! Started logfile: J0807-1207_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:47:57 2016 obs J0807-1207_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0807-1207_S_2014_06_09_pus_uva.fits ! AN table 1: 92 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.7 visibilities/baseline/integration-bin. ! Found source: J0807-1207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0807-1207_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914365Jy sigma=0.009514 ! Fit after self-cal, rms=0.887870Jy sigma=0.009225 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=7.556 mas, bpa=-0.08141 degrees ! Estimated noise=911.406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855284 Jy ! Component: 100 - total flux cleaned = 0.10648 Jy ! Total flux subtracted in 100 components = 0.10648 Jy ! Clean residual min=-0.007536 max=0.012137 Jy/beam ! Clean residual mean=-0.000037 rms=0.002058 Jy/beam ! Combined flux in latest and established models = 0.10648 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.10648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088434Jy sigma=0.000874 ! Fit after self-cal, rms=0.088440Jy sigma=0.000873 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=9.182 mas, bpa=-0.4257 degrees ! Estimated noise=641.087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200873 Jy ! Component: 100 - total flux cleaned = 0.0330441 Jy ! Component: 150 - total flux cleaned = 0.0423072 Jy ! Component: 200 - total flux cleaned = 0.0491564 Jy ! Total flux subtracted in 200 components = 0.0491564 Jy ! Clean residual min=-0.005627 max=0.006991 Jy/beam ! Clean residual mean=-0.000030 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.155636 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 77 components and 0.155636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082996Jy sigma=0.000812 ! Fit after self-cal, rms=0.082458Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 0.98 KP 1.03 ! LA 1.13 MK 1.05 NL 1.02 OV 1.01 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.05 KP 0.97 ! LA 1.08 MK 1.05 NL 1.08 OV 1.03 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.09 KP 0.89 ! LA 0.82 MK 1.09 NL 1.03 OV 0.93 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.02 KP 0.88 ! LA 0.81 MK 0.99 NL 1.10 OV 1.00 ! PT 0.94 SC 0.95 ! ! ! Fit before self-cal, rms=0.082458Jy sigma=0.000807 ! Fit after self-cal, rms=0.077916Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=9.319 mas, bpa=0.005766 degrees ! Estimated noise=620.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665874 Jy ! Component: 100 - total flux cleaned = 0.0100144 Jy ! Component: 150 - total flux cleaned = 0.0117102 Jy ! Component: 200 - total flux cleaned = 0.0124767 Jy ! Total flux subtracted in 200 components = 0.0124767 Jy ! Clean residual min=-0.003083 max=0.003854 Jy/beam ! Clean residual mean=-0.000017 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.168113 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 125 components and 0.168113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077415Jy sigma=0.000783 ! Fit after self-cal, rms=0.077361Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077361Jy sigma=0.000782 ! Fit after self-cal, rms=0.077143Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=9.313 mas, bpa=0.04979 degrees ! Estimated noise=620.231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255583 Jy ! Component: 100 - total flux cleaned = 0.00365479 Jy ! Component: 150 - total flux cleaned = 0.00413763 Jy ! Component: 200 - total flux cleaned = 0.00428972 Jy ! Total flux subtracted in 200 components = 0.00428972 Jy ! Clean residual min=-0.002491 max=0.003411 Jy/beam ! Clean residual mean=-0.000011 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.172402 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 155 components and 0.172403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077056Jy sigma=0.000779 ! Fit after self-cal, rms=0.077034Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316451 Jy ! Component: 100 - total flux cleaned = 0.00464636 Jy ! Component: 150 - total flux cleaned = 0.00508849 Jy ! Component: 200 - total flux cleaned = 0.00527305 Jy ! Total flux subtracted in 200 components = 0.00527305 Jy ! Clean residual min=-0.002436 max=0.002480 Jy/beam ! Clean residual mean=-0.000009 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.177676 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 195 components and 0.177676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076904Jy sigma=0.000777 ! Fit after self-cal, rms=0.076887Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076887Jy sigma=0.000777 ! Fit after self-cal, rms=0.076382Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=9.306 mas, bpa=0.08678 degrees ! Estimated noise=618.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138059 Jy ! Component: 100 - total flux cleaned = 0.00229111 Jy ! Component: 150 - total flux cleaned = 0.0026547 Jy ! Component: 200 - total flux cleaned = 0.00289209 Jy ! Total flux subtracted in 200 components = 0.00289209 Jy ! Clean residual min=-0.002346 max=0.002280 Jy/beam ! Clean residual mean=-0.000007 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.180568 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 221 components and 0.180568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076348Jy sigma=0.000777 ! Fit after self-cal, rms=0.076337Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621184 Jy ! Component: 100 - total flux cleaned = 0.00080737 Jy ! Component: 150 - total flux cleaned = 0.000890707 Jy ! Component: 200 - total flux cleaned = 0.00094843 Jy ! Total flux subtracted in 200 components = 0.00094843 Jy ! Clean residual min=-0.002318 max=0.002312 Jy/beam ! Clean residual mean=-0.000006 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.181516 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 234 components and 0.181516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076325Jy sigma=0.000776 ! Fit after self-cal, rms=0.076325Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076325Jy sigma=0.000776 ! Fit after self-cal, rms=0.076166Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=17.86 mas, bpa=-3.966 degrees ! Estimated noise=748.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010801 Jy ! Component: 100 - total flux cleaned = 0.00124406 Jy ! Component: 150 - total flux cleaned = 0.00128838 Jy ! Component: 200 - total flux cleaned = 0.00130905 Jy ! Total flux subtracted in 200 components = 0.00130905 Jy ! Clean residual min=-0.002573 max=0.002982 Jy/beam ! Clean residual mean=-0.000011 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.182825 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 255 components and 0.182825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076161Jy sigma=0.000776 ! Fit after self-cal, rms=0.076155Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182941 Jy ! Component: 100 - total flux cleaned = 0.000221684 Jy ! Component: 150 - total flux cleaned = 0.000240283 Jy ! Component: 200 - total flux cleaned = 0.000275935 Jy ! Total flux subtracted in 200 components = 0.000275935 Jy ! Clean residual min=-0.002494 max=0.002918 Jy/beam ! Clean residual mean=-0.000011 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.183101 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 264 components and 0.183101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076152Jy sigma=0.000776 ! Fit after self-cal, rms=0.076151Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=9.302 mas, bpa=0.0841 degrees ! Estimated noise=617.649 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 9.302 at 0.0841 degrees (North through East) ! Clean map min=-0.0021581 max=0.11098 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=7.617 mas, bpa=0.413 degrees ! Estimated noise=886.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0828734 Jy ! Component: 100 - total flux cleaned = 0.104024 Jy ! Component: 150 - total flux cleaned = 0.117349 Jy ! Component: 200 - total flux cleaned = 0.127113 Jy ! Total flux subtracted in 200 components = 0.127113 Jy ! Clean residual min=-0.004372 max=0.005598 Jy/beam ! Clean residual mean=-0.000022 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.127113 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.127113 Jy ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=9.302 mas, bpa=0.0841 degrees ! Estimated noise=617.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130067 Jy ! Component: 100 - total flux cleaned = 0.0218978 Jy ! Component: 150 - total flux cleaned = 0.0284692 Jy ! Component: 200 - total flux cleaned = 0.0335369 Jy ! Total flux subtracted in 200 components = 0.0335369 Jy ! Clean residual min=-0.003361 max=0.003484 Jy/beam ! Clean residual mean=-0.000019 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.16065 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 98 components and 0.16065 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=17.86 mas, bpa=-3.966 degrees ! Estimated noise=748.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669179 Jy ! Component: 100 - total flux cleaned = 0.0110024 Jy ! Component: 150 - total flux cleaned = 0.0140035 Jy ! Component: 200 - total flux cleaned = 0.0162075 Jy ! Total flux subtracted in 200 components = 0.0162075 Jy ! Clean residual min=-0.003098 max=0.003014 Jy/beam ! Clean residual mean=-0.000020 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.176857 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164327 Jy ! Component: 100 - total flux cleaned = 0.00288346 Jy ! Component: 150 - total flux cleaned = 0.00340633 Jy ! Component: 200 - total flux cleaned = 0.00382679 Jy ! Total flux subtracted in 200 components = 0.00382679 Jy ! Clean residual min=-0.002862 max=0.002872 Jy/beam ! Clean residual mean=-0.000016 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.180684 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 208 components and 0.180684 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=9.302 mas, bpa=0.0841 degrees ! Estimated noise=617.649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777754 Jy ! Component: 100 - total flux cleaned = 0.000930473 Jy ! Component: 150 - total flux cleaned = 0.00113313 Jy ! Component: 200 - total flux cleaned = 0.00137983 Jy ! Total flux subtracted in 200 components = 0.00137983 Jy ! Clean residual min=-0.002235 max=0.002160 Jy/beam ! Clean residual mean=-0.000007 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.182064 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 233 components and 0.182064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076190Jy sigma=0.000777 ! Fit after self-cal, rms=0.076188Jy sigma=0.000777 wmodel J0807-1207_S_2014_06_09_pus_map.mod ! Writing 233 model components to file: J0807-1207_S_2014_06_09_pus_map.mod wobs J0807-1207_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0807-1207_S_2014_06_09_pus_uvs.fits wwins J0807-1207_S_2014_06_09_pus_map.win ! wwins: Wrote 4 windows to J0807-1207_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166295 Jy ! Component: 100 - total flux cleaned = -5.75169e-05 Jy ! Component: 150 - total flux cleaned = -2.57562e-05 Jy ! Component: 200 - total flux cleaned = -0.000182095 Jy ! Component: 250 - total flux cleaned = -0.000389586 Jy ! Component: 300 - total flux cleaned = -0.000531381 Jy ! Component: 350 - total flux cleaned = -0.000614554 Jy ! Component: 400 - total flux cleaned = -0.000722571 Jy ! Component: 450 - total flux cleaned = -0.000825389 Jy ! Component: 500 - total flux cleaned = -0.000900522 Jy ! Component: 550 - total flux cleaned = -0.00102242 Jy ! Component: 600 - total flux cleaned = -0.00104679 Jy ! Component: 650 - total flux cleaned = -0.0011403 Jy ! Component: 700 - total flux cleaned = -0.00118578 Jy ! Component: 750 - total flux cleaned = -0.00120783 Jy ! Component: 800 - total flux cleaned = -0.00125093 Jy ! Component: 850 - total flux cleaned = -0.0012933 Jy ! Component: 900 - total flux cleaned = -0.00137646 Jy ! Component: 950 - total flux cleaned = -0.00145798 Jy ! Component: 1000 - total flux cleaned = -0.00151791 Jy ! Component: 1050 - total flux cleaned = -0.00157708 Jy ! Component: 1100 - total flux cleaned = -0.00163427 Jy ! Component: 1150 - total flux cleaned = -0.00163362 Jy ! Component: 1200 - total flux cleaned = -0.00159658 Jy ! Component: 1250 - total flux cleaned = -0.00161506 Jy ! Component: 1300 - total flux cleaned = -0.00166937 Jy ! Component: 1350 - total flux cleaned = -0.00168686 Jy ! Component: 1400 - total flux cleaned = -0.0017215 Jy ! Component: 1450 - total flux cleaned = -0.00173864 Jy ! Component: 1500 - total flux cleaned = -0.00175546 Jy ! Component: 1550 - total flux cleaned = -0.00175543 Jy ! Component: 1600 - total flux cleaned = -0.00170632 Jy ! Component: 1650 - total flux cleaned = -0.00172257 Jy ! Component: 1700 - total flux cleaned = -0.00175455 Jy ! Component: 1750 - total flux cleaned = -0.0017389 Jy ! Component: 1800 - total flux cleaned = -0.00180125 Jy ! Component: 1850 - total flux cleaned = -0.00175501 Jy ! Component: 1900 - total flux cleaned = -0.00180082 Jy ! Component: 1950 - total flux cleaned = -0.00184615 Jy ! Component: 2000 - total flux cleaned = -0.00192065 Jy ! Component: 2050 - total flux cleaned = -0.00194978 Jy ! Component: 2100 - total flux cleaned = -0.00202278 Jy ! Component: 2150 - total flux cleaned = -0.00203722 Jy ! Component: 2200 - total flux cleaned = -0.00205164 Jy ! Component: 2250 - total flux cleaned = -0.00215044 Jy ! Component: 2300 - total flux cleaned = -0.00215052 Jy ! Component: 2350 - total flux cleaned = -0.00219193 Jy ! Component: 2400 - total flux cleaned = -0.00221954 Jy ! Component: 2450 - total flux cleaned = -0.00227362 Jy ! Component: 2500 - total flux cleaned = -0.00230027 Jy ! Component: 2550 - total flux cleaned = -0.00232673 Jy ! Component: 2600 - total flux cleaned = -0.00236644 Jy ! Component: 2650 - total flux cleaned = -0.00240563 Jy ! Component: 2700 - total flux cleaned = -0.00245745 Jy ! Component: 2750 - total flux cleaned = -0.00253452 Jy ! Component: 2800 - total flux cleaned = -0.00258536 Jy ! Component: 2850 - total flux cleaned = -0.00262313 Jy ! Component: 2900 - total flux cleaned = -0.00267305 Jy ! Component: 2950 - total flux cleaned = -0.00268538 Jy ! Component: 3000 - total flux cleaned = -0.00274713 Jy ! Component: 3050 - total flux cleaned = -0.00280823 Jy ! Component: 3100 - total flux cleaned = -0.0028687 Jy ! Component: 3150 - total flux cleaned = -0.00290484 Jy ! Component: 3200 - total flux cleaned = -0.00294045 Jy ! Component: 3250 - total flux cleaned = -0.00297598 Jy ! Component: 3300 - total flux cleaned = -0.00305809 Jy ! Component: 3350 - total flux cleaned = -0.00309287 Jy ! Component: 3400 - total flux cleaned = -0.00313892 Jy ! Component: 3450 - total flux cleaned = -0.00318461 Jy ! Component: 3500 - total flux cleaned = -0.00321871 Jy ! Component: 3550 - total flux cleaned = -0.00323004 Jy ! Component: 3600 - total flux cleaned = -0.00325242 Jy ! Component: 3650 - total flux cleaned = -0.00326355 Jy ! Component: 3700 - total flux cleaned = -0.00326346 Jy ! Component: 3750 - total flux cleaned = -0.00330733 Jy ! Component: 3800 - total flux cleaned = -0.00329653 Jy ! Component: 3850 - total flux cleaned = -0.00335044 Jy ! Component: 3900 - total flux cleaned = -0.00336124 Jy ! Component: 3950 - total flux cleaned = -0.00338252 Jy ! Component: 4000 - total flux cleaned = -0.00340365 Jy ! Component: 4050 - total flux cleaned = -0.00340361 Jy ! Total flux subtracted in 4096 components = -0.00341408 Jy ! Clean residual min=-0.000703 max=0.000694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.17865 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 524 components and 0.17865 Jy ![Exited script file: muppet] wmap "J0807-1207_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 9.302 at 0.0841 degrees (North through East) ! Clean map min=-0.0016159 max=0.1102 Jy/beam ! Writing clean map to FITS file: J0807-1207_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019192 device "J0807-1207_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0807-1207_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.522486 0.522486 1.04497 2.08994 4.17989 8.35978 16.7196 33.4391 66.8782 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 9.302 at 0.0841 degrees (North through East) ! Clean map min=-0.0016159 max=0.1102 Jy/beam quit ! Quitting program ! Log file J0807-1207_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:48:02 2016