! Started logfile: J0416-1851_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:42:41 2016
obs J0416-1851_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J0416-1851_S_2014_06_09_pus_uva.fits
! AN table 1: 32 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.456944 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0416-1851
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 2632 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0416-1851_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.584845Jy  sigma=0.005928
! Fit after  self-cal, rms=0.579695Jy  sigma=0.005880
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.698 mas, bmaj=12.23 mas, bpa=5.63 degrees
! Estimated noise=1804.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325597 Jy
! Component: 100  -  total flux cleaned = 0.396599 Jy
! Total flux subtracted in 100 components = 0.396599 Jy
! Clean residual min=-0.013823 max=0.019802 Jy/beam
! Clean residual mean=0.000038 rms=0.004187 Jy/beam
! Combined flux in latest and established models = 0.396599 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.396599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107978Jy  sigma=0.001030
! Fit after  self-cal, rms=0.107976Jy  sigma=0.001030
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.658 mas, bmaj=14.88 mas, bpa=6.512 degrees
! Estimated noise=1396.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244893 Jy
! Component: 100  -  total flux cleaned = 0.0346832 Jy
! Component: 150  -  total flux cleaned = 0.0394643 Jy
! Component: 200  -  total flux cleaned = 0.041613 Jy
! Total flux subtracted in 200 components = 0.041613 Jy
! Clean residual min=-0.012012 max=0.015547 Jy/beam
! Clean residual mean=0.000001 rms=0.003771 Jy/beam
! Combined flux in latest and established models = 0.438212 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.438212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101627Jy  sigma=0.000993
! Fit after  self-cal, rms=0.101627Jy  sigma=0.000993
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     HN        0.95     KP        1.04     
!   LA        1.19     MK        1.00*    NL        1.24     OV        0.98     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     HN        1.00     KP        1.01     
!   LA        1.11     MK        1.00*    NL        1.17     OV        1.01     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.15     HN        1.01     KP        0.91     
!   LA        0.87     MK        1.00*    NL        0.98     OV        0.93     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     HN        1.00     KP        0.88     
!   LA        0.84     MK        1.00*    NL        1.04     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.101627Jy  sigma=0.000993
! Fit after  self-cal, rms=0.087465Jy  sigma=0.000818
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.632 mas, bmaj=14.95 mas, bpa=6.493 degrees
! Estimated noise=1400.81 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00492084 Jy
! Component: 100  -  total flux cleaned = -0.00493777 Jy
! Component: 150  -  total flux cleaned = -0.00481957 Jy
! Component: 200  -  total flux cleaned = -0.00472351 Jy
! Total flux subtracted in 200 components = -0.00472351 Jy
! Clean residual min=-0.007114 max=0.009155 Jy/beam
! Clean residual mean=0.000025 rms=0.002345 Jy/beam
! Combined flux in latest and established models = 0.433488 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.433488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086746Jy  sigma=0.000815
! Fit after  self-cal, rms=0.086768Jy  sigma=0.000814
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086768Jy  sigma=0.000814
! Fit after  self-cal, rms=0.079821Jy  sigma=0.000765
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.629 mas, bmaj=14.9 mas, bpa=6.594 degrees
! Estimated noise=1396.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000763411 Jy
! Component: 100  -  total flux cleaned = 0.000876515 Jy
! Component: 150  -  total flux cleaned = 0.000939077 Jy
! Component: 200  -  total flux cleaned = 0.000967568 Jy
! Total flux subtracted in 200 components = 0.000967568 Jy
! Clean residual min=-0.004108 max=0.005012 Jy/beam
! Clean residual mean=-0.000002 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.434456 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 58 components and 0.434456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079782Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079794Jy  sigma=0.000764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.98475e-05 Jy
! Component: 100  -  total flux cleaned = -0.000134699 Jy
! Component: 150  -  total flux cleaned = -0.000156419 Jy
! Component: 200  -  total flux cleaned = -0.000195398 Jy
! Total flux subtracted in 200 components = -0.000195398 Jy
! Clean residual min=-0.004112 max=0.004846 Jy/beam
! Clean residual mean=-0.000002 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.434261 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 65 components and 0.434261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079779Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079769Jy  sigma=0.000764
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079769Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079653Jy  sigma=0.000764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.623 mas, bmaj=14.88 mas, bpa=6.601 degrees
! Estimated noise=1395.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133378 Jy
! Component: 100  -  total flux cleaned = 0.000234472 Jy
! Component: 150  -  total flux cleaned = 0.000254401 Jy
! Component: 200  -  total flux cleaned = 0.00025551 Jy
! Total flux subtracted in 200 components = 0.00025551 Jy
! Clean residual min=-0.004169 max=0.004704 Jy/beam
! Clean residual mean=-0.000001 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.434516 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 68 components and 0.434516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079639Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079630Jy  sigma=0.000764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012862 Jy
! Component: 100  -  total flux cleaned = -0.000128905 Jy
! Component: 150  -  total flux cleaned = -0.000129637 Jy
! Component: 200  -  total flux cleaned = -0.000130352 Jy
! Total flux subtracted in 200 components = -0.000130352 Jy
! Clean residual min=-0.004184 max=0.004647 Jy/beam
! Clean residual mean=-0.000001 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.434386 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.434386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079623Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079616Jy  sigma=0.000764
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079616Jy  sigma=0.000764
! Fit after  self-cal, rms=0.079537Jy  sigma=0.000764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.109 mas, bmaj=22.09 mas, bpa=-1.578 degrees
! Estimated noise=1544.61 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134735 Jy
! Component: 100  -  total flux cleaned = 0.00015881 Jy
! Component: 150  -  total flux cleaned = 0.000202896 Jy
! Component: 200  -  total flux cleaned = 0.000184707 Jy
! Total flux subtracted in 200 components = 0.000184707 Jy
! Clean residual min=-0.004515 max=0.004973 Jy/beam
! Clean residual mean=0.000002 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.43457 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 76 components and 0.43457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079538Jy  sigma=0.000763
! Fit after  self-cal, rms=0.079514Jy  sigma=0.000763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.06463e-05 Jy
! Component: 100  -  total flux cleaned = -6.09733e-05 Jy
! Component: 150  -  total flux cleaned = -6.1104e-05 Jy
! Component: 200  -  total flux cleaned = -7.70506e-05 Jy
! Total flux subtracted in 200 components = -7.70506e-05 Jy
! Clean residual min=-0.004441 max=0.004900 Jy/beam
! Clean residual mean=0.000002 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.434493 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 76 components and 0.434493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079519Jy  sigma=0.000763
! Fit after  self-cal, rms=0.079497Jy  sigma=0.000763
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.619 mas, bmaj=14.87 mas, bpa=6.607 degrees
! Estimated noise=1395.01 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.619 x 14.87 at 6.607 degrees (North through East)
! Clean map  min=-0.0040047  max=0.42195 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=12.19 mas, bpa=5.719 degrees
! Estimated noise=1800.76 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.324726 Jy
! Component: 100  -  total flux cleaned = 0.395542 Jy
! Component: 150  -  total flux cleaned = 0.414371 Jy
! Component: 200  -  total flux cleaned = 0.423789 Jy
! Total flux subtracted in 200 components = 0.423789 Jy
! Clean residual min=-0.005708 max=0.005590 Jy/beam
! Clean residual mean=0.000010 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.423789 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.423789 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.619 mas, bmaj=14.87 mas, bpa=6.607 degrees
! Estimated noise=1395.01 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00774382 Jy
! Component: 100  -  total flux cleaned = 0.0108395 Jy
! Component: 150  -  total flux cleaned = 0.0110032 Jy
! Component: 200  -  total flux cleaned = 0.0110662 Jy
! Total flux subtracted in 200 components = 0.0110662 Jy
! Clean residual min=-0.004057 max=0.004580 Jy/beam
! Clean residual mean=-0.000002 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.434855 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.434855 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.109 mas, bmaj=22.09 mas, bpa=-1.578 degrees
! Estimated noise=1544.61 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147084 Jy
! Component: 100  -  total flux cleaned = 0.000247936 Jy
! Component: 150  -  total flux cleaned = 0.000326019 Jy
! Component: 200  -  total flux cleaned = 0.000322666 Jy
! Total flux subtracted in 200 components = 0.000322666 Jy
! Clean residual min=-0.004653 max=0.004882 Jy/beam
! Clean residual mean=-0.000001 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.435178 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.33756e-06 Jy
! Component: 100  -  total flux cleaned = -3.05147e-05 Jy
! Component: 150  -  total flux cleaned = -7.68742e-05 Jy
! Component: 200  -  total flux cleaned = -9.97483e-05 Jy
! Total flux subtracted in 200 components = -9.97483e-05 Jy
! Clean residual min=-0.004586 max=0.004871 Jy/beam
! Clean residual mean=-0.000000 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.435078 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.435078 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.619 mas, bmaj=14.87 mas, bpa=6.607 degrees
! Estimated noise=1395.01 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.15928e-05 Jy
! Component: 100  -  total flux cleaned = -7.73776e-05 Jy
! Component: 150  -  total flux cleaned = -0.000179089 Jy
! Component: 200  -  total flux cleaned = -0.000287091 Jy
! Total flux subtracted in 200 components = -0.000287091 Jy
! Clean residual min=-0.003999 max=0.004460 Jy/beam
! Clean residual mean=-0.000001 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.434791 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.434791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079510Jy  sigma=0.000763
! Fit after  self-cal, rms=0.079501Jy  sigma=0.000763
wmodel J0416-1851_S_2014_06_09_pus_map.mod
! Writing 57 model components to file: J0416-1851_S_2014_06_09_pus_map.mod
wobs J0416-1851_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J0416-1851_S_2014_06_09_pus_uvs.fits
wwins J0416-1851_S_2014_06_09_pus_map.win
! wwins: Wrote 1 windows to J0416-1851_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159663 Jy
! Component: 100  -  total flux cleaned = 0.0022146 Jy
! Component: 150  -  total flux cleaned = 0.00246203 Jy
! Component: 200  -  total flux cleaned = 0.00251793 Jy
! Component: 250  -  total flux cleaned = 0.00257431 Jy
! Component: 300  -  total flux cleaned = 0.00267499 Jy
! Component: 350  -  total flux cleaned = 0.00286704 Jy
! Component: 400  -  total flux cleaned = 0.00282194 Jy
! Component: 450  -  total flux cleaned = 0.00282308 Jy
! Component: 500  -  total flux cleaned = 0.00278008 Jy
! Component: 550  -  total flux cleaned = 0.0026548 Jy
! Component: 600  -  total flux cleaned = 0.00245463 Jy
! Component: 650  -  total flux cleaned = 0.00229935 Jy
! Component: 700  -  total flux cleaned = 0.00222298 Jy
! Component: 750  -  total flux cleaned = 0.00211316 Jy
! Component: 800  -  total flux cleaned = 0.00189874 Jy
! Component: 850  -  total flux cleaned = 0.00165411 Jy
! Component: 900  -  total flux cleaned = 0.00144872 Jy
! Component: 950  -  total flux cleaned = 0.00124811 Jy
! Component: 1000  -  total flux cleaned = 0.000986698 Jy
! Component: 1050  -  total flux cleaned = 0.000730879 Jy
! Component: 1100  -  total flux cleaned = 0.00054232 Jy
! Component: 1150  -  total flux cleaned = 0.000265233 Jy
! Component: 1200  -  total flux cleaned = -6.33706e-06 Jy
! Component: 1250  -  total flux cleaned = -0.00033086 Jy
! Component: 1300  -  total flux cleaned = -0.000504337 Jy
! Component: 1350  -  total flux cleaned = -0.000675257 Jy
! Component: 1400  -  total flux cleaned = -0.000759083 Jy
! Component: 1450  -  total flux cleaned = -0.000787211 Jy
! Component: 1500  -  total flux cleaned = -0.000950011 Jy
! Component: 1550  -  total flux cleaned = -0.00108351 Jy
! Component: 1600  -  total flux cleaned = -0.00118799 Jy
! Component: 1650  -  total flux cleaned = -0.00121349 Jy
! Component: 1700  -  total flux cleaned = -0.00128963 Jy
! Component: 1750  -  total flux cleaned = -0.00133975 Jy
! Component: 1800  -  total flux cleaned = -0.00136503 Jy
! Component: 1850  -  total flux cleaned = -0.00143861 Jy
! Component: 1900  -  total flux cleaned = -0.0015346 Jy
! Component: 1950  -  total flux cleaned = -0.00158184 Jy
! Component: 2000  -  total flux cleaned = -0.0016051 Jy
! Component: 2050  -  total flux cleaned = -0.00162765 Jy
! Component: 2100  -  total flux cleaned = -0.00160454 Jy
! Component: 2150  -  total flux cleaned = -0.00155967 Jy
! Component: 2200  -  total flux cleaned = -0.00155982 Jy
! Component: 2250  -  total flux cleaned = -0.0015813 Jy
! Component: 2300  -  total flux cleaned = -0.00155967 Jy
! Component: 2350  -  total flux cleaned = -0.00158164 Jy
! Component: 2400  -  total flux cleaned = -0.0016034 Jy
! Component: 2450  -  total flux cleaned = -0.00168767 Jy
! Component: 2500  -  total flux cleaned = -0.00168761 Jy
! Component: 2550  -  total flux cleaned = -0.00174921 Jy
! Component: 2600  -  total flux cleaned = -0.0017694 Jy
! Component: 2650  -  total flux cleaned = -0.00176937 Jy
! Component: 2700  -  total flux cleaned = -0.00184912 Jy
! Component: 2750  -  total flux cleaned = -0.00182917 Jy
! Component: 2800  -  total flux cleaned = -0.00179 Jy
! Component: 2850  -  total flux cleaned = -0.00180972 Jy
! Component: 2900  -  total flux cleaned = -0.00179024 Jy
! Component: 2950  -  total flux cleaned = -0.00177095 Jy
! Component: 3000  -  total flux cleaned = -0.00173293 Jy
! Component: 3050  -  total flux cleaned = -0.00175165 Jy
! Component: 3100  -  total flux cleaned = -0.00171442 Jy
! Component: 3150  -  total flux cleaned = -0.00180701 Jy
! Component: 3200  -  total flux cleaned = -0.00175161 Jy
! Component: 3250  -  total flux cleaned = -0.00184322 Jy
! Component: 3300  -  total flux cleaned = -0.00186135 Jy
! Component: 3350  -  total flux cleaned = -0.00189721 Jy
! Component: 3400  -  total flux cleaned = -0.00193292 Jy
! Component: 3450  -  total flux cleaned = -0.00198628 Jy
! Component: 3500  -  total flux cleaned = -0.00205709 Jy
! Component: 3550  -  total flux cleaned = -0.00205704 Jy
! Component: 3600  -  total flux cleaned = -0.00212711 Jy
! Component: 3650  -  total flux cleaned = -0.0021794 Jy
! Component: 3700  -  total flux cleaned = -0.00223136 Jy
! Component: 3750  -  total flux cleaned = -0.00221404 Jy
! Component: 3800  -  total flux cleaned = -0.00235113 Jy
! Component: 3850  -  total flux cleaned = -0.00235107 Jy
! Component: 3900  -  total flux cleaned = -0.00241896 Jy
! Component: 3950  -  total flux cleaned = -0.00248652 Jy
! Component: 4000  -  total flux cleaned = -0.00252011 Jy
! Component: 4050  -  total flux cleaned = -0.00253691 Jy
! Total flux subtracted in 4096 components = -0.00260377 Jy
! Clean residual min=-0.000864 max=0.001106 Jy/beam
! Clean residual mean=0.000010 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.432187 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 321 components and 0.432187 Jy
![Exited script file: muppet]
wmap "J0416-1851_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.619 x 14.87 at 6.607 degrees (North through East)
! Clean map  min=-0.0021977  max=0.42097 Jy/beam
! Writing clean map to FITS file: J0416-1851_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.420975 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000318511 
device "J0416-1851_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0416-1851_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.226981 0.226981 0.453962 0.907925 1.81585 3.6317 7.2634 14.5268 29.0536 58.1072
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.42 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.619 x 14.87 at 6.607 degrees (North through East)
! Clean map  min=-0.0021977  max=0.42097 Jy/beam
quit
! Quitting program
! Log file J0416-1851_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:42:46 2016