! Started logfile: J1210-1217_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:52:41 2016 obs J1210-1217_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1210-1217_S_2014_06_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780307 visibilities/baseline/integration-bin. ! Found source: J1210-1217 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1210-1217_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970668Jy sigma=0.010205 ! Fit after self-cal, rms=0.926498Jy sigma=0.009722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.939 mas, bpa=-4.954 degrees ! Estimated noise=792.521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550741 Jy ! Component: 100 - total flux cleaned = 0.0727759 Jy ! Total flux subtracted in 100 components = 0.0727759 Jy ! Clean residual min=-0.004121 max=0.007636 Jy/beam ! Clean residual mean=-0.000024 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0727759 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0727759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080540Jy sigma=0.000795 ! Fit after self-cal, rms=0.080441Jy sigma=0.000794 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00895872 Jy ! Component: 100 - total flux cleaned = 0.0139667 Jy ! Total flux subtracted in 100 components = 0.0139667 Jy ! Clean residual min=-0.003043 max=0.004007 Jy/beam ! Clean residual mean=-0.000009 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0867426 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.0867426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079046Jy sigma=0.000778 ! Fit after self-cal, rms=0.079052Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.269 mas, bpa=-5.709 degrees ! Estimated noise=520.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544573 Jy ! Component: 100 - total flux cleaned = 0.00860988 Jy ! Component: 150 - total flux cleaned = 0.0106198 Jy ! Component: 200 - total flux cleaned = 0.0115088 Jy ! Total flux subtracted in 200 components = 0.0115088 Jy ! Clean residual min=-0.002224 max=0.002894 Jy/beam ! Clean residual mean=0.000004 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0982514 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.0982514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078636Jy sigma=0.000774 ! Fit after self-cal, rms=0.078631Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.95 KP 1.02 ! LA 1.16 MK 1.00 NL 1.02 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.98 KP 1.02 ! LA 1.12 MK 1.00 NL 1.11 OV 1.02 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.01 KP 0.95 ! LA 0.89 MK 1.02 NL 1.03 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00 KP 0.88 ! LA 0.87 MK 1.08 NL 1.04 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Fit before self-cal, rms=0.078631Jy sigma=0.000774 ! Fit after self-cal, rms=0.077268Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.306 mas, bpa=-5.468 degrees ! Estimated noise=517.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301951 Jy ! Component: 100 - total flux cleaned = 0.00426424 Jy ! Component: 150 - total flux cleaned = 0.00473207 Jy ! Component: 200 - total flux cleaned = 0.00504011 Jy ! Total flux subtracted in 200 components = 0.00504011 Jy ! Clean residual min=-0.002049 max=0.001903 Jy/beam ! Clean residual mean=0.000007 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.103292 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.103292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077140Jy sigma=0.000768 ! Fit after self-cal, rms=0.077119Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077119Jy sigma=0.000768 ! Fit after self-cal, rms=0.076787Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.291 mas, bpa=-5.51 degrees ! Estimated noise=515.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130544 Jy ! Component: 100 - total flux cleaned = 0.00192854 Jy ! Component: 150 - total flux cleaned = 0.00217734 Jy ! Component: 200 - total flux cleaned = 0.00234791 Jy ! Total flux subtracted in 200 components = 0.00234791 Jy ! Clean residual min=-0.001644 max=0.001537 Jy/beam ! Clean residual mean=0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.105639 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.105639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076757Jy sigma=0.000766 ! Fit after self-cal, rms=0.076771Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351875 Jy ! Component: 100 - total flux cleaned = 0.000481481 Jy ! Component: 150 - total flux cleaned = 0.000560679 Jy ! Component: 200 - total flux cleaned = 0.000615563 Jy ! Total flux subtracted in 200 components = 0.000615563 Jy ! Clean residual min=-0.001604 max=0.001540 Jy/beam ! Clean residual mean=0.000004 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.106255 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.106255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076759Jy sigma=0.000766 ! Fit after self-cal, rms=0.076757Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076757Jy sigma=0.000766 ! Fit after self-cal, rms=0.076920Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=8.273 mas, bpa=-5.425 degrees ! Estimated noise=516.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386658 Jy ! Component: 100 - total flux cleaned = 0.000505913 Jy ! Component: 150 - total flux cleaned = 0.000598093 Jy ! Component: 200 - total flux cleaned = 0.000649672 Jy ! Total flux subtracted in 200 components = 0.000649672 Jy ! Clean residual min=-0.001595 max=0.001490 Jy/beam ! Clean residual mean=0.000004 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.106905 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.106905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076910Jy sigma=0.000766 ! Fit after self-cal, rms=0.076912Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.46345e-05 Jy ! Component: 100 - total flux cleaned = 0.000139429 Jy ! Component: 150 - total flux cleaned = 0.000185257 Jy ! Component: 200 - total flux cleaned = 0.000200113 Jy ! Total flux subtracted in 200 components = 0.000200113 Jy ! Clean residual min=-0.001576 max=0.001483 Jy/beam ! Clean residual mean=0.000004 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.107105 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.107105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076905Jy sigma=0.000766 ! Fit after self-cal, rms=0.076905Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076905Jy sigma=0.000766 ! Fit after self-cal, rms=0.077003Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.395 mas, bmaj=16.17 mas, bpa=-7.032 degrees ! Estimated noise=640.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722575 Jy ! Component: 100 - total flux cleaned = 0.000850366 Jy ! Component: 150 - total flux cleaned = 0.00090991 Jy ! Component: 200 - total flux cleaned = 0.000974765 Jy ! Total flux subtracted in 200 components = 0.000974765 Jy ! Clean residual min=-0.001375 max=0.001525 Jy/beam ! Clean residual mean=0.000006 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.10808 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.10808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077003Jy sigma=0.000766 ! Fit after self-cal, rms=0.077002Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140397 Jy ! Component: 100 - total flux cleaned = 0.000169098 Jy ! Component: 150 - total flux cleaned = 0.000203429 Jy ! Component: 200 - total flux cleaned = 0.000227067 Jy ! Total flux subtracted in 200 components = 0.000227067 Jy ! Clean residual min=-0.001386 max=0.001519 Jy/beam ! Clean residual mean=0.000006 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.108307 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 113 components and 0.108307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077002Jy sigma=0.000766 ! Fit after self-cal, rms=0.077001Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.263 mas, bpa=-5.395 degrees ! Estimated noise=517.373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.263 at -5.395 degrees (North through East) ! Clean map min=-0.0015383 max=0.074164 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=6.915 mas, bpa=-4.514 degrees ! Estimated noise=784.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541174 Jy ! Component: 100 - total flux cleaned = 0.0720745 Jy ! Component: 150 - total flux cleaned = 0.0808074 Jy ! Component: 200 - total flux cleaned = 0.0863334 Jy ! Total flux subtracted in 200 components = 0.0863334 Jy ! Clean residual min=-0.003359 max=0.003180 Jy/beam ! Clean residual mean=-0.000008 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0863334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0863334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.263 mas, bpa=-5.395 degrees ! Estimated noise=517.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574771 Jy ! Component: 100 - total flux cleaned = 0.00956921 Jy ! Component: 150 - total flux cleaned = 0.0123611 Jy ! Component: 200 - total flux cleaned = 0.0144851 Jy ! Total flux subtracted in 200 components = 0.0144851 Jy ! Clean residual min=-0.001996 max=0.001809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.100818 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.100818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.395 mas, bmaj=16.17 mas, bpa=-7.032 degrees ! Estimated noise=640.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258382 Jy ! Component: 100 - total flux cleaned = 0.00420782 Jy ! Component: 150 - total flux cleaned = 0.00528809 Jy ! Component: 200 - total flux cleaned = 0.00605632 Jy ! Total flux subtracted in 200 components = 0.00605632 Jy ! Clean residual min=-0.001474 max=0.001506 Jy/beam ! Clean residual mean=0.000004 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.106875 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550367 Jy ! Component: 100 - total flux cleaned = 0.000876258 Jy ! Component: 150 - total flux cleaned = 0.000969091 Jy ! Component: 200 - total flux cleaned = 0.00105063 Jy ! Total flux subtracted in 200 components = 0.00105063 Jy ! Clean residual min=-0.001437 max=0.001495 Jy/beam ! Clean residual mean=0.000005 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.107925 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 0.107925 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.263 mas, bpa=-5.395 degrees ! Estimated noise=517.373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351343 Jy ! Component: 100 - total flux cleaned = -0.000229978 Jy ! Component: 150 - total flux cleaned = -0.000121191 Jy ! Component: 200 - total flux cleaned = -2.20689e-05 Jy ! Total flux subtracted in 200 components = -2.20689e-05 Jy ! Clean residual min=-0.001722 max=0.001427 Jy/beam ! Clean residual mean=0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.107903 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.107903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077025Jy sigma=0.000766 ! Fit after self-cal, rms=0.077023Jy sigma=0.000766 wmodel J1210-1217_S_2014_06_09_pus_map.mod ! Writing 86 model components to file: J1210-1217_S_2014_06_09_pus_map.mod wobs J1210-1217_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1210-1217_S_2014_06_09_pus_uvs.fits wwins J1210-1217_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1210-1217_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256117 Jy ! Component: 100 - total flux cleaned = -0.000206237 Jy ! Component: 150 - total flux cleaned = -0.000253277 Jy ! Component: 200 - total flux cleaned = -0.000320034 Jy ! Component: 250 - total flux cleaned = -0.000363321 Jy ! Component: 300 - total flux cleaned = -0.000384213 Jy ! Component: 350 - total flux cleaned = -0.000383856 Jy ! Component: 400 - total flux cleaned = -0.000324965 Jy ! Component: 450 - total flux cleaned = -0.000286517 Jy ! Component: 500 - total flux cleaned = -0.000248994 Jy ! Component: 550 - total flux cleaned = -0.000248754 Jy ! Component: 600 - total flux cleaned = -0.000266985 Jy ! Component: 650 - total flux cleaned = -0.000285034 Jy ! Component: 700 - total flux cleaned = -0.000337228 Jy ! Component: 750 - total flux cleaned = -0.0003713 Jy ! Component: 800 - total flux cleaned = -0.000388024 Jy ! Component: 850 - total flux cleaned = -0.000404951 Jy ! Component: 900 - total flux cleaned = -0.000503035 Jy ! Component: 950 - total flux cleaned = -0.000519278 Jy ! Component: 1000 - total flux cleaned = -0.000503342 Jy ! Component: 1050 - total flux cleaned = -0.000503664 Jy ! Component: 1100 - total flux cleaned = -0.000534601 Jy ! Component: 1150 - total flux cleaned = -0.000519508 Jy ! Component: 1200 - total flux cleaned = -0.000504592 Jy ! Component: 1250 - total flux cleaned = -0.000504437 Jy ! Component: 1300 - total flux cleaned = -0.000460415 Jy ! Component: 1350 - total flux cleaned = -0.000460448 Jy ! Component: 1400 - total flux cleaned = -0.000446268 Jy ! Component: 1450 - total flux cleaned = -0.000432109 Jy ! Component: 1500 - total flux cleaned = -0.000460161 Jy ! Component: 1550 - total flux cleaned = -0.000418463 Jy ! Component: 1600 - total flux cleaned = -0.000432459 Jy ! Component: 1650 - total flux cleaned = -0.000446025 Jy ! Component: 1700 - total flux cleaned = -0.000445844 Jy ! Component: 1750 - total flux cleaned = -0.000419173 Jy ! Component: 1800 - total flux cleaned = -0.000485459 Jy ! Component: 1850 - total flux cleaned = -0.000446084 Jy ! Component: 1900 - total flux cleaned = -0.000472334 Jy ! Component: 1950 - total flux cleaned = -0.000497882 Jy ! Component: 2000 - total flux cleaned = -0.000510596 Jy ! Component: 2050 - total flux cleaned = -0.000510568 Jy ! Component: 2100 - total flux cleaned = -0.000472842 Jy ! Component: 2150 - total flux cleaned = -0.000497718 Jy ! Component: 2200 - total flux cleaned = -0.000473008 Jy ! Component: 2250 - total flux cleaned = -0.000497572 Jy ! Component: 2300 - total flux cleaned = -0.000533904 Jy ! Component: 2350 - total flux cleaned = -0.000533973 Jy ! Component: 2400 - total flux cleaned = -0.000522029 Jy ! Component: 2450 - total flux cleaned = -0.000522053 Jy ! Component: 2500 - total flux cleaned = -0.000545565 Jy ! Component: 2550 - total flux cleaned = -0.000557203 Jy ! Component: 2600 - total flux cleaned = -0.000580441 Jy ! Component: 2650 - total flux cleaned = -0.000603506 Jy ! Component: 2700 - total flux cleaned = -0.000546332 Jy ! Component: 2750 - total flux cleaned = -0.000546519 Jy ! Component: 2800 - total flux cleaned = -0.000569019 Jy ! Component: 2850 - total flux cleaned = -0.000524246 Jy ! Component: 2900 - total flux cleaned = -0.000524376 Jy ! Component: 2950 - total flux cleaned = -0.000568522 Jy ! Component: 3000 - total flux cleaned = -0.000535626 Jy ! Component: 3050 - total flux cleaned = -0.000579117 Jy ! Component: 3100 - total flux cleaned = -0.000600704 Jy ! Component: 3150 - total flux cleaned = -0.000589864 Jy ! Component: 3200 - total flux cleaned = -0.000579104 Jy ! Component: 3250 - total flux cleaned = -0.000579143 Jy ! Component: 3300 - total flux cleaned = -0.000589691 Jy ! Component: 3350 - total flux cleaned = -0.000568738 Jy ! Component: 3400 - total flux cleaned = -0.000579171 Jy ! Component: 3450 - total flux cleaned = -0.000579221 Jy ! Component: 3500 - total flux cleaned = -0.000610098 Jy ! Component: 3550 - total flux cleaned = -0.000630554 Jy ! Component: 3600 - total flux cleaned = -0.000661011 Jy ! Component: 3650 - total flux cleaned = -0.000660942 Jy ! Component: 3700 - total flux cleaned = -0.000691 Jy ! Component: 3750 - total flux cleaned = -0.000681041 Jy ! Component: 3800 - total flux cleaned = -0.000700953 Jy ! Component: 3850 - total flux cleaned = -0.000710745 Jy ! Component: 3900 - total flux cleaned = -0.000710764 Jy ! Component: 3950 - total flux cleaned = -0.000749796 Jy ! Component: 4000 - total flux cleaned = -0.000788598 Jy ! Component: 4050 - total flux cleaned = -0.000807881 Jy ! Total flux subtracted in 4096 components = -0.000807889 Jy ! Clean residual min=-0.000579 max=0.000571 Jy/beam ! Clean residual mean=0.000001 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.107095 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 334 components and 0.107095 Jy ![Exited script file: muppet] wmap "J1210-1217_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.263 at -5.395 degrees (North through East) ! Clean map min=-0.0011211 max=0.074272 Jy/beam ! Writing clean map to FITS file: J1210-1217_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0742721 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165417 device "J1210-1217_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1210-1217_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.668151 0.668151 1.3363 2.6726 5.34521 10.6904 21.3808 42.7617 85.5234 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.263 at -5.395 degrees (North through East) ! Clean map min=-0.0011211 max=0.074272 Jy/beam quit ! Quitting program ! Log file J1210-1217_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:52:46 2016