! Started logfile: J0659+0813_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:46:00 2016 obs J0659+0813_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0659+0813_S_2014_06_09_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.592593 visibilities/baseline/integration-bin. ! Found source: J0659+0813 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 1600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0659+0813_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.475201Jy sigma=0.004120 ! Fit after self-cal, rms=0.432723Jy sigma=0.003759 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.31 mas, bmaj=8.08 mas, bpa=31.54 degrees ! Estimated noise=2459.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.448728 Jy ! Component: 100 - total flux cleaned = 0.580148 Jy ! Total flux subtracted in 100 components = 0.580148 Jy ! Clean residual min=-0.033554 max=0.055976 Jy/beam ! Clean residual mean=-0.000332 rms=0.012161 Jy/beam ! Combined flux in latest and established models = 0.580148 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.580148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169442Jy sigma=0.001379 ! Fit after self-cal, rms=0.169295Jy sigma=0.001377 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.165 mas, bmaj=8.804 mas, bpa=30.19 degrees ! Estimated noise=2061.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708642 Jy ! Component: 100 - total flux cleaned = 0.105525 Jy ! Component: 150 - total flux cleaned = 0.124673 Jy ! Component: 200 - total flux cleaned = 0.135422 Jy ! Total flux subtracted in 200 components = 0.135422 Jy ! Clean residual min=-0.021896 max=0.027725 Jy/beam ! Clean residual mean=-0.000018 rms=0.006761 Jy/beam ! Combined flux in latest and established models = 0.71557 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.71557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135708Jy sigma=0.001131 ! Fit after self-cal, rms=0.135541Jy sigma=0.001129 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.01 KP 0.99 ! LA 1.24 MK 1.00* NL 0.96 OV 1.01 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.03 KP 0.96 ! LA 1.19 MK 1.00* NL 1.05 OV 1.03 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.04 KP 0.87 ! LA 0.94 MK 1.00* NL 0.99 OV 0.97 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 0.84 ! LA 0.90 MK 1.00* NL 1.07 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.135541Jy sigma=0.001129 ! Fit after self-cal, rms=0.112326Jy sigma=0.000943 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.148 mas, bmaj=8.828 mas, bpa=30.36 degrees ! Estimated noise=2041.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.5, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232775 Jy ! Component: 100 - total flux cleaned = 0.0244241 Jy ! Component: 150 - total flux cleaned = 0.0224803 Jy ! Component: 200 - total flux cleaned = 0.0208289 Jy ! Total flux subtracted in 200 components = 0.0208289 Jy ! Clean residual min=-0.011468 max=0.012176 Jy/beam ! Clean residual mean=-0.000004 rms=0.002858 Jy/beam ! Combined flux in latest and established models = 0.736399 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.736399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107373Jy sigma=0.000904 ! Fit after self-cal, rms=0.107046Jy sigma=0.000901 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107046Jy sigma=0.000901 ! Fit after self-cal, rms=0.106340Jy sigma=0.000899 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.13 mas, bmaj=8.827 mas, bpa=30.87 degrees ! Estimated noise=2029.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240382 Jy ! Component: 100 - total flux cleaned = 0.00159896 Jy ! Component: 150 - total flux cleaned = 0.000573054 Jy ! Component: 200 - total flux cleaned = -0.000325411 Jy ! Total flux subtracted in 200 components = -0.000325411 Jy ! Clean residual min=-0.009287 max=0.008787 Jy/beam ! Clean residual mean=0.000003 rms=0.002243 Jy/beam ! Combined flux in latest and established models = 0.736073 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.736073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105547Jy sigma=0.000893 ! Fit after self-cal, rms=0.105439Jy sigma=0.000892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167691 Jy ! Component: 100 - total flux cleaned = 0.00139232 Jy ! Component: 150 - total flux cleaned = 0.00102021 Jy ! Component: 200 - total flux cleaned = 0.000582209 Jy ! Total flux subtracted in 200 components = 0.000582209 Jy ! Clean residual min=-0.007713 max=0.007569 Jy/beam ! Clean residual mean=-0.000001 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.736656 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.736656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105107Jy sigma=0.000889 ! Fit after self-cal, rms=0.105059Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105059Jy sigma=0.000889 ! Fit after self-cal, rms=0.104900Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.126 mas, bmaj=8.834 mas, bpa=31.06 degrees ! Estimated noise=2028.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836797 Jy ! Component: 100 - total flux cleaned = 0.000859685 Jy ! Component: 150 - total flux cleaned = 0.000564271 Jy ! Component: 200 - total flux cleaned = 0.000198925 Jy ! Total flux subtracted in 200 components = 0.000198925 Jy ! Clean residual min=-0.006646 max=0.006729 Jy/beam ! Clean residual mean=0.000001 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.736854 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.736855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104686Jy sigma=0.000887 ! Fit after self-cal, rms=0.104655Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748845 Jy ! Component: 100 - total flux cleaned = 0.000660935 Jy ! Component: 150 - total flux cleaned = 0.000334928 Jy ! Component: 200 - total flux cleaned = 3.17761e-05 Jy ! Total flux subtracted in 200 components = 3.17761e-05 Jy ! Clean residual min=-0.005875 max=0.006268 Jy/beam ! Clean residual mean=0.000000 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.736886 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.736886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104519Jy sigma=0.000885 ! Fit after self-cal, rms=0.104502Jy sigma=0.000885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104502Jy sigma=0.000885 ! Fit after self-cal, rms=0.104439Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.66 mas, bmaj=11.68 mas, bpa=3.071 degrees ! Estimated noise=2262.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020454 Jy ! Component: 100 - total flux cleaned = -0.000379907 Jy ! Component: 150 - total flux cleaned = -0.000745421 Jy ! Component: 200 - total flux cleaned = -0.0010799 Jy ! Total flux subtracted in 200 components = -0.0010799 Jy ! Clean residual min=-0.005608 max=0.005888 Jy/beam ! Clean residual mean=0.000005 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.735806 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 0.735807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104359Jy sigma=0.000884 ! Fit after self-cal, rms=0.104339Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060956 Jy ! Component: 100 - total flux cleaned = 0.0003385 Jy ! Component: 150 - total flux cleaned = 0.000161954 Jy ! Component: 200 - total flux cleaned = -5.52313e-06 Jy ! Total flux subtracted in 200 components = -5.52313e-06 Jy ! Clean residual min=-0.005512 max=0.005481 Jy/beam ! Clean residual mean=0.000004 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.735801 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 142 components and 0.735801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104284Jy sigma=0.000884 ! Fit after self-cal, rms=0.104274Jy sigma=0.000884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.124 mas, bmaj=8.836 mas, bpa=31.14 degrees ! Estimated noise=2027.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.124 x 8.836 at 31.14 degrees (North through East) ! Clean map min=-0.0063318 max=0.57964 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104274Jy sigma=0.000884 ! Fit after self-cal, rms=0.083682Jy sigma=0.000698 ! Inverting map and beam ! Estimated beam: bmin=6.128 mas, bmaj=8.84 mas, bpa=31.04 degrees ! Estimated noise=2029.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208024 Jy ! Component: 100 - total flux cleaned = 0.000137397 Jy ! Component: 150 - total flux cleaned = 7.02472e-05 Jy ! Component: 200 - total flux cleaned = -5.25228e-05 Jy ! Total flux subtracted in 200 components = -5.25228e-05 Jy ! Clean residual min=-0.005081 max=0.004845 Jy/beam ! Clean residual mean=0.000002 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.735749 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.735749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083571Jy sigma=0.000697 ! Fit after self-cal, rms=0.083568Jy sigma=0.000697 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023038 Jy ! Component: 100 - total flux cleaned = 0.000176719 Jy ! Component: 150 - total flux cleaned = 7.39972e-05 Jy ! Component: 200 - total flux cleaned = -6.86707e-05 Jy ! Total flux subtracted in 200 components = -6.86707e-05 Jy ! Clean residual min=-0.004881 max=0.004625 Jy/beam ! Clean residual mean=0.000001 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.73568 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 161 components and 0.73568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083504Jy sigma=0.000696 ! Fit after self-cal, rms=0.083500Jy sigma=0.000696 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083500Jy sigma=0.000696 ! Fit after self-cal, rms=0.083426Jy sigma=0.000696 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.278 mas, bmaj=8.104 mas, bpa=32.14 degrees ! Estimated noise=2413.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.440785 Jy ! Component: 100 - total flux cleaned = 0.572186 Jy ! Component: 150 - total flux cleaned = 0.629449 Jy ! Component: 200 - total flux cleaned = 0.665349 Jy ! Total flux subtracted in 200 components = 0.665349 Jy ! Clean residual min=-0.015090 max=0.030358 Jy/beam ! Clean residual mean=-0.000112 rms=0.005389 Jy/beam ! Combined flux in latest and established models = 0.665349 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.665349 Jy ! Inverting map and beam ! Estimated beam: bmin=6.125 mas, bmaj=8.84 mas, bpa=31.15 degrees ! Estimated noise=2028.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351795 Jy ! Component: 100 - total flux cleaned = 0.0540467 Jy ! Component: 150 - total flux cleaned = 0.0658794 Jy ! Component: 200 - total flux cleaned = 0.0730009 Jy ! Total flux subtracted in 200 components = 0.0730009 Jy ! Clean residual min=-0.007584 max=0.006700 Jy/beam ! Clean residual mean=-0.000029 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.73835 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 91 components and 0.73835 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.661 mas, bmaj=11.68 mas, bpa=3.077 degrees ! Estimated noise=2262.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231732 Jy ! Component: 100 - total flux cleaned = 0.00173708 Jy ! Component: 150 - total flux cleaned = 0.000931557 Jy ! Component: 200 - total flux cleaned = 0.000408388 Jy ! Total flux subtracted in 200 components = 0.000408388 Jy ! Clean residual min=-0.006922 max=0.005650 Jy/beam ! Clean residual mean=-0.000023 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.738758 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554248 Jy ! Component: 100 - total flux cleaned = -0.000747866 Jy ! Component: 150 - total flux cleaned = -0.00101065 Jy ! Component: 200 - total flux cleaned = -0.00124281 Jy ! Total flux subtracted in 200 components = -0.00124281 Jy ! Clean residual min=-0.006328 max=0.005346 Jy/beam ! Clean residual mean=-0.000019 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.737515 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 154 components and 0.737515 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.125 mas, bmaj=8.84 mas, bpa=31.15 degrees ! Estimated noise=2028.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000912946 Jy ! Component: 100 - total flux cleaned = -0.00116858 Jy ! Component: 150 - total flux cleaned = -0.00140899 Jy ! Component: 200 - total flux cleaned = -0.00163626 Jy ! Total flux subtracted in 200 components = -0.00163626 Jy ! Clean residual min=-0.005993 max=0.004820 Jy/beam ! Clean residual mean=-0.000012 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.735879 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 176 components and 0.735879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083540Jy sigma=0.000697 ! Fit after self-cal, rms=0.083529Jy sigma=0.000697 wmodel J0659+0813_S_2014_06_09_pus_map.mod ! Writing 176 model components to file: J0659+0813_S_2014_06_09_pus_map.mod wobs J0659+0813_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0659+0813_S_2014_06_09_pus_uvs.fits wwins J0659+0813_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0659+0813_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00241253 Jy ! Component: 100 - total flux cleaned = -0.00283894 Jy ! Component: 150 - total flux cleaned = -0.00269093 Jy ! Component: 200 - total flux cleaned = -0.00268647 Jy ! Component: 250 - total flux cleaned = -0.0028738 Jy ! Component: 300 - total flux cleaned = -0.00311254 Jy ! Component: 350 - total flux cleaned = -0.00333794 Jy ! Component: 400 - total flux cleaned = -0.00365821 Jy ! Component: 450 - total flux cleaned = -0.00406362 Jy ! Component: 500 - total flux cleaned = -0.00430484 Jy ! Component: 550 - total flux cleaned = -0.00462867 Jy ! Component: 600 - total flux cleaned = -0.0049401 Jy ! Component: 650 - total flux cleaned = -0.00528196 Jy ! Component: 700 - total flux cleaned = -0.00557063 Jy ! Component: 750 - total flux cleaned = -0.00592774 Jy ! Component: 800 - total flux cleaned = -0.0061961 Jy ! Component: 850 - total flux cleaned = -0.00649358 Jy ! Component: 900 - total flux cleaned = -0.0068544 Jy ! Component: 950 - total flux cleaned = -0.00702899 Jy ! Component: 1000 - total flux cleaned = -0.00719988 Jy ! Component: 1050 - total flux cleaned = -0.00739906 Jy ! Component: 1100 - total flux cleaned = -0.00762509 Jy ! Component: 1150 - total flux cleaned = -0.00781385 Jy ! Component: 1200 - total flux cleaned = -0.00796725 Jy ! Component: 1250 - total flux cleaned = -0.00808735 Jy ! Component: 1300 - total flux cleaned = -0.00823395 Jy ! Component: 1350 - total flux cleaned = -0.00834898 Jy ! Component: 1400 - total flux cleaned = -0.00837794 Jy ! Component: 1450 - total flux cleaned = -0.00848792 Jy ! Component: 1500 - total flux cleaned = -0.00856731 Jy ! Component: 1550 - total flux cleaned = -0.00861969 Jy ! Component: 1600 - total flux cleaned = -0.00861933 Jy ! Component: 1650 - total flux cleaned = -0.00854305 Jy ! Component: 1700 - total flux cleaned = -0.00851834 Jy ! Component: 1750 - total flux cleaned = -0.00846975 Jy ! Component: 1800 - total flux cleaned = -0.00849401 Jy ! Component: 1850 - total flux cleaned = -0.00847025 Jy ! Component: 1900 - total flux cleaned = -0.00840021 Jy ! Component: 1950 - total flux cleaned = -0.00830792 Jy ! Component: 2000 - total flux cleaned = -0.00823992 Jy ! Component: 2050 - total flux cleaned = -0.00819496 Jy ! Component: 2100 - total flux cleaned = -0.00810608 Jy ! Component: 2150 - total flux cleaned = -0.00801799 Jy ! Component: 2200 - total flux cleaned = -0.00793087 Jy ! Component: 2250 - total flux cleaned = -0.00782316 Jy ! Component: 2300 - total flux cleaned = -0.00775923 Jy ! Component: 2350 - total flux cleaned = -0.00765344 Jy ! Component: 2400 - total flux cleaned = -0.00759077 Jy ! Component: 2450 - total flux cleaned = -0.00752845 Jy ! Component: 2500 - total flux cleaned = -0.00742544 Jy ! Component: 2550 - total flux cleaned = -0.00732344 Jy ! Component: 2600 - total flux cleaned = -0.00722224 Jy ! Component: 2650 - total flux cleaned = -0.0071221 Jy ! Component: 2700 - total flux cleaned = -0.00702273 Jy ! Component: 2750 - total flux cleaned = -0.00690429 Jy ! Component: 2800 - total flux cleaned = -0.00684566 Jy ! Component: 2850 - total flux cleaned = -0.00672899 Jy ! Component: 2900 - total flux cleaned = -0.0067097 Jy ! Component: 2950 - total flux cleaned = -0.00661356 Jy ! Component: 3000 - total flux cleaned = -0.00651778 Jy ! Component: 3050 - total flux cleaned = -0.00646056 Jy ! Component: 3100 - total flux cleaned = -0.00634672 Jy ! Component: 3150 - total flux cleaned = -0.00632755 Jy ! Component: 3200 - total flux cleaned = -0.00627092 Jy ! Component: 3250 - total flux cleaned = -0.00619588 Jy ! Component: 3300 - total flux cleaned = -0.00602752 Jy ! Component: 3350 - total flux cleaned = -0.00593426 Jy ! Component: 3400 - total flux cleaned = -0.00585982 Jy ! Component: 3450 - total flux cleaned = -0.00569252 Jy ! Component: 3500 - total flux cleaned = -0.00558122 Jy ! Component: 3550 - total flux cleaned = -0.00547002 Jy ! Component: 3600 - total flux cleaned = -0.00534064 Jy ! Component: 3650 - total flux cleaned = -0.00524824 Jy ! Component: 3700 - total flux cleaned = -0.00511901 Jy ! Component: 3750 - total flux cleaned = -0.00498991 Jy ! Component: 3800 - total flux cleaned = -0.00487937 Jy ! Component: 3850 - total flux cleaned = -0.00478717 Jy ! Component: 3900 - total flux cleaned = -0.0046948 Jy ! Component: 3950 - total flux cleaned = -0.00454688 Jy ! Component: 4000 - total flux cleaned = -0.00447294 Jy ! Component: 4050 - total flux cleaned = -0.00430612 Jy ! Total flux subtracted in 4096 components = -0.00426908 Jy ! Clean residual min=-0.001206 max=0.001187 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.73161 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 432 components and 0.73161 Jy ![Exited script file: muppet] wmap "J0659+0813_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.125 x 8.84 at 31.15 degrees (North through East) ! Clean map min=-0.0050023 max=0.57807 Jy/beam ! Writing clean map to FITS file: J0659+0813_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.578066 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000327037 device "J0659+0813_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0659+0813_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.169723 0.169723 0.339446 0.678892 1.35778 2.71557 5.43114 10.8623 21.7245 43.4491 86.8982 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.578 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.125 x 8.84 at 31.15 degrees (North through East) ! Clean map min=-0.0050023 max=0.57807 Jy/beam quit ! Quitting program ! Log file J0659+0813_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:46:04 2016