! Started logfile: J1202-0528_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:52:31 2016 obs J1202-0528_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1202-0528_S_2014_06_09_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.602778 visibilities/baseline/integration-bin. ! Found source: J1202-0528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 6076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1202-0528_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.606686Jy sigma=0.006554 ! Fit after self-cal, rms=0.542116Jy sigma=0.005895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=9.482 mas, bpa=13.26 degrees ! Estimated noise=1113.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.362401 Jy ! Component: 100 - total flux cleaned = 0.442277 Jy ! Total flux subtracted in 100 components = 0.442277 Jy ! Clean residual min=-0.014680 max=0.026225 Jy/beam ! Clean residual mean=-0.000015 rms=0.004830 Jy/beam ! Combined flux in latest and established models = 0.442277 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.442277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104078Jy sigma=0.001056 ! Fit after self-cal, rms=0.104046Jy sigma=0.001056 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.603 mas, bmaj=10.63 mas, bpa=12.57 degrees ! Estimated noise=859.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292412 Jy ! Component: 100 - total flux cleaned = 0.0445705 Jy ! Component: 150 - total flux cleaned = 0.0535019 Jy ! Component: 200 - total flux cleaned = 0.0589983 Jy ! Total flux subtracted in 200 components = 0.0589983 Jy ! Clean residual min=-0.010665 max=0.013364 Jy/beam ! Clean residual mean=-0.000065 rms=0.003075 Jy/beam ! Combined flux in latest and established models = 0.501275 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 38 components and 0.501275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094987Jy sigma=0.000972 ! Fit after self-cal, rms=0.094481Jy sigma=0.000967 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.99 KP 1.06 ! LA 1.18 MK 1.00* NL 1.05 OV 0.98 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 1.02 ! LA 1.13 MK 1.00* NL 1.13 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.02 KP 0.93 ! LA 0.89 MK 1.00* NL 0.96 OV 0.94 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00 KP 0.88 ! LA 0.86 MK 1.00* NL 1.01 OV 1.00 ! PT 0.99 SC 0.95 ! ! ! Fit before self-cal, rms=0.094481Jy sigma=0.000967 ! Fit after self-cal, rms=0.079424Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.573 mas, bmaj=10.64 mas, bpa=12.79 degrees ! Estimated noise=855.842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125494 Jy ! Component: 100 - total flux cleaned = 0.0149478 Jy ! Component: 150 - total flux cleaned = 0.0154428 Jy ! Component: 200 - total flux cleaned = 0.0159493 Jy ! Total flux subtracted in 200 components = 0.0159493 Jy ! Clean residual min=-0.005676 max=0.007145 Jy/beam ! Clean residual mean=-0.000036 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 0.517225 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 94 components and 0.517225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077445Jy sigma=0.000793 ! Fit after self-cal, rms=0.077304Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077304Jy sigma=0.000791 ! Fit after self-cal, rms=0.075017Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.573 mas, bmaj=10.63 mas, bpa=12.76 degrees ! Estimated noise=852.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203705 Jy ! Component: 100 - total flux cleaned = 0.00305413 Jy ! Component: 150 - total flux cleaned = 0.00367853 Jy ! Component: 200 - total flux cleaned = 0.00422108 Jy ! Total flux subtracted in 200 components = 0.00422108 Jy ! Clean residual min=-0.004540 max=0.005723 Jy/beam ! Clean residual mean=-0.000008 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.521446 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 132 components and 0.521446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074775Jy sigma=0.000769 ! Fit after self-cal, rms=0.074772Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56, 111). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614152 Jy ! Component: 100 - total flux cleaned = 0.00962357 Jy ! Component: 150 - total flux cleaned = 0.0119609 Jy ! Component: 200 - total flux cleaned = 0.0137995 Jy ! Total flux subtracted in 200 components = 0.0137995 Jy ! Clean residual min=-0.003520 max=0.003679 Jy/beam ! Clean residual mean=-0.000010 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.535245 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 180 components and 0.535245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074297Jy sigma=0.000762 ! Fit after self-cal, rms=0.074265Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074265Jy sigma=0.000762 ! Fit after self-cal, rms=0.074180Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.57 mas, bmaj=10.64 mas, bpa=12.8 degrees ! Estimated noise=851.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209253 Jy ! Component: 100 - total flux cleaned = 0.00318331 Jy ! Component: 150 - total flux cleaned = 0.00415619 Jy ! Component: 200 - total flux cleaned = 0.00473072 Jy ! Total flux subtracted in 200 components = 0.00473072 Jy ! Clean residual min=-0.003065 max=0.003134 Jy/beam ! Clean residual mean=-0.000008 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.539976 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 209 components and 0.539976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074048Jy sigma=0.000759 ! Fit after self-cal, rms=0.074043Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703073 Jy ! Component: 100 - total flux cleaned = 0.00115994 Jy ! Component: 150 - total flux cleaned = 0.00158035 Jy ! Component: 200 - total flux cleaned = 0.00200995 Jy ! Total flux subtracted in 200 components = 0.00200995 Jy ! Clean residual min=-0.002890 max=0.002971 Jy/beam ! Clean residual mean=-0.000008 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.541986 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 233 components and 0.541986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073986Jy sigma=0.000759 ! Fit after self-cal, rms=0.073984Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073984Jy sigma=0.000759 ! Fit after self-cal, rms=0.073964Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=15.71 mas, bpa=-3.07 degrees ! Estimated noise=961.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188268 Jy ! Component: 100 - total flux cleaned = 0.00306349 Jy ! Component: 150 - total flux cleaned = 0.00353898 Jy ! Component: 200 - total flux cleaned = 0.00391882 Jy ! Total flux subtracted in 200 components = 0.00391882 Jy ! Clean residual min=-0.003209 max=0.003535 Jy/beam ! Clean residual mean=-0.000010 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.545905 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 275 components and 0.545905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073921Jy sigma=0.000758 ! Fit after self-cal, rms=0.073920Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590415 Jy ! Component: 100 - total flux cleaned = 0.000854066 Jy ! Component: 150 - total flux cleaned = 0.0011281 Jy ! Component: 200 - total flux cleaned = 0.00131428 Jy ! Total flux subtracted in 200 components = 0.00131428 Jy ! Clean residual min=-0.003063 max=0.003335 Jy/beam ! Clean residual mean=-0.000010 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.547219 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 295 components and 0.547219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073897Jy sigma=0.000758 ! Fit after self-cal, rms=0.073897Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=10.64 mas, bpa=12.84 degrees ! Estimated noise=851.618 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.567 x 10.64 at 12.84 degrees (North through East) ! Clean map min=-0.002589 max=0.45451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=9.491 mas, bpa=13.52 degrees ! Estimated noise=1092.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.355747 Jy ! Component: 100 - total flux cleaned = 0.434217 Jy ! Component: 150 - total flux cleaned = 0.461961 Jy ! Component: 200 - total flux cleaned = 0.478252 Jy ! Total flux subtracted in 200 components = 0.478252 Jy ! Clean residual min=-0.008007 max=0.008662 Jy/beam ! Clean residual mean=0.000001 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.478252 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.478252 Jy ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=10.64 mas, bpa=12.84 degrees ! Estimated noise=851.618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134877 Jy ! Component: 100 - total flux cleaned = 0.0227747 Jy ! Component: 150 - total flux cleaned = 0.0301023 Jy ! Component: 200 - total flux cleaned = 0.0360721 Jy ! Total flux subtracted in 200 components = 0.0360721 Jy ! Clean residual min=-0.005010 max=0.003960 Jy/beam ! Clean residual mean=-0.000001 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.514324 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 111 components and 0.514324 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=15.71 mas, bpa=-3.07 degrees ! Estimated noise=961.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715259 Jy ! Component: 100 - total flux cleaned = 0.0125223 Jy ! Component: 150 - total flux cleaned = 0.0167084 Jy ! Component: 200 - total flux cleaned = 0.0200944 Jy ! Total flux subtracted in 200 components = 0.0200944 Jy ! Clean residual min=-0.004376 max=0.003845 Jy/beam ! Clean residual mean=-0.000006 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.534418 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281164 Jy ! Component: 100 - total flux cleaned = 0.00490278 Jy ! Component: 150 - total flux cleaned = 0.00628406 Jy ! Component: 200 - total flux cleaned = 0.00741545 Jy ! Total flux subtracted in 200 components = 0.00741545 Jy ! Clean residual min=-0.003778 max=0.003551 Jy/beam ! Clean residual mean=-0.000006 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.541834 Jy ! Adding 141 model components to the UV plane model. ! The established model now contains 241 components and 0.541834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=10.64 mas, bpa=12.84 degrees ! Estimated noise=851.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180383 Jy ! Component: 100 - total flux cleaned = 0.00278723 Jy ! Component: 150 - total flux cleaned = 0.00349031 Jy ! Component: 200 - total flux cleaned = 0.00398421 Jy ! Total flux subtracted in 200 components = 0.00398421 Jy ! Clean residual min=-0.002995 max=0.002665 Jy/beam ! Clean residual mean=-0.000006 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.545818 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 266 components and 0.545818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073913Jy sigma=0.000758 ! Fit after self-cal, rms=0.073898Jy sigma=0.000758 wmodel J1202-0528_S_2014_06_09_pus_map.mod ! Writing 266 model components to file: J1202-0528_S_2014_06_09_pus_map.mod wobs J1202-0528_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1202-0528_S_2014_06_09_pus_uvs.fits wwins J1202-0528_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J1202-0528_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936097 Jy ! Component: 100 - total flux cleaned = -0.00111595 Jy ! Component: 150 - total flux cleaned = -0.00144327 Jy ! Component: 200 - total flux cleaned = -0.00171637 Jy ! Component: 250 - total flux cleaned = -0.00201237 Jy ! Component: 300 - total flux cleaned = -0.00225972 Jy ! Component: 350 - total flux cleaned = -0.00246461 Jy ! Component: 400 - total flux cleaned = -0.00272737 Jy ! Component: 450 - total flux cleaned = -0.00304217 Jy ! Component: 500 - total flux cleaned = -0.00340567 Jy ! Component: 550 - total flux cleaned = -0.00366935 Jy ! Component: 600 - total flux cleaned = -0.00403728 Jy ! Component: 650 - total flux cleaned = -0.00420161 Jy ! Component: 700 - total flux cleaned = -0.0044156 Jy ! Component: 750 - total flux cleaned = -0.00472603 Jy ! Component: 800 - total flux cleaned = -0.00500142 Jy ! Component: 850 - total flux cleaned = -0.00522111 Jy ! Component: 900 - total flux cleaned = -0.00543559 Jy ! Component: 950 - total flux cleaned = -0.00562183 Jy ! Component: 1000 - total flux cleaned = -0.00587145 Jy ! Component: 1050 - total flux cleaned = -0.00607068 Jy ! Component: 1100 - total flux cleaned = -0.00624367 Jy ! Component: 1150 - total flux cleaned = -0.00639175 Jy ! Component: 1200 - total flux cleaned = -0.00647458 Jy ! Component: 1250 - total flux cleaned = -0.00653599 Jy ! Component: 1300 - total flux cleaned = -0.00665555 Jy ! Component: 1350 - total flux cleaned = -0.00675351 Jy ! Component: 1400 - total flux cleaned = -0.00679213 Jy ! Component: 1450 - total flux cleaned = -0.00686748 Jy ! Component: 1500 - total flux cleaned = -0.00694171 Jy ! Component: 1550 - total flux cleaned = -0.0070144 Jy ! Component: 1600 - total flux cleaned = -0.00699615 Jy ! Component: 1650 - total flux cleaned = -0.00710159 Jy ! Component: 1700 - total flux cleaned = -0.00711867 Jy ! Component: 1750 - total flux cleaned = -0.00718712 Jy ! Component: 1800 - total flux cleaned = -0.00718694 Jy ! Component: 1850 - total flux cleaned = -0.00718701 Jy ! Component: 1900 - total flux cleaned = -0.00718681 Jy ! Component: 1950 - total flux cleaned = -0.00721935 Jy ! Component: 2000 - total flux cleaned = -0.0072193 Jy ! Component: 2050 - total flux cleaned = -0.00718794 Jy ! Component: 2100 - total flux cleaned = -0.00715685 Jy ! Component: 2150 - total flux cleaned = -0.0071722 Jy ! Component: 2200 - total flux cleaned = -0.00720274 Jy ! Component: 2250 - total flux cleaned = -0.0072181 Jy ! Component: 2300 - total flux cleaned = -0.0072034 Jy ! Component: 2350 - total flux cleaned = -0.00717406 Jy ! Component: 2400 - total flux cleaned = -0.00713044 Jy ! Component: 2450 - total flux cleaned = -0.00710192 Jy ! Component: 2500 - total flux cleaned = -0.00710204 Jy ! Component: 2550 - total flux cleaned = -0.0070457 Jy ! Component: 2600 - total flux cleaned = -0.00700415 Jy ! Component: 2650 - total flux cleaned = -0.00696289 Jy ! Component: 2700 - total flux cleaned = -0.00694929 Jy ! Component: 2750 - total flux cleaned = -0.00690885 Jy ! Component: 2800 - total flux cleaned = -0.00690894 Jy ! Component: 2850 - total flux cleaned = -0.00689559 Jy ! Component: 2900 - total flux cleaned = -0.00688256 Jy ! Component: 2950 - total flux cleaned = -0.00689541 Jy ! Component: 3000 - total flux cleaned = -0.00686967 Jy ! Component: 3050 - total flux cleaned = -0.00690795 Jy ! Component: 3100 - total flux cleaned = -0.00687 Jy ! Component: 3150 - total flux cleaned = -0.00689517 Jy ! Component: 3200 - total flux cleaned = -0.00687041 Jy ! Component: 3250 - total flux cleaned = -0.00687025 Jy ! Component: 3300 - total flux cleaned = -0.00687027 Jy ! Component: 3350 - total flux cleaned = -0.00690659 Jy ! Component: 3400 - total flux cleaned = -0.00688252 Jy ! Component: 3450 - total flux cleaned = -0.00689437 Jy ! Component: 3500 - total flux cleaned = -0.00695352 Jy ! Component: 3550 - total flux cleaned = -0.00697679 Jy ! Component: 3600 - total flux cleaned = -0.0069652 Jy ! Component: 3650 - total flux cleaned = -0.00705786 Jy ! Component: 3700 - total flux cleaned = -0.00706938 Jy ! Component: 3750 - total flux cleaned = -0.00711528 Jy ! Component: 3800 - total flux cleaned = -0.00717218 Jy ! Component: 3850 - total flux cleaned = -0.00724005 Jy ! Component: 3900 - total flux cleaned = -0.00729637 Jy ! Component: 3950 - total flux cleaned = -0.00734116 Jy ! Component: 4000 - total flux cleaned = -0.0074192 Jy ! Component: 4050 - total flux cleaned = -0.00746355 Jy ! Total flux subtracted in 4096 components = -0.00754079 Jy ! Clean residual min=-0.000683 max=0.000675 Jy/beam ! Clean residual mean=-0.000002 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.538277 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 569 components and 0.538277 Jy ![Exited script file: muppet] wmap "J1202-0528_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.567 x 10.64 at 12.84 degrees (North through East) ! Clean map min=-0.0017367 max=0.45497 Jy/beam ! Writing clean map to FITS file: J1202-0528_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.454973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210517 device "J1202-0528_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1202-0528_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138811 0.138811 0.277621 0.555242 1.11048 2.22097 4.44194 8.88387 17.7677 35.5355 71.071 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.454 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.567 x 10.64 at 12.84 degrees (North through East) ! Clean map min=-0.0017367 max=0.45497 Jy/beam quit ! Quitting program ! Log file J1202-0528_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:52:36 2016