! Started logfile: J1125-3557_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:52:12 2016 obs J1125-3557_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1125-3557_S_2014_06_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.701716 visibilities/baseline/integration-bin. ! Found source: J1125-3557 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1125-3557_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000384Jy sigma=0.007972 ! Fit after self-cal, rms=0.946635Jy sigma=0.007583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=6.352 mas, bpa=-1.463 degrees ! Estimated noise=1692.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440461 Jy ! Component: 100 - total flux cleaned = 0.0541422 Jy ! Total flux subtracted in 100 components = 0.0541422 Jy ! Clean residual min=-0.005483 max=0.005290 Jy/beam ! Clean residual mean=-0.000022 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.0541422 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0541422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107167Jy sigma=0.000760 ! Fit after self-cal, rms=0.105915Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.881 mas, bpa=-2.182 degrees ! Estimated noise=726.181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00768413 Jy ! Component: 100 - total flux cleaned = 0.0111518 Jy ! Component: 150 - total flux cleaned = 0.0128543 Jy ! Component: 200 - total flux cleaned = 0.0136967 Jy ! Total flux subtracted in 200 components = 0.0136967 Jy ! Clean residual min=-0.002167 max=0.002333 Jy/beam ! Clean residual mean=-0.000014 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0678389 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.0678389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105374Jy sigma=0.000747 ! Fit after self-cal, rms=0.105315Jy sigma=0.000747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.93 KP 0.99 ! LA 1.12 MK 1.02 NL 0.96 OV 1.09 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.87 KP 1.03 ! LA 1.08 MK 1.06 NL 1.03 OV 1.02 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.93 KP 0.97 ! LA 0.95 MK 0.99 NL 0.93 OV 0.94 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.82 KP 0.98 ! LA 0.85 MK 1.07 NL 1.04 OV 1.06 ! PT 0.99 SC 0.97 ! ! ! Fit before self-cal, rms=0.105315Jy sigma=0.000747 ! Fit after self-cal, rms=0.102009Jy sigma=0.000745 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.98 mas, bpa=-2.279 degrees ! Estimated noise=723.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308764 Jy ! Component: 100 - total flux cleaned = 0.000308751 Jy ! Component: 150 - total flux cleaned = 0.000350231 Jy ! Component: 200 - total flux cleaned = 0.000350102 Jy ! Total flux subtracted in 200 components = 0.000350102 Jy ! Clean residual min=-0.002023 max=0.002294 Jy/beam ! Clean residual mean=-0.000021 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.068189 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.068189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101999Jy sigma=0.000745 ! Fit after self-cal, rms=0.101901Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101901Jy sigma=0.000745 ! Fit after self-cal, rms=0.101543Jy sigma=0.000745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.984 mas, bpa=-2.41 degrees ! Estimated noise=724.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407872 Jy ! Component: 100 - total flux cleaned = 0.000471137 Jy ! Component: 150 - total flux cleaned = 0.000489506 Jy ! Component: 200 - total flux cleaned = 0.000488753 Jy ! Total flux subtracted in 200 components = 0.000488753 Jy ! Clean residual min=-0.002054 max=0.002355 Jy/beam ! Clean residual mean=-0.000020 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0686777 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0686777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101535Jy sigma=0.000745 ! Fit after self-cal, rms=0.101521Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113979 Jy ! Component: 100 - total flux cleaned = 0.000134181 Jy ! Component: 150 - total flux cleaned = 0.000170611 Jy ! Component: 200 - total flux cleaned = 0.000187334 Jy ! Total flux subtracted in 200 components = 0.000187334 Jy ! Clean residual min=-0.002065 max=0.002337 Jy/beam ! Clean residual mean=-0.000019 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0688651 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0688651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101514Jy sigma=0.000744 ! Fit after self-cal, rms=0.101514Jy sigma=0.000744 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101514Jy sigma=0.000744 ! Fit after self-cal, rms=0.101459Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.968 mas, bpa=-2.5 degrees ! Estimated noise=723.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258227 Jy ! Component: 100 - total flux cleaned = 0.000315054 Jy ! Component: 150 - total flux cleaned = 0.000332673 Jy ! Component: 200 - total flux cleaned = 0.000349445 Jy ! Total flux subtracted in 200 components = 0.000349445 Jy ! Clean residual min=-0.002058 max=0.002364 Jy/beam ! Clean residual mean=-0.000020 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0692145 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.0692145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101452Jy sigma=0.000744 ! Fit after self-cal, rms=0.101455Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50023e-05 Jy ! Component: 100 - total flux cleaned = 3.27479e-05 Jy ! Component: 150 - total flux cleaned = 6.65672e-05 Jy ! Component: 200 - total flux cleaned = 8.24197e-05 Jy ! Total flux subtracted in 200 components = 8.24197e-05 Jy ! Clean residual min=-0.002061 max=0.002344 Jy/beam ! Clean residual mean=-0.000019 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0692969 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0692969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101450Jy sigma=0.000744 ! Fit after self-cal, rms=0.101448Jy sigma=0.000744 ! Inverting map ! Added new window around map position (125, 99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199941 Jy ! Component: 100 - total flux cleaned = 0.00221087 Jy ! Component: 150 - total flux cleaned = 0.00216206 Jy ! Component: 200 - total flux cleaned = 0.00209934 Jy ! Total flux subtracted in 200 components = 0.00209934 Jy ! Clean residual min=-0.001964 max=0.002362 Jy/beam ! Clean residual mean=-0.000013 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0713962 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0713962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101407Jy sigma=0.000744 ! Fit after self-cal, rms=0.101377Jy sigma=0.000744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101377Jy sigma=0.000744 ! Fit after self-cal, rms=0.100870Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=25.31 mas, bpa=2.355 degrees ! Estimated noise=920.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148309 Jy ! Component: 100 - total flux cleaned = 0.00189338 Jy ! Component: 150 - total flux cleaned = 0.00200098 Jy ! Component: 200 - total flux cleaned = 0.00205303 Jy ! Total flux subtracted in 200 components = 0.00205303 Jy ! Clean residual min=-0.002485 max=0.002029 Jy/beam ! Clean residual mean=-0.000025 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0734493 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.0734493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100862Jy sigma=0.000744 ! Fit after self-cal, rms=0.100827Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358817 Jy ! Component: 100 - total flux cleaned = 0.000453832 Jy ! Component: 150 - total flux cleaned = 0.000529818 Jy ! Component: 200 - total flux cleaned = 0.000579212 Jy ! Total flux subtracted in 200 components = 0.000579212 Jy ! Clean residual min=-0.002502 max=0.002010 Jy/beam ! Clean residual mean=-0.000027 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0740285 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.0740285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100830Jy sigma=0.000744 ! Fit after self-cal, rms=0.100810Jy sigma=0.000744 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.959 mas, bpa=-2.642 degrees ! Estimated noise=720.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.959 at -2.642 degrees (North through East) ! Clean map min=-0.0019175 max=0.055835 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=6.379 mas, bpa=-1.966 degrees ! Estimated noise=1671.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444533 Jy ! Component: 100 - total flux cleaned = 0.0557662 Jy ! Component: 150 - total flux cleaned = 0.0621384 Jy ! Component: 200 - total flux cleaned = 0.0653545 Jy ! Total flux subtracted in 200 components = 0.0653545 Jy ! Clean residual min=-0.005406 max=0.005458 Jy/beam ! Clean residual mean=-0.000015 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.0653545 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0653545 Jy ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.959 mas, bpa=-2.642 degrees ! Estimated noise=720.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511951 Jy ! Component: 100 - total flux cleaned = 0.00761958 Jy ! Component: 150 - total flux cleaned = 0.00863302 Jy ! Component: 200 - total flux cleaned = 0.00923222 Jy ! Total flux subtracted in 200 components = 0.00923222 Jy ! Clean residual min=-0.002022 max=0.002050 Jy/beam ! Clean residual mean=-0.000012 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0745867 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.0745867 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=25.31 mas, bpa=2.355 degrees ! Estimated noise=920.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860637 Jy ! Component: 100 - total flux cleaned = 0.00108903 Jy ! Component: 150 - total flux cleaned = 0.00110181 Jy ! Component: 200 - total flux cleaned = 0.00111386 Jy ! Total flux subtracted in 200 components = 0.00111386 Jy ! Clean residual min=-0.002554 max=0.002082 Jy/beam ! Clean residual mean=-0.000022 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0757005 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.03878e-07 Jy ! Component: 100 - total flux cleaned = -1.08157e-06 Jy ! Component: 150 - total flux cleaned = -1.47418e-06 Jy ! Component: 200 - total flux cleaned = -1.78175e-06 Jy ! Total flux subtracted in 200 components = -1.78175e-06 Jy ! Clean residual min=-0.002542 max=0.002072 Jy/beam ! Clean residual mean=-0.000022 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0756987 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0756987 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.959 mas, bpa=-2.642 degrees ! Estimated noise=720.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158523 Jy ! Component: 100 - total flux cleaned = -0.000159805 Jy ! Component: 150 - total flux cleaned = -0.000159222 Jy ! Component: 200 - total flux cleaned = -0.000159302 Jy ! Total flux subtracted in 200 components = -0.000159302 Jy ! Clean residual min=-0.001919 max=0.002022 Jy/beam ! Clean residual mean=-0.000010 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0755394 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.0755394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100748Jy sigma=0.000743 ! Fit after self-cal, rms=0.100710Jy sigma=0.000743 wmodel J1125-3557_S_2014_06_09_pus_map.mod ! Writing 61 model components to file: J1125-3557_S_2014_06_09_pus_map.mod wobs J1125-3557_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1125-3557_S_2014_06_09_pus_uvs.fits wwins J1125-3557_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J1125-3557_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.38739e-05 Jy ! Component: 100 - total flux cleaned = 9.15178e-05 Jy ! Component: 150 - total flux cleaned = 0.000252381 Jy ! Component: 200 - total flux cleaned = 0.000313454 Jy ! Component: 250 - total flux cleaned = 0.000253331 Jy ! Component: 300 - total flux cleaned = 0.000138652 Jy ! Component: 350 - total flux cleaned = 0.000166692 Jy ! Component: 400 - total flux cleaned = 0.000193798 Jy ! Component: 450 - total flux cleaned = 0.000219712 Jy ! Component: 500 - total flux cleaned = 0.00019349 Jy ! Component: 550 - total flux cleaned = 0.000143585 Jy ! Component: 600 - total flux cleaned = 0.000167921 Jy ! Component: 650 - total flux cleaned = 0.000120598 Jy ! Component: 700 - total flux cleaned = 0.000120796 Jy ! Component: 750 - total flux cleaned = 9.8765e-05 Jy ! Component: 800 - total flux cleaned = 0.000121387 Jy ! Component: 850 - total flux cleaned = 7.79381e-05 Jy ! Component: 900 - total flux cleaned = 3.53441e-05 Jy ! Component: 950 - total flux cleaned = -2.75824e-05 Jy ! Component: 1000 - total flux cleaned = -8.96719e-05 Jy ! Component: 1050 - total flux cleaned = -0.000170396 Jy ! Component: 1100 - total flux cleaned = -0.000169865 Jy ! Component: 1150 - total flux cleaned = -0.000228359 Jy ! Component: 1200 - total flux cleaned = -0.000305663 Jy ! Component: 1250 - total flux cleaned = -0.000362705 Jy ! Component: 1300 - total flux cleaned = -0.000437644 Jy ! Component: 1350 - total flux cleaned = -0.000548159 Jy ! Component: 1400 - total flux cleaned = -0.000602659 Jy ! Component: 1450 - total flux cleaned = -0.000692209 Jy ! Component: 1500 - total flux cleaned = -0.000780635 Jy ! Component: 1550 - total flux cleaned = -0.000815138 Jy ! Component: 1600 - total flux cleaned = -0.000815222 Jy ! Component: 1650 - total flux cleaned = -0.000832497 Jy ! Component: 1700 - total flux cleaned = -0.000883247 Jy ! Component: 1750 - total flux cleaned = -0.000883115 Jy ! Component: 1800 - total flux cleaned = -0.000866619 Jy ! Component: 1850 - total flux cleaned = -0.000801942 Jy ! Component: 1900 - total flux cleaned = -0.000770156 Jy ! Component: 1950 - total flux cleaned = -0.000802216 Jy ! Component: 2000 - total flux cleaned = -0.000833644 Jy ! Component: 2050 - total flux cleaned = -0.000818334 Jy ! Component: 2100 - total flux cleaned = -0.000879695 Jy ! Component: 2150 - total flux cleaned = -0.000849211 Jy ! Component: 2200 - total flux cleaned = -0.000863994 Jy ! Component: 2250 - total flux cleaned = -0.000849064 Jy ! Component: 2300 - total flux cleaned = -0.000834238 Jy ! Component: 2350 - total flux cleaned = -0.000804878 Jy ! Component: 2400 - total flux cleaned = -0.000761755 Jy ! Component: 2450 - total flux cleaned = -0.00074768 Jy ! Component: 2500 - total flux cleaned = -0.000747666 Jy ! Component: 2550 - total flux cleaned = -0.000747609 Jy ! Component: 2600 - total flux cleaned = -0.000733734 Jy ! Component: 2650 - total flux cleaned = -0.000706224 Jy ! Component: 2700 - total flux cleaned = -0.000774589 Jy ! Component: 2750 - total flux cleaned = -0.000760864 Jy ! Component: 2800 - total flux cleaned = -0.000707081 Jy ! Component: 2850 - total flux cleaned = -0.000733623 Jy ! Component: 2900 - total flux cleaned = -0.000693866 Jy ! Component: 2950 - total flux cleaned = -0.000680931 Jy ! Component: 3000 - total flux cleaned = -0.000680941 Jy ! Component: 3050 - total flux cleaned = -0.000629173 Jy ! Component: 3100 - total flux cleaned = -0.000641936 Jy ! Component: 3150 - total flux cleaned = -0.000654633 Jy ! Component: 3200 - total flux cleaned = -0.000654635 Jy ! Component: 3250 - total flux cleaned = -0.000629514 Jy ! Component: 3300 - total flux cleaned = -0.000642055 Jy ! Component: 3350 - total flux cleaned = -0.000691477 Jy ! Component: 3400 - total flux cleaned = -0.000642243 Jy ! Component: 3450 - total flux cleaned = -0.000617753 Jy ! Component: 3500 - total flux cleaned = -0.000617692 Jy ! Component: 3550 - total flux cleaned = -0.000617583 Jy ! Component: 3600 - total flux cleaned = -0.00061749 Jy ! Component: 3650 - total flux cleaned = -0.000641288 Jy ! Component: 3700 - total flux cleaned = -0.000641372 Jy ! Component: 3750 - total flux cleaned = -0.000594485 Jy ! Component: 3800 - total flux cleaned = -0.000617865 Jy ! Component: 3850 - total flux cleaned = -0.000606258 Jy ! Component: 3900 - total flux cleaned = -0.000606377 Jy ! Component: 3950 - total flux cleaned = -0.000617803 Jy ! Component: 4000 - total flux cleaned = -0.000629254 Jy ! Component: 4050 - total flux cleaned = -0.000640662 Jy ! Total flux subtracted in 4096 components = -0.000618264 Jy ! Clean residual min=-0.000667 max=0.000808 Jy/beam ! Clean residual mean=0.000003 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0749212 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 322 components and 0.0749211 Jy ![Exited script file: muppet] wmap "J1125-3557_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.959 at -2.642 degrees (North through East) ! Clean map min=-0.001361 max=0.055605 Jy/beam ! Writing clean map to FITS file: J1125-3557_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0556054 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197004 device "J1125-3557_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1125-3557_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06287 1.06287 2.12573 4.25147 8.50294 17.0059 34.0118 68.0235 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.959 at -2.642 degrees (North through East) ! Clean map min=-0.001361 max=0.055605 Jy/beam quit ! Quitting program ! Log file J1125-3557_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:52:17 2016