! Started logfile: J0121+1127_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:40:38 2016 obs J0121+1127_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0121+1127_S_2014_06_09_pus_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613889 visibilities/baseline/integration-bin. ! Found source: J0121+1127 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 13260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0121+1127_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917318Jy sigma=0.010616 ! Fit after self-cal, rms=0.884938Jy sigma=0.010298 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.61 mas, bpa=10.8 degrees ! Estimated noise=814.786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0923967 Jy ! Component: 100 - total flux cleaned = 0.112546 Jy ! Total flux subtracted in 100 components = 0.112546 Jy ! Clean residual min=-0.003537 max=0.005633 Jy/beam ! Clean residual mean=-0.000009 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.112546 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.112546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074555Jy sigma=0.000787 ! Fit after self-cal, rms=0.074548Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.559 mas, bmaj=9.687 mas, bpa=9.878 degrees ! Estimated noise=539.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393648 Jy ! Component: 100 - total flux cleaned = 0.00572302 Jy ! Component: 150 - total flux cleaned = 0.00630379 Jy ! Component: 200 - total flux cleaned = 0.00650376 Jy ! Total flux subtracted in 200 components = 0.00650376 Jy ! Clean residual min=-0.002217 max=0.002098 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.119049 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.119049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074287Jy sigma=0.000785 ! Fit after self-cal, rms=0.074290Jy sigma=0.000785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 0.98 KP 1.08 ! LA 1.21 MK 1.00* NL 0.96 OV 0.97 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.04 KP 1.00 ! LA 1.13 MK 1.00* NL 1.06 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.03 KP 0.94 ! LA 0.88 MK 1.00* NL 0.99 OV 0.94 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.98 KP 0.89 ! LA 0.88 MK 1.00* NL 1.02 OV 1.02 ! PT 1.00 SC 0.94 ! ! ! Fit before self-cal, rms=0.074290Jy sigma=0.000785 ! Fit after self-cal, rms=0.071829Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.552 mas, bmaj=9.698 mas, bpa=9.924 degrees ! Estimated noise=537.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150132 Jy ! Component: 100 - total flux cleaned = -0.000194292 Jy ! Component: 150 - total flux cleaned = -0.000220399 Jy ! Component: 200 - total flux cleaned = -0.000242471 Jy ! Total flux subtracted in 200 components = -0.000242471 Jy ! Clean residual min=-0.001739 max=0.001416 Jy/beam ! Clean residual mean=-0.000004 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.118807 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.118807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071822Jy sigma=0.000773 ! Fit after self-cal, rms=0.071816Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071816Jy sigma=0.000772 ! Fit after self-cal, rms=0.071759Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.553 mas, bmaj=9.699 mas, bpa=10.02 degrees ! Estimated noise=537.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170119 Jy ! Component: 100 - total flux cleaned = -0.000120481 Jy ! Component: 150 - total flux cleaned = -0.000103347 Jy ! Component: 200 - total flux cleaned = -0.000108322 Jy ! Total flux subtracted in 200 components = -0.000108322 Jy ! Clean residual min=-0.001483 max=0.001270 Jy/beam ! Clean residual mean=-0.000004 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.118699 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.118699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071756Jy sigma=0.000771 ! Fit after self-cal, rms=0.071765Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.99448e-08 Jy ! Component: 100 - total flux cleaned = -1.51646e-05 Jy ! Component: 150 - total flux cleaned = -1.94796e-05 Jy ! Component: 200 - total flux cleaned = -2.36883e-05 Jy ! Total flux subtracted in 200 components = -2.36883e-05 Jy ! Clean residual min=-0.001485 max=0.001279 Jy/beam ! Clean residual mean=-0.000004 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.118675 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.118675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071765Jy sigma=0.000771 ! Fit after self-cal, rms=0.071764Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071764Jy sigma=0.000771 ! Fit after self-cal, rms=0.071768Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.55 mas, bmaj=9.701 mas, bpa=10.06 degrees ! Estimated noise=537.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.41537e-05 Jy ! Component: 100 - total flux cleaned = -1.3545e-05 Jy ! Component: 150 - total flux cleaned = -1.35543e-05 Jy ! Component: 200 - total flux cleaned = -1.3457e-05 Jy ! Total flux subtracted in 200 components = -1.3457e-05 Jy ! Clean residual min=-0.001486 max=0.001277 Jy/beam ! Clean residual mean=-0.000004 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.118661 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.118661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071767Jy sigma=0.000771 ! Fit after self-cal, rms=0.071768Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41112e-05 Jy ! Component: 100 - total flux cleaned = -1.05063e-05 Jy ! Component: 150 - total flux cleaned = -7.15286e-06 Jy ! Component: 200 - total flux cleaned = -7.15098e-06 Jy ! Total flux subtracted in 200 components = -7.15098e-06 Jy ! Clean residual min=-0.001489 max=0.001286 Jy/beam ! Clean residual mean=-0.000004 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.118654 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.118654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071768Jy sigma=0.000771 ! Fit after self-cal, rms=0.071768Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071768Jy sigma=0.000771 ! Fit after self-cal, rms=0.071749Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.223 mas, bmaj=13.46 mas, bpa=-9.248 degrees ! Estimated noise=600.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208807 Jy ! Component: 100 - total flux cleaned = 0.000221435 Jy ! Component: 150 - total flux cleaned = 0.00022717 Jy ! Component: 200 - total flux cleaned = 0.000226924 Jy ! Total flux subtracted in 200 components = 0.000226924 Jy ! Clean residual min=-0.001604 max=0.001505 Jy/beam ! Clean residual mean=-0.000008 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.118881 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.118881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071748Jy sigma=0.000771 ! Fit after self-cal, rms=0.071748Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6905e-06 Jy ! Component: 100 - total flux cleaned = 1.92896e-06 Jy ! Component: 150 - total flux cleaned = 2.49136e-06 Jy ! Component: 200 - total flux cleaned = 6.97933e-06 Jy ! Total flux subtracted in 200 components = 6.97933e-06 Jy ! Clean residual min=-0.001604 max=0.001497 Jy/beam ! Clean residual mean=-0.000008 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.118888 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.118888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071748Jy sigma=0.000771 ! Fit after self-cal, rms=0.071748Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.547 mas, bmaj=9.702 mas, bpa=10.1 degrees ! Estimated noise=537.702 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.547 x 9.702 at 10.1 degrees (North through East) ! Clean map min=-0.0014407 max=0.11664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.626 mas, bpa=10.96 degrees ! Estimated noise=801.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909033 Jy ! Component: 100 - total flux cleaned = 0.110735 Jy ! Component: 150 - total flux cleaned = 0.115237 Jy ! Component: 200 - total flux cleaned = 0.116254 Jy ! Total flux subtracted in 200 components = 0.116254 Jy ! Clean residual min=-0.002534 max=0.002295 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.116254 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.116254 Jy ! Inverting map and beam ! Estimated beam: bmin=4.547 mas, bmaj=9.702 mas, bpa=10.1 degrees ! Estimated noise=537.702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016461 Jy ! Component: 100 - total flux cleaned = 0.00241313 Jy ! Component: 150 - total flux cleaned = 0.00256234 Jy ! Component: 200 - total flux cleaned = 0.00265891 Jy ! Total flux subtracted in 200 components = 0.00265891 Jy ! Clean residual min=-0.001462 max=0.001270 Jy/beam ! Clean residual mean=-0.000004 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.118913 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.118913 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.223 mas, bmaj=13.46 mas, bpa=-9.248 degrees ! Estimated noise=600.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148312 Jy ! Component: 100 - total flux cleaned = 0.000132819 Jy ! Component: 150 - total flux cleaned = 0.000112896 Jy ! Component: 200 - total flux cleaned = 9.41922e-05 Jy ! Total flux subtracted in 200 components = 9.41922e-05 Jy ! Clean residual min=-0.001596 max=0.001489 Jy/beam ! Clean residual mean=-0.000007 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.119007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73338e-05 Jy ! Component: 100 - total flux cleaned = -3.35635e-05 Jy ! Component: 150 - total flux cleaned = -4.38818e-05 Jy ! Component: 200 - total flux cleaned = -5.83394e-05 Jy ! Total flux subtracted in 200 components = -5.83394e-05 Jy ! Clean residual min=-0.001599 max=0.001489 Jy/beam ! Clean residual mean=-0.000008 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.118948 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.118948 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.547 mas, bmaj=9.702 mas, bpa=10.1 degrees ! Estimated noise=537.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97211e-05 Jy ! Component: 100 - total flux cleaned = -4.59031e-05 Jy ! Component: 150 - total flux cleaned = -5.23556e-05 Jy ! Component: 200 - total flux cleaned = -6.33939e-05 Jy ! Total flux subtracted in 200 components = -6.33939e-05 Jy ! Clean residual min=-0.001465 max=0.001299 Jy/beam ! Clean residual mean=-0.000004 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.118885 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.118885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071750Jy sigma=0.000771 ! Fit after self-cal, rms=0.071750Jy sigma=0.000771 wmodel J0121+1127_S_2014_06_09_pus_map.mod ! Writing 51 model components to file: J0121+1127_S_2014_06_09_pus_map.mod wobs J0121+1127_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0121+1127_S_2014_06_09_pus_uvs.fits wwins J0121+1127_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J0121+1127_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00053415 Jy ! Component: 100 - total flux cleaned = -0.000606866 Jy ! Component: 150 - total flux cleaned = -0.000473146 Jy ! Component: 200 - total flux cleaned = -0.000387547 Jy ! Component: 250 - total flux cleaned = -0.000325733 Jy ! Component: 300 - total flux cleaned = -0.000247061 Jy ! Component: 350 - total flux cleaned = -0.000171345 Jy ! Component: 400 - total flux cleaned = -7.89185e-05 Jy ! Component: 450 - total flux cleaned = -6.67431e-06 Jy ! Component: 500 - total flux cleaned = 9.90211e-05 Jy ! Component: 550 - total flux cleaned = 0.00016758 Jy ! Component: 600 - total flux cleaned = 0.000234401 Jy ! Component: 650 - total flux cleaned = 0.000283219 Jy ! Component: 700 - total flux cleaned = 0.000379212 Jy ! Component: 750 - total flux cleaned = 0.000425933 Jy ! Component: 800 - total flux cleaned = 0.000518332 Jy ! Component: 850 - total flux cleaned = 0.000593548 Jy ! Component: 900 - total flux cleaned = 0.000697104 Jy ! Component: 950 - total flux cleaned = 0.000798462 Jy ! Component: 1000 - total flux cleaned = 0.000883766 Jy ! Component: 1050 - total flux cleaned = 0.000995443 Jy ! Component: 1100 - total flux cleaned = 0.00106372 Jy ! Component: 1150 - total flux cleaned = 0.00115803 Jy ! Component: 1200 - total flux cleaned = 0.00127718 Jy ! Component: 1250 - total flux cleaned = 0.00135514 Jy ! Component: 1300 - total flux cleaned = 0.00145756 Jy ! Component: 1350 - total flux cleaned = 0.00158387 Jy ! Component: 1400 - total flux cleaned = 0.00167074 Jy ! Component: 1450 - total flux cleaned = 0.00175669 Jy ! Component: 1500 - total flux cleaned = 0.00186563 Jy ! Component: 1550 - total flux cleaned = 0.00196118 Jy ! Component: 1600 - total flux cleaned = 0.0020671 Jy ! Component: 1650 - total flux cleaned = 0.00217163 Jy ! Component: 1700 - total flux cleaned = 0.00229779 Jy ! Component: 1750 - total flux cleaned = 0.00242244 Jy ! Component: 1800 - total flux cleaned = 0.00255684 Jy ! Component: 1850 - total flux cleaned = 0.00266744 Jy ! Component: 1900 - total flux cleaned = 0.00278767 Jy ! Component: 1950 - total flux cleaned = 0.00290645 Jy ! Component: 2000 - total flux cleaned = 0.0029918 Jy ! Component: 2050 - total flux cleaned = 0.00311831 Jy ! Component: 2100 - total flux cleaned = 0.00319125 Jy ! Component: 2150 - total flux cleaned = 0.00332531 Jy ! Component: 2200 - total flux cleaned = 0.0033967 Jy ! Component: 2250 - total flux cleaned = 0.00345738 Jy ! Component: 2300 - total flux cleaned = 0.00356726 Jy ! Component: 2350 - total flux cleaned = 0.00365623 Jy ! Component: 2400 - total flux cleaned = 0.00374408 Jy ! Component: 2450 - total flux cleaned = 0.00383103 Jy ! Component: 2500 - total flux cleaned = 0.00390762 Jy ! Component: 2550 - total flux cleaned = 0.0040025 Jy ! Component: 2600 - total flux cleaned = 0.0040494 Jy ! Component: 2650 - total flux cleaned = 0.00412391 Jy ! Component: 2700 - total flux cleaned = 0.00420694 Jy ! Component: 2750 - total flux cleaned = 0.0042618 Jy ! Component: 2800 - total flux cleaned = 0.00433429 Jy ! Component: 2850 - total flux cleaned = 0.00440597 Jy ! Component: 2900 - total flux cleaned = 0.00447693 Jy ! Component: 2950 - total flux cleaned = 0.00452969 Jy ! Component: 3000 - total flux cleaned = 0.00457326 Jy ! Component: 3050 - total flux cleaned = 0.0046165 Jy ! Component: 3100 - total flux cleaned = 0.0046852 Jy ! Component: 3150 - total flux cleaned = 0.00472775 Jy ! Component: 3200 - total flux cleaned = 0.00477845 Jy ! Component: 3250 - total flux cleaned = 0.00482032 Jy ! Component: 3300 - total flux cleaned = 0.00487856 Jy ! Component: 3350 - total flux cleaned = 0.00490331 Jy ! Component: 3400 - total flux cleaned = 0.00493606 Jy ! Component: 3450 - total flux cleaned = 0.00498475 Jy ! Component: 3500 - total flux cleaned = 0.00502498 Jy ! Component: 3550 - total flux cleaned = 0.00504897 Jy ! Component: 3600 - total flux cleaned = 0.00508872 Jy ! Component: 3650 - total flux cleaned = 0.00514403 Jy ! Component: 3700 - total flux cleaned = 0.00515971 Jy ! Component: 3750 - total flux cleaned = 0.00522206 Jy ! Component: 3800 - total flux cleaned = 0.00524528 Jy ! Component: 3850 - total flux cleaned = 0.00529138 Jy ! Component: 3900 - total flux cleaned = 0.00532195 Jy ! Component: 3950 - total flux cleaned = 0.00538262 Jy ! Component: 4000 - total flux cleaned = 0.00540525 Jy ! Component: 4050 - total flux cleaned = 0.00545027 Jy ! Total flux subtracted in 4096 components = 0.00547261 Jy ! Clean residual min=-0.000490 max=0.000461 Jy/beam ! Clean residual mean=0.000002 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.124358 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 309 components and 0.124358 Jy ![Exited script file: muppet] wmap "J0121+1127_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.547 x 9.702 at 10.1 degrees (North through East) ! Clean map min=-0.00093256 max=0.11663 Jy/beam ! Writing clean map to FITS file: J0121+1127_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000133802 device "J0121+1127_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0121+1127_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.344179 0.344179 0.688358 1.37672 2.75343 5.50687 11.0137 22.0275 44.0549 88.1099 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.547 x 9.702 at 10.1 degrees (North through East) ! Clean map min=-0.00093256 max=0.11663 Jy/beam quit ! Quitting program ! Log file J0121+1127_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:40:42 2016