204955 Jy ! Component: 150 - total flux cleaned = 0.0251432 Jy ! Component: 200 - total flux cleaned = 0.0284896 Jy ! Total flux subtracted in 200 components = 0.0284896 Jy ! Clean residual min=-0.002837 max=0.002955 Jy/beam ! Clean residual mean=0.000004 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.322422 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.322422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.419 mas, bmaj=14.65 mas, bpa=-9.892 degrees ! Estimated noise=820.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041058 Jy ! Component: 100 - total flux cleaned = 0.00660821 Jy ! Component: 150 - total flux cleaned = 0.00830637 Jy ! Component: 200 - total flux cleaned = 0.00951305 Jy ! Total flux subtracted in 200 components = 0.00951305 Jy ! Clean residual min=-0.003342 max=0.002909 Jy/beam ! Clean residual mean=0.000003 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.331935 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481633 Jy ! Component: 100 - total flux cleaned = 0.00081313 Jy ! Component: 150 - total flux cleaned = 0.00106654 Jy ! Component: 200 - total flux cleaned = 0.00113184 Jy ! Total flux subtracted in 200 components = 0.00113184 Jy ! Clean residual min=-0.003231 max=0.002918 Jy/beam ! Clean residual mean=0.000003 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.333067 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 91 components and 0.333067 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.52 mas, bpa=-4.503 degrees ! Estimated noise=668.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550881 Jy ! Component: 100 - total flux cleaned = -0.000293474 Jy ! Component: 150 - total flux cleaned = -0.000218795 Jy ! Component: 200 - total flux cleaned = -0.000217709 Jy ! Total flux subtracted in 200 components = -0.000217709 Jy ! Clean residual min=-0.002387 max=0.002389 Jy/beam ! Clean residual mean=0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.332849 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.332849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071400Jy sigma=0.000776 ! Fit after self-cal, rms=0.071391Jy sigma=0.000776 wmodel J1332+0200_S_2014_06_09_pus_map.mod ! Writing 105 model components to file: J1332+0200_S_2014_06_09_pus_map.mod wobs J1332+0200_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1332+0200_S_2014_06_09_pus_uvs.fits wwins J1332+0200_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1332+0200_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362956 Jy ! Component: 100 - total flux cleaned = 0.000487956 Jy ! Component: 150 - total flux cleaned = 0.000450249 Jy ! Component: 200 - total flux cleaned = 0.000450042 Jy ! Component: 250 - total flux cleaned = 0.00052135 Jy ! Component: 300 - total flux cleaned = 0.000520606 Jy ! Component: 350 - total flux cleaned = 0.000520404 Jy ! Component: 400 - total flux cleaned = 0.000519687 Jy ! Component: 450 - total flux cleaned = 0.000488027 Jy ! Component: 500 - total flux cleaned = 0.000398762 Jy ! Component: 550 - total flux cleaned = 0.000225676 Jy ! Component: 600 - total flux cleaned = 0.000198025 Jy ! Component: 650 - total flux cleaned = 0.000170112 Jy ! Component: 700 - total flux cleaned = 6.35812e-05 Jy ! Component: 750 - total flux cleaned = 8.989e-05 Jy ! Component: 800 - total flux cleaned = 1.31076e-05 Jy ! Component: 850 - total flux cleaned = 3.77171e-05 Jy ! Component: 900 - total flux cleaned = 6.14681e-05 Jy ! Component: 950 - total flux cleaned = 3.77765e-05 Jy ! Component: 1000 - total flux cleaned = 3.78547e-05 Jy ! Component: 1050 - total flux cleaned = 8.36157e-05 Jy ! Component: 1100 - total flux cleaned = 8.39024e-05 Jy ! Component: 1150 - total flux cleaned = 0.000149727 Jy ! Component: 1200 - total flux cleaned = 0.00019286 Jy ! Component: 1250 - total flux cleaned = 0.000192754 Jy ! Component: 1300 - total flux cleaned = 0.000192841 Jy ! Component: 1350 - total flux cleaned = 0.000172076 Jy ! Component: 1400 - total flux cleaned = 0.000192575 Jy ! Component: 1450 - total flux cleaned = 0.00015295 Jy ! Component: 1500 - total flux cleaned = 0.000153291 Jy ! Component: 1550 - total flux cleaned = 0.000114798 Jy ! Component: 1600 - total flux cleaned = 0.000191111 Jy ! Component: 1650 - total flux cleaned = 0.000171977 Jy ! Component: 1700 - total flux cleaned = 0.000208824 Jy ! Component: 1750 - total flux cleaned = 0.000263377 Jy ! Component: 1800 - total flux cleaned = 0.00024503 Jy ! Component: 1850 - total flux cleaned = 0.000263399 Jy ! Component: 1900 - total flux cleaned = 0.00024616 Jy ! Component: 1950 - total flux cleaned = 0.000298898 Jy ! Component: 2000 - total flux cleaned = 0.000402288 Jy ! Component: 2050 - total flux cleaned = 0.000367929 Jy ! Component: 2100 - total flux cleaned = 0.000418322 Jy ! Component: 2150 - total flux cleaned = 0.000451547 Jy ! Component: 2200 - total flux cleaned = 0.000500838 Jy ! Component: 2250 - total flux cleaned = 0.000484711 Jy ! Component: 2300 - total flux cleaned = 0.000581708 Jy ! Component: 2350 - total flux cleaned = 0.000645528 Jy ! Component: 2400 - total flux cleaned = 0.000661074 Jy ! Component: 2450 - total flux cleaned = 0.000598489 Jy ! Component: 2500 - total flux cleaned = 0.000675988 Jy ! Component: 2550 - total flux cleaned = 0.000676016 Jy ! Component: 2600 - total flux cleaned = 0.000600309 Jy ! Component: 2650 - total flux cleaned = 0.000720659 Jy ! Component: 2700 - total flux cleaned = 0.000765232 Jy ! Component: 2750 - total flux cleaned = 0.000735833 Jy ! Component: 2800 - total flux cleaned = 0.000765054 Jy ! Component: 2850 - total flux cleaned = 0.000794027 Jy ! Component: 2900 - total flux cleaned = 0.000808281 Jy ! Component: 2950 - total flux cleaned = 0.000893563 Jy ! Component: 3000 - total flux cleaned = 0.000851316 Jy ! Component: 3050 - total flux cleaned = 0.000851469 Jy ! Component: 3100 - total flux cleaned = 0.000893177 Jy ! Component: 3150 - total flux cleaned = 0.000934484 Jy ! Component: 3200 - total flux cleaned = 0.00093441 Jy ! Component: 3250 - total flux cleaned = 0.000988278 Jy ! Component: 3300 - total flux cleaned = 0.000921283 Jy ! Component: 3350 - total flux cleaned = 0.000961102 Jy ! Component: 3400 - total flux cleaned = 0.00102676 Jy ! Component: 3450 - total flux cleaned = 0.00100067 Jy ! Component: 3500 - total flux cleaned = 0.00105247 Jy ! Component: 3550 - total flux cleaned = 0.00105254 Jy ! Component: 3600 - total flux cleaned = 0.00109079 Jy ! Component: 3650 - total flux cleaned = 0.00115393 Jy ! Component: 3700 - total flux cleaned = 0.00120405 Jy ! Component: 3750 - total flux cleaned = 0.00122882 Jy ! Component: 3800 - total flux cleaned = 0.00127801 Jy ! Component: 3850 - total flux cleaned = 0.0012781 Jy ! Component: 3900 - total flux cleaned = 0.00135082 Jy ! Component: 3950 - total flux cleaned = 0.00137487 Jy ! Component: 4000 - total flux cleaned = 0.00141082 Jy ! Component: 4050 - total flux cleaned = 0.00143455 Jy ! Total flux subtracted in 4096 components = 0.00145803 Jy ! Clean residual min=-0.000621 max=0.000844 Jy/beam ! Clean residual mean=0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.334307 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 401 components and 0.334307 Jy ![Exited script file: muppet] wmap "J1332+0200_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 8.52 at -4.503 degrees (North through East) ! Clean map min=-0.0013029 max=0.26288 Jy/beam ! Writing clean map to FITS file: J1332+0200_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207984 device "J1332+0200_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1332+0200_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237351 0.237351 0.474701 0.949403 1.89881 3.79761 7.59522 15.1904 30.3809 60.7618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 8.52 at -4.503 degrees (North through East) ! Clean map min=-0.0013029 max=0.26288 Jy/beam quit ! Quitting program ! Log file J1332+0200_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:55:03 2016