! Started logfile: J0434-2514_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:43:15 2016 obs J0434-2514_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0434-2514_S_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.609183 visibilities/baseline/integration-bin. ! Found source: J0434-2514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 13268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0434-2514_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912566Jy sigma=0.008313 ! Fit after self-cal, rms=0.891357Jy sigma=0.008114 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=11.89 mas, bpa=11.59 degrees ! Estimated noise=1251.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873274 Jy ! Component: 100 - total flux cleaned = 0.106413 Jy ! Total flux subtracted in 100 components = 0.106413 Jy ! Clean residual min=-0.005055 max=0.006185 Jy/beam ! Clean residual mean=-0.000006 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 0.106413 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.106413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092578Jy sigma=0.000784 ! Fit after self-cal, rms=0.092574Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=13.63 mas, bpa=10.35 degrees ! Estimated noise=685.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646708 Jy ! Component: 100 - total flux cleaned = 0.00977087 Jy ! Component: 150 - total flux cleaned = 0.0116301 Jy ! Component: 200 - total flux cleaned = 0.0127017 Jy ! Total flux subtracted in 200 components = 0.0127017 Jy ! Clean residual min=-0.003012 max=0.003543 Jy/beam ! Clean residual mean=0.000011 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.119115 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.119115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092110Jy sigma=0.000780 ! Fit after self-cal, rms=0.092144Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.03 KP 1.06 ! LA 1.20 MK 1.00* NL 0.97 OV 0.97 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.06 KP 1.01 ! LA 1.14 MK 1.00* NL 1.02 OV 0.94 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.09 KP 0.92 ! LA 0.93 MK 1.00* NL 0.98 OV 0.92 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 0.90 ! LA 0.89 MK 1.00* NL 1.01 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Fit before self-cal, rms=0.092144Jy sigma=0.000780 ! Fit after self-cal, rms=0.090955Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=13.72 mas, bpa=10.48 degrees ! Estimated noise=685.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561377 Jy ! Component: 100 - total flux cleaned = -0.000655138 Jy ! Component: 150 - total flux cleaned = -0.000675007 Jy ! Component: 200 - total flux cleaned = -0.00067566 Jy ! Total flux subtracted in 200 components = -0.00067566 Jy ! Clean residual min=-0.002029 max=0.002592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.118439 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.118439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090943Jy sigma=0.000773 ! Fit after self-cal, rms=0.090958Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090958Jy sigma=0.000773 ! Fit after self-cal, rms=0.091295Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=13.74 mas, bpa=10.42 degrees ! Estimated noise=685.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267025 Jy ! Component: 100 - total flux cleaned = -0.000330336 Jy ! Component: 150 - total flux cleaned = -0.000343908 Jy ! Component: 200 - total flux cleaned = -0.000356328 Jy ! Total flux subtracted in 200 components = -0.000356328 Jy ! Clean residual min=-0.001923 max=0.002434 Jy/beam ! Clean residual mean=-0.000002 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.118083 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.118083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091290Jy sigma=0.000772 ! Fit after self-cal, rms=0.091301Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.5, -87). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175334 Jy ! Component: 100 - total flux cleaned = 0.00191814 Jy ! Component: 150 - total flux cleaned = 0.00194841 Jy ! Component: 200 - total flux cleaned = 0.00197437 Jy ! Total flux subtracted in 200 components = 0.00197437 Jy ! Clean residual min=-0.001708 max=0.001612 Jy/beam ! Clean residual mean=-0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.120057 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.120057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091244Jy sigma=0.000772 ! Fit after self-cal, rms=0.091238Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091238Jy sigma=0.000772 ! Fit after self-cal, rms=0.091548Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=13.75 mas, bpa=10.38 degrees ! Estimated noise=684.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304964 Jy ! Component: 100 - total flux cleaned = 0.000224288 Jy ! Component: 150 - total flux cleaned = 0.000224239 Jy ! Component: 200 - total flux cleaned = 0.000224301 Jy ! Total flux subtracted in 200 components = 0.000224301 Jy ! Clean residual min=-0.001646 max=0.001700 Jy/beam ! Clean residual mean=0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.120282 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.120282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091532Jy sigma=0.000771 ! Fit after self-cal, rms=0.091545Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.6933e-05 Jy ! Component: 100 - total flux cleaned = 2.57067e-05 Jy ! Component: 150 - total flux cleaned = 8.28305e-06 Jy ! Component: 200 - total flux cleaned = 8.28511e-06 Jy ! Total flux subtracted in 200 components = 8.28511e-06 Jy ! Clean residual min=-0.001631 max=0.001694 Jy/beam ! Clean residual mean=0.000001 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.12029 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.12029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091538Jy sigma=0.000771 ! Fit after self-cal, rms=0.091537Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091537Jy sigma=0.000771 ! Fit after self-cal, rms=0.091568Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=21.93 mas, bpa=-1.708 degrees ! Estimated noise=776.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145031 Jy ! Component: 100 - total flux cleaned = -0.000168874 Jy ! Component: 150 - total flux cleaned = -0.000212827 Jy ! Component: 200 - total flux cleaned = -0.000222864 Jy ! Total flux subtracted in 200 components = -0.000222864 Jy ! Clean residual min=-0.001618 max=0.001649 Jy/beam ! Clean residual mean=0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.120067 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 101 components and 0.120067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091566Jy sigma=0.000771 ! Fit after self-cal, rms=0.091568Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19567e-05 Jy ! Component: 100 - total flux cleaned = -3.20615e-05 Jy ! Component: 150 - total flux cleaned = -2.28725e-05 Jy ! Component: 200 - total flux cleaned = -1.41711e-05 Jy ! Total flux subtracted in 200 components = -1.41711e-05 Jy ! Clean residual min=-0.001598 max=0.001638 Jy/beam ! Clean residual mean=0.000000 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.120053 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.120053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091567Jy sigma=0.000771 ! Fit after self-cal, rms=0.091567Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=13.76 mas, bpa=10.37 degrees ! Estimated noise=684.095 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.895 x 13.76 at 10.37 degrees (North through East) ! Clean map min=-0.0015651 max=0.10938 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=11.97 mas, bpa=11.64 degrees ! Estimated noise=1245.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867556 Jy ! Component: 100 - total flux cleaned = 0.10575 Jy ! Component: 150 - total flux cleaned = 0.110496 Jy ! Component: 200 - total flux cleaned = 0.112004 Jy ! Total flux subtracted in 200 components = 0.112004 Jy ! Clean residual min=-0.004045 max=0.003498 Jy/beam ! Clean residual mean=-0.000003 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.112004 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.112004 Jy ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=13.76 mas, bpa=10.37 degrees ! Estimated noise=684.095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341591 Jy ! Component: 100 - total flux cleaned = 0.00431511 Jy ! Component: 150 - total flux cleaned = 0.00509605 Jy ! Component: 200 - total flux cleaned = 0.00571868 Jy ! Total flux subtracted in 200 components = 0.00571868 Jy ! Clean residual min=-0.001805 max=0.001582 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.117723 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.117723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=21.93 mas, bpa=-1.708 degrees ! Estimated noise=776.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922048 Jy ! Component: 100 - total flux cleaned = 0.00122416 Jy ! Component: 150 - total flux cleaned = 0.00144504 Jy ! Component: 200 - total flux cleaned = 0.00150079 Jy ! Total flux subtracted in 200 components = 0.00150079 Jy ! Clean residual min=-0.001666 max=0.001606 Jy/beam ! Clean residual mean=-0.000001 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.119224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31442e-05 Jy ! Component: 100 - total flux cleaned = 7.91527e-05 Jy ! Component: 150 - total flux cleaned = 0.000120997 Jy ! Component: 200 - total flux cleaned = 0.000121113 Jy ! Total flux subtracted in 200 components = 0.000121113 Jy ! Clean residual min=-0.001613 max=0.001609 Jy/beam ! Clean residual mean=-0.000000 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.119345 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 0.119345 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=13.76 mas, bpa=10.37 degrees ! Estimated noise=684.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.32405e-05 Jy ! Component: 100 - total flux cleaned = 0.000169135 Jy ! Component: 150 - total flux cleaned = 0.00020416 Jy ! Component: 200 - total flux cleaned = 0.000221377 Jy ! Total flux subtracted in 200 components = 0.000221377 Jy ! Clean residual min=-0.001658 max=0.001712 Jy/beam ! Clean residual mean=0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.119566 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.119566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091574Jy sigma=0.000771 ! Fit after self-cal, rms=0.091567Jy sigma=0.000771 wmodel J0434-2514_S_2014_06_09_pus_map.mod ! Writing 106 model components to file: J0434-2514_S_2014_06_09_pus_map.mod wobs J0434-2514_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0434-2514_S_2014_06_09_pus_uvs.fits wwins J0434-2514_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0434-2514_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230479 Jy ! Component: 100 - total flux cleaned = -0.000663316 Jy ! Component: 150 - total flux cleaned = -0.000766134 Jy ! Component: 200 - total flux cleaned = -0.000886285 Jy ! Component: 250 - total flux cleaned = -0.000954906 Jy ! Component: 300 - total flux cleaned = -0.00108731 Jy ! Component: 350 - total flux cleaned = -0.00130151 Jy ! Component: 400 - total flux cleaned = -0.00146782 Jy ! Component: 450 - total flux cleaned = -0.0016291 Jy ! Component: 500 - total flux cleaned = -0.00180607 Jy ! Component: 550 - total flux cleaned = -0.0019214 Jy ! Component: 600 - total flux cleaned = -0.00209056 Jy ! Component: 650 - total flux cleaned = -0.00218235 Jy ! Component: 700 - total flux cleaned = -0.00228974 Jy ! Component: 750 - total flux cleaned = -0.002325 Jy ! Component: 800 - total flux cleaned = -0.00239429 Jy ! Component: 850 - total flux cleaned = -0.00242828 Jy ! Component: 900 - total flux cleaned = -0.00244494 Jy ! Component: 950 - total flux cleaned = -0.00247786 Jy ! Component: 1000 - total flux cleaned = -0.00244581 Jy ! Component: 1050 - total flux cleaned = -0.00249361 Jy ! Component: 1100 - total flux cleaned = -0.00249373 Jy ! Component: 1150 - total flux cleaned = -0.0025246 Jy ! Component: 1200 - total flux cleaned = -0.00255499 Jy ! Component: 1250 - total flux cleaned = -0.00255527 Jy ! Component: 1300 - total flux cleaned = -0.00264388 Jy ! Component: 1350 - total flux cleaned = -0.00267283 Jy ! Component: 1400 - total flux cleaned = -0.00271587 Jy ! Component: 1450 - total flux cleaned = -0.00272984 Jy ! Component: 1500 - total flux cleaned = -0.00274353 Jy ! Component: 1550 - total flux cleaned = -0.00281252 Jy ! Component: 1600 - total flux cleaned = -0.00281249 Jy ! Component: 1650 - total flux cleaned = -0.00285295 Jy ! Component: 1700 - total flux cleaned = -0.00289294 Jy ! Component: 1750 - total flux cleaned = -0.00294547 Jy ! Component: 1800 - total flux cleaned = -0.00298449 Jy ! Component: 1850 - total flux cleaned = -0.00304881 Jy ! Component: 1900 - total flux cleaned = -0.00312519 Jy ! Component: 1950 - total flux cleaned = -0.003163 Jy ! Component: 2000 - total flux cleaned = -0.00322517 Jy ! Component: 2050 - total flux cleaned = -0.00323731 Jy ! Component: 2100 - total flux cleaned = -0.00328613 Jy ! Component: 2150 - total flux cleaned = -0.00332223 Jy ! Component: 2200 - total flux cleaned = -0.00338197 Jy ! Component: 2250 - total flux cleaned = -0.0034174 Jy ! Component: 2300 - total flux cleaned = -0.00346397 Jy ! Component: 2350 - total flux cleaned = -0.00346383 Jy ! Component: 2400 - total flux cleaned = -0.00349817 Jy ! Component: 2450 - total flux cleaned = -0.00348682 Jy ! Component: 2500 - total flux cleaned = -0.00349822 Jy ! Component: 2550 - total flux cleaned = -0.00352058 Jy ! Component: 2600 - total flux cleaned = -0.00349874 Jy ! Component: 2650 - total flux cleaned = -0.00352053 Jy ! Component: 2700 - total flux cleaned = -0.00354232 Jy ! Component: 2750 - total flux cleaned = -0.00356384 Jy ! Component: 2800 - total flux cleaned = -0.0035425 Jy ! Component: 2850 - total flux cleaned = -0.00355314 Jy ! Component: 2900 - total flux cleaned = -0.00360556 Jy ! Component: 2950 - total flux cleaned = -0.00360551 Jy ! Component: 3000 - total flux cleaned = -0.00366743 Jy ! Component: 3050 - total flux cleaned = -0.00367765 Jy ! Component: 3100 - total flux cleaned = -0.00368788 Jy ! Component: 3150 - total flux cleaned = -0.00374828 Jy ! Component: 3200 - total flux cleaned = -0.0037382 Jy ! Component: 3250 - total flux cleaned = -0.00376799 Jy ! Component: 3300 - total flux cleaned = -0.00379729 Jy ! Component: 3350 - total flux cleaned = -0.00384585 Jy ! Component: 3400 - total flux cleaned = -0.00384584 Jy ! Component: 3450 - total flux cleaned = -0.00382662 Jy ! Component: 3500 - total flux cleaned = -0.00382655 Jy ! Component: 3550 - total flux cleaned = -0.00380764 Jy ! Component: 3600 - total flux cleaned = -0.00385458 Jy ! Component: 3650 - total flux cleaned = -0.00389173 Jy ! Component: 3700 - total flux cleaned = -0.00386401 Jy ! Component: 3750 - total flux cleaned = -0.00389155 Jy ! Component: 3800 - total flux cleaned = -0.00390066 Jy ! Component: 3850 - total flux cleaned = -0.00393671 Jy ! Component: 3900 - total flux cleaned = -0.00391881 Jy ! Component: 3950 - total flux cleaned = -0.00394542 Jy ! Component: 4000 - total flux cleaned = -0.00396313 Jy ! Component: 4050 - total flux cleaned = -0.00393673 Jy ! Total flux subtracted in 4096 components = -0.00391919 Jy ! Clean residual min=-0.000473 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.115647 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 386 components and 0.115647 Jy ![Exited script file: muppet] wmap "J0434-2514_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.895 x 13.76 at 10.37 degrees (North through East) ! Clean map min=-0.0012716 max=0.11052 Jy/beam ! Writing clean map to FITS file: J0434-2514_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110523 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164905 device "J0434-2514_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0434-2514_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.447611 0.447611 0.895221 1.79044 3.58088 7.16177 14.3235 28.6471 57.2942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.895 x 13.76 at 10.37 degrees (North through East) ! Clean map min=-0.0012716 max=0.11052 Jy/beam quit ! Quitting program ! Log file J0434-2514_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:43:19 2016