! Started logfile: J0603-3144_X_2014_06_09_pus_uvs.log on Sat Nov 19 00:08:13 2016 obs J0603-3144_X_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0603-3144_X_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.470156 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0603-3144 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 30720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0603-3144_X_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980458Jy sigma=0.010259 ! Fit after self-cal, rms=0.933513Jy sigma=0.009806 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7908 mas, bmaj=4.544 mas, bpa=17.96 degrees ! Estimated noise=1138.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541718 Jy ! Component: 100 - total flux cleaned = 0.0663761 Jy ! Total flux subtracted in 100 components = 0.0663761 Jy ! Clean residual min=-0.005019 max=0.004402 Jy/beam ! Clean residual mean=-0.000057 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.0663761 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0663761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084379Jy sigma=0.000772 ! Fit after self-cal, rms=0.083972Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.994 mas, bmaj=4.732 mas, bpa=16.79 degrees ! Estimated noise=403.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700342 Jy ! Component: 100 - total flux cleaned = 0.0110105 Jy ! Component: 150 - total flux cleaned = 0.0136211 Jy ! Component: 200 - total flux cleaned = 0.0153779 Jy ! Total flux subtracted in 200 components = 0.0153779 Jy ! Clean residual min=-0.003857 max=0.003239 Jy/beam ! Clean residual mean=0.000012 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.081754 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 54 components and 0.081754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083395Jy sigma=0.000762 ! Fit after self-cal, rms=0.083407Jy sigma=0.000761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.05 KP 0.89 ! LA 0.96 MK 1.00* NL 1.04 OV 1.03 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.92 KP 0.86 ! LA 1.01 MK 1.00* NL 1.02 OV 1.06 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 0.86 ! LA 1.04 MK 1.00* NL 1.04 OV 1.00 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.98 KP 0.80 ! LA 0.99 MK 1.00* NL 1.04 OV 1.02 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 0.76 ! LA 1.00 MK 1.00* NL 1.00 OV 1.00 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.98 KP 0.77 ! LA 1.09 MK 1.00* NL 1.11 OV 1.06 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 0.78 ! LA 1.05 MK 1.00* NL 1.12 OV 1.06 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.94 KP 0.74 ! LA 1.03 MK 1.00* NL 1.02 OV 1.12 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.94 KP 0.76 ! LA 1.04 MK 1.00* NL 1.07 OV 0.99 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.86 ! LA 1.08 MK 1.00* NL 1.02 OV 1.00 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.81 ! LA 1.10 MK 1.00* NL 0.98 OV 1.03 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.81 KP 0.88 ! LA 1.06 MK 1.00* NL 1.06 OV 1.06 ! PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.083407Jy sigma=0.000761 ! Fit after self-cal, rms=0.081084Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9946 mas, bmaj=4.789 mas, bpa=16.85 degrees ! Estimated noise=399.659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232226 Jy ! Component: 100 - total flux cleaned = 0.0028139 Jy ! Component: 150 - total flux cleaned = 0.00308187 Jy ! Component: 200 - total flux cleaned = 0.00326862 Jy ! Total flux subtracted in 200 components = 0.00326862 Jy ! Clean residual min=-0.001400 max=0.001309 Jy/beam ! Clean residual mean=0.000005 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0850226 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 89 components and 0.0850226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081000Jy sigma=0.000755 ! Fit after self-cal, rms=0.081032Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081032Jy sigma=0.000754 ! Fit after self-cal, rms=0.080957Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9927 mas, bmaj=4.773 mas, bpa=16.76 degrees ! Estimated noise=398.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970492 Jy ! Component: 100 - total flux cleaned = 0.00120639 Jy ! Component: 150 - total flux cleaned = 0.00130767 Jy ! Component: 200 - total flux cleaned = 0.00132436 Jy ! Total flux subtracted in 200 components = 0.00132436 Jy ! Clean residual min=-0.001127 max=0.000880 Jy/beam ! Clean residual mean=0.000003 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.086347 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.086347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080937Jy sigma=0.000753 ! Fit after self-cal, rms=0.080948Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129555 Jy ! Component: 100 - total flux cleaned = 0.000112554 Jy ! Component: 150 - total flux cleaned = 0.000129665 Jy ! Component: 200 - total flux cleaned = 0.000144537 Jy ! Total flux subtracted in 200 components = 0.000144537 Jy ! Clean residual min=-0.001120 max=0.000902 Jy/beam ! Clean residual mean=0.000004 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.0864915 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 110 components and 0.0864915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080940Jy sigma=0.000753 ! Fit after self-cal, rms=0.080934Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080934Jy sigma=0.000753 ! Fit after self-cal, rms=0.081254Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9912 mas, bmaj=4.759 mas, bpa=16.73 degrees ! Estimated noise=398.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348709 Jy ! Component: 100 - total flux cleaned = 0.000348647 Jy ! Component: 150 - total flux cleaned = 0.0003477 Jy ! Component: 200 - total flux cleaned = 0.000347958 Jy ! Total flux subtracted in 200 components = 0.000347958 Jy ! Clean residual min=-0.000980 max=0.000959 Jy/beam ! Clean residual mean=0.000004 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0868394 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 0.0868394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081248Jy sigma=0.000753 ! Fit after self-cal, rms=0.081260Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09652e-05 Jy ! Component: 100 - total flux cleaned = 6.31346e-05 Jy ! Component: 150 - total flux cleaned = 6.30124e-05 Jy ! Component: 200 - total flux cleaned = 7.41609e-05 Jy ! Total flux subtracted in 200 components = 7.41609e-05 Jy ! Clean residual min=-0.000958 max=0.000964 Jy/beam ! Clean residual mean=0.000004 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0869136 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 0.0869136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081256Jy sigma=0.000753 ! Fit after self-cal, rms=0.081253Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081253Jy sigma=0.000753 ! Fit after self-cal, rms=0.081238Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=7.595 mas, bpa=1.783 degrees ! Estimated noise=464.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137044 Jy ! Component: 100 - total flux cleaned = 0.000105473 Jy ! Component: 150 - total flux cleaned = 8.59922e-05 Jy ! Component: 200 - total flux cleaned = 6.77844e-05 Jy ! Total flux subtracted in 200 components = 6.77844e-05 Jy ! Clean residual min=-0.000917 max=0.000951 Jy/beam ! Clean residual mean=0.000006 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0869814 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 0.0869814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081234Jy sigma=0.000753 ! Fit after self-cal, rms=0.081232Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53339e-05 Jy ! Component: 100 - total flux cleaned = -2.45354e-05 Jy ! Component: 150 - total flux cleaned = -5.00596e-05 Jy ! Component: 200 - total flux cleaned = -7.40996e-05 Jy ! Total flux subtracted in 200 components = -7.40996e-05 Jy ! Clean residual min=-0.000882 max=0.000931 Jy/beam ! Clean residual mean=0.000007 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0869073 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 157 components and 0.0869073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081230Jy sigma=0.000753 ! Fit after self-cal, rms=0.081227Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9907 mas, bmaj=4.752 mas, bpa=16.73 degrees ! Estimated noise=398.765 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9907 x 4.752 at 16.73 degrees (North through East) ! Clean map min=-0.001764 max=0.067083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7885 mas, bmaj=4.554 mas, bpa=17.99 degrees ! Estimated noise=1117.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533406 Jy ! Component: 100 - total flux cleaned = 0.0657981 Jy ! Component: 150 - total flux cleaned = 0.0716149 Jy ! Component: 200 - total flux cleaned = 0.0756378 Jy ! Total flux subtracted in 200 components = 0.0756378 Jy ! Clean residual min=-0.002951 max=0.002779 Jy/beam ! Clean residual mean=-0.000036 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0756379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0756379 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9907 mas, bmaj=4.752 mas, bpa=16.73 degrees ! Estimated noise=398.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423022 Jy ! Component: 100 - total flux cleaned = 0.00684241 Jy ! Component: 150 - total flux cleaned = 0.00839246 Jy ! Component: 200 - total flux cleaned = 0.00910247 Jy ! Total flux subtracted in 200 components = 0.00910247 Jy ! Clean residual min=-0.001336 max=0.001196 Jy/beam ! Clean residual mean=-0.000010 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.0847403 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.0847404 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=7.595 mas, bpa=1.783 degrees ! Estimated noise=464.208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011576 Jy ! Component: 100 - total flux cleaned = 0.00146104 Jy ! Component: 150 - total flux cleaned = 0.00159283 Jy ! Component: 200 - total flux cleaned = 0.00169941 Jy ! Total flux subtracted in 200 components = 0.00169941 Jy ! Clean residual min=-0.001046 max=0.001014 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0864398 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.62494e-05 Jy ! Component: 100 - total flux cleaned = 0.000131047 Jy ! Component: 150 - total flux cleaned = 0.000118831 Jy ! Component: 200 - total flux cleaned = 0.000118967 Jy ! Total flux subtracted in 200 components = 0.000118967 Jy ! Clean residual min=-0.000927 max=0.000966 Jy/beam ! Clean residual mean=0.000004 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0865588 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.0865588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9907 mas, bmaj=4.752 mas, bpa=16.73 degrees ! Estimated noise=398.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016139 Jy ! Component: 100 - total flux cleaned = 0.00014083 Jy ! Component: 150 - total flux cleaned = 0.000122904 Jy ! Component: 200 - total flux cleaned = 8.96703e-05 Jy ! Total flux subtracted in 200 components = 8.96703e-05 Jy ! Clean residual min=-0.000955 max=0.000953 Jy/beam ! Clean residual mean=0.000002 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0866484 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.0866484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081238Jy sigma=0.000753 ! Fit after self-cal, rms=0.081220Jy sigma=0.000753 wmodel J0603-3144_X_2014_06_09_pus_map.mod ! Writing 108 model components to file: J0603-3144_X_2014_06_09_pus_map.mod wobs J0603-3144_X_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0603-3144_X_2014_06_09_pus_uvs.fits wwins J0603-3144_X_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0603-3144_X_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193796 Jy ! Component: 100 - total flux cleaned = 0.000348853 Jy ! Component: 150 - total flux cleaned = 0.000460505 Jy ! Component: 200 - total flux cleaned = 0.000499328 Jy ! Component: 250 - total flux cleaned = 0.00049934 Jy ! Component: 300 - total flux cleaned = 0.000534131 Jy ! Component: 350 - total flux cleaned = 0.000512098 Jy ! Component: 400 - total flux cleaned = 0.000480026 Jy ! Component: 450 - total flux cleaned = 0.000408261 Jy ! Component: 500 - total flux cleaned = 0.000359188 Jy ! Component: 550 - total flux cleaned = 0.000302006 Jy ! Component: 600 - total flux cleaned = 0.000236988 Jy ! Component: 650 - total flux cleaned = 0.000173819 Jy ! Component: 700 - total flux cleaned = 0.000121102 Jy ! Component: 750 - total flux cleaned = 6.96389e-05 Jy ! Component: 800 - total flux cleaned = 5.26839e-05 Jy ! Component: 850 - total flux cleaned = -5.00744e-06 Jy ! Component: 900 - total flux cleaned = -2.91308e-05 Jy ! Component: 950 - total flux cleaned = -4.49558e-05 Jy ! Component: 1000 - total flux cleaned = -6.02927e-05 Jy ! Component: 1050 - total flux cleaned = -5.25579e-05 Jy ! Component: 1100 - total flux cleaned = -4.5125e-05 Jy ! Component: 1150 - total flux cleaned = -5.25946e-05 Jy ! Component: 1200 - total flux cleaned = -7.41537e-05 Jy ! Component: 1250 - total flux cleaned = -7.41161e-05 Jy ! Component: 1300 - total flux cleaned = -9.51347e-05 Jy ! Component: 1350 - total flux cleaned = -0.000108987 Jy ! Component: 1400 - total flux cleaned = -0.000129459 Jy ! Component: 1450 - total flux cleaned = -0.000115975 Jy ! Component: 1500 - total flux cleaned = -0.000135885 Jy ! Component: 1550 - total flux cleaned = -0.000129316 Jy ! Component: 1600 - total flux cleaned = -0.000109975 Jy ! Component: 1650 - total flux cleaned = -0.000109952 Jy ! Component: 1700 - total flux cleaned = -0.000116355 Jy ! Component: 1750 - total flux cleaned = -0.000110063 Jy ! Component: 1800 - total flux cleaned = -9.76558e-05 Jy ! Component: 1850 - total flux cleaned = -9.7674e-05 Jy ! Component: 1900 - total flux cleaned = -9.16686e-05 Jy ! Component: 1950 - total flux cleaned = -0.000115601 Jy ! Component: 2000 - total flux cleaned = -9.78093e-05 Jy ! Total flux subtracted in 2048 components = -9.77279e-05 Jy ! Clean residual min=-0.000331 max=0.000298 Jy/beam ! Clean residual mean=0.000003 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0865507 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 217 components and 0.0865507 Jy ![Exited script file: muppet] wmap "J0603-3144_X_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9907 x 4.752 at 16.73 degrees (North through East) ! Clean map min=-0.0012834 max=0.066599 Jy/beam ! Writing clean map to FITS file: J0603-3144_X_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0665991 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113862 device "J0603-3144_X_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0603-3144_X_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5129 0.5129 1.0258 2.0516 4.1032 8.20641 16.4128 32.8256 65.6512 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9907 x 4.752 at 16.73 degrees (North through East) ! Clean map min=-0.0012834 max=0.066599 Jy/beam quit ! Quitting program ! Log file J0603-3144_X_2014_06_09_pus_uvs.log closed on Sat Nov 19 00:08:15 2016