! Started logfile: J0008-2559_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:39:27 2016
obs J0008-2559_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J0008-2559_S_2014_06_09_pus_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.592063 visibilities/baseline/integration-bin.
! Found source: J0008-2559
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 5968 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0008-2559_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 125 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 125 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 125 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 125 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.941439Jy  sigma=0.008461
! Fit after  self-cal, rms=0.898081Jy  sigma=0.008162
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.113 mas, bmaj=12.74 mas, bpa=16.56 degrees
! Estimated noise=1443.41 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.080043 Jy
! Component: 100  -  total flux cleaned = 0.0996904 Jy
! Total flux subtracted in 100 components = 0.0996904 Jy
! Clean residual min=-0.006045 max=0.008661 Jy/beam
! Clean residual mean=-0.000029 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.0996904 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0996904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097687Jy  sigma=0.000798
! Fit after  self-cal, rms=0.097672Jy  sigma=0.000798
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.95 mas, bmaj=14.47 mas, bpa=14.81 degrees
! Estimated noise=1026.59 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139689 Jy
! Component: 100  -  total flux cleaned = 0.0210818 Jy
! Component: 150  -  total flux cleaned = 0.0251416 Jy
! Component: 200  -  total flux cleaned = 0.0275399 Jy
! Total flux subtracted in 200 components = 0.0275399 Jy
! Clean residual min=-0.004097 max=0.004203 Jy/beam
! Clean residual mean=0.000008 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.12723 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 56 components and 0.12723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095937Jy  sigma=0.000777
! Fit after  self-cal, rms=0.095943Jy  sigma=0.000777
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.82     HN        1.12     KP        0.99     
!   LA        1.15     MK        1.00*    NL        0.99     OV        0.99     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.08     KP        1.00     
!   LA        1.10     MK        1.00*    NL        1.05     OV        0.99     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.11     HN        1.12     KP        0.95     
!   LA        0.92     MK        1.00*    NL        0.94     OV        0.94     
!   PT        0.91     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        0.96     KP        0.92     
!   LA        0.93     MK        1.00*    NL        1.05     OV        0.93     
!   PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.095943Jy  sigma=0.000777
! Fit after  self-cal, rms=0.095963Jy  sigma=0.000770
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=14.65 mas, bpa=14.89 degrees
! Estimated noise=1020.83 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119907 Jy
! Component: 100  -  total flux cleaned = -0.00112731 Jy
! Component: 150  -  total flux cleaned = -0.00109748 Jy
! Component: 200  -  total flux cleaned = -0.00104727 Jy
! Total flux subtracted in 200 components = -0.00104727 Jy
! Clean residual min=-0.003441 max=0.004166 Jy/beam
! Clean residual mean=0.000000 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.126183 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 62 components and 0.126183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095927Jy  sigma=0.000770
! Fit after  self-cal, rms=0.095960Jy  sigma=0.000769
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095960Jy  sigma=0.000769
! Fit after  self-cal, rms=0.096735Jy  sigma=0.000768
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.971 mas, bmaj=14.66 mas, bpa=14.85 degrees
! Estimated noise=1020.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000441414 Jy
! Component: 100  -  total flux cleaned = -0.000442 Jy
! Component: 150  -  total flux cleaned = -0.000423221 Jy
! Component: 200  -  total flux cleaned = -0.000406506 Jy
! Total flux subtracted in 200 components = -0.000406506 Jy
! Clean residual min=-0.003233 max=0.004138 Jy/beam
! Clean residual mean=0.000003 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.125777 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 68 components and 0.125777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096726Jy  sigma=0.000768
! Fit after  self-cal, rms=0.096744Jy  sigma=0.000768
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (57, 34).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363235 Jy
! Component: 100  -  total flux cleaned = 0.0046125 Jy
! Component: 150  -  total flux cleaned = 0.00479055 Jy
! Component: 200  -  total flux cleaned = 0.00478831 Jy
! Total flux subtracted in 200 components = 0.00478831 Jy
! Clean residual min=-0.002863 max=0.003404 Jy/beam
! Clean residual mean=-0.000004 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.130565 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.130565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096574Jy  sigma=0.000766
! Fit after  self-cal, rms=0.096569Jy  sigma=0.000766
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096569Jy  sigma=0.000766
! Fit after  self-cal, rms=0.097198Jy  sigma=0.000766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.973 mas, bmaj=14.64 mas, bpa=14.86 degrees
! Estimated noise=1015.69 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132829 Jy
! Component: 100  -  total flux cleaned = 0.00146381 Jy
! Component: 150  -  total flux cleaned = 0.00146432 Jy
! Component: 200  -  total flux cleaned = 0.00142716 Jy
! Total flux subtracted in 200 components = 0.00142716 Jy
! Clean residual min=-0.002731 max=0.002950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.131992 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 115 components and 0.131992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097152Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097182Jy  sigma=0.000765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229738 Jy
! Component: 100  -  total flux cleaned = 0.000198687 Jy
! Component: 150  -  total flux cleaned = 0.000139007 Jy
! Component: 200  -  total flux cleaned = 8.13479e-05 Jy
! Total flux subtracted in 200 components = 8.13479e-05 Jy
! Clean residual min=-0.002750 max=0.002955 Jy/beam
! Clean residual mean=-0.000002 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.132073 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 125 components and 0.132073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097161Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097160Jy  sigma=0.000765
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097160Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097263Jy  sigma=0.000765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.007 mas, bmaj=24.03 mas, bpa=1.896 degrees
! Estimated noise=1115.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231183 Jy
! Component: 100  -  total flux cleaned = -0.000281944 Jy
! Component: 150  -  total flux cleaned = -0.00036789 Jy
! Component: 200  -  total flux cleaned = -0.000426671 Jy
! Total flux subtracted in 200 components = -0.000426671 Jy
! Clean residual min=-0.002935 max=0.003019 Jy/beam
! Clean residual mean=-0.000001 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.131647 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 142 components and 0.131647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097258Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097263Jy  sigma=0.000765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.08939e-05 Jy
! Component: 100  -  total flux cleaned = -0.000145617 Jy
! Component: 150  -  total flux cleaned = -0.000213339 Jy
! Component: 200  -  total flux cleaned = -0.000275947 Jy
! Total flux subtracted in 200 components = -0.000275947 Jy
! Clean residual min=-0.002921 max=0.002987 Jy/beam
! Clean residual mean=-0.000001 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.131371 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 153 components and 0.131371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097260Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097258Jy  sigma=0.000765
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.973 mas, bmaj=14.65 mas, bpa=14.88 degrees
! Estimated noise=1014.78 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.973 x 14.65 at 14.88 degrees (North through East)
! Clean map  min=-0.0026159  max=0.10278 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.109 mas, bmaj=12.87 mas, bpa=16.6 degrees
! Estimated noise=1428.83 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0788038 Jy
! Component: 100  -  total flux cleaned = 0.0984702 Jy
! Component: 150  -  total flux cleaned = 0.108307 Jy
! Component: 200  -  total flux cleaned = 0.114543 Jy
! Total flux subtracted in 200 components = 0.114543 Jy
! Clean residual min=-0.004127 max=0.004175 Jy/beam
! Clean residual mean=-0.000011 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.114543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.114543 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.973 mas, bmaj=14.65 mas, bpa=14.88 degrees
! Estimated noise=1014.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559711 Jy
! Component: 100  -  total flux cleaned = 0.00904694 Jy
! Component: 150  -  total flux cleaned = 0.0115064 Jy
! Component: 200  -  total flux cleaned = 0.012929 Jy
! Total flux subtracted in 200 components = 0.012929 Jy
! Clean residual min=-0.002898 max=0.003038 Jy/beam
! Clean residual mean=-0.000009 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.127472 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 54 components and 0.127472 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.007 mas, bmaj=24.03 mas, bpa=1.896 degrees
! Estimated noise=1115.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106168 Jy
! Component: 100  -  total flux cleaned = 0.00139897 Jy
! Component: 150  -  total flux cleaned = 0.0016782 Jy
! Component: 200  -  total flux cleaned = 0.00194339 Jy
! Total flux subtracted in 200 components = 0.00194339 Jy
! Clean residual min=-0.003040 max=0.003034 Jy/beam
! Clean residual mean=-0.000004 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.129416 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127118 Jy
! Component: 100  -  total flux cleaned = 0.000235132 Jy
! Component: 150  -  total flux cleaned = 0.000258971 Jy
! Component: 200  -  total flux cleaned = 0.000305118 Jy
! Total flux subtracted in 200 components = 0.000305118 Jy
! Clean residual min=-0.002988 max=0.002973 Jy/beam
! Clean residual mean=-0.000002 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.129721 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 99 components and 0.129721 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.973 mas, bmaj=14.65 mas, bpa=14.88 degrees
! Estimated noise=1014.78 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000171835 Jy
! Component: 100  -  total flux cleaned = 0.000217887 Jy
! Component: 150  -  total flux cleaned = 0.000305732 Jy
! Component: 200  -  total flux cleaned = 0.000306921 Jy
! Total flux subtracted in 200 components = 0.000306921 Jy
! Clean residual min=-0.002754 max=0.002855 Jy/beam
! Clean residual mean=-0.000000 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.130028 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 0.130028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097286Jy  sigma=0.000765
! Fit after  self-cal, rms=0.097272Jy  sigma=0.000765
wmodel J0008-2559_S_2014_06_09_pus_map.mod
! Writing 113 model components to file: J0008-2559_S_2014_06_09_pus_map.mod
wobs J0008-2559_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J0008-2559_S_2014_06_09_pus_uvs.fits
wwins J0008-2559_S_2014_06_09_pus_map.win
! wwins: Wrote 2 windows to J0008-2559_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000442023 Jy
! Component: 100  -  total flux cleaned = 0.000396172 Jy
! Component: 150  -  total flux cleaned = 0.000484411 Jy
! Component: 200  -  total flux cleaned = 0.000737317 Jy
! Component: 250  -  total flux cleaned = 0.000939988 Jy
! Component: 300  -  total flux cleaned = 0.00109576 Jy
! Component: 350  -  total flux cleaned = 0.00102052 Jy
! Component: 400  -  total flux cleaned = 0.00105656 Jy
! Component: 450  -  total flux cleaned = 0.00102058 Jy
! Component: 500  -  total flux cleaned = 0.00105526 Jy
! Component: 550  -  total flux cleaned = 0.00102149 Jy
! Component: 600  -  total flux cleaned = 0.000956537 Jy
! Component: 650  -  total flux cleaned = 0.000925332 Jy
! Component: 700  -  total flux cleaned = 0.000956248 Jy
! Component: 750  -  total flux cleaned = 0.000925743 Jy
! Component: 800  -  total flux cleaned = 0.000926388 Jy
! Component: 850  -  total flux cleaned = 0.00104304 Jy
! Component: 900  -  total flux cleaned = 0.000955701 Jy
! Component: 950  -  total flux cleaned = 0.000927693 Jy
! Component: 1000  -  total flux cleaned = 0.00101113 Jy
! Component: 1050  -  total flux cleaned = 0.00103792 Jy
! Component: 1100  -  total flux cleaned = 0.0010643 Jy
! Component: 1150  -  total flux cleaned = 0.000985509 Jy
! Component: 1200  -  total flux cleaned = 0.0010115 Jy
! Component: 1250  -  total flux cleaned = 0.000960357 Jy
! Component: 1300  -  total flux cleaned = 0.000910759 Jy
! Component: 1350  -  total flux cleaned = 0.00083744 Jy
! Component: 1400  -  total flux cleaned = 0.000885575 Jy
! Component: 1450  -  total flux cleaned = 0.000766874 Jy
! Component: 1500  -  total flux cleaned = 0.000790338 Jy
! Component: 1550  -  total flux cleaned = 0.000767128 Jy
! Component: 1600  -  total flux cleaned = 0.000790001 Jy
! Component: 1650  -  total flux cleaned = 0.000699602 Jy
! Component: 1700  -  total flux cleaned = 0.000700014 Jy
! Component: 1750  -  total flux cleaned = 0.000678283 Jy
! Component: 1800  -  total flux cleaned = 0.00070015 Jy
! Component: 1850  -  total flux cleaned = 0.000678565 Jy
! Component: 1900  -  total flux cleaned = 0.000678634 Jy
! Component: 1950  -  total flux cleaned = 0.000699492 Jy
! Component: 2000  -  total flux cleaned = 0.000658289 Jy
! Component: 2050  -  total flux cleaned = 0.000658515 Jy
! Component: 2100  -  total flux cleaned = 0.000678872 Jy
! Component: 2150  -  total flux cleaned = 0.000678818 Jy
! Component: 2200  -  total flux cleaned = 0.000678811 Jy
! Component: 2250  -  total flux cleaned = 0.000757062 Jy
! Component: 2300  -  total flux cleaned = 0.000718184 Jy
! Component: 2350  -  total flux cleaned = 0.000699322 Jy
! Component: 2400  -  total flux cleaned = 0.000775292 Jy
! Component: 2450  -  total flux cleaned = 0.00081243 Jy
! Component: 2500  -  total flux cleaned = 0.000756702 Jy
! Component: 2550  -  total flux cleaned = 0.000775338 Jy
! Component: 2600  -  total flux cleaned = 0.000739151 Jy
! Component: 2650  -  total flux cleaned = 0.000811346 Jy
! Component: 2700  -  total flux cleaned = 0.000811177 Jy
! Component: 2750  -  total flux cleaned = 0.000775829 Jy
! Component: 2800  -  total flux cleaned = 0.000828284 Jy
! Component: 2850  -  total flux cleaned = 0.000810947 Jy
! Component: 2900  -  total flux cleaned = 0.000828022 Jy
! Component: 2950  -  total flux cleaned = 0.000844759 Jy
! Component: 3000  -  total flux cleaned = 0.000794417 Jy
! Component: 3050  -  total flux cleaned = 0.000894588 Jy
! Component: 3100  -  total flux cleaned = 0.0008946 Jy
! Component: 3150  -  total flux cleaned = 0.000861847 Jy
! Component: 3200  -  total flux cleaned = 0.000894403 Jy
! Component: 3250  -  total flux cleaned = 0.000910615 Jy
! Component: 3300  -  total flux cleaned = 0.000942527 Jy
! Component: 3350  -  total flux cleaned = 0.000990075 Jy
! Component: 3400  -  total flux cleaned = 0.000958485 Jy
! Component: 3450  -  total flux cleaned = 0.00105221 Jy
! Component: 3500  -  total flux cleaned = 0.00108307 Jy
! Component: 3550  -  total flux cleaned = 0.00103681 Jy
! Component: 3600  -  total flux cleaned = 0.00103676 Jy
! Component: 3650  -  total flux cleaned = 0.00106719 Jy
! Component: 3700  -  total flux cleaned = 0.0010219 Jy
! Component: 3750  -  total flux cleaned = 0.000977014 Jy
! Component: 3800  -  total flux cleaned = 0.00106655 Jy
! Component: 3850  -  total flux cleaned = 0.0010369 Jy
! Component: 3900  -  total flux cleaned = 0.00103698 Jy
! Component: 3950  -  total flux cleaned = 0.00102224 Jy
! Component: 4000  -  total flux cleaned = 0.00100764 Jy
! Component: 4050  -  total flux cleaned = 0.000949774 Jy
! Total flux subtracted in 4096 components = 0.000964116 Jy
! Clean residual min=-0.000717 max=0.000869 Jy/beam
! Clean residual mean=0.000006 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.130992 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 372 components and 0.130992 Jy
![Exited script file: muppet]
wmap "J0008-2559_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.973 x 14.65 at 14.88 degrees (North through East)
! Clean map  min=-0.002037  max=0.1035 Jy/beam
! Writing clean map to FITS file: J0008-2559_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.103505 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000276658 
device "J0008-2559_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0008-2559_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.801867 0.801867 1.60373 3.20747 6.41494 12.8299 25.6598 51.3195
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.103 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.973 x 14.65 at 14.88 degrees (North through East)
! Clean map  min=-0.002037  max=0.1035 Jy/beam
quit
! Quitting program
! Log file J0008-2559_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:39:31 2016