! Started logfile: J1115-3059_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:51:52 2016
obs J1115-3059_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J1115-3059_S_2014_06_09_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.603071 visibilities/baseline/integration-bin.
! Found source: J1115-3059
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 13352 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1115-3059_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 328 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 328 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 388 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 328 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.927754Jy  sigma=0.007792
! Fit after  self-cal, rms=0.907389Jy  sigma=0.007674
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.887 mas, bmaj=14.93 mas, bpa=23.31 degrees
! Estimated noise=2142.82 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0757626 Jy
! Component: 100  -  total flux cleaned = 0.0941497 Jy
! Total flux subtracted in 100 components = 0.0941497 Jy
! Clean residual min=-0.005386 max=0.007715 Jy/beam
! Clean residual mean=-0.000033 rms=0.001590 Jy/beam
! Combined flux in latest and established models = 0.0941497 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0941497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108930Jy  sigma=0.000777
! Fit after  self-cal, rms=0.108893Jy  sigma=0.000776
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=18.25 mas, bpa=21.36 degrees
! Estimated noise=810.689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111346 Jy
! Component: 100  -  total flux cleaned = 0.0170435 Jy
! Component: 150  -  total flux cleaned = 0.0204438 Jy
! Component: 200  -  total flux cleaned = 0.0224236 Jy
! Total flux subtracted in 200 components = 0.0224236 Jy
! Clean residual min=-0.003858 max=0.004825 Jy/beam
! Clean residual mean=-0.000003 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.116573 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 48 components and 0.116573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107807Jy  sigma=0.000766
! Fit after  self-cal, rms=0.107705Jy  sigma=0.000765
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.81     HN        1.07     KP        1.05     
!   LA        1.22     MK        1.00*    NL        0.95     OV        0.94     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     HN        1.26     KP        1.04     
!   LA        1.11     MK        1.00*    NL        1.11     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        1.04     KP        0.95     
!   LA        0.86     MK        1.00*    NL        0.93     OV        0.92     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HN        1.24     KP        0.89     
!   LA        0.88     MK        1.00*    NL        1.09     OV        0.97     
!   PT        1.05     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.107705Jy  sigma=0.000765
! Fit after  self-cal, rms=0.112060Jy  sigma=0.000758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.89 mas, bmaj=18.47 mas, bpa=21.44 degrees
! Estimated noise=807.315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245911 Jy
! Component: 100  -  total flux cleaned = -0.00032367 Jy
! Component: 150  -  total flux cleaned = -0.000357923 Jy
! Component: 200  -  total flux cleaned = -0.000358256 Jy
! Total flux subtracted in 200 components = -0.000358256 Jy
! Clean residual min=-0.003134 max=0.003669 Jy/beam
! Clean residual mean=-0.000032 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.116215 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 54 components and 0.116215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112025Jy  sigma=0.000758
! Fit after  self-cal, rms=0.112098Jy  sigma=0.000758
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112098Jy  sigma=0.000758
! Fit after  self-cal, rms=0.113101Jy  sigma=0.000757
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.885 mas, bmaj=18.46 mas, bpa=21.44 degrees
! Estimated noise=805.506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231178 Jy
! Component: 100  -  total flux cleaned = -0.000202158 Jy
! Component: 150  -  total flux cleaned = -0.000202161 Jy
! Component: 200  -  total flux cleaned = -0.000177802 Jy
! Total flux subtracted in 200 components = -0.000177802 Jy
! Clean residual min=-0.003015 max=0.003458 Jy/beam
! Clean residual mean=-0.000026 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.116037 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.116037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113077Jy  sigma=0.000757
! Fit after  self-cal, rms=0.113067Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.5, 127.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339894 Jy
! Component: 100  -  total flux cleaned = 0.00489636 Jy
! Component: 150  -  total flux cleaned = 0.00560633 Jy
! Component: 200  -  total flux cleaned = 0.00586637 Jy
! Total flux subtracted in 200 components = 0.00586637 Jy
! Clean residual min=-0.002621 max=0.002342 Jy/beam
! Clean residual mean=-0.000008 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.121904 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.121904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112976Jy  sigma=0.000756
! Fit after  self-cal, rms=0.112944Jy  sigma=0.000756
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112944Jy  sigma=0.000756
! Fit after  self-cal, rms=0.112863Jy  sigma=0.000756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.876 mas, bmaj=18.41 mas, bpa=21.47 degrees
! Estimated noise=802.179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012126 Jy
! Component: 100  -  total flux cleaned = 0.00145708 Jy
! Component: 150  -  total flux cleaned = 0.00150798 Jy
! Component: 200  -  total flux cleaned = 0.00150748 Jy
! Total flux subtracted in 200 components = 0.00150748 Jy
! Clean residual min=-0.002459 max=0.002478 Jy/beam
! Clean residual mean=0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.123411 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 96 components and 0.123411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112840Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112844Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10, 121.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118676 Jy
! Component: 100  -  total flux cleaned = 0.000940349 Jy
! Component: 150  -  total flux cleaned = 0.000976279 Jy
! Component: 200  -  total flux cleaned = 0.00120331 Jy
! Total flux subtracted in 200 components = 0.00120331 Jy
! Clean residual min=-0.002416 max=0.001896 Jy/beam
! Clean residual mean=0.000004 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.124614 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 116 components and 0.124614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112785Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112792Jy  sigma=0.000755
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112792Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112007Jy  sigma=0.000755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.833 mas, bmaj=29.06 mas, bpa=8.415 degrees
! Estimated noise=879.248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000406947 Jy
! Component: 100  -  total flux cleaned = 0.000448599 Jy
! Component: 150  -  total flux cleaned = 0.000352904 Jy
! Component: 200  -  total flux cleaned = 0.000178853 Jy
! Total flux subtracted in 200 components = 0.000178853 Jy
! Clean residual min=-0.001670 max=0.002089 Jy/beam
! Clean residual mean=0.000010 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.124793 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 133 components and 0.124793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111990Jy  sigma=0.000755
! Fit after  self-cal, rms=0.111996Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.30428e-05 Jy
! Component: 100  -  total flux cleaned = -0.000186111 Jy
! Component: 150  -  total flux cleaned = -0.00030778 Jy
! Component: 200  -  total flux cleaned = -0.000383798 Jy
! Total flux subtracted in 200 components = -0.000383798 Jy
! Clean residual min=-0.001634 max=0.002075 Jy/beam
! Clean residual mean=0.000011 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.124409 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 139 components and 0.124409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111985Jy  sigma=0.000755
! Fit after  self-cal, rms=0.111990Jy  sigma=0.000755
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=18.4 mas, bpa=21.49 degrees
! Estimated noise=798.731 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.872 x 18.4 at 21.49 degrees (North through East)
! Clean map  min=-0.0022958  max=0.094356 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=15.37 mas, bpa=22.95 degrees
! Estimated noise=1202.91 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0738089 Jy
! Component: 100  -  total flux cleaned = 0.0921154 Jy
! Component: 150  -  total flux cleaned = 0.100925 Jy
! Component: 200  -  total flux cleaned = 0.106412 Jy
! Total flux subtracted in 200 components = 0.106412 Jy
! Clean residual min=-0.004870 max=0.003765 Jy/beam
! Clean residual mean=-0.000026 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.106412 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.106412 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=18.4 mas, bpa=21.49 degrees
! Estimated noise=798.731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556346 Jy
! Component: 100  -  total flux cleaned = 0.00926599 Jy
! Component: 150  -  total flux cleaned = 0.0115187 Jy
! Component: 200  -  total flux cleaned = 0.0133513 Jy
! Total flux subtracted in 200 components = 0.0133513 Jy
! Clean residual min=-0.002997 max=0.002740 Jy/beam
! Clean residual mean=-0.000017 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.119763 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 68 components and 0.119763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.833 mas, bmaj=29.06 mas, bpa=8.415 degrees
! Estimated noise=879.248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159534 Jy
! Component: 100  -  total flux cleaned = 0.0026639 Jy
! Component: 150  -  total flux cleaned = 0.00312819 Jy
! Component: 200  -  total flux cleaned = 0.00321367 Jy
! Total flux subtracted in 200 components = 0.00321367 Jy
! Clean residual min=-0.001967 max=0.002053 Jy/beam
! Clean residual mean=0.000001 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.122977 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114422 Jy
! Component: 100  -  total flux cleaned = 0.000180519 Jy
! Component: 150  -  total flux cleaned = 0.000117291 Jy
! Component: 200  -  total flux cleaned = 8.93177e-05 Jy
! Total flux subtracted in 200 components = 8.93177e-05 Jy
! Clean residual min=-0.001858 max=0.002036 Jy/beam
! Clean residual mean=0.000004 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.123066 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 92 components and 0.123066 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.872 mas, bmaj=18.4 mas, bpa=21.49 degrees
! Estimated noise=798.731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127918 Jy
! Component: 100  -  total flux cleaned = -8.84087e-05 Jy
! Component: 150  -  total flux cleaned = 0.00026068 Jy
! Component: 200  -  total flux cleaned = 0.000400669 Jy
! Total flux subtracted in 200 components = 0.000400669 Jy
! Clean residual min=-0.002482 max=0.001877 Jy/beam
! Clean residual mean=0.000004 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.123467 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.123467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111978Jy  sigma=0.000755
! Fit after  self-cal, rms=0.111969Jy  sigma=0.000755
wmodel J1115-3059_S_2014_06_09_pus_map.mod
! Writing 111 model components to file: J1115-3059_S_2014_06_09_pus_map.mod
wobs J1115-3059_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J1115-3059_S_2014_06_09_pus_uvs.fits
wwins J1115-3059_S_2014_06_09_pus_map.win
! wwins: Wrote 3 windows to J1115-3059_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000601025 Jy
! Component: 100  -  total flux cleaned = -0.000471662 Jy
! Component: 150  -  total flux cleaned = -0.000380776 Jy
! Component: 200  -  total flux cleaned = -0.000264053 Jy
! Component: 250  -  total flux cleaned = -0.000124071 Jy
! Component: 300  -  total flux cleaned = -9.65909e-05 Jy
! Component: 350  -  total flux cleaned = 3.29289e-05 Jy
! Component: 400  -  total flux cleaned = 3.2708e-05 Jy
! Component: 450  -  total flux cleaned = 5.72133e-05 Jy
! Component: 500  -  total flux cleaned = 0.000104498 Jy
! Component: 550  -  total flux cleaned = 5.81783e-05 Jy
! Component: 600  -  total flux cleaned = -9.74382e-06 Jy
! Component: 650  -  total flux cleaned = 1.27458e-05 Jy
! Component: 700  -  total flux cleaned = 1.23781e-05 Jy
! Component: 750  -  total flux cleaned = -3.004e-05 Jy
! Component: 800  -  total flux cleaned = -2.94915e-05 Jy
! Component: 850  -  total flux cleaned = 3.21787e-05 Jy
! Component: 900  -  total flux cleaned = 5.23999e-05 Jy
! Component: 950  -  total flux cleaned = 0.000152258 Jy
! Component: 1000  -  total flux cleaned = 0.000250714 Jy
! Component: 1050  -  total flux cleaned = 0.000366919 Jy
! Component: 1100  -  total flux cleaned = 0.00042424 Jy
! Component: 1150  -  total flux cleaned = 0.00048047 Jy
! Component: 1200  -  total flux cleaned = 0.000554794 Jy
! Component: 1250  -  total flux cleaned = 0.000609678 Jy
! Component: 1300  -  total flux cleaned = 0.00071807 Jy
! Component: 1350  -  total flux cleaned = 0.000735709 Jy
! Component: 1400  -  total flux cleaned = 0.000840953 Jy
! Component: 1450  -  total flux cleaned = 0.000823737 Jy
! Component: 1500  -  total flux cleaned = 0.000892251 Jy
! Component: 1550  -  total flux cleaned = 0.000892464 Jy
! Component: 1600  -  total flux cleaned = 0.000926182 Jy
! Component: 1650  -  total flux cleaned = 0.00102553 Jy
! Component: 1700  -  total flux cleaned = 0.00110717 Jy
! Component: 1750  -  total flux cleaned = 0.00110688 Jy
! Component: 1800  -  total flux cleaned = 0.0011867 Jy
! Component: 1850  -  total flux cleaned = 0.00121829 Jy
! Component: 1900  -  total flux cleaned = 0.00124961 Jy
! Component: 1950  -  total flux cleaned = 0.00132713 Jy
! Component: 2000  -  total flux cleaned = 0.00137302 Jy
! Component: 2050  -  total flux cleaned = 0.00137294 Jy
! Component: 2100  -  total flux cleaned = 0.001388 Jy
! Component: 2150  -  total flux cleaned = 0.00141803 Jy
! Component: 2200  -  total flux cleaned = 0.00141792 Jy
! Component: 2250  -  total flux cleaned = 0.00140332 Jy
! Component: 2300  -  total flux cleaned = 0.00143227 Jy
! Component: 2350  -  total flux cleaned = 0.00143225 Jy
! Component: 2400  -  total flux cleaned = 0.00137527 Jy
! Component: 2450  -  total flux cleaned = 0.00143173 Jy
! Component: 2500  -  total flux cleaned = 0.00143174 Jy
! Component: 2550  -  total flux cleaned = 0.0014597 Jy
! Component: 2600  -  total flux cleaned = 0.00145969 Jy
! Component: 2650  -  total flux cleaned = 0.00148696 Jy
! Component: 2700  -  total flux cleaned = 0.00144623 Jy
! Component: 2750  -  total flux cleaned = 0.00149994 Jy
! Component: 2800  -  total flux cleaned = 0.00148636 Jy
! Component: 2850  -  total flux cleaned = 0.00147302 Jy
! Component: 2900  -  total flux cleaned = 0.00151229 Jy
! Component: 2950  -  total flux cleaned = 0.0015251 Jy
! Component: 3000  -  total flux cleaned = 0.00152504 Jy
! Component: 3050  -  total flux cleaned = 0.00155064 Jy
! Component: 3100  -  total flux cleaned = 0.00156339 Jy
! Component: 3150  -  total flux cleaned = 0.00160131 Jy
! Component: 3200  -  total flux cleaned = 0.00157618 Jy
! Component: 3250  -  total flux cleaned = 0.0016012 Jy
! Component: 3300  -  total flux cleaned = 0.00157655 Jy
! Component: 3350  -  total flux cleaned = 0.00160108 Jy
! Component: 3400  -  total flux cleaned = 0.00162546 Jy
! Component: 3450  -  total flux cleaned = 0.00157706 Jy
! Component: 3500  -  total flux cleaned = 0.00158915 Jy
! Component: 3550  -  total flux cleaned = 0.00160103 Jy
! Component: 3600  -  total flux cleaned = 0.00163659 Jy
! Component: 3650  -  total flux cleaned = 0.00163654 Jy
! Component: 3700  -  total flux cleaned = 0.00163644 Jy
! Component: 3750  -  total flux cleaned = 0.00162478 Jy
! Component: 3800  -  total flux cleaned = 0.00165953 Jy
! Component: 3850  -  total flux cleaned = 0.0016366 Jy
! Component: 3900  -  total flux cleaned = 0.00165947 Jy
! Component: 3950  -  total flux cleaned = 0.00165947 Jy
! Component: 4000  -  total flux cleaned = 0.00165948 Jy
! Component: 4050  -  total flux cleaned = 0.00169321 Jy
! Total flux subtracted in 4096 components = 0.00171551 Jy
! Clean residual min=-0.000716 max=0.000991 Jy/beam
! Clean residual mean=0.000003 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.125182 Jy
keep
! Adding 241 model components to the UV plane model.
! The established model now contains 352 components and 0.125182 Jy
![Exited script file: muppet]
wmap "J1115-3059_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.872 x 18.4 at 21.49 degrees (North through East)
! Clean map  min=-0.0019422  max=0.093916 Jy/beam
! Writing clean map to FITS file: J1115-3059_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.093916 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000207937 
device "J1115-3059_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1115-3059_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.664222 0.664222 1.32844 2.65689 5.31378 10.6276 21.2551 42.5102 85.0204
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.093 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.872 x 18.4 at 21.49 degrees (North through East)
! Clean map  min=-0.0019422  max=0.093916 Jy/beam
quit
! Quitting program
! Log file J1115-3059_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:51:57 2016