! Started logfile: J0010-2157_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:39:36 2016 obs J0010-2157_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0010-2157_S_2014_06_09_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.597119 visibilities/baseline/integration-bin. ! Found source: J0010-2157 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 5804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010-2157_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.811107Jy sigma=0.007792 ! Fit after self-cal, rms=0.789412Jy sigma=0.007591 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=12.15 mas, bpa=15.5 degrees ! Estimated noise=1402.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165358 Jy ! Component: 100 - total flux cleaned = 0.201784 Jy ! Total flux subtracted in 100 components = 0.201784 Jy ! Clean residual min=-0.008076 max=0.011827 Jy/beam ! Clean residual mean=-0.000052 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.201784 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.201784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094805Jy sigma=0.000856 ! Fit after self-cal, rms=0.094778Jy sigma=0.000855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=13.52 mas, bpa=13.91 degrees ! Estimated noise=981.905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170674 Jy ! Component: 100 - total flux cleaned = 0.0255611 Jy ! Component: 150 - total flux cleaned = 0.0302557 Jy ! Component: 200 - total flux cleaned = 0.0330847 Jy ! Total flux subtracted in 200 components = 0.0330847 Jy ! Clean residual min=-0.007376 max=0.008307 Jy/beam ! Clean residual mean=-0.000053 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.234869 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 59 components and 0.234869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091769Jy sigma=0.000827 ! Fit after self-cal, rms=0.091775Jy sigma=0.000827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.01 KP 1.07 ! LA 1.20 MK 1.00* NL 0.97 OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.08 KP 1.04 ! LA 1.12 MK 1.00* NL 1.01 OV 1.00 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.05 KP 0.92 ! LA 0.89 MK 1.00* NL 0.98 OV 0.92 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.89 ! LA 0.84 MK 1.00* NL 1.05 OV 1.00 ! PT 0.97 SC 0.98 ! ! ! Fit before self-cal, rms=0.091775Jy sigma=0.000827 ! Fit after self-cal, rms=0.088024Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=13.64 mas, bpa=13.96 degrees ! Estimated noise=977.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185651 Jy ! Component: 100 - total flux cleaned = -0.00200898 Jy ! Component: 150 - total flux cleaned = -0.00192341 Jy ! Component: 200 - total flux cleaned = -0.00188638 Jy ! Total flux subtracted in 200 components = -0.00188638 Jy ! Clean residual min=-0.005371 max=0.008205 Jy/beam ! Clean residual mean=-0.000042 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.232982 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.232982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087953Jy sigma=0.000792 ! Fit after self-cal, rms=0.087973Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087973Jy sigma=0.000792 ! Fit after self-cal, rms=0.088138Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=13.67 mas, bpa=13.97 degrees ! Estimated noise=976.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116743 Jy ! Component: 100 - total flux cleaned = -0.00135724 Jy ! Component: 150 - total flux cleaned = -0.00132554 Jy ! Component: 200 - total flux cleaned = -0.00129666 Jy ! Total flux subtracted in 200 components = -0.00129666 Jy ! Clean residual min=-0.005196 max=0.008141 Jy/beam ! Clean residual mean=-0.000041 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.231685 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.231685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088103Jy sigma=0.000790 ! Fit after self-cal, rms=0.088104Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756106 Jy ! Component: 100 - total flux cleaned = 0.0118488 Jy ! Component: 150 - total flux cleaned = 0.0146629 Jy ! Component: 200 - total flux cleaned = 0.0167744 Jy ! Total flux subtracted in 200 components = 0.0167744 Jy ! Clean residual min=-0.004460 max=0.004058 Jy/beam ! Clean residual mean=-0.000028 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.24846 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 133 components and 0.24846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087476Jy sigma=0.000782 ! Fit after self-cal, rms=0.087446Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087446Jy sigma=0.000782 ! Fit after self-cal, rms=0.087545Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=13.73 mas, bpa=13.98 degrees ! Estimated noise=971.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234007 Jy ! Component: 100 - total flux cleaned = 0.00392177 Jy ! Component: 150 - total flux cleaned = 0.00509804 Jy ! Component: 200 - total flux cleaned = 0.00593562 Jy ! Total flux subtracted in 200 components = 0.00593562 Jy ! Clean residual min=-0.003842 max=0.003734 Jy/beam ! Clean residual mean=-0.000020 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.254396 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 166 components and 0.254395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087473Jy sigma=0.000780 ! Fit after self-cal, rms=0.087481Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062115 Jy ! Component: 100 - total flux cleaned = 0.000914398 Jy ! Component: 150 - total flux cleaned = 0.00112736 Jy ! Component: 200 - total flux cleaned = 0.00123647 Jy ! Total flux subtracted in 200 components = 0.00123647 Jy ! Clean residual min=-0.003799 max=0.003652 Jy/beam ! Clean residual mean=-0.000019 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.255632 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 184 components and 0.255632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087467Jy sigma=0.000780 ! Fit after self-cal, rms=0.087464Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087464Jy sigma=0.000780 ! Fit after self-cal, rms=0.087445Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=22.16 mas, bpa=0.4882 degrees ! Estimated noise=1082.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121657 Jy ! Component: 100 - total flux cleaned = 0.00169085 Jy ! Component: 150 - total flux cleaned = 0.00185625 Jy ! Component: 200 - total flux cleaned = 0.00197731 Jy ! Total flux subtracted in 200 components = 0.00197731 Jy ! Clean residual min=-0.004107 max=0.004174 Jy/beam ! Clean residual mean=-0.000035 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.257609 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 217 components and 0.257609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087441Jy sigma=0.000780 ! Fit after self-cal, rms=0.087439Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102564 Jy ! Component: 100 - total flux cleaned = 0.000242546 Jy ! Component: 150 - total flux cleaned = 0.000352631 Jy ! Component: 200 - total flux cleaned = 0.000479099 Jy ! Total flux subtracted in 200 components = 0.000479099 Jy ! Clean residual min=-0.004082 max=0.004072 Jy/beam ! Clean residual mean=-0.000034 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.258088 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 231 components and 0.258088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087436Jy sigma=0.000780 ! Fit after self-cal, rms=0.087435Jy sigma=0.000780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=13.74 mas, bpa=13.99 degrees ! Estimated noise=969.842 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 13.74 at 13.99 degrees (North through East) ! Clean map min=-0.0036463 max=0.20554 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=12.31 mas, bpa=15.54 degrees ! Estimated noise=1389.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163694 Jy ! Component: 100 - total flux cleaned = 0.199618 Jy ! Component: 150 - total flux cleaned = 0.211295 Jy ! Component: 200 - total flux cleaned = 0.21865 Jy ! Total flux subtracted in 200 components = 0.21865 Jy ! Clean residual min=-0.005748 max=0.006023 Jy/beam ! Clean residual mean=-0.000036 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.21865 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.21865 Jy ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=13.74 mas, bpa=13.99 degrees ! Estimated noise=969.842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771505 Jy ! Component: 100 - total flux cleaned = 0.013467 Jy ! Component: 150 - total flux cleaned = 0.0179996 Jy ! Component: 200 - total flux cleaned = 0.0216154 Jy ! Total flux subtracted in 200 components = 0.0216154 Jy ! Clean residual min=-0.004077 max=0.004334 Jy/beam ! Clean residual mean=-0.000035 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.240265 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 76 components and 0.240265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=22.16 mas, bpa=0.4882 degrees ! Estimated noise=1082.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425512 Jy ! Component: 100 - total flux cleaned = 0.00732579 Jy ! Component: 150 - total flux cleaned = 0.00973028 Jy ! Component: 200 - total flux cleaned = 0.0116438 Jy ! Total flux subtracted in 200 components = 0.0116438 Jy ! Clean residual min=-0.004133 max=0.004261 Jy/beam ! Clean residual mean=-0.000042 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.251909 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015483 Jy ! Component: 100 - total flux cleaned = 0.00280993 Jy ! Component: 150 - total flux cleaned = 0.00372633 Jy ! Component: 200 - total flux cleaned = 0.0042565 Jy ! Total flux subtracted in 200 components = 0.0042565 Jy ! Clean residual min=-0.004071 max=0.004016 Jy/beam ! Clean residual mean=-0.000036 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.256165 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 134 components and 0.256165 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=13.74 mas, bpa=13.99 degrees ! Estimated noise=969.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346338 Jy ! Component: 100 - total flux cleaned = -0.000299802 Jy ! Component: 150 - total flux cleaned = -0.00038907 Jy ! Component: 200 - total flux cleaned = -0.000391506 Jy ! Total flux subtracted in 200 components = -0.000391506 Jy ! Clean residual min=-0.003454 max=0.003464 Jy/beam ! Clean residual mean=-0.000022 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.255774 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 151 components and 0.255774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087468Jy sigma=0.000780 ! Fit after self-cal, rms=0.087451Jy sigma=0.000780 wmodel J0010-2157_S_2014_06_09_pus_map.mod ! Writing 151 model components to file: J0010-2157_S_2014_06_09_pus_map.mod wobs J0010-2157_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0010-2157_S_2014_06_09_pus_uvs.fits wwins J0010-2157_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0010-2157_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061844 Jy ! Component: 100 - total flux cleaned = 0.00134973 Jy ! Component: 150 - total flux cleaned = 0.00213791 Jy ! Component: 200 - total flux cleaned = 0.00248382 Jy ! Component: 250 - total flux cleaned = 0.00285872 Jy ! Component: 300 - total flux cleaned = 0.00317133 Jy ! Component: 350 - total flux cleaned = 0.00338493 Jy ! Component: 400 - total flux cleaned = 0.00354938 Jy ! Component: 450 - total flux cleaned = 0.00370783 Jy ! Component: 500 - total flux cleaned = 0.00374546 Jy ! Component: 550 - total flux cleaned = 0.00374717 Jy ! Component: 600 - total flux cleaned = 0.00378395 Jy ! Component: 650 - total flux cleaned = 0.00374792 Jy ! Component: 700 - total flux cleaned = 0.00374675 Jy ! Component: 750 - total flux cleaned = 0.00371287 Jy ! Component: 800 - total flux cleaned = 0.00371246 Jy ! Component: 850 - total flux cleaned = 0.00358492 Jy ! Component: 900 - total flux cleaned = 0.00355332 Jy ! Component: 950 - total flux cleaned = 0.00352277 Jy ! Component: 1000 - total flux cleaned = 0.00346321 Jy ! Component: 1050 - total flux cleaned = 0.00346324 Jy ! Component: 1100 - total flux cleaned = 0.00340608 Jy ! Component: 1150 - total flux cleaned = 0.00346149 Jy ! Component: 1200 - total flux cleaned = 0.00351615 Jy ! Component: 1250 - total flux cleaned = 0.00351621 Jy ! Component: 1300 - total flux cleaned = 0.00362173 Jy ! Component: 1350 - total flux cleaned = 0.00367343 Jy ! Component: 1400 - total flux cleaned = 0.00367386 Jy ! Component: 1450 - total flux cleaned = 0.00379882 Jy ! Component: 1500 - total flux cleaned = 0.00394568 Jy ! Component: 1550 - total flux cleaned = 0.00404251 Jy ! Component: 1600 - total flux cleaned = 0.00411377 Jy ! Component: 1650 - total flux cleaned = 0.00430102 Jy ! Component: 1700 - total flux cleaned = 0.00439292 Jy ! Component: 1750 - total flux cleaned = 0.00448321 Jy ! Component: 1800 - total flux cleaned = 0.00452816 Jy ! Component: 1850 - total flux cleaned = 0.00466024 Jy ! Component: 1900 - total flux cleaned = 0.00463873 Jy ! Component: 1950 - total flux cleaned = 0.00474603 Jy ! Component: 2000 - total flux cleaned = 0.00487253 Jy ! Component: 2050 - total flux cleaned = 0.00489334 Jy ! Component: 2100 - total flux cleaned = 0.00497588 Jy ! Component: 2150 - total flux cleaned = 0.00503703 Jy ! Component: 2200 - total flux cleaned = 0.00509701 Jy ! Component: 2250 - total flux cleaned = 0.00505769 Jy ! Component: 2300 - total flux cleaned = 0.00507752 Jy ! Component: 2350 - total flux cleaned = 0.00513546 Jy ! Component: 2400 - total flux cleaned = 0.00523025 Jy ! Component: 2450 - total flux cleaned = 0.00523002 Jy ! Component: 2500 - total flux cleaned = 0.00530401 Jy ! Component: 2550 - total flux cleaned = 0.00528573 Jy ! Component: 2600 - total flux cleaned = 0.00534033 Jy ! Component: 2650 - total flux cleaned = 0.00537614 Jy ! Component: 2700 - total flux cleaned = 0.00541165 Jy ! Component: 2750 - total flux cleaned = 0.00539443 Jy ! Component: 2800 - total flux cleaned = 0.00544656 Jy ! Component: 2850 - total flux cleaned = 0.00548105 Jy ! Component: 2900 - total flux cleaned = 0.00551499 Jy ! Component: 2950 - total flux cleaned = 0.00551503 Jy ! Component: 3000 - total flux cleaned = 0.00556474 Jy ! Component: 3050 - total flux cleaned = 0.00558107 Jy ! Component: 3100 - total flux cleaned = 0.00559726 Jy ! Component: 3150 - total flux cleaned = 0.00558134 Jy ! Component: 3200 - total flux cleaned = 0.00562955 Jy ! Component: 3250 - total flux cleaned = 0.00570836 Jy ! Component: 3300 - total flux cleaned = 0.00573985 Jy ! Component: 3350 - total flux cleaned = 0.00581773 Jy ! Component: 3400 - total flux cleaned = 0.00583309 Jy ! Component: 3450 - total flux cleaned = 0.00590952 Jy ! Component: 3500 - total flux cleaned = 0.00598524 Jy ! Component: 3550 - total flux cleaned = 0.00607543 Jy ! Component: 3600 - total flux cleaned = 0.00616502 Jy ! Component: 3650 - total flux cleaned = 0.0062391 Jy ! Component: 3700 - total flux cleaned = 0.00638599 Jy ! Component: 3750 - total flux cleaned = 0.00650252 Jy ! Component: 3800 - total flux cleaned = 0.0065456 Jy ! Component: 3850 - total flux cleaned = 0.00661732 Jy ! Component: 3900 - total flux cleaned = 0.00668866 Jy ! Component: 3950 - total flux cleaned = 0.00675946 Jy ! Component: 4000 - total flux cleaned = 0.00681584 Jy ! Component: 4050 - total flux cleaned = 0.00688565 Jy ! Total flux subtracted in 4096 components = 0.00694107 Jy ! Clean residual min=-0.000854 max=0.000809 Jy/beam ! Clean residual mean=0.000003 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.262715 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 458 components and 0.262715 Jy ![Exited script file: muppet] wmap "J0010-2157_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 13.74 at 13.99 degrees (North through East) ! Clean map min=-0.0017199 max=0.20662 Jy/beam ! Writing clean map to FITS file: J0010-2157_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206625 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000267793 device "J0010-2157_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0010-2157_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.388811 0.388811 0.777621 1.55524 3.11048 6.22097 12.4419 24.8839 49.7678 99.5355 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.961 x 13.74 at 13.99 degrees (North through East) ! Clean map min=-0.0017199 max=0.20662 Jy/beam quit ! Quitting program ! Log file J0010-2157_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:39:40 2016