! Started logfile: J0948+0022_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:50:19 2016 obs J0948+0022_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0948+0022_S_2014_06_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784153 visibilities/baseline/integration-bin. ! Found source: J0948+0022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0948+0022_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875988Jy sigma=0.009782 ! Fit after self-cal, rms=0.831851Jy sigma=0.009313 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=7.527 mas, bpa=-4.444 degrees ! Estimated noise=859.274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134493 Jy ! Component: 100 - total flux cleaned = 0.163963 Jy ! Total flux subtracted in 100 components = 0.163963 Jy ! Clean residual min=-0.011422 max=0.018698 Jy/beam ! Clean residual mean=0.000017 rms=0.003552 Jy/beam ! Combined flux in latest and established models = 0.163963 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.163963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095156Jy sigma=0.001026 ! Fit after self-cal, rms=0.095138Jy sigma=0.001025 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.567 mas, bpa=-5.573 degrees ! Estimated noise=492.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452628 Jy ! Component: 100 - total flux cleaned = 0.00470775 Jy ! Component: 150 - total flux cleaned = 0.00455128 Jy ! Component: 200 - total flux cleaned = 0.00443636 Jy ! Total flux subtracted in 200 components = 0.00443636 Jy ! Clean residual min=-0.010208 max=0.018391 Jy/beam ! Clean residual mean=0.000016 rms=0.004172 Jy/beam ! Combined flux in latest and established models = 0.168399 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.168399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094203Jy sigma=0.001020 ! Fit after self-cal, rms=0.094183Jy sigma=0.001020 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 0.91 KP 0.95 ! LA 1.09 MK 1.04 NL 0.88 OV 0.89 ! PT 1.61 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.95 KP 0.93 ! LA 1.06 MK 1.04 NL 0.99 OV 0.92 ! PT 1.61 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.94 KP 0.84 ! LA 0.82 MK 1.06 NL 0.95 OV 0.86 ! PT 1.58 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.94 KP 0.82 ! LA 0.80 MK 1.03 NL 0.96 OV 0.93 ! PT 1.54 SC 0.94 ! ! ! Fit before self-cal, rms=0.094183Jy sigma=0.001020 ! Fit after self-cal, rms=0.096763Jy sigma=0.000924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.466 mas, bpa=-5.196 degrees ! Estimated noise=486.681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014345 Jy ! Component: 100 - total flux cleaned = 0.000142636 Jy ! Component: 150 - total flux cleaned = 0.000163773 Jy ! Component: 200 - total flux cleaned = 0.00018503 Jy ! Total flux subtracted in 200 components = 0.00018503 Jy ! Clean residual min=-0.012311 max=0.012186 Jy/beam ! Clean residual mean=0.000019 rms=0.003141 Jy/beam ! Combined flux in latest and established models = 0.168584 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.168584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096742Jy sigma=0.000924 ! Fit after self-cal, rms=0.096940Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096940Jy sigma=0.000922 ! Fit after self-cal, rms=0.170789Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.469 mas, bpa=-5.332 degrees ! Estimated noise=487.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122596 Jy ! Component: 100 - total flux cleaned = -0.000148229 Jy ! Component: 150 - total flux cleaned = -0.000159423 Jy ! Component: 200 - total flux cleaned = -0.000158714 Jy ! Total flux subtracted in 200 components = -0.000158714 Jy ! Clean residual min=-0.001521 max=0.001775 Jy/beam ! Clean residual mean=0.000001 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.168425 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.168425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170785Jy sigma=0.000783 ! Fit after self-cal, rms=0.171402Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, -105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125237 Jy ! Component: 100 - total flux cleaned = 0.00157633 Jy ! Component: 150 - total flux cleaned = 0.00176315 Jy ! Component: 200 - total flux cleaned = 0.00188137 Jy ! Total flux subtracted in 200 components = 0.00188137 Jy ! Clean residual min=-0.001402 max=0.001623 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.170307 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.170307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171373Jy sigma=0.000781 ! Fit after self-cal, rms=0.171367Jy sigma=0.000781 ! Inverting map ! Added new window around map position (-115.5, 77). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848364 Jy ! Component: 100 - total flux cleaned = 0.000975714 Jy ! Component: 150 - total flux cleaned = 0.00108015 Jy ! Component: 200 - total flux cleaned = 0.00121846 Jy ! Total flux subtracted in 200 components = 0.00121846 Jy ! Clean residual min=-0.001355 max=0.001366 Jy/beam ! Clean residual mean=0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.171525 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.171525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171340Jy sigma=0.000781 ! Fit after self-cal, rms=0.171337Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171337Jy sigma=0.000781 ! Fit after self-cal, rms=0.176388Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.471 mas, bpa=-5.327 degrees ! Estimated noise=486.986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347102 Jy ! Component: 100 - total flux cleaned = 0.000458757 Jy ! Component: 150 - total flux cleaned = 0.000537801 Jy ! Component: 200 - total flux cleaned = 0.000555351 Jy ! Total flux subtracted in 200 components = 0.000555351 Jy ! Clean residual min=-0.001345 max=0.001361 Jy/beam ! Clean residual mean=0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.172081 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.172081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176375Jy sigma=0.000781 ! Fit after self-cal, rms=0.176383Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148686 Jy ! Component: 100 - total flux cleaned = 0.000247493 Jy ! Component: 150 - total flux cleaned = 0.000325172 Jy ! Component: 200 - total flux cleaned = 0.000398975 Jy ! Total flux subtracted in 200 components = 0.000398975 Jy ! Clean residual min=-0.001311 max=0.001363 Jy/beam ! Clean residual mean=0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.17248 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 94 components and 0.17248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176376Jy sigma=0.000781 ! Fit after self-cal, rms=0.176377Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176377Jy sigma=0.000781 ! Fit after self-cal, rms=0.176403Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.221 mas, bmaj=14.52 mas, bpa=-9.057 degrees ! Estimated noise=613.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218837 Jy ! Component: 100 - total flux cleaned = 0.000367895 Jy ! Component: 150 - total flux cleaned = 0.000468942 Jy ! Component: 200 - total flux cleaned = 0.00053211 Jy ! Total flux subtracted in 200 components = 0.00053211 Jy ! Clean residual min=-0.001321 max=0.001526 Jy/beam ! Clean residual mean=0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.173012 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 0.173012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176400Jy sigma=0.000781 ! Fit after self-cal, rms=0.176399Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108928 Jy ! Component: 100 - total flux cleaned = 0.000117406 Jy ! Component: 150 - total flux cleaned = 0.000150465 Jy ! Component: 200 - total flux cleaned = 0.00017359 Jy ! Total flux subtracted in 200 components = 0.00017359 Jy ! Clean residual min=-0.001332 max=0.001533 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.173185 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.173185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176397Jy sigma=0.000781 ! Fit after self-cal, rms=0.176397Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.47 mas, bpa=-5.319 degrees ! Estimated noise=487.014 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.47 at -5.319 degrees (North through East) ! Clean map min=-0.0012105 max=0.17034 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=7.461 mas, bpa=-4.005 degrees ! Estimated noise=845.165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132206 Jy ! Component: 100 - total flux cleaned = 0.161078 Jy ! Component: 150 - total flux cleaned = 0.167388 Jy ! Component: 200 - total flux cleaned = 0.168418 Jy ! Total flux subtracted in 200 components = 0.168418 Jy ! Clean residual min=-0.002503 max=0.002489 Jy/beam ! Clean residual mean=0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.168418 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.168418 Jy ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.47 mas, bpa=-5.319 degrees ! Estimated noise=487.014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144116 Jy ! Component: 100 - total flux cleaned = 0.0021972 Jy ! Component: 150 - total flux cleaned = 0.00244145 Jy ! Component: 200 - total flux cleaned = 0.00269377 Jy ! Total flux subtracted in 200 components = 0.00269377 Jy ! Clean residual min=-0.001487 max=0.001411 Jy/beam ! Clean residual mean=0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.171112 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.171112 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.221 mas, bmaj=14.52 mas, bpa=-9.057 degrees ! Estimated noise=613.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664776 Jy ! Component: 100 - total flux cleaned = 0.00106639 Jy ! Component: 150 - total flux cleaned = 0.00142045 Jy ! Component: 200 - total flux cleaned = 0.00171889 Jy ! Total flux subtracted in 200 components = 0.00171889 Jy ! Clean residual min=-0.001401 max=0.001421 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.172831 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159591 Jy ! Component: 100 - total flux cleaned = 0.000256656 Jy ! Component: 150 - total flux cleaned = 0.000344569 Jy ! Component: 200 - total flux cleaned = 0.000391602 Jy ! Total flux subtracted in 200 components = 0.000391602 Jy ! Clean residual min=-0.001399 max=0.001419 Jy/beam ! Clean residual mean=0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.173222 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.173222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.47 mas, bpa=-5.319 degrees ! Estimated noise=487.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23145e-05 Jy ! Component: 100 - total flux cleaned = -4.80415e-05 Jy ! Component: 150 - total flux cleaned = -0.000171156 Jy ! Component: 200 - total flux cleaned = -0.000254273 Jy ! Total flux subtracted in 200 components = -0.000254273 Jy ! Clean residual min=-0.001367 max=0.001348 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.172968 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.172968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176415Jy sigma=0.000781 ! Fit after self-cal, rms=0.176421Jy sigma=0.000781 wmodel J0948+0022_S_2014_06_09_pus_map.mod ! Writing 72 model components to file: J0948+0022_S_2014_06_09_pus_map.mod wobs J0948+0022_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0948+0022_S_2014_06_09_pus_uvs.fits wwins J0948+0022_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0948+0022_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.52375e-06 Jy ! Component: 100 - total flux cleaned = -1.87939e-05 Jy ! Component: 150 - total flux cleaned = -0.000146721 Jy ! Component: 200 - total flux cleaned = -0.000249317 Jy ! Component: 250 - total flux cleaned = -0.00032846 Jy ! Component: 300 - total flux cleaned = -0.000251279 Jy ! Component: 350 - total flux cleaned = -0.000289632 Jy ! Component: 400 - total flux cleaned = -0.000271449 Jy ! Component: 450 - total flux cleaned = -0.000199779 Jy ! Component: 500 - total flux cleaned = -0.000147279 Jy ! Component: 550 - total flux cleaned = -9.60692e-05 Jy ! Component: 600 - total flux cleaned = -6.27323e-05 Jy ! Component: 650 - total flux cleaned = -4.66056e-05 Jy ! Component: 700 - total flux cleaned = -3.0676e-05 Jy ! Component: 750 - total flux cleaned = -4.6739e-05 Jy ! Component: 800 - total flux cleaned = -3.1022e-05 Jy ! Component: 850 - total flux cleaned = -4.64605e-05 Jy ! Component: 900 - total flux cleaned = -6.20788e-05 Jy ! Component: 950 - total flux cleaned = -9.26703e-05 Jy ! Component: 1000 - total flux cleaned = -0.000137729 Jy ! Component: 1050 - total flux cleaned = -0.000152373 Jy ! Component: 1100 - total flux cleaned = -0.000195936 Jy ! Component: 1150 - total flux cleaned = -0.000224705 Jy ! Component: 1200 - total flux cleaned = -0.000239086 Jy ! Component: 1250 - total flux cleaned = -0.00026737 Jy ! Component: 1300 - total flux cleaned = -0.000267454 Jy ! Component: 1350 - total flux cleaned = -0.000267511 Jy ! Component: 1400 - total flux cleaned = -0.000322003 Jy ! Component: 1450 - total flux cleaned = -0.000335482 Jy ! Component: 1500 - total flux cleaned = -0.000388945 Jy ! Component: 1550 - total flux cleaned = -0.000402201 Jy ! Component: 1600 - total flux cleaned = -0.000454466 Jy ! Component: 1650 - total flux cleaned = -0.000506385 Jy ! Component: 1700 - total flux cleaned = -0.000493553 Jy ! Component: 1750 - total flux cleaned = -0.000595071 Jy ! Component: 1800 - total flux cleaned = -0.000620362 Jy ! Component: 1850 - total flux cleaned = -0.000657899 Jy ! Component: 1900 - total flux cleaned = -0.000707221 Jy ! Component: 1950 - total flux cleaned = -0.000756112 Jy ! Component: 2000 - total flux cleaned = -0.000768221 Jy ! Component: 2050 - total flux cleaned = -0.000816413 Jy ! Component: 2100 - total flux cleaned = -0.000876158 Jy ! Component: 2150 - total flux cleaned = -0.000911483 Jy ! Component: 2200 - total flux cleaned = -0.000923378 Jy ! Component: 2250 - total flux cleaned = -0.000993154 Jy ! Component: 2300 - total flux cleaned = -0.00102766 Jy ! Component: 2350 - total flux cleaned = -0.0010619 Jy ! Component: 2400 - total flux cleaned = -0.00108449 Jy ! Component: 2450 - total flux cleaned = -0.00110705 Jy ! Component: 2500 - total flux cleaned = -0.00110709 Jy ! Component: 2550 - total flux cleaned = -0.00115143 Jy ! Component: 2600 - total flux cleaned = -0.00119539 Jy ! Component: 2650 - total flux cleaned = -0.00121716 Jy ! Component: 2700 - total flux cleaned = -0.00128208 Jy ! Component: 2750 - total flux cleaned = -0.00128202 Jy ! Component: 2800 - total flux cleaned = -0.00129277 Jy ! Component: 2850 - total flux cleaned = -0.00131399 Jy ! Component: 2900 - total flux cleaned = -0.0013246 Jy ! Component: 2950 - total flux cleaned = -0.00138737 Jy ! Component: 3000 - total flux cleaned = -0.00139776 Jy ! Component: 3050 - total flux cleaned = -0.00139778 Jy ! Component: 3100 - total flux cleaned = -0.0014082 Jy ! Component: 3150 - total flux cleaned = -0.0014388 Jy ! Component: 3200 - total flux cleaned = -0.00143882 Jy ! Component: 3250 - total flux cleaned = -0.00145895 Jy ! Component: 3300 - total flux cleaned = -0.00151901 Jy ! Component: 3350 - total flux cleaned = -0.00151897 Jy ! Component: 3400 - total flux cleaned = -0.00156837 Jy ! Component: 3450 - total flux cleaned = -0.00159784 Jy ! Component: 3500 - total flux cleaned = -0.00160757 Jy ! Component: 3550 - total flux cleaned = -0.00164644 Jy ! Component: 3600 - total flux cleaned = -0.00163688 Jy ! Component: 3650 - total flux cleaned = -0.00170405 Jy ! Component: 3700 - total flux cleaned = -0.00169447 Jy ! Component: 3750 - total flux cleaned = -0.00174182 Jy ! Component: 3800 - total flux cleaned = -0.00177954 Jy ! Component: 3850 - total flux cleaned = -0.00176083 Jy ! Component: 3900 - total flux cleaned = -0.00178885 Jy ! Component: 3950 - total flux cleaned = -0.00181669 Jy ! Component: 4000 - total flux cleaned = -0.00181682 Jy ! Component: 4050 - total flux cleaned = -0.00183518 Jy ! Total flux subtracted in 4096 components = -0.00188992 Jy ! Clean residual min=-0.000567 max=0.000567 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.171078 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 334 components and 0.171078 Jy ![Exited script file: muppet] wmap "J0948+0022_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.47 at -5.319 degrees (North through East) ! Clean map min=-0.0010106 max=0.16922 Jy/beam ! Writing clean map to FITS file: J0948+0022_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168883 device "J0948+0022_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0948+0022_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.29941 0.29941 0.59882 1.19764 2.39528 4.79056 9.58113 19.1623 38.3245 76.649 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.47 at -5.319 degrees (North through East) ! Clean map min=-0.0010106 max=0.16922 Jy/beam quit ! Quitting program ! Log file J0948+0022_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:50:23 2016