! Started logfile: J0834+6019_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:49:09 2016 obs J0834+6019_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0834+6019_S_2014_06_09_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615529 visibilities/baseline/integration-bin. ! Found source: J0834+6019 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 9196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0834+6019_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911934Jy sigma=0.009903 ! Fit after self-cal, rms=0.897711Jy sigma=0.009757 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=5.355 mas, bpa=-74.73 degrees ! Estimated noise=1247.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798149 Jy ! Component: 100 - total flux cleaned = 0.0989411 Jy ! Total flux subtracted in 100 components = 0.0989411 Jy ! Clean residual min=-0.004915 max=0.007110 Jy/beam ! Clean residual mean=-0.000042 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.0989411 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0989411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084501Jy sigma=0.000788 ! Fit after self-cal, rms=0.084476Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=6.478 mas, bpa=-78.13 degrees ! Estimated noise=697.032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898983 Jy ! Component: 100 - total flux cleaned = 0.0129663 Jy ! Component: 150 - total flux cleaned = 0.0149865 Jy ! Component: 200 - total flux cleaned = 0.0160793 Jy ! Total flux subtracted in 200 components = 0.0160793 Jy ! Clean residual min=-0.003664 max=0.005550 Jy/beam ! Clean residual mean=0.000034 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.11502 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.11502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083489Jy sigma=0.000779 ! Fit after self-cal, rms=0.083505Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.96 KP 0.99 ! LA 1.17 MK 1.70 NL 0.98 OV 0.98 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.00 KP 1.02 ! LA 1.15 MK 0.96 NL 1.04 OV 1.00 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.35 HN 1.03 KP 0.90 ! LA 0.85 MK 1.02 NL 0.99 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00 KP 0.88 ! LA 0.85 MK 0.99 NL 1.07 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.083505Jy sigma=0.000779 ! Fit after self-cal, rms=0.093500Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=6.5 mas, bpa=-78.71 degrees ! Estimated noise=700.909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143084 Jy ! Component: 100 - total flux cleaned = 0.00152149 Jy ! Component: 150 - total flux cleaned = 0.00154618 Jy ! Component: 200 - total flux cleaned = 0.00156825 Jy ! Total flux subtracted in 200 components = 0.00156825 Jy ! Clean residual min=-0.003845 max=0.003662 Jy/beam ! Clean residual mean=0.000019 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.116589 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.116589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093448Jy sigma=0.000766 ! Fit after self-cal, rms=0.093569Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093569Jy sigma=0.000766 ! Fit after self-cal, rms=0.089360Jy sigma=0.000758 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=6.538 mas, bpa=-78.38 degrees ! Estimated noise=701.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316827 Jy ! Component: 100 - total flux cleaned = 0.000236851 Jy ! Component: 150 - total flux cleaned = 0.000155807 Jy ! Component: 200 - total flux cleaned = 0.000109093 Jy ! Total flux subtracted in 200 components = 0.000109093 Jy ! Clean residual min=-0.002061 max=0.002430 Jy/beam ! Clean residual mean=0.000021 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.116698 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.116698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089334Jy sigma=0.000758 ! Fit after self-cal, rms=0.089316Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-88.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235348 Jy ! Component: 100 - total flux cleaned = 0.00279054 Jy ! Component: 150 - total flux cleaned = 0.00306988 Jy ! Component: 200 - total flux cleaned = 0.00322537 Jy ! Total flux subtracted in 200 components = 0.00322537 Jy ! Clean residual min=-0.001724 max=0.002053 Jy/beam ! Clean residual mean=0.000011 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.119923 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 73 components and 0.119923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089239Jy sigma=0.000757 ! Fit after self-cal, rms=0.089214Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089214Jy sigma=0.000757 ! Fit after self-cal, rms=0.089122Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=6.553 mas, bpa=-78.35 degrees ! Estimated noise=700.934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695931 Jy ! Component: 100 - total flux cleaned = 0.000826022 Jy ! Component: 150 - total flux cleaned = 0.000881016 Jy ! Component: 200 - total flux cleaned = 0.00083202 Jy ! Total flux subtracted in 200 components = 0.00083202 Jy ! Clean residual min=-0.001639 max=0.001833 Jy/beam ! Clean residual mean=0.000011 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.120755 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.120755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089103Jy sigma=0.000756 ! Fit after self-cal, rms=0.089095Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.9947e-05 Jy ! Component: 100 - total flux cleaned = 8.07741e-05 Jy ! Component: 150 - total flux cleaned = 6.10308e-05 Jy ! Component: 200 - total flux cleaned = 6.12257e-05 Jy ! Total flux subtracted in 200 components = 6.12257e-05 Jy ! Clean residual min=-0.001663 max=0.001799 Jy/beam ! Clean residual mean=0.000012 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.120816 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.120816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089084Jy sigma=0.000756 ! Fit after self-cal, rms=0.089081Jy sigma=0.000756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089081Jy sigma=0.000756 ! Fit after self-cal, rms=0.089100Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.666 mas, bmaj=11.78 mas, bpa=82.76 degrees ! Estimated noise=841.961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019695 Jy ! Component: 100 - total flux cleaned = 0.000198484 Jy ! Component: 150 - total flux cleaned = 0.000197793 Jy ! Component: 200 - total flux cleaned = 0.000179605 Jy ! Total flux subtracted in 200 components = 0.000179605 Jy ! Clean residual min=-0.001811 max=0.002001 Jy/beam ! Clean residual mean=0.000022 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.120996 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.120996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089096Jy sigma=0.000756 ! Fit after self-cal, rms=0.089095Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.74755e-05 Jy ! Component: 100 - total flux cleaned = -8.35128e-05 Jy ! Component: 150 - total flux cleaned = -0.000113257 Jy ! Component: 200 - total flux cleaned = -0.000140859 Jy ! Total flux subtracted in 200 components = -0.000140859 Jy ! Clean residual min=-0.001769 max=0.001966 Jy/beam ! Clean residual mean=0.000023 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.120855 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.120855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089098Jy sigma=0.000756 ! Fit after self-cal, rms=0.089099Jy sigma=0.000756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.559 mas, bpa=-78.38 degrees ! Estimated noise=701.411 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.559 at -78.38 degrees (North through East) ! Clean map min=-0.0026627 max=0.1048 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=5.43 mas, bpa=-75.07 degrees ! Estimated noise=1250.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798694 Jy ! Component: 100 - total flux cleaned = 0.0985987 Jy ! Component: 150 - total flux cleaned = 0.106177 Jy ! Component: 200 - total flux cleaned = 0.110612 Jy ! Total flux subtracted in 200 components = 0.110612 Jy ! Clean residual min=-0.003489 max=0.003964 Jy/beam ! Clean residual mean=-0.000002 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.110612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.110612 Jy ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.559 mas, bpa=-78.38 degrees ! Estimated noise=701.411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449914 Jy ! Component: 100 - total flux cleaned = 0.00718695 Jy ! Component: 150 - total flux cleaned = 0.00852894 Jy ! Component: 200 - total flux cleaned = 0.00933393 Jy ! Total flux subtracted in 200 components = 0.00933393 Jy ! Clean residual min=-0.001761 max=0.001882 Jy/beam ! Clean residual mean=0.000009 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.119945 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.119945 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.666 mas, bmaj=11.78 mas, bpa=82.76 degrees ! Estimated noise=841.961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773091 Jy ! Component: 100 - total flux cleaned = 0.000873991 Jy ! Component: 150 - total flux cleaned = 0.000910203 Jy ! Component: 200 - total flux cleaned = 0.000940443 Jy ! Total flux subtracted in 200 components = 0.000940443 Jy ! Clean residual min=-0.001917 max=0.002169 Jy/beam ! Clean residual mean=0.000021 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.120886 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.86289e-05 Jy ! Component: 100 - total flux cleaned = 0.000145645 Jy ! Component: 150 - total flux cleaned = 0.000203754 Jy ! Component: 200 - total flux cleaned = 0.000221919 Jy ! Total flux subtracted in 200 components = 0.000221919 Jy ! Clean residual min=-0.001837 max=0.002070 Jy/beam ! Clean residual mean=0.000019 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.121108 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 96 components and 0.121108 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.559 mas, bpa=-78.38 degrees ! Estimated noise=701.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109722 Jy ! Component: 100 - total flux cleaned = 0.000207568 Jy ! Component: 150 - total flux cleaned = 0.000291906 Jy ! Component: 200 - total flux cleaned = 0.000316755 Jy ! Total flux subtracted in 200 components = 0.000316755 Jy ! Clean residual min=-0.001695 max=0.001731 Jy/beam ! Clean residual mean=0.000010 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.121425 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 0.121425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089061Jy sigma=0.000756 ! Fit after self-cal, rms=0.089054Jy sigma=0.000756 wmodel J0834+6019_S_2014_06_09_pus_map.mod ! Writing 112 model components to file: J0834+6019_S_2014_06_09_pus_map.mod wobs J0834+6019_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0834+6019_S_2014_06_09_pus_uvs.fits wwins J0834+6019_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0834+6019_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383081 Jy ! Component: 100 - total flux cleaned = 0.000673059 Jy ! Component: 150 - total flux cleaned = 0.000755333 Jy ! Component: 200 - total flux cleaned = 0.000888294 Jy ! Component: 250 - total flux cleaned = 0.00109193 Jy ! Component: 300 - total flux cleaned = 0.0011409 Jy ! Component: 350 - total flux cleaned = 0.00114141 Jy ! Component: 400 - total flux cleaned = 0.00107298 Jy ! Component: 450 - total flux cleaned = 0.00105043 Jy ! Component: 500 - total flux cleaned = 0.00098546 Jy ! Component: 550 - total flux cleaned = 0.00102828 Jy ! Component: 600 - total flux cleaned = 0.00106982 Jy ! Component: 650 - total flux cleaned = 0.0010898 Jy ! Component: 700 - total flux cleaned = 0.0011493 Jy ! Component: 750 - total flux cleaned = 0.00118792 Jy ! Component: 800 - total flux cleaned = 0.00124585 Jy ! Component: 850 - total flux cleaned = 0.00135944 Jy ! Component: 900 - total flux cleaned = 0.0014155 Jy ! Component: 950 - total flux cleaned = 0.00148887 Jy ! Component: 1000 - total flux cleaned = 0.00150726 Jy ! Component: 1050 - total flux cleaned = 0.00159654 Jy ! Component: 1100 - total flux cleaned = 0.00170171 Jy ! Component: 1150 - total flux cleaned = 0.00168408 Jy ! Component: 1200 - total flux cleaned = 0.00175243 Jy ! Component: 1250 - total flux cleaned = 0.00180278 Jy ! Component: 1300 - total flux cleaned = 0.00175268 Jy ! Component: 1350 - total flux cleaned = 0.00176935 Jy ! Component: 1400 - total flux cleaned = 0.00178562 Jy ! Component: 1450 - total flux cleaned = 0.00181756 Jy ! Component: 1500 - total flux cleaned = 0.0018023 Jy ! Component: 1550 - total flux cleaned = 0.00181817 Jy ! Component: 1600 - total flux cleaned = 0.00187987 Jy ! Component: 1650 - total flux cleaned = 0.00187969 Jy ! Component: 1700 - total flux cleaned = 0.00186457 Jy ! Component: 1750 - total flux cleaned = 0.00187943 Jy ! Component: 1800 - total flux cleaned = 0.00187939 Jy ! Component: 1850 - total flux cleaned = 0.00185016 Jy ! Component: 1900 - total flux cleaned = 0.00183613 Jy ! Component: 1950 - total flux cleaned = 0.00182207 Jy ! Component: 2000 - total flux cleaned = 0.00183631 Jy ! Component: 2050 - total flux cleaned = 0.00182202 Jy ! Component: 2100 - total flux cleaned = 0.00178044 Jy ! Component: 2150 - total flux cleaned = 0.00172577 Jy ! Component: 2200 - total flux cleaned = 0.00171224 Jy ! Component: 2250 - total flux cleaned = 0.00168551 Jy ! Component: 2300 - total flux cleaned = 0.0016323 Jy ! Component: 2350 - total flux cleaned = 0.00161913 Jy ! Component: 2400 - total flux cleaned = 0.00160601 Jy ! Component: 2450 - total flux cleaned = 0.00157998 Jy ! Component: 2500 - total flux cleaned = 0.00154172 Jy ! Component: 2550 - total flux cleaned = 0.00155449 Jy ! Component: 2600 - total flux cleaned = 0.00154196 Jy ! Component: 2650 - total flux cleaned = 0.00152938 Jy ! Component: 2700 - total flux cleaned = 0.0015169 Jy ! Component: 2750 - total flux cleaned = 0.00147997 Jy ! Component: 2800 - total flux cleaned = 0.00148008 Jy ! Component: 2850 - total flux cleaned = 0.00146812 Jy ! Component: 2900 - total flux cleaned = 0.00146805 Jy ! Component: 2950 - total flux cleaned = 0.00145614 Jy ! Component: 3000 - total flux cleaned = 0.00145627 Jy ! Component: 3050 - total flux cleaned = 0.00149172 Jy ! Component: 3100 - total flux cleaned = 0.00149169 Jy ! Component: 3150 - total flux cleaned = 0.00150326 Jy ! Component: 3200 - total flux cleaned = 0.00152639 Jy ! Component: 3250 - total flux cleaned = 0.00153797 Jy ! Component: 3300 - total flux cleaned = 0.00156072 Jy ! Component: 3350 - total flux cleaned = 0.00157193 Jy ! Component: 3400 - total flux cleaned = 0.00157195 Jy ! Component: 3450 - total flux cleaned = 0.00152715 Jy ! Component: 3500 - total flux cleaned = 0.00151606 Jy ! Component: 3550 - total flux cleaned = 0.00151603 Jy ! Component: 3600 - total flux cleaned = 0.00150497 Jy ! Component: 3650 - total flux cleaned = 0.00145019 Jy ! Component: 3700 - total flux cleaned = 0.00146113 Jy ! Component: 3750 - total flux cleaned = 0.00147199 Jy ! Component: 3800 - total flux cleaned = 0.00146125 Jy ! Component: 3850 - total flux cleaned = 0.00143971 Jy ! Component: 3900 - total flux cleaned = 0.00140778 Jy ! Component: 3950 - total flux cleaned = 0.0014609 Jy ! Component: 4000 - total flux cleaned = 0.00142929 Jy ! Component: 4050 - total flux cleaned = 0.00142929 Jy ! Total flux subtracted in 4096 components = 0.00143967 Jy ! Clean residual min=-0.000612 max=0.000581 Jy/beam ! Clean residual mean=-0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.122864 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 370 components and 0.122864 Jy ![Exited script file: muppet] wmap "J0834+6019_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.559 at -78.38 degrees (North through East) ! Clean map min=-0.0025084 max=0.10378 Jy/beam ! Writing clean map to FITS file: J0834+6019_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178451 device "J0834+6019_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0834+6019_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.515854 0.515854 1.03171 2.06342 4.12683 8.25366 16.5073 33.0146 66.0293 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.559 at -78.38 degrees (North through East) ! Clean map min=-0.0025084 max=0.10378 Jy/beam quit ! Quitting program ! Log file J0834+6019_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:49:14 2016