! Started logfile: J0819+3226_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:48:45 2016 obs J0819+3226_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0819+3226_S_2014_06_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697271 visibilities/baseline/integration-bin. ! Found source: J0819+3226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 14308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0819+3226_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950318Jy sigma=0.011618 ! Fit after self-cal, rms=0.941699Jy sigma=0.011522 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=5.491 mas, bpa=-17.37 degrees ! Estimated noise=963.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460557 Jy ! Component: 100 - total flux cleaned = 0.0571153 Jy ! Total flux subtracted in 100 components = 0.0571153 Jy ! Clean residual min=-0.003714 max=0.004540 Jy/beam ! Clean residual mean=-0.000000 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0571154 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0571154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067926Jy sigma=0.000773 ! Fit after self-cal, rms=0.067905Jy sigma=0.000773 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=6.662 mas, bpa=-16.63 degrees ! Estimated noise=490.728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492896 Jy ! Component: 100 - total flux cleaned = 0.00698797 Jy ! Component: 150 - total flux cleaned = 0.00794921 Jy ! Component: 200 - total flux cleaned = 0.00817306 Jy ! Total flux subtracted in 200 components = 0.00817306 Jy ! Clean residual min=-0.001908 max=0.001921 Jy/beam ! Clean residual mean=0.000008 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0652884 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0652884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067562Jy sigma=0.000770 ! Fit after self-cal, rms=0.067565Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.94 KP 1.06 ! LA 1.16 MK 1.04 NL 0.96 OV 0.95 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.05 KP 1.03 ! LA 1.10 MK 1.08 NL 1.04 OV 1.00 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.04 KP 0.88 ! LA 0.92 MK 1.00 NL 0.97 OV 0.96 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.02 KP 0.87 ! LA 0.88 MK 1.08 NL 1.04 OV 0.97 ! PT 1.06 SC 0.92 ! ! ! Fit before self-cal, rms=0.067565Jy sigma=0.000769 ! Fit after self-cal, rms=0.066569Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=6.626 mas, bpa=-15.68 degrees ! Estimated noise=489.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023047 Jy ! Component: 100 - total flux cleaned = 0.000153433 Jy ! Component: 150 - total flux cleaned = 9.6422e-05 Jy ! Component: 200 - total flux cleaned = 8.5527e-05 Jy ! Total flux subtracted in 200 components = 8.5527e-05 Jy ! Clean residual min=-0.001471 max=0.001568 Jy/beam ! Clean residual mean=0.000003 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0653739 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.0653739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066559Jy sigma=0.000766 ! Fit after self-cal, rms=0.066565Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066565Jy sigma=0.000765 ! Fit after self-cal, rms=0.066306Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=6.642 mas, bpa=-15.86 degrees ! Estimated noise=490.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28803e-05 Jy ! Component: 100 - total flux cleaned = 4.84647e-05 Jy ! Component: 150 - total flux cleaned = 5.74943e-05 Jy ! Component: 200 - total flux cleaned = 6.47664e-05 Jy ! Total flux subtracted in 200 components = 6.47664e-05 Jy ! Clean residual min=-0.001361 max=0.001555 Jy/beam ! Clean residual mean=0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0654387 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0654387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066302Jy sigma=0.000765 ! Fit after self-cal, rms=0.066308Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108.5, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769847 Jy ! Component: 100 - total flux cleaned = 0.000682146 Jy ! Component: 150 - total flux cleaned = 0.000632029 Jy ! Component: 200 - total flux cleaned = 0.000548555 Jy ! Total flux subtracted in 200 components = 0.000548555 Jy ! Clean residual min=-0.001377 max=0.001263 Jy/beam ! Clean residual mean=0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0659873 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0659873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066274Jy sigma=0.000764 ! Fit after self-cal, rms=0.066270Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066270Jy sigma=0.000764 ! Fit after self-cal, rms=0.066190Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=6.641 mas, bpa=-15.82 degrees ! Estimated noise=489.569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.36929e-05 Jy ! Component: 100 - total flux cleaned = -9.27326e-05 Jy ! Component: 150 - total flux cleaned = -0.000148918 Jy ! Component: 200 - total flux cleaned = -0.000215778 Jy ! Total flux subtracted in 200 components = -0.000215778 Jy ! Clean residual min=-0.001350 max=0.001278 Jy/beam ! Clean residual mean=0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0657715 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0657715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066177Jy sigma=0.000764 ! Fit after self-cal, rms=0.066177Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40625e-05 Jy ! Component: 100 - total flux cleaned = -7.78439e-05 Jy ! Component: 150 - total flux cleaned = -0.000121534 Jy ! Component: 200 - total flux cleaned = -0.000135371 Jy ! Total flux subtracted in 200 components = -0.000135371 Jy ! Clean residual min=-0.001344 max=0.001284 Jy/beam ! Clean residual mean=0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0656361 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.0656361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066170Jy sigma=0.000764 ! Fit after self-cal, rms=0.066169Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066169Jy sigma=0.000764 ! Fit after self-cal, rms=0.066168Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=11.45 mas, bpa=-18.24 degrees ! Estimated noise=581.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.59428e-05 Jy ! Component: 100 - total flux cleaned = 8.0646e-05 Jy ! Component: 150 - total flux cleaned = 0.00012745 Jy ! Component: 200 - total flux cleaned = 0.000116945 Jy ! Total flux subtracted in 200 components = 0.000116945 Jy ! Clean residual min=-0.001386 max=0.001710 Jy/beam ! Clean residual mean=0.000005 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0657531 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.0657531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066166Jy sigma=0.000764 ! Fit after self-cal, rms=0.066164Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.43383e-05 Jy ! Component: 100 - total flux cleaned = 6.51918e-05 Jy ! Component: 150 - total flux cleaned = 6.55779e-05 Jy ! Component: 200 - total flux cleaned = 5.72028e-05 Jy ! Total flux subtracted in 200 components = 5.72028e-05 Jy ! Clean residual min=-0.001364 max=0.001703 Jy/beam ! Clean residual mean=0.000005 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0658103 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.0658103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066164Jy sigma=0.000764 ! Fit after self-cal, rms=0.066162Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=6.647 mas, bpa=-15.85 degrees ! Estimated noise=489.406 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.828 x 6.647 at -15.85 degrees (North through East) ! Clean map min=-0.0012479 max=0.059165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=5.453 mas, bpa=-16.5 degrees ! Estimated noise=962.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456085 Jy ! Component: 100 - total flux cleaned = 0.0571395 Jy ! Component: 150 - total flux cleaned = 0.0622759 Jy ! Component: 200 - total flux cleaned = 0.0650292 Jy ! Total flux subtracted in 200 components = 0.0650292 Jy ! Clean residual min=-0.003137 max=0.002926 Jy/beam ! Clean residual mean=-0.000001 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0650293 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0650293 Jy ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=6.647 mas, bpa=-15.85 degrees ! Estimated noise=489.406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692855 Jy ! Component: 100 - total flux cleaned = 0.000779393 Jy ! Component: 150 - total flux cleaned = 0.000817876 Jy ! Component: 200 - total flux cleaned = 0.000785723 Jy ! Total flux subtracted in 200 components = 0.000785723 Jy ! Clean residual min=-0.001298 max=0.001366 Jy/beam ! Clean residual mean=0.000003 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.065815 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.065815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=11.45 mas, bpa=-18.24 degrees ! Estimated noise=581.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032057 Jy ! Component: 100 - total flux cleaned = 0.000317259 Jy ! Component: 150 - total flux cleaned = 0.000230596 Jy ! Component: 200 - total flux cleaned = 0.000231238 Jy ! Total flux subtracted in 200 components = 0.000231238 Jy ! Clean residual min=-0.001358 max=0.001739 Jy/beam ! Clean residual mean=0.000005 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0660462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34548e-05 Jy ! Component: 100 - total flux cleaned = -2.6259e-05 Jy ! Component: 150 - total flux cleaned = -4.93679e-05 Jy ! Component: 200 - total flux cleaned = -5.99199e-05 Jy ! Total flux subtracted in 200 components = -5.99199e-05 Jy ! Clean residual min=-0.001349 max=0.001722 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0659863 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.0659863 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=6.647 mas, bpa=-15.85 degrees ! Estimated noise=489.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016026 Jy ! Component: 100 - total flux cleaned = 6.49659e-05 Jy ! Component: 150 - total flux cleaned = 2.54189e-06 Jy ! Component: 200 - total flux cleaned = -3.51732e-05 Jy ! Total flux subtracted in 200 components = -3.51732e-05 Jy ! Clean residual min=-0.001303 max=0.001266 Jy/beam ! Clean residual mean=0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0659511 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.0659511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066168Jy sigma=0.000764 ! Fit after self-cal, rms=0.066170Jy sigma=0.000764 wmodel J0819+3226_S_2014_06_09_pus_map.mod ! Writing 73 model components to file: J0819+3226_S_2014_06_09_pus_map.mod wobs J0819+3226_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0819+3226_S_2014_06_09_pus_uvs.fits wwins J0819+3226_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0819+3226_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.87495e-05 Jy ! Component: 100 - total flux cleaned = 0.00017776 Jy ! Component: 150 - total flux cleaned = 0.000264732 Jy ! Component: 200 - total flux cleaned = 0.000306484 Jy ! Component: 250 - total flux cleaned = 0.00030642 Jy ! Component: 300 - total flux cleaned = 0.000268373 Jy ! Component: 350 - total flux cleaned = 0.000212305 Jy ! Component: 400 - total flux cleaned = 0.000121685 Jy ! Component: 450 - total flux cleaned = -1.407e-06 Jy ! Component: 500 - total flux cleaned = -6.94701e-05 Jy ! Component: 550 - total flux cleaned = -0.000219553 Jy ! Component: 600 - total flux cleaned = -0.000268082 Jy ! Component: 650 - total flux cleaned = -0.000411691 Jy ! Component: 700 - total flux cleaned = -0.000520191 Jy ! Component: 750 - total flux cleaned = -0.000611293 Jy ! Component: 800 - total flux cleaned = -0.000670944 Jy ! Component: 850 - total flux cleaned = -0.000787621 Jy ! Component: 900 - total flux cleaned = -0.00080171 Jy ! Component: 950 - total flux cleaned = -0.000914054 Jy ! Component: 1000 - total flux cleaned = -0.00101023 Jy ! Component: 1050 - total flux cleaned = -0.0010506 Jy ! Component: 1100 - total flux cleaned = -0.00114384 Jy ! Component: 1150 - total flux cleaned = -0.00119615 Jy ! Component: 1200 - total flux cleaned = -0.00120906 Jy ! Component: 1250 - total flux cleaned = -0.00122173 Jy ! Component: 1300 - total flux cleaned = -0.0012221 Jy ! Component: 1350 - total flux cleaned = -0.001247 Jy ! Component: 1400 - total flux cleaned = -0.00130804 Jy ! Component: 1450 - total flux cleaned = -0.00132013 Jy ! Component: 1500 - total flux cleaned = -0.00135579 Jy ! Component: 1550 - total flux cleaned = -0.00139088 Jy ! Component: 1600 - total flux cleaned = -0.00141384 Jy ! Component: 1650 - total flux cleaned = -0.00147075 Jy ! Component: 1700 - total flux cleaned = -0.00151588 Jy ! Component: 1750 - total flux cleaned = -0.00157136 Jy ! Component: 1800 - total flux cleaned = -0.00161523 Jy ! Component: 1850 - total flux cleaned = -0.00165862 Jy ! Component: 1900 - total flux cleaned = -0.00173379 Jy ! Component: 1950 - total flux cleaned = -0.00179734 Jy ! Component: 2000 - total flux cleaned = -0.00180786 Jy ! Component: 2050 - total flux cleaned = -0.00183894 Jy ! Component: 2100 - total flux cleaned = -0.00192153 Jy ! Component: 2150 - total flux cleaned = -0.00191133 Jy ! Component: 2200 - total flux cleaned = -0.00195179 Jy ! Component: 2250 - total flux cleaned = -0.00201184 Jy ! Component: 2300 - total flux cleaned = -0.00204148 Jy ! Component: 2350 - total flux cleaned = -0.00208073 Jy ! Component: 2400 - total flux cleaned = -0.00210996 Jy ! Component: 2450 - total flux cleaned = -0.00216781 Jy ! Component: 2500 - total flux cleaned = -0.00221544 Jy ! Component: 2550 - total flux cleaned = -0.00226275 Jy ! Component: 2600 - total flux cleaned = -0.002319 Jy ! Component: 2650 - total flux cleaned = -0.00231904 Jy ! Component: 2700 - total flux cleaned = -0.00237445 Jy ! Component: 2750 - total flux cleaned = -0.00242942 Jy ! Component: 2800 - total flux cleaned = -0.00246576 Jy ! Component: 2850 - total flux cleaned = -0.00252872 Jy ! Component: 2900 - total flux cleaned = -0.00254638 Jy ! Component: 2950 - total flux cleaned = -0.00260838 Jy ! Component: 3000 - total flux cleaned = -0.00266985 Jy ! Component: 3050 - total flux cleaned = -0.00268726 Jy ! Component: 3100 - total flux cleaned = -0.00269591 Jy ! Component: 3150 - total flux cleaned = -0.00277301 Jy ! Component: 3200 - total flux cleaned = -0.00276438 Jy ! Component: 3250 - total flux cleaned = -0.00277288 Jy ! Component: 3300 - total flux cleaned = -0.00278127 Jy ! Component: 3350 - total flux cleaned = -0.00280624 Jy ! Component: 3400 - total flux cleaned = -0.00281447 Jy ! Component: 3450 - total flux cleaned = -0.00283097 Jy ! Component: 3500 - total flux cleaned = -0.00287177 Jy ! Component: 3550 - total flux cleaned = -0.00285548 Jy ! Component: 3600 - total flux cleaned = -0.00287161 Jy ! Component: 3650 - total flux cleaned = -0.00286359 Jy ! Component: 3700 - total flux cleaned = -0.00283984 Jy ! Component: 3750 - total flux cleaned = -0.00286362 Jy ! Component: 3800 - total flux cleaned = -0.00287938 Jy ! Component: 3850 - total flux cleaned = -0.00287147 Jy ! Component: 3900 - total flux cleaned = -0.00284031 Jy ! Component: 3950 - total flux cleaned = -0.00287908 Jy ! Component: 4000 - total flux cleaned = -0.00285589 Jy ! Component: 4050 - total flux cleaned = -0.0028329 Jy ! Total flux subtracted in 4096 components = -0.00283294 Jy ! Clean residual min=-0.000441 max=0.000450 Jy/beam ! Clean residual mean=0.000001 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0631182 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 336 components and 0.0631182 Jy ![Exited script file: muppet] wmap "J0819+3226_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.828 x 6.647 at -15.85 degrees (North through East) ! Clean map min=-0.0010638 max=0.058894 Jy/beam ! Writing clean map to FITS file: J0819+3226_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0588936 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132275 device "J0819+3226_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0819+3226_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.673802 0.673802 1.3476 2.69521 5.39042 10.7808 21.5617 43.1234 86.2467 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.828 x 6.647 at -15.85 degrees (North through East) ! Clean map min=-0.0010638 max=0.058894 Jy/beam quit ! Quitting program ! Log file J0819+3226_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:48:50 2016