! Started logfile: J0605-3522_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:45:41 2016 obs J0605-3522_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0605-3522_S_2014_06_09_pus_uva.fits ! AN table 1: 91 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.536508 visibilities/baseline/integration-bin. ! Found source: J0605-3522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0605-3522_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930754Jy sigma=0.007131 ! Fit after self-cal, rms=0.891063Jy sigma=0.006856 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=16.72 mas, bpa=17.11 degrees ! Estimated noise=1684.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862356 Jy ! Component: 100 - total flux cleaned = 0.107332 Jy ! Total flux subtracted in 100 components = 0.107332 Jy ! Clean residual min=-0.006187 max=0.009270 Jy/beam ! Clean residual mean=-0.000029 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.107332 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.107332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117255Jy sigma=0.000791 ! Fit after self-cal, rms=0.117177Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=18.76 mas, bpa=15.16 degrees ! Estimated noise=1002.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170008 Jy ! Component: 100 - total flux cleaned = 0.0251777 Jy ! Component: 150 - total flux cleaned = 0.0299567 Jy ! Component: 200 - total flux cleaned = 0.0328308 Jy ! Total flux subtracted in 200 components = 0.0328308 Jy ! Clean residual min=-0.003389 max=0.004737 Jy/beam ! Clean residual mean=0.000033 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.140163 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 75 components and 0.140163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114983Jy sigma=0.000770 ! Fit after self-cal, rms=0.114981Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.81 HN 1.13 KP 1.08 ! LA 1.16 MK 1.00* NL 1.02 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.19 KP 1.00 ! LA 1.15 MK 1.00* NL 1.07 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.21 KP 0.90 ! LA 0.92 MK 1.00* NL 1.00 OV 0.88 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.09 KP 0.89 ! LA 0.86 MK 1.00* NL 1.06 OV 0.97 ! PT 1.01 SC 1.06 ! ! ! Fit before self-cal, rms=0.114981Jy sigma=0.000769 ! Fit after self-cal, rms=0.118939Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=18.99 mas, bpa=15.15 degrees ! Estimated noise=998.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107753 Jy ! Component: 100 - total flux cleaned = -0.00115379 Jy ! Component: 150 - total flux cleaned = -0.00122082 Jy ! Component: 200 - total flux cleaned = -0.00130872 Jy ! Total flux subtracted in 200 components = -0.00130872 Jy ! Clean residual min=-0.003091 max=0.004081 Jy/beam ! Clean residual mean=0.000010 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.138854 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.138854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118905Jy sigma=0.000760 ! Fit after self-cal, rms=0.119091Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119091Jy sigma=0.000760 ! Fit after self-cal, rms=0.120660Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.951 mas, bmaj=19.03 mas, bpa=15.11 degrees ! Estimated noise=997.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701621 Jy ! Component: 100 - total flux cleaned = -0.00074964 Jy ! Component: 150 - total flux cleaned = -0.000793642 Jy ! Component: 200 - total flux cleaned = -0.000833951 Jy ! Total flux subtracted in 200 components = -0.000833951 Jy ! Clean residual min=-0.002831 max=0.003358 Jy/beam ! Clean residual mean=0.000010 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.13802 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.13802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120649Jy sigma=0.000759 ! Fit after self-cal, rms=0.120740Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33, 63.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207103 Jy ! Component: 100 - total flux cleaned = 0.00199699 Jy ! Component: 150 - total flux cleaned = 0.00199417 Jy ! Component: 200 - total flux cleaned = 0.00204745 Jy ! Total flux subtracted in 200 components = 0.00204745 Jy ! Clean residual min=-0.003174 max=0.002432 Jy/beam ! Clean residual mean=0.000003 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.140067 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.140067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120619Jy sigma=0.000758 ! Fit after self-cal, rms=0.120620Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120620Jy sigma=0.000758 ! Fit after self-cal, rms=0.121465Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=19.02 mas, bpa=15.04 degrees ! Estimated noise=997.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101229 Jy ! Component: 100 - total flux cleaned = 0.00106784 Jy ! Component: 150 - total flux cleaned = 0.00111809 Jy ! Component: 200 - total flux cleaned = 0.00111896 Jy ! Total flux subtracted in 200 components = 0.00111896 Jy ! Clean residual min=-0.003063 max=0.002674 Jy/beam ! Clean residual mean=0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.141186 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 0.141186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121400Jy sigma=0.000758 ! Fit after self-cal, rms=0.121450Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250458 Jy ! Component: 100 - total flux cleaned = 0.000348276 Jy ! Component: 150 - total flux cleaned = 0.000349278 Jy ! Component: 200 - total flux cleaned = 0.000308316 Jy ! Total flux subtracted in 200 components = 0.000308316 Jy ! Clean residual min=-0.002937 max=0.002691 Jy/beam ! Clean residual mean=0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.141495 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 152 components and 0.141495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121403Jy sigma=0.000757 ! Fit after self-cal, rms=0.121396Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121396Jy sigma=0.000757 ! Fit after self-cal, rms=0.120720Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.723 mas, bmaj=29.85 mas, bpa=2.39 degrees ! Estimated noise=1092.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498634 Jy ! Component: 100 - total flux cleaned = 0.000498323 Jy ! Component: 150 - total flux cleaned = 0.000525858 Jy ! Component: 200 - total flux cleaned = 0.00052639 Jy ! Total flux subtracted in 200 components = 0.00052639 Jy ! Clean residual min=-0.002511 max=0.002662 Jy/beam ! Clean residual mean=0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.142021 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 166 components and 0.142021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120696Jy sigma=0.000757 ! Fit after self-cal, rms=0.120682Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-114, 95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356603 Jy ! Component: 100 - total flux cleaned = 0.00047503 Jy ! Component: 150 - total flux cleaned = 0.000718843 Jy ! Component: 200 - total flux cleaned = 0.000801895 Jy ! Total flux subtracted in 200 components = 0.000801895 Jy ! Clean residual min=-0.001453 max=0.001445 Jy/beam ! Clean residual mean=-0.000012 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.142823 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 193 components and 0.142823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120604Jy sigma=0.000757 ! Fit after self-cal, rms=0.120593Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.99 mas, bpa=15 degrees ! Estimated noise=995.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 18.99 at 15 degrees (North through East) ! Clean map min=-0.0037643 max=0.10597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=16.86 mas, bpa=17.08 degrees ! Estimated noise=1699.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.086343 Jy ! Component: 100 - total flux cleaned = 0.107895 Jy ! Component: 150 - total flux cleaned = 0.118781 Jy ! Component: 200 - total flux cleaned = 0.124715 Jy ! Total flux subtracted in 200 components = 0.124715 Jy ! Clean residual min=-0.004898 max=0.004929 Jy/beam ! Clean residual mean=-0.000016 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.124715 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.124715 Jy ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.99 mas, bpa=15 degrees ! Estimated noise=995.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00778979 Jy ! Component: 100 - total flux cleaned = 0.0107521 Jy ! Component: 150 - total flux cleaned = 0.0123986 Jy ! Component: 200 - total flux cleaned = 0.0129435 Jy ! Total flux subtracted in 200 components = 0.0129435 Jy ! Clean residual min=-0.002934 max=0.002481 Jy/beam ! Clean residual mean=-0.000012 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.137659 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 89 components and 0.137659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.723 mas, bmaj=29.85 mas, bpa=2.39 degrees ! Estimated noise=1092.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110231 Jy ! Component: 100 - total flux cleaned = 0.00216017 Jy ! Component: 150 - total flux cleaned = 0.0026063 Jy ! Component: 200 - total flux cleaned = 0.00289161 Jy ! Total flux subtracted in 200 components = 0.00289161 Jy ! Clean residual min=-0.001853 max=0.001545 Jy/beam ! Clean residual mean=-0.000010 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.14055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156853 Jy ! Component: 100 - total flux cleaned = 0.000348726 Jy ! Component: 150 - total flux cleaned = 0.000394615 Jy ! Component: 200 - total flux cleaned = 0.000477957 Jy ! Total flux subtracted in 200 components = 0.000477957 Jy ! Clean residual min=-0.001664 max=0.001409 Jy/beam ! Clean residual mean=-0.000011 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.141028 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 138 components and 0.141028 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=18.99 mas, bpa=15 degrees ! Estimated noise=995.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.46643e-07 Jy ! Component: 100 - total flux cleaned = 2.55963e-06 Jy ! Component: 150 - total flux cleaned = 2.6006e-06 Jy ! Component: 200 - total flux cleaned = -0.000112997 Jy ! Total flux subtracted in 200 components = -0.000112997 Jy ! Clean residual min=-0.002063 max=0.001966 Jy/beam ! Clean residual mean=-0.000005 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.140915 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 167 components and 0.140915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120597Jy sigma=0.000757 ! Fit after self-cal, rms=0.120582Jy sigma=0.000757 wmodel J0605-3522_S_2014_06_09_pus_map.mod ! Writing 167 model components to file: J0605-3522_S_2014_06_09_pus_map.mod wobs J0605-3522_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0605-3522_S_2014_06_09_pus_uvs.fits wwins J0605-3522_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J0605-3522_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695762 Jy ! Component: 100 - total flux cleaned = -0.000867721 Jy ! Component: 150 - total flux cleaned = -0.000932138 Jy ! Component: 200 - total flux cleaned = -0.000933119 Jy ! Component: 250 - total flux cleaned = -0.00099233 Jy ! Component: 300 - total flux cleaned = -0.00110474 Jy ! Component: 350 - total flux cleaned = -0.00113144 Jy ! Component: 400 - total flux cleaned = -0.0011585 Jy ! Component: 450 - total flux cleaned = -0.00118511 Jy ! Component: 500 - total flux cleaned = -0.00131135 Jy ! Component: 550 - total flux cleaned = -0.00128711 Jy ! Component: 600 - total flux cleaned = -0.00135896 Jy ! Component: 650 - total flux cleaned = -0.00138243 Jy ! Component: 700 - total flux cleaned = -0.00158879 Jy ! Component: 750 - total flux cleaned = -0.00165593 Jy ! Component: 800 - total flux cleaned = -0.00170061 Jy ! Component: 850 - total flux cleaned = -0.00167904 Jy ! Component: 900 - total flux cleaned = -0.00170083 Jy ! Component: 950 - total flux cleaned = -0.00168017 Jy ! Component: 1000 - total flux cleaned = -0.0017431 Jy ! Component: 1050 - total flux cleaned = -0.00172269 Jy ! Component: 1100 - total flux cleaned = -0.00178368 Jy ! Component: 1150 - total flux cleaned = -0.00174351 Jy ! Component: 1200 - total flux cleaned = -0.00170378 Jy ! Component: 1250 - total flux cleaned = -0.00170371 Jy ! Component: 1300 - total flux cleaned = -0.00170377 Jy ! Component: 1350 - total flux cleaned = -0.00178024 Jy ! Component: 1400 - total flux cleaned = -0.00176138 Jy ! Component: 1450 - total flux cleaned = -0.00185487 Jy ! Component: 1500 - total flux cleaned = -0.00179927 Jy ! Component: 1550 - total flux cleaned = -0.00192767 Jy ! Component: 1600 - total flux cleaned = -0.00194582 Jy ! Component: 1650 - total flux cleaned = -0.00192749 Jy ! Component: 1700 - total flux cleaned = -0.00190942 Jy ! Component: 1750 - total flux cleaned = -0.00192707 Jy ! Component: 1800 - total flux cleaned = -0.00194467 Jy ! Component: 1850 - total flux cleaned = -0.0019623 Jy ! Component: 1900 - total flux cleaned = -0.00194517 Jy ! Component: 1950 - total flux cleaned = -0.00201372 Jy ! Component: 2000 - total flux cleaned = -0.00201369 Jy ! Component: 2050 - total flux cleaned = -0.00203065 Jy ! Component: 2100 - total flux cleaned = -0.00203053 Jy ! Component: 2150 - total flux cleaned = -0.00203069 Jy ! Component: 2200 - total flux cleaned = -0.00207982 Jy ! Component: 2250 - total flux cleaned = -0.00204728 Jy ! Component: 2300 - total flux cleaned = -0.00207968 Jy ! Component: 2350 - total flux cleaned = -0.00206383 Jy ! Component: 2400 - total flux cleaned = -0.00207987 Jy ! Component: 2450 - total flux cleaned = -0.00211148 Jy ! Component: 2500 - total flux cleaned = -0.00215865 Jy ! Component: 2550 - total flux cleaned = -0.00212757 Jy ! Component: 2600 - total flux cleaned = -0.00215859 Jy ! Component: 2650 - total flux cleaned = -0.00221983 Jy ! Component: 2700 - total flux cleaned = -0.00218931 Jy ! Component: 2750 - total flux cleaned = -0.00214415 Jy ! Component: 2800 - total flux cleaned = -0.0021739 Jy ! Component: 2850 - total flux cleaned = -0.00209964 Jy ! Component: 2900 - total flux cleaned = -0.00211434 Jy ! Component: 2950 - total flux cleaned = -0.00209953 Jy ! Component: 3000 - total flux cleaned = -0.00207027 Jy ! Component: 3050 - total flux cleaned = -0.00208461 Jy ! Component: 3100 - total flux cleaned = -0.00204149 Jy ! Component: 3150 - total flux cleaned = -0.0019843 Jy ! Component: 3200 - total flux cleaned = -0.00199851 Jy ! Component: 3250 - total flux cleaned = -0.00192781 Jy ! Component: 3300 - total flux cleaned = -0.00192793 Jy ! Component: 3350 - total flux cleaned = -0.00188604 Jy ! Component: 3400 - total flux cleaned = -0.00188599 Jy ! Component: 3450 - total flux cleaned = -0.00185842 Jy ! Component: 3500 - total flux cleaned = -0.0018448 Jy ! Component: 3550 - total flux cleaned = -0.00184463 Jy ! Component: 3600 - total flux cleaned = -0.00179037 Jy ! Component: 3650 - total flux cleaned = -0.0017498 Jy ! Component: 3700 - total flux cleaned = -0.00169611 Jy ! Component: 3750 - total flux cleaned = -0.0016694 Jy ! Component: 3800 - total flux cleaned = -0.00162942 Jy ! Component: 3850 - total flux cleaned = -0.00160286 Jy ! Component: 3900 - total flux cleaned = -0.00154996 Jy ! Component: 3950 - total flux cleaned = -0.00149728 Jy ! Component: 4000 - total flux cleaned = -0.00148417 Jy ! Component: 4050 - total flux cleaned = -0.00143192 Jy ! Total flux subtracted in 4096 components = -0.00141884 Jy ! Clean residual min=-0.000933 max=0.000788 Jy/beam ! Clean residual mean=0.000002 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.139496 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 442 components and 0.139497 Jy ![Exited script file: muppet] wmap "J0605-3522_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 18.99 at 15 degrees (North through East) ! Clean map min=-0.0029049 max=0.10455 Jy/beam ! Writing clean map to FITS file: J0605-3522_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104552 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255706 device "J0605-3522_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0605-3522_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.733717 0.733717 1.46743 2.93487 5.86974 11.7395 23.479 46.9579 93.9158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 18.99 at 15 degrees (North through East) ! Clean map min=-0.0029049 max=0.10455 Jy/beam quit ! Quitting program ! Log file J0605-3522_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:45:46 2016