! Started logfile: J0236-2953_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:41:49 2016
obs J0236-2953_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J0236-2953_S_2014_06_09_pus_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.297585 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0236-2953
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 2464 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0236-2953_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 220 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 220 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 220 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 220 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.800027Jy  sigma=0.006822
! Fit after  self-cal, rms=0.791363Jy  sigma=0.006751
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=13.26 mas, bpa=8.433 degrees
! Estimated noise=2156.23 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166471 Jy
! Component: 100  -  total flux cleaned = 0.204382 Jy
! Total flux subtracted in 100 components = 0.204382 Jy
! Clean residual min=-0.010700 max=0.016786 Jy/beam
! Clean residual mean=0.000016 rms=0.003111 Jy/beam
! Combined flux in latest and established models = 0.204382 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.204382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101591Jy  sigma=0.000807
! Fit after  self-cal, rms=0.101589Jy  sigma=0.000807
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.734 mas, bmaj=15.2 mas, bpa=8.146 degrees
! Estimated noise=1696.19 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.5, -81).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174251 Jy
! Component: 100  -  total flux cleaned = 0.0256828 Jy
! Component: 150  -  total flux cleaned = 0.0272132 Jy
! Component: 200  -  total flux cleaned = 0.0278856 Jy
! Total flux subtracted in 200 components = 0.0278856 Jy
! Clean residual min=-0.007102 max=0.007497 Jy/beam
! Clean residual mean=0.000024 rms=0.001825 Jy/beam
! Combined flux in latest and established models = 0.232267 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 39 components and 0.232267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098666Jy  sigma=0.000782
! Fit after  self-cal, rms=0.098634Jy  sigma=0.000781
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.82     HN        1.06     KP        1.04     
!   LA        1.20     MK        1.00*    NL        1.03     OV        0.96     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        1.12     KP        0.98     
!   LA        1.15     MK        1.00*    NL        1.00     OV        0.97     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        1.05     KP        0.88     
!   LA        0.91     MK        1.00*    NL        0.95     OV        0.95     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.07     KP        0.88     
!   LA        0.88     MK        1.00*    NL        1.04     OV        0.98     
!   PT        1.02     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.098634Jy  sigma=0.000781
! Fit after  self-cal, rms=0.097423Jy  sigma=0.000760
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.797 mas, bmaj=14.82 mas, bpa=8.211 degrees
! Estimated noise=1763.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00224244 Jy
! Component: 100  -  total flux cleaned = -0.00291432 Jy
! Component: 150  -  total flux cleaned = -0.00332218 Jy
! Component: 200  -  total flux cleaned = -0.0034673 Jy
! Total flux subtracted in 200 components = -0.0034673 Jy
! Clean residual min=-0.004683 max=0.004560 Jy/beam
! Clean residual mean=0.000019 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 0.2288 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.2288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097225Jy  sigma=0.000759
! Fit after  self-cal, rms=0.097248Jy  sigma=0.000759
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097248Jy  sigma=0.000759
! Fit after  self-cal, rms=0.097179Jy  sigma=0.000759
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.797 mas, bmaj=14.85 mas, bpa=8.249 degrees
! Estimated noise=1756.83 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186667 Jy
! Component: 100  -  total flux cleaned = -0.00236086 Jy
! Component: 150  -  total flux cleaned = -0.0026025 Jy
! Component: 200  -  total flux cleaned = -0.00265558 Jy
! Total flux subtracted in 200 components = -0.00265558 Jy
! Clean residual min=-0.004367 max=0.004396 Jy/beam
! Clean residual mean=0.000017 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.226144 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 79 components and 0.226144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097076Jy  sigma=0.000758
! Fit after  self-cal, rms=0.097080Jy  sigma=0.000758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227105 Jy
! Component: 100  -  total flux cleaned = -0.000326678 Jy
! Component: 150  -  total flux cleaned = -0.000417154 Jy
! Component: 200  -  total flux cleaned = -0.000504044 Jy
! Total flux subtracted in 200 components = -0.000504044 Jy
! Clean residual min=-0.004355 max=0.004502 Jy/beam
! Clean residual mean=0.000018 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.22564 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 92 components and 0.22564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097028Jy  sigma=0.000758
! Fit after  self-cal, rms=0.097028Jy  sigma=0.000758
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097028Jy  sigma=0.000758
! Fit after  self-cal, rms=0.097309Jy  sigma=0.000756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.798 mas, bmaj=14.86 mas, bpa=8.234 degrees
! Estimated noise=1753.17 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118187 Jy
! Component: 100  -  total flux cleaned = -0.0013425 Jy
! Component: 150  -  total flux cleaned = -0.00157617 Jy
! Component: 200  -  total flux cleaned = -0.00161855 Jy
! Total flux subtracted in 200 components = -0.00161855 Jy
! Clean residual min=-0.004338 max=0.004122 Jy/beam
! Clean residual mean=0.000013 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.224022 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.224022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097250Jy  sigma=0.000755
! Fit after  self-cal, rms=0.097295Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207349 Jy
! Component: 100  -  total flux cleaned = -0.000206618 Jy
! Component: 150  -  total flux cleaned = -0.000279944 Jy
! Component: 200  -  total flux cleaned = -0.000312551 Jy
! Total flux subtracted in 200 components = -0.000312551 Jy
! Clean residual min=-0.004316 max=0.004043 Jy/beam
! Clean residual mean=0.000014 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.223709 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.223709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097265Jy  sigma=0.000755
! Fit after  self-cal, rms=0.097260Jy  sigma=0.000755
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097260Jy  sigma=0.000755
! Fit after  self-cal, rms=0.097446Jy  sigma=0.000755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.346 mas, bmaj=20.58 mas, bpa=-1.71 degrees
! Estimated noise=1996.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111497 Jy
! Component: 100  -  total flux cleaned = -0.00124412 Jy
! Component: 150  -  total flux cleaned = -0.0012995 Jy
! Component: 200  -  total flux cleaned = -0.00135021 Jy
! Total flux subtracted in 200 components = -0.00135021 Jy
! Clean residual min=-0.003262 max=0.003624 Jy/beam
! Clean residual mean=0.000021 rms=0.001000 Jy/beam
! Combined flux in latest and established models = 0.222359 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 141 components and 0.222359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097431Jy  sigma=0.000755
! Fit after  self-cal, rms=0.097436Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000200694 Jy
! Component: 100  -  total flux cleaned = -0.000252672 Jy
! Component: 150  -  total flux cleaned = -0.000299621 Jy
! Component: 200  -  total flux cleaned = -0.000382628 Jy
! Total flux subtracted in 200 components = -0.000382628 Jy
! Clean residual min=-0.003251 max=0.003655 Jy/beam
! Clean residual mean=0.000022 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.221976 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 0.221976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097427Jy  sigma=0.000755
! Fit after  self-cal, rms=0.097423Jy  sigma=0.000755
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.797 mas, bmaj=14.87 mas, bpa=8.254 degrees
! Estimated noise=1751.05 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.797 x 14.87 at 8.254 degrees (North through East)
! Clean map  min=-0.0063873  max=0.20699 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.195 mas, bmaj=13.36 mas, bpa=8.818 degrees
! Estimated noise=2280.37 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164032 Jy
! Component: 100  -  total flux cleaned = 0.200238 Jy
! Component: 150  -  total flux cleaned = 0.213315 Jy
! Component: 200  -  total flux cleaned = 0.219488 Jy
! Total flux subtracted in 200 components = 0.219488 Jy
! Clean residual min=-0.007004 max=0.007262 Jy/beam
! Clean residual mean=-0.000004 rms=0.001647 Jy/beam
! Combined flux in latest and established models = 0.219488 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.219488 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.797 mas, bmaj=14.87 mas, bpa=8.254 degrees
! Estimated noise=1751.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27, 44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432387 Jy
! Component: 100  -  total flux cleaned = 0.00498334 Jy
! Component: 150  -  total flux cleaned = 0.00526411 Jy
! Component: 200  -  total flux cleaned = 0.0053771 Jy
! Total flux subtracted in 200 components = 0.0053771 Jy
! Clean residual min=-0.004546 max=0.004575 Jy/beam
! Clean residual mean=0.000005 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.224865 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 57 components and 0.224865 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.346 mas, bmaj=20.58 mas, bpa=-1.71 degrees
! Estimated noise=1996.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672033 Jy
! Component: 100  -  total flux cleaned = 0.000380955 Jy
! Component: 150  -  total flux cleaned = 0.000138153 Jy
! Component: 200  -  total flux cleaned = -0.000188577 Jy
! Total flux subtracted in 200 components = -0.000188577 Jy
! Clean residual min=-0.003292 max=0.004004 Jy/beam
! Clean residual mean=0.000013 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.224676 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250406 Jy
! Component: 100  -  total flux cleaned = -0.000437073 Jy
! Component: 150  -  total flux cleaned = -0.000612363 Jy
! Component: 200  -  total flux cleaned = -0.000815844 Jy
! Total flux subtracted in 200 components = -0.000815844 Jy
! Clean residual min=-0.003209 max=0.003842 Jy/beam
! Clean residual mean=0.000013 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.223861 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 94 components and 0.22386 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.797 mas, bmaj=14.87 mas, bpa=8.254 degrees
! Estimated noise=1751.05 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149487 Jy
! Component: 100  -  total flux cleaned = -0.000477082 Jy
! Component: 150  -  total flux cleaned = -0.000829473 Jy
! Component: 200  -  total flux cleaned = -0.00104707 Jy
! Total flux subtracted in 200 components = -0.00104707 Jy
! Clean residual min=-0.004001 max=0.004054 Jy/beam
! Clean residual mean=0.000007 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.222813 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 119 components and 0.222813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097319Jy  sigma=0.000754
! Fit after  self-cal, rms=0.097273Jy  sigma=0.000754
wmodel J0236-2953_S_2014_06_09_pus_map.mod
! Writing 119 model components to file: J0236-2953_S_2014_06_09_pus_map.mod
wobs J0236-2953_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J0236-2953_S_2014_06_09_pus_uvs.fits
wwins J0236-2953_S_2014_06_09_pus_map.win
! wwins: Wrote 3 windows to J0236-2953_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000742042 Jy
! Component: 100  -  total flux cleaned = -0.00062558 Jy
! Component: 150  -  total flux cleaned = -0.000901672 Jy
! Component: 200  -  total flux cleaned = -0.00100519 Jy
! Component: 250  -  total flux cleaned = -0.00105511 Jy
! Component: 300  -  total flux cleaned = -0.000916073 Jy
! Component: 350  -  total flux cleaned = -0.000827321 Jy
! Component: 400  -  total flux cleaned = -0.00091363 Jy
! Component: 450  -  total flux cleaned = -0.000997543 Jy
! Component: 500  -  total flux cleaned = -0.00103894 Jy
! Component: 550  -  total flux cleaned = -0.00119752 Jy
! Component: 600  -  total flux cleaned = -0.00135232 Jy
! Component: 650  -  total flux cleaned = -0.00142811 Jy
! Component: 700  -  total flux cleaned = -0.00150228 Jy
! Component: 750  -  total flux cleaned = -0.00164715 Jy
! Component: 800  -  total flux cleaned = -0.00175301 Jy
! Component: 850  -  total flux cleaned = -0.00175296 Jy
! Component: 900  -  total flux cleaned = -0.00185501 Jy
! Component: 950  -  total flux cleaned = -0.00185462 Jy
! Component: 1000  -  total flux cleaned = -0.00185335 Jy
! Component: 1050  -  total flux cleaned = -0.00169151 Jy
! Component: 1100  -  total flux cleaned = -0.0016591 Jy
! Component: 1150  -  total flux cleaned = -0.00147171 Jy
! Component: 1200  -  total flux cleaned = -0.00134973 Jy
! Component: 1250  -  total flux cleaned = -0.0012895 Jy
! Component: 1300  -  total flux cleaned = -0.00111099 Jy
! Component: 1350  -  total flux cleaned = -0.00119888 Jy
! Component: 1400  -  total flux cleaned = -0.00102414 Jy
! Component: 1450  -  total flux cleaned = -0.000938102 Jy
! Component: 1500  -  total flux cleaned = -0.000881619 Jy
! Component: 1550  -  total flux cleaned = -0.000881306 Jy
! Component: 1600  -  total flux cleaned = -0.000743606 Jy
! Component: 1650  -  total flux cleaned = -0.000580674 Jy
! Component: 1700  -  total flux cleaned = -0.000553609 Jy
! Component: 1750  -  total flux cleaned = -0.000447065 Jy
! Component: 1800  -  total flux cleaned = -0.000315596 Jy
! Component: 1850  -  total flux cleaned = -0.000185555 Jy
! Component: 1900  -  total flux cleaned = -3.14495e-05 Jy
! Component: 1950  -  total flux cleaned = 4.47217e-05 Jy
! Component: 2000  -  total flux cleaned = 0.000145343 Jy
! Component: 2050  -  total flux cleaned = 0.000269972 Jy
! Component: 2100  -  total flux cleaned = 0.000270043 Jy
! Component: 2150  -  total flux cleaned = 0.00041678 Jy
! Component: 2200  -  total flux cleaned = 0.000489551 Jy
! Component: 2250  -  total flux cleaned = 0.000585327 Jy
! Component: 2300  -  total flux cleaned = 0.000656641 Jy
! Component: 2350  -  total flux cleaned = 0.000797888 Jy
! Component: 2400  -  total flux cleaned = 0.000844482 Jy
! Component: 2450  -  total flux cleaned = 0.000960278 Jy
! Component: 2500  -  total flux cleaned = 0.00112107 Jy
! Component: 2550  -  total flux cleaned = 0.00109845 Jy
! Component: 2600  -  total flux cleaned = 0.00112116 Jy
! Component: 2650  -  total flux cleaned = 0.00121116 Jy
! Component: 2700  -  total flux cleaned = 0.00125591 Jy
! Component: 2750  -  total flux cleaned = 0.00125588 Jy
! Component: 2800  -  total flux cleaned = 0.00129971 Jy
! Component: 2850  -  total flux cleaned = 0.00125597 Jy
! Component: 2900  -  total flux cleaned = 0.00134328 Jy
! Component: 2950  -  total flux cleaned = 0.00138663 Jy
! Component: 3000  -  total flux cleaned = 0.00147277 Jy
! Component: 3050  -  total flux cleaned = 0.00145136 Jy
! Component: 3100  -  total flux cleaned = 0.00155765 Jy
! Component: 3150  -  total flux cleaned = 0.0015154 Jy
! Component: 3200  -  total flux cleaned = 0.00151551 Jy
! Component: 3250  -  total flux cleaned = 0.00157814 Jy
! Component: 3300  -  total flux cleaned = 0.00157808 Jy
! Component: 3350  -  total flux cleaned = 0.00157806 Jy
! Component: 3400  -  total flux cleaned = 0.00170181 Jy
! Component: 3450  -  total flux cleaned = 0.00170169 Jy
! Component: 3500  -  total flux cleaned = 0.0017426 Jy
! Component: 3550  -  total flux cleaned = 0.00176299 Jy
! Component: 3600  -  total flux cleaned = 0.00174273 Jy
! Component: 3650  -  total flux cleaned = 0.00188422 Jy
! Component: 3700  -  total flux cleaned = 0.00184383 Jy
! Component: 3750  -  total flux cleaned = 0.00194437 Jy
! Component: 3800  -  total flux cleaned = 0.00196434 Jy
! Component: 3850  -  total flux cleaned = 0.00200435 Jy
! Component: 3900  -  total flux cleaned = 0.00204431 Jy
! Component: 3950  -  total flux cleaned = 0.00208411 Jy
! Component: 4000  -  total flux cleaned = 0.00208408 Jy
! Component: 4050  -  total flux cleaned = 0.00216353 Jy
! Total flux subtracted in 4096 components = 0.00220305 Jy
! Clean residual min=-0.001069 max=0.001300 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.225016 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 450 components and 0.225017 Jy
![Exited script file: muppet]
wmap "J0236-2953_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.797 x 14.87 at 8.254 degrees (North through East)
! Clean map  min=-0.0043365  max=0.20595 Jy/beam
! Writing clean map to FITS file: J0236-2953_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.20595 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000359614 
device "J0236-2953_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0236-2953_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.523838 0.523838 1.04768 2.09535 4.1907 8.38141 16.7628 33.5256 67.0513
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.205 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.797 x 14.87 at 8.254 degrees (North through East)
! Clean map  min=-0.0043365  max=0.20595 Jy/beam
quit
! Quitting program
! Log file J0236-2953_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:41:54 2016