! Started logfile: J0411-2758_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:42:37 2016
obs J0411-2758_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J0411-2758_S_2014_06_09_pus_uva.fits
! AN table 1: 120 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.608519 visibilities/baseline/integration-bin.
! Found source: J0411-2758
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 13144 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0411-2758_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 253 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 253 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 253 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 253 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.967123Jy  sigma=0.008325
! Fit after  self-cal, rms=0.915768Jy  sigma=0.007895
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.002 mas, bmaj=12.39 mas, bpa=14.88 degrees
! Estimated noise=1135.39 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.067729 Jy
! Component: 100  -  total flux cleaned = 0.0833721 Jy
! Total flux subtracted in 100 components = 0.0833721 Jy
! Clean residual min=-0.004890 max=0.006321 Jy/beam
! Clean residual mean=-0.000001 rms=0.001355 Jy/beam
! Combined flux in latest and established models = 0.0833721 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0833721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098083Jy  sigma=0.000776
! Fit after  self-cal, rms=0.098001Jy  sigma=0.000776
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.878 mas, bmaj=14.4 mas, bpa=12.05 degrees
! Estimated noise=728.572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108969 Jy
! Component: 100  -  total flux cleaned = 0.0166755 Jy
! Component: 150  -  total flux cleaned = 0.0201145 Jy
! Component: 200  -  total flux cleaned = 0.0222283 Jy
! Total flux subtracted in 200 components = 0.0222283 Jy
! Clean residual min=-0.002646 max=0.003150 Jy/beam
! Clean residual mean=0.000005 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.1056 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 71 components and 0.1056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096856Jy  sigma=0.000765
! Fit after  self-cal, rms=0.096787Jy  sigma=0.000764
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.82     HN        1.05     KP        1.02     
!   LA        1.22     MK        1.00*    NL        1.00     OV        1.00     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HN        1.10     KP        1.00     
!   LA        1.17     MK        1.00*    NL        1.03     OV        0.99     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.09     HN        1.05     KP        0.90     
!   LA        0.87     MK        1.00*    NL        1.00     OV        0.95     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     HN        1.01     KP        0.89     
!   LA        0.89     MK        1.00*    NL        1.11     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.096787Jy  sigma=0.000764
! Fit after  self-cal, rms=0.095921Jy  sigma=0.000758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.871 mas, bmaj=14.54 mas, bpa=12.24 degrees
! Estimated noise=721.929 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000882936 Jy
! Component: 100  -  total flux cleaned = 0.000751077 Jy
! Component: 150  -  total flux cleaned = 0.000679892 Jy
! Component: 200  -  total flux cleaned = 0.000616277 Jy
! Total flux subtracted in 200 components = 0.000616277 Jy
! Clean residual min=-0.002192 max=0.002233 Jy/beam
! Clean residual mean=-0.000010 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.106217 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.106217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095877Jy  sigma=0.000758
! Fit after  self-cal, rms=0.095916Jy  sigma=0.000757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095916Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096004Jy  sigma=0.000757
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.862 mas, bmaj=14.49 mas, bpa=12.25 degrees
! Estimated noise=721.507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567893 Jy
! Component: 100  -  total flux cleaned = 0.000511994 Jy
! Component: 150  -  total flux cleaned = 0.000466894 Jy
! Component: 200  -  total flux cleaned = 0.000405092 Jy
! Total flux subtracted in 200 components = 0.000405092 Jy
! Clean residual min=-0.001954 max=0.002121 Jy/beam
! Clean residual mean=-0.000007 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.106622 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.106622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095987Jy  sigma=0.000757
! Fit after  self-cal, rms=0.095984Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.46993e-05 Jy
! Component: 100  -  total flux cleaned = 2.28612e-05 Jy
! Component: 150  -  total flux cleaned = -1.33576e-05 Jy
! Component: 200  -  total flux cleaned = -4.61219e-05 Jy
! Total flux subtracted in 200 components = -4.61219e-05 Jy
! Clean residual min=-0.001929 max=0.002090 Jy/beam
! Clean residual mean=-0.000008 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.106576 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 120 components and 0.106576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095975Jy  sigma=0.000757
! Fit after  self-cal, rms=0.095969Jy  sigma=0.000757
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095969Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096105Jy  sigma=0.000757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.853 mas, bmaj=14.46 mas, bpa=12.27 degrees
! Estimated noise=720.943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201221 Jy
! Component: 100  -  total flux cleaned = 0.000133984 Jy
! Component: 150  -  total flux cleaned = 9.00052e-05 Jy
! Component: 200  -  total flux cleaned = 6.42215e-05 Jy
! Total flux subtracted in 200 components = 6.42215e-05 Jy
! Clean residual min=-0.001936 max=0.002019 Jy/beam
! Clean residual mean=-0.000005 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.10664 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 130 components and 0.10664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096099Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096102Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.95365e-05 Jy
! Component: 100  -  total flux cleaned = 1.36609e-05 Jy
! Component: 150  -  total flux cleaned = 1.88936e-06 Jy
! Component: 200  -  total flux cleaned = -9.71574e-06 Jy
! Total flux subtracted in 200 components = -9.71574e-06 Jy
! Clean residual min=-0.001912 max=0.002015 Jy/beam
! Clean residual mean=-0.000005 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.10663 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 144 components and 0.10663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096099Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096097Jy  sigma=0.000757
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096097Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096074Jy  sigma=0.000757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.863 mas, bmaj=23.18 mas, bpa=0.5478 degrees
! Estimated noise=817.156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114272 Jy
! Component: 100  -  total flux cleaned = 6.45079e-05 Jy
! Component: 150  -  total flux cleaned = 2.1582e-05 Jy
! Component: 200  -  total flux cleaned = -1.58961e-05 Jy
! Total flux subtracted in 200 components = -1.58961e-05 Jy
! Clean residual min=-0.001932 max=0.001636 Jy/beam
! Clean residual mean=-0.000009 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.106614 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 153 components and 0.106614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096072Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096066Jy  sigma=0.000757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.55899e-05 Jy
! Component: 100  -  total flux cleaned = 4.69305e-05 Jy
! Component: 150  -  total flux cleaned = 1.29019e-05 Jy
! Component: 200  -  total flux cleaned = -1.03992e-05 Jy
! Total flux subtracted in 200 components = -1.03992e-05 Jy
! Clean residual min=-0.001935 max=0.001645 Jy/beam
! Clean residual mean=-0.000010 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.106604 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 159 components and 0.106604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096065Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096064Jy  sigma=0.000757
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=14.45 mas, bpa=12.3 degrees
! Estimated noise=720.466 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 14.45 at 12.3 degrees (North through East)
! Clean map  min=-0.0022314  max=0.084896 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.97 mas, bmaj=12.44 mas, bpa=14.99 degrees
! Estimated noise=1116.32 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0661318 Jy
! Component: 100  -  total flux cleaned = 0.0822072 Jy
! Component: 150  -  total flux cleaned = 0.0904799 Jy
! Component: 200  -  total flux cleaned = 0.0956999 Jy
! Total flux subtracted in 200 components = 0.0956999 Jy
! Clean residual min=-0.003756 max=0.003440 Jy/beam
! Clean residual mean=-0.000002 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.0956999 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0956999 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=14.45 mas, bpa=12.3 degrees
! Estimated noise=720.466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507474 Jy
! Component: 100  -  total flux cleaned = 0.00779214 Jy
! Component: 150  -  total flux cleaned = 0.00882671 Jy
! Component: 200  -  total flux cleaned = 0.00942674 Jy
! Total flux subtracted in 200 components = 0.00942674 Jy
! Clean residual min=-0.001953 max=0.002017 Jy/beam
! Clean residual mean=-0.000008 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.105127 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 63 components and 0.105127 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.863 mas, bmaj=23.18 mas, bpa=0.5478 degrees
! Estimated noise=817.156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608913 Jy
! Component: 100  -  total flux cleaned = 0.000747745 Jy
! Component: 150  -  total flux cleaned = 0.000918392 Jy
! Component: 200  -  total flux cleaned = 0.00103025 Jy
! Total flux subtracted in 200 components = 0.00103025 Jy
! Clean residual min=-0.001882 max=0.001646 Jy/beam
! Clean residual mean=-0.000011 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.106157 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100593 Jy
! Component: 100  -  total flux cleaned = 0.000135636 Jy
! Component: 150  -  total flux cleaned = 0.000124665 Jy
! Component: 200  -  total flux cleaned = 0.000124699 Jy
! Total flux subtracted in 200 components = 0.000124699 Jy
! Clean residual min=-0.001894 max=0.001669 Jy/beam
! Clean residual mean=-0.000010 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.106282 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 91 components and 0.106282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=14.45 mas, bpa=12.3 degrees
! Estimated noise=720.466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.8497e-05 Jy
! Component: 100  -  total flux cleaned = 7.83191e-06 Jy
! Component: 150  -  total flux cleaned = 6.82613e-05 Jy
! Component: 200  -  total flux cleaned = 8.63615e-05 Jy
! Total flux subtracted in 200 components = 8.63615e-05 Jy
! Clean residual min=-0.001933 max=0.002047 Jy/beam
! Clean residual mean=-0.000006 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.106368 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 109 components and 0.106368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096075Jy  sigma=0.000757
! Fit after  self-cal, rms=0.096061Jy  sigma=0.000757
wmodel J0411-2758_S_2014_06_09_pus_map.mod
! Writing 109 model components to file: J0411-2758_S_2014_06_09_pus_map.mod
wobs J0411-2758_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J0411-2758_S_2014_06_09_pus_uvs.fits
wwins J0411-2758_S_2014_06_09_pus_map.win
! wwins: Wrote 2 windows to J0411-2758_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.53498e-05 Jy
! Component: 100  -  total flux cleaned = -0.000156496 Jy
! Component: 150  -  total flux cleaned = -0.000218822 Jy
! Component: 200  -  total flux cleaned = -0.000304648 Jy
! Component: 250  -  total flux cleaned = -0.000331446 Jy
! Component: 300  -  total flux cleaned = -0.000409562 Jy
! Component: 350  -  total flux cleaned = -0.000434269 Jy
! Component: 400  -  total flux cleaned = -0.000311432 Jy
! Component: 450  -  total flux cleaned = -0.000240248 Jy
! Component: 500  -  total flux cleaned = -0.000124643 Jy
! Component: 550  -  total flux cleaned = -5.72908e-05 Jy
! Component: 600  -  total flux cleaned = -3.47922e-05 Jy
! Component: 650  -  total flux cleaned = 5.13337e-05 Jy
! Component: 700  -  total flux cleaned = 0.000134945 Jy
! Component: 750  -  total flux cleaned = 0.000175894 Jy
! Component: 800  -  total flux cleaned = 0.000277262 Jy
! Component: 850  -  total flux cleaned = 0.000337048 Jy
! Component: 900  -  total flux cleaned = 0.000395579 Jy
! Component: 950  -  total flux cleaned = 0.000414863 Jy
! Component: 1000  -  total flux cleaned = 0.000470664 Jy
! Component: 1050  -  total flux cleaned = 0.00047026 Jy
! Component: 1100  -  total flux cleaned = 0.000506288 Jy
! Component: 1150  -  total flux cleaned = 0.000470834 Jy
! Component: 1200  -  total flux cleaned = 0.00047109 Jy
! Component: 1250  -  total flux cleaned = 0.000453725 Jy
! Component: 1300  -  total flux cleaned = 0.000420354 Jy
! Component: 1350  -  total flux cleaned = 0.00040393 Jy
! Component: 1400  -  total flux cleaned = 0.000354785 Jy
! Component: 1450  -  total flux cleaned = 0.000354912 Jy
! Component: 1500  -  total flux cleaned = 0.00033902 Jy
! Component: 1550  -  total flux cleaned = 0.000370527 Jy
! Component: 1600  -  total flux cleaned = 0.000308437 Jy
! Component: 1650  -  total flux cleaned = 0.000232166 Jy
! Component: 1700  -  total flux cleaned = 0.000142058 Jy
! Component: 1750  -  total flux cleaned = 0.000142226 Jy
! Component: 1800  -  total flux cleaned = 0.000156558 Jy
! Component: 1850  -  total flux cleaned = 4.03023e-05 Jy
! Component: 1900  -  total flux cleaned = 1.1818e-05 Jy
! Component: 1950  -  total flux cleaned = 1.19838e-05 Jy
! Component: 2000  -  total flux cleaned = -4.41343e-05 Jy
! Component: 2050  -  total flux cleaned = -5.77585e-05 Jy
! Component: 2100  -  total flux cleaned = -5.77405e-05 Jy
! Component: 2150  -  total flux cleaned = -0.000125495 Jy
! Component: 2200  -  total flux cleaned = -0.000138815 Jy
! Component: 2250  -  total flux cleaned = -0.000231457 Jy
! Component: 2300  -  total flux cleaned = -0.000257458 Jy
! Component: 2350  -  total flux cleaned = -0.000335272 Jy
! Component: 2400  -  total flux cleaned = -0.000360849 Jy
! Component: 2450  -  total flux cleaned = -0.000386212 Jy
! Component: 2500  -  total flux cleaned = -0.000449086 Jy
! Component: 2550  -  total flux cleaned = -0.000486393 Jy
! Component: 2600  -  total flux cleaned = -0.000535724 Jy
! Component: 2650  -  total flux cleaned = -0.000572254 Jy
! Component: 2700  -  total flux cleaned = -0.000572364 Jy
! Component: 2750  -  total flux cleaned = -0.000584359 Jy
! Component: 2800  -  total flux cleaned = -0.000631882 Jy
! Component: 2850  -  total flux cleaned = -0.000643674 Jy
! Component: 2900  -  total flux cleaned = -0.000690467 Jy
! Component: 2950  -  total flux cleaned = -0.000759941 Jy
! Component: 3000  -  total flux cleaned = -0.000794422 Jy
! Component: 3050  -  total flux cleaned = -0.000828736 Jy
! Component: 3100  -  total flux cleaned = -0.000851297 Jy
! Component: 3150  -  total flux cleaned = -0.000851192 Jy
! Component: 3200  -  total flux cleaned = -0.000895802 Jy
! Component: 3250  -  total flux cleaned = -0.000917878 Jy
! Component: 3300  -  total flux cleaned = -0.000939815 Jy
! Component: 3350  -  total flux cleaned = -0.000972421 Jy
! Component: 3400  -  total flux cleaned = -0.000993985 Jy
! Component: 3450  -  total flux cleaned = -0.000994011 Jy
! Component: 3500  -  total flux cleaned = -0.0010259 Jy
! Component: 3550  -  total flux cleaned = -0.00103637 Jy
! Component: 3600  -  total flux cleaned = -0.00107833 Jy
! Component: 3650  -  total flux cleaned = -0.00109909 Jy
! Component: 3700  -  total flux cleaned = -0.00113008 Jy
! Component: 3750  -  total flux cleaned = -0.00115052 Jy
! Component: 3800  -  total flux cleaned = -0.00120126 Jy
! Component: 3850  -  total flux cleaned = -0.00121137 Jy
! Component: 3900  -  total flux cleaned = -0.00123155 Jy
! Component: 3950  -  total flux cleaned = -0.00128135 Jy
! Component: 4000  -  total flux cleaned = -0.00130116 Jy
! Component: 4050  -  total flux cleaned = -0.00130116 Jy
! Total flux subtracted in 4096 components = -0.00136936 Jy
! Clean residual min=-0.000688 max=0.000747 Jy/beam
! Clean residual mean=-0.000001 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.104999 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 383 components and 0.104999 Jy
![Exited script file: muppet]
wmap "J0411-2758_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 14.45 at 12.3 degrees (North through East)
! Clean map  min=-0.0021273  max=0.084497 Jy/beam
! Writing clean map to FITS file: J0411-2758_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0844969 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000186273 
device "J0411-2758_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0411-2758_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.66135 0.66135 1.3227 2.6454 5.2908 10.5816 21.1632 42.3264 84.6528
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.084 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 14.45 at 12.3 degrees (North through East)
! Clean map  min=-0.0021273  max=0.084497 Jy/beam
quit
! Quitting program
! Log file J0411-2758_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:42:41 2016