! Started logfile: J1254+1141_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:54:01 2016 obs J1254+1141_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1254+1141_S_2014_06_09_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.726797 visibilities/baseline/integration-bin. ! Found source: J1254+1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 2224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+1141_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.405561Jy sigma=0.004829 ! Fit after self-cal, rms=0.400973Jy sigma=0.004773 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=7.574 mas, bpa=-0.01361 degrees ! Estimated noise=1461.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.464473 Jy ! Component: 100 - total flux cleaned = 0.584976 Jy ! Total flux subtracted in 100 components = 0.584976 Jy ! Clean residual min=-0.029520 max=0.051190 Jy/beam ! Clean residual mean=0.000051 rms=0.008632 Jy/beam ! Combined flux in latest and established models = 0.584976 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.584976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150652Jy sigma=0.001676 ! Fit after self-cal, rms=0.150664Jy sigma=0.001676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=8.657 mas, bpa=-0.3211 degrees ! Estimated noise=1275.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0730844 Jy ! Component: 100 - total flux cleaned = 0.107299 Jy ! Component: 150 - total flux cleaned = 0.125893 Jy ! Component: 200 - total flux cleaned = 0.136951 Jy ! Total flux subtracted in 200 components = 0.136951 Jy ! Clean residual min=-0.018806 max=0.034496 Jy/beam ! Clean residual mean=0.000017 rms=0.006535 Jy/beam ! Combined flux in latest and established models = 0.721927 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.721927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110073Jy sigma=0.001248 ! Fit after self-cal, rms=0.110091Jy sigma=0.001248 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 0.98 KP 1.03 ! LA 1.17 MK 1.00 NL 1.08 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.01 KP 1.01 ! LA 1.11 MK 0.99 NL 1.13 OV 1.01 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 0.91 ! LA 0.88 MK 1.02 NL 1.09 OV 0.94 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.98 KP 0.88 ! LA 0.86 MK 1.01 NL 1.16 OV 1.01 ! PT 0.99 SC 0.98 ! ! ! Fit before self-cal, rms=0.110091Jy sigma=0.001248 ! Fit after self-cal, rms=0.080984Jy sigma=0.000928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.733 mas, bpa=-0.2237 degrees ! Estimated noise=1268.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232623 Jy ! Component: 100 - total flux cleaned = 0.0339986 Jy ! Component: 150 - total flux cleaned = 0.0378346 Jy ! Component: 200 - total flux cleaned = 0.0395468 Jy ! Total flux subtracted in 200 components = 0.0395468 Jy ! Clean residual min=-0.010460 max=0.012402 Jy/beam ! Clean residual mean=0.000014 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 0.761474 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.761474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074293Jy sigma=0.000844 ! Fit after self-cal, rms=0.074301Jy sigma=0.000843 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074301Jy sigma=0.000843 ! Fit after self-cal, rms=0.074138Jy sigma=0.000839 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=8.756 mas, bpa=-0.2327 degrees ! Estimated noise=1263.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145888 Jy ! Component: 100 - total flux cleaned = -0.000621099 Jy ! Component: 150 - total flux cleaned = -0.00113026 Jy ! Component: 200 - total flux cleaned = -0.00113218 Jy ! Total flux subtracted in 200 components = -0.00113218 Jy ! Clean residual min=-0.008940 max=0.010562 Jy/beam ! Clean residual mean=0.000010 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.760342 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.760342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073171Jy sigma=0.000830 ! Fit after self-cal, rms=0.073198Jy sigma=0.000829 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137827 Jy ! Component: 100 - total flux cleaned = -0.00138319 Jy ! Component: 150 - total flux cleaned = -0.00138951 Jy ! Component: 200 - total flux cleaned = -0.00127568 Jy ! Total flux subtracted in 200 components = -0.00127568 Jy ! Clean residual min=-0.008180 max=0.009962 Jy/beam ! Clean residual mean=0.000011 rms=0.002420 Jy/beam ! Combined flux in latest and established models = 0.759066 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.759066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072707Jy sigma=0.000825 ! Fit after self-cal, rms=0.072725Jy sigma=0.000825 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072725Jy sigma=0.000825 ! Fit after self-cal, rms=0.072787Jy sigma=0.000824 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=8.769 mas, bpa=-0.2455 degrees ! Estimated noise=1263.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131978 Jy ! Component: 100 - total flux cleaned = -0.00155023 Jy ! Component: 150 - total flux cleaned = -0.00207455 Jy ! Component: 200 - total flux cleaned = -0.00216846 Jy ! Total flux subtracted in 200 components = -0.00216846 Jy ! Clean residual min=-0.007357 max=0.009758 Jy/beam ! Clean residual mean=0.000010 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.756897 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.756898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072403Jy sigma=0.000821 ! Fit after self-cal, rms=0.072423Jy sigma=0.000820 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000930957 Jy ! Component: 100 - total flux cleaned = -0.00102275 Jy ! Component: 150 - total flux cleaned = -0.00110654 Jy ! Component: 200 - total flux cleaned = -0.00126196 Jy ! Total flux subtracted in 200 components = -0.00126196 Jy ! Clean residual min=-0.007187 max=0.009619 Jy/beam ! Clean residual mean=0.000011 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.755636 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.755635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072202Jy sigma=0.000818 ! Fit after self-cal, rms=0.072215Jy sigma=0.000818 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072215Jy sigma=0.000818 ! Fit after self-cal, rms=0.072231Jy sigma=0.000818 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.928 mas, bmaj=15.27 mas, bpa=-8.653 degrees ! Estimated noise=1613.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100078 Jy ! Component: 100 - total flux cleaned = 0.000871148 Jy ! Component: 150 - total flux cleaned = 0.000759978 Jy ! Component: 200 - total flux cleaned = 0.000664387 Jy ! Total flux subtracted in 200 components = 0.000664387 Jy ! Clean residual min=-0.008361 max=0.013017 Jy/beam ! Clean residual mean=0.000021 rms=0.003347 Jy/beam ! Combined flux in latest and established models = 0.7563 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 101 components and 0.7563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072319Jy sigma=0.000819 ! Fit after self-cal, rms=0.072203Jy sigma=0.000817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.5324e-05 Jy ! Component: 100 - total flux cleaned = 4.66564e-05 Jy ! Component: 150 - total flux cleaned = -3.83862e-05 Jy ! Component: 200 - total flux cleaned = 4.23931e-05 Jy ! Total flux subtracted in 200 components = 4.23931e-05 Jy ! Clean residual min=-0.008297 max=0.012787 Jy/beam ! Clean residual mean=0.000021 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 0.756342 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.756342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072360Jy sigma=0.000819 ! Fit after self-cal, rms=0.072266Jy sigma=0.000818 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=8.775 mas, bpa=-0.2372 degrees ! Estimated noise=1262.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.017 x 8.775 at -0.2372 degrees (North through East) ! Clean map min=-0.012752 max=0.61897 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072266Jy sigma=0.000818 ! Fit after self-cal, rms=0.068154Jy sigma=0.000764 ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=8.783 mas, bpa=-0.2912 degrees ! Estimated noise=1262.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266754 Jy ! Component: 100 - total flux cleaned = -0.00310754 Jy ! Component: 150 - total flux cleaned = -0.00345118 Jy ! Component: 200 - total flux cleaned = -0.00352479 Jy ! Total flux subtracted in 200 components = -0.00352479 Jy ! Clean residual min=-0.006770 max=0.009181 Jy/beam ! Clean residual mean=0.000009 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.752817 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.752817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067821Jy sigma=0.000761 ! Fit after self-cal, rms=0.067817Jy sigma=0.000761 ! Inverting map ! Added new window around map position (25.5, -87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725336 Jy ! Component: 100 - total flux cleaned = 0.00807323 Jy ! Component: 150 - total flux cleaned = 0.00807516 Jy ! Component: 200 - total flux cleaned = 0.00807542 Jy ! Total flux subtracted in 200 components = 0.00807542 Jy ! Clean residual min=-0.007047 max=0.007573 Jy/beam ! Clean residual mean=0.000011 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.760893 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 164 components and 0.760893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066688Jy sigma=0.000750 ! Fit after self-cal, rms=0.066693Jy sigma=0.000749 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066693Jy sigma=0.000749 ! Fit after self-cal, rms=0.066652Jy sigma=0.000748 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=7.656 mas, bpa=0.07647 degrees ! Estimated noise=1465.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.46578 Jy ! Component: 100 - total flux cleaned = 0.58421 Jy ! Component: 150 - total flux cleaned = 0.639816 Jy ! Component: 200 - total flux cleaned = 0.671473 Jy ! Total flux subtracted in 200 components = 0.671473 Jy ! Clean residual min=-0.015450 max=0.019532 Jy/beam ! Clean residual mean=0.000023 rms=0.004180 Jy/beam ! Combined flux in latest and established models = 0.671473 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.671473 Jy ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.798 mas, bpa=-0.2807 degrees ! Estimated noise=1261.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240092 Jy ! Component: 100 - total flux cleaned = 0.0405935 Jy ! Component: 150 - total flux cleaned = 0.0530523 Jy ! Component: 200 - total flux cleaned = 0.0595338 Jy ! Total flux subtracted in 200 components = 0.0595338 Jy ! Clean residual min=-0.009819 max=0.012437 Jy/beam ! Clean residual mean=0.000021 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.731007 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.731007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.943 mas, bmaj=15.32 mas, bpa=-8.671 degrees ! Estimated noise=1605.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142008 Jy ! Component: 100 - total flux cleaned = 0.0187524 Jy ! Component: 150 - total flux cleaned = 0.0208107 Jy ! Component: 200 - total flux cleaned = 0.0222676 Jy ! Total flux subtracted in 200 components = 0.0222676 Jy ! Clean residual min=-0.008745 max=0.011991 Jy/beam ! Clean residual mean=0.000025 rms=0.003243 Jy/beam ! Combined flux in latest and established models = 0.753275 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642979 Jy ! Component: 100 - total flux cleaned = 0.00156278 Jy ! Component: 150 - total flux cleaned = 0.00173132 Jy ! Component: 200 - total flux cleaned = 0.00173705 Jy ! Total flux subtracted in 200 components = 0.00173705 Jy ! Clean residual min=-0.007593 max=0.010906 Jy/beam ! Clean residual mean=0.000022 rms=0.002904 Jy/beam ! Combined flux in latest and established models = 0.755012 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 69 components and 0.755011 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.798 mas, bpa=-0.2807 degrees ! Estimated noise=1261.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257968 Jy ! Component: 100 - total flux cleaned = -0.00151515 Jy ! Component: 150 - total flux cleaned = -0.000834958 Jy ! Component: 200 - total flux cleaned = -0.000262041 Jy ! Total flux subtracted in 200 components = -0.000262041 Jy ! Clean residual min=-0.006708 max=0.009250 Jy/beam ! Clean residual mean=0.000010 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.754749 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.754749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067562Jy sigma=0.000758 ! Fit after self-cal, rms=0.067485Jy sigma=0.000756 wmodel J1254+1141_S_2014_06_09_pus_map.mod ! Writing 87 model components to file: J1254+1141_S_2014_06_09_pus_map.mod wobs J1254+1141_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1254+1141_S_2014_06_09_pus_uvs.fits wwins J1254+1141_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1254+1141_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394801 Jy ! Component: 100 - total flux cleaned = 0.00683612 Jy ! Component: 150 - total flux cleaned = 0.00786234 Jy ! Component: 200 - total flux cleaned = 0.00848586 Jy ! Component: 250 - total flux cleaned = 0.00896432 Jy ! Component: 300 - total flux cleaned = 0.00960381 Jy ! Component: 350 - total flux cleaned = 0.00994796 Jy ! Component: 400 - total flux cleaned = 0.0104425 Jy ! Component: 450 - total flux cleaned = 0.0110739 Jy ! Component: 500 - total flux cleaned = 0.011983 Jy ! Component: 550 - total flux cleaned = 0.0127119 Jy ! Component: 600 - total flux cleaned = 0.0132742 Jy ! Component: 650 - total flux cleaned = 0.0138168 Jy ! Component: 700 - total flux cleaned = 0.0142754 Jy ! Component: 750 - total flux cleaned = 0.0147832 Jy ! Component: 800 - total flux cleaned = 0.0151505 Jy ! Component: 850 - total flux cleaned = 0.0155084 Jy ! Component: 900 - total flux cleaned = 0.0160298 Jy ! Component: 950 - total flux cleaned = 0.0163115 Jy ! Component: 1000 - total flux cleaned = 0.0168591 Jy ! Component: 1050 - total flux cleaned = 0.0172316 Jy ! Component: 1100 - total flux cleaned = 0.0176465 Jy ! Component: 1150 - total flux cleaned = 0.0178987 Jy ! Component: 1200 - total flux cleaned = 0.0182432 Jy ! Component: 1250 - total flux cleaned = 0.0186734 Jy ! Component: 1300 - total flux cleaned = 0.0189985 Jy ! Component: 1350 - total flux cleaned = 0.0191338 Jy ! Component: 1400 - total flux cleaned = 0.0194454 Jy ! Component: 1450 - total flux cleaned = 0.0198362 Jy ! Component: 1500 - total flux cleaned = 0.0200922 Jy ! Component: 1550 - total flux cleaned = 0.020426 Jy ! Component: 1600 - total flux cleaned = 0.0206723 Jy ! Component: 1650 - total flux cleaned = 0.0210342 Jy ! Component: 1700 - total flux cleaned = 0.0213104 Jy ! Component: 1750 - total flux cleaned = 0.0216592 Jy ! Component: 1800 - total flux cleaned = 0.0220022 Jy ! Component: 1850 - total flux cleaned = 0.0223771 Jy ! Component: 1900 - total flux cleaned = 0.0227087 Jy ! Component: 1950 - total flux cleaned = 0.0229275 Jy ! Component: 2000 - total flux cleaned = 0.023214 Jy ! Component: 2050 - total flux cleaned = 0.0234263 Jy ! Component: 2100 - total flux cleaned = 0.0237052 Jy ! Component: 2150 - total flux cleaned = 0.0240831 Jy ! Component: 2200 - total flux cleaned = 0.0243202 Jy ! Component: 2250 - total flux cleaned = 0.0245878 Jy ! Component: 2300 - total flux cleaned = 0.02472 Jy ! Component: 2350 - total flux cleaned = 0.0249809 Jy ! Component: 2400 - total flux cleaned = 0.0250774 Jy ! Component: 2450 - total flux cleaned = 0.025173 Jy ! Component: 2500 - total flux cleaned = 0.0252674 Jy ! Component: 2550 - total flux cleaned = 0.0253605 Jy ! Component: 2600 - total flux cleaned = 0.0254221 Jy ! Component: 2650 - total flux cleaned = 0.0256054 Jy ! Component: 2700 - total flux cleaned = 0.0257566 Jy ! Component: 2750 - total flux cleaned = 0.0259963 Jy ! Component: 2800 - total flux cleaned = 0.026115 Jy ! Component: 2850 - total flux cleaned = 0.0262629 Jy ! Component: 2900 - total flux cleaned = 0.0264093 Jy ! Component: 2950 - total flux cleaned = 0.0265836 Jy ! Component: 3000 - total flux cleaned = 0.0266986 Jy ! Component: 3050 - total flux cleaned = 0.0268705 Jy ! Component: 3100 - total flux cleaned = 0.027013 Jy ! Component: 3150 - total flux cleaned = 0.0272112 Jy ! Component: 3200 - total flux cleaned = 0.0273519 Jy ! Component: 3250 - total flux cleaned = 0.0274079 Jy ! Component: 3300 - total flux cleaned = 0.0275753 Jy ! Component: 3350 - total flux cleaned = 0.0276586 Jy ! Component: 3400 - total flux cleaned = 0.0277969 Jy ! Component: 3450 - total flux cleaned = 0.0278796 Jy ! Component: 3500 - total flux cleaned = 0.0279893 Jy ! Component: 3550 - total flux cleaned = 0.0280713 Jy ! Component: 3600 - total flux cleaned = 0.0280985 Jy ! Component: 3650 - total flux cleaned = 0.0281528 Jy ! Component: 3700 - total flux cleaned = 0.0282611 Jy ! Component: 3750 - total flux cleaned = 0.028315 Jy ! Component: 3800 - total flux cleaned = 0.0284225 Jy ! Component: 3850 - total flux cleaned = 0.0285029 Jy ! Component: 3900 - total flux cleaned = 0.0285564 Jy ! Component: 3950 - total flux cleaned = 0.0286364 Jy ! Component: 4000 - total flux cleaned = 0.0286631 Jy ! Component: 4050 - total flux cleaned = 0.0286631 Jy ! Total flux subtracted in 4096 components = 0.0287694 Jy ! Clean residual min=-0.001596 max=0.001446 Jy/beam ! Clean residual mean=0.000004 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.783519 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 367 components and 0.783519 Jy ![Exited script file: muppet] wmap "J1254+1141_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 8.798 at -0.2807 degrees (North through East) ! Clean map min=-0.0096485 max=0.61762 Jy/beam ! Writing clean map to FITS file: J1254+1141_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.617621 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00042172 device "J1254+1141_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1254+1141_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204844 0.204844 0.409688 0.819377 1.63875 3.27751 6.55501 13.11 26.2201 52.4401 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.617 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 8.798 at -0.2807 degrees (North through East) ! Clean map min=-0.0096485 max=0.61762 Jy/beam quit ! Quitting program ! Log file J1254+1141_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:54:05 2016