! Started logfile: J0006-2955_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:39:22 2016
obs J0006-2955_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J0006-2955_S_2014_06_09_pus_uva.fits
! AN table 1: 112 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.531746 visibilities/baseline/integration-bin.
! Found source: J0006-2955
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 10720 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0006-2955_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 291 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 291 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 291 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 291 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.944485Jy  sigma=0.008080
! Fit after  self-cal, rms=0.884591Jy  sigma=0.007631
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.478 mas, bmaj=12.76 mas, bpa=17.53 degrees
! Estimated noise=1335.56 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0962114 Jy
! Component: 100  -  total flux cleaned = 0.120897 Jy
! Total flux subtracted in 100 components = 0.120897 Jy
! Clean residual min=-0.005653 max=0.009986 Jy/beam
! Clean residual mean=-0.000011 rms=0.001768 Jy/beam
! Combined flux in latest and established models = 0.120897 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.120897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105317Jy  sigma=0.000791
! Fit after  self-cal, rms=0.105270Jy  sigma=0.000791
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.563 mas, bmaj=15.3 mas, bpa=14.36 degrees
! Estimated noise=810.796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103765 Jy
! Component: 100  -  total flux cleaned = 0.0153373 Jy
! Component: 150  -  total flux cleaned = 0.0177564 Jy
! Component: 200  -  total flux cleaned = 0.0184742 Jy
! Total flux subtracted in 200 components = 0.0184742 Jy
! Clean residual min=-0.003737 max=0.003598 Jy/beam
! Clean residual mean=0.000042 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.139372 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 30 components and 0.139372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104372Jy  sigma=0.000782
! Fit after  self-cal, rms=0.104336Jy  sigma=0.000782
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.83     HN        1.00     KP        1.06     
!   LA        1.18     MK        1.00*    NL        1.00     OV        0.93     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.98     HN        1.11     KP        1.01     
!   LA        1.15     MK        1.00*    NL        1.06     OV        0.97     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     HN        1.13     KP        0.91     
!   LA        0.94     MK        1.00*    NL        1.02     OV        0.87     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        1.06     KP        0.93     
!   LA        0.86     MK        1.00*    NL        1.03     OV        0.94     
!   PT        1.03     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.104336Jy  sigma=0.000782
! Fit after  self-cal, rms=0.104912Jy  sigma=0.000771
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.559 mas, bmaj=15.41 mas, bpa=14.68 degrees
! Estimated noise=806.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114851 Jy
! Component: 100  -  total flux cleaned = -0.00124449 Jy
! Component: 150  -  total flux cleaned = -0.00124647 Jy
! Component: 200  -  total flux cleaned = -0.00124638 Jy
! Total flux subtracted in 200 components = -0.00124638 Jy
! Clean residual min=-0.003004 max=0.002624 Jy/beam
! Clean residual mean=0.000005 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.138125 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.138125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104860Jy  sigma=0.000770
! Fit after  self-cal, rms=0.104895Jy  sigma=0.000770
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104895Jy  sigma=0.000770
! Fit after  self-cal, rms=0.106748Jy  sigma=0.000769
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.565 mas, bmaj=15.45 mas, bpa=14.62 degrees
! Estimated noise=806.933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000572439 Jy
! Component: 100  -  total flux cleaned = -0.00070283 Jy
! Component: 150  -  total flux cleaned = -0.000724542 Jy
! Component: 200  -  total flux cleaned = -0.000744403 Jy
! Total flux subtracted in 200 components = -0.000744403 Jy
! Clean residual min=-0.002889 max=0.002305 Jy/beam
! Clean residual mean=0.000006 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.137381 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.137381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106733Jy  sigma=0.000769
! Fit after  self-cal, rms=0.106785Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.56424e-06 Jy
! Component: 100  -  total flux cleaned = -2.35627e-05 Jy
! Component: 150  -  total flux cleaned = -4.09538e-05 Jy
! Component: 200  -  total flux cleaned = -7.23463e-05 Jy
! Total flux subtracted in 200 components = -7.23463e-05 Jy
! Clean residual min=-0.002864 max=0.002300 Jy/beam
! Clean residual mean=0.000006 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.137308 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.137308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106778Jy  sigma=0.000769
! Fit after  self-cal, rms=0.106771Jy  sigma=0.000769
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106771Jy  sigma=0.000769
! Fit after  self-cal, rms=0.109306Jy  sigma=0.000769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.567 mas, bmaj=15.46 mas, bpa=14.61 degrees
! Estimated noise=808.629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000419615 Jy
! Component: 100  -  total flux cleaned = -0.00044437 Jy
! Component: 150  -  total flux cleaned = -0.00044422 Jy
! Component: 200  -  total flux cleaned = -0.000443606 Jy
! Total flux subtracted in 200 components = -0.000443606 Jy
! Clean residual min=-0.002829 max=0.002067 Jy/beam
! Clean residual mean=0.000008 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.136865 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 62 components and 0.136865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109295Jy  sigma=0.000769
! Fit after  self-cal, rms=0.109352Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.30965e-05 Jy
! Component: 100  -  total flux cleaned = -4.27238e-05 Jy
! Component: 150  -  total flux cleaned = -2.55514e-05 Jy
! Component: 200  -  total flux cleaned = -9.06723e-06 Jy
! Total flux subtracted in 200 components = -9.06723e-06 Jy
! Clean residual min=-0.002790 max=0.002082 Jy/beam
! Clean residual mean=0.000008 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.136856 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 0.136856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109345Jy  sigma=0.000769
! Fit after  self-cal, rms=0.109340Jy  sigma=0.000769
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109340Jy  sigma=0.000769
! Fit after  self-cal, rms=0.110100Jy  sigma=0.000769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.382 mas, bmaj=30.11 mas, bpa=1.032 degrees
! Estimated noise=853.592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000273585 Jy
! Component: 100  -  total flux cleaned = -0.000316454 Jy
! Component: 150  -  total flux cleaned = -0.000355337 Jy
! Component: 200  -  total flux cleaned = -0.000389714 Jy
! Total flux subtracted in 200 components = -0.000389714 Jy
! Clean residual min=-0.002643 max=0.001931 Jy/beam
! Clean residual mean=0.000009 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.136466 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 74 components and 0.136466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110096Jy  sigma=0.000769
! Fit after  self-cal, rms=0.110108Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.74818e-05 Jy
! Component: 100  -  total flux cleaned = -6.01685e-05 Jy
! Component: 150  -  total flux cleaned = -8.81695e-05 Jy
! Component: 200  -  total flux cleaned = -0.000107553 Jy
! Total flux subtracted in 200 components = -0.000107553 Jy
! Clean residual min=-0.002644 max=0.001925 Jy/beam
! Clean residual mean=0.000009 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.136358 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 78 components and 0.136358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110106Jy  sigma=0.000769
! Fit after  self-cal, rms=0.110106Jy  sigma=0.000769
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=15.47 mas, bpa=14.66 degrees
! Estimated noise=809.175 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.569 x 15.47 at 14.66 degrees (North through East)
! Clean map  min=-0.0027005  max=0.1072 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=12.91 mas, bpa=17.96 degrees
! Estimated noise=1324.9 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0952978 Jy
! Component: 100  -  total flux cleaned = 0.118607 Jy
! Component: 150  -  total flux cleaned = 0.128006 Jy
! Component: 200  -  total flux cleaned = 0.132479 Jy
! Total flux subtracted in 200 components = 0.132479 Jy
! Clean residual min=-0.003381 max=0.002907 Jy/beam
! Clean residual mean=-0.000006 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.132479 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.132479 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=15.47 mas, bpa=14.66 degrees
! Estimated noise=809.175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262069 Jy
! Component: 100  -  total flux cleaned = 0.00360587 Jy
! Component: 150  -  total flux cleaned = 0.00371891 Jy
! Component: 200  -  total flux cleaned = 0.00384709 Jy
! Total flux subtracted in 200 components = 0.00384709 Jy
! Clean residual min=-0.002796 max=0.002136 Jy/beam
! Clean residual mean=0.000007 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.136326 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 42 components and 0.136326 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.382 mas, bmaj=30.11 mas, bpa=1.032 degrees
! Estimated noise=853.592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.12452e-05 Jy
! Component: 100  -  total flux cleaned = 7.75972e-05 Jy
! Component: 150  -  total flux cleaned = 7.78557e-05 Jy
! Component: 200  -  total flux cleaned = 7.80808e-05 Jy
! Total flux subtracted in 200 components = 7.80808e-05 Jy
! Clean residual min=-0.002632 max=0.001867 Jy/beam
! Clean residual mean=0.000009 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.136404 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.09174e-08 Jy
! Component: 100  -  total flux cleaned = -8.60814e-08 Jy
! Component: 150  -  total flux cleaned = -6.20329e-06 Jy
! Component: 200  -  total flux cleaned = -6.56738e-06 Jy
! Total flux subtracted in 200 components = -6.56738e-06 Jy
! Clean residual min=-0.002626 max=0.001870 Jy/beam
! Clean residual mean=0.000009 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.136397 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.136397 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=15.47 mas, bpa=14.66 degrees
! Estimated noise=809.175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.88752e-05 Jy
! Component: 100  -  total flux cleaned = 4.93572e-05 Jy
! Component: 150  -  total flux cleaned = 4.94876e-05 Jy
! Component: 200  -  total flux cleaned = 6.69623e-05 Jy
! Total flux subtracted in 200 components = 6.69623e-05 Jy
! Clean residual min=-0.002791 max=0.002108 Jy/beam
! Clean residual mean=0.000007 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.136464 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.136464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110103Jy  sigma=0.000769
! Fit after  self-cal, rms=0.110112Jy  sigma=0.000769
wmodel J0006-2955_S_2014_06_09_pus_map.mod
! Writing 61 model components to file: J0006-2955_S_2014_06_09_pus_map.mod
wobs J0006-2955_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J0006-2955_S_2014_06_09_pus_uvs.fits
wwins J0006-2955_S_2014_06_09_pus_map.win
! wwins: Wrote 1 windows to J0006-2955_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110239 Jy
! Component: 100  -  total flux cleaned = -0.00159022 Jy
! Component: 150  -  total flux cleaned = -0.0018678 Jy
! Component: 200  -  total flux cleaned = -0.00206385 Jy
! Component: 250  -  total flux cleaned = -0.0022183 Jy
! Component: 300  -  total flux cleaned = -0.00239363 Jy
! Component: 350  -  total flux cleaned = -0.00259168 Jy
! Component: 400  -  total flux cleaned = -0.00278344 Jy
! Component: 450  -  total flux cleaned = -0.00294265 Jy
! Component: 500  -  total flux cleaned = -0.0031238 Jy
! Component: 550  -  total flux cleaned = -0.00334963 Jy
! Component: 600  -  total flux cleaned = -0.00344719 Jy
! Component: 650  -  total flux cleaned = -0.00359113 Jy
! Component: 700  -  total flux cleaned = -0.00375494 Jy
! Component: 750  -  total flux cleaned = -0.00382329 Jy
! Component: 800  -  total flux cleaned = -0.00397915 Jy
! Component: 850  -  total flux cleaned = -0.00417507 Jy
! Component: 900  -  total flux cleaned = -0.00434504 Jy
! Component: 950  -  total flux cleaned = -0.00453277 Jy
! Component: 1000  -  total flux cleaned = -0.00465543 Jy
! Component: 1050  -  total flux cleaned = -0.00481551 Jy
! Component: 1100  -  total flux cleaned = -0.00503126 Jy
! Component: 1150  -  total flux cleaned = -0.00512804 Jy
! Component: 1200  -  total flux cleaned = -0.00527976 Jy
! Component: 1250  -  total flux cleaned = -0.00537346 Jy
! Component: 1300  -  total flux cleaned = -0.0053551 Jy
! Component: 1350  -  total flux cleaned = -0.00546378 Jy
! Component: 1400  -  total flux cleaned = -0.00549912 Jy
! Component: 1450  -  total flux cleaned = -0.00555153 Jy
! Component: 1500  -  total flux cleaned = -0.00558615 Jy
! Component: 1550  -  total flux cleaned = -0.00562039 Jy
! Component: 1600  -  total flux cleaned = -0.00560392 Jy
! Component: 1650  -  total flux cleaned = -0.0055878 Jy
! Component: 1700  -  total flux cleaned = -0.00558805 Jy
! Component: 1750  -  total flux cleaned = -0.00562004 Jy
! Component: 1800  -  total flux cleaned = -0.00554093 Jy
! Component: 1850  -  total flux cleaned = -0.0055096 Jy
! Component: 1900  -  total flux cleaned = -0.00549399 Jy
! Component: 1950  -  total flux cleaned = -0.00549378 Jy
! Component: 2000  -  total flux cleaned = -0.00555364 Jy
! Component: 2050  -  total flux cleaned = -0.00558347 Jy
! Component: 2100  -  total flux cleaned = -0.00564214 Jy
! Component: 2150  -  total flux cleaned = -0.00568579 Jy
! Component: 2200  -  total flux cleaned = -0.00571464 Jy
! Component: 2250  -  total flux cleaned = -0.0057718 Jy
! Component: 2300  -  total flux cleaned = -0.00580005 Jy
! Component: 2350  -  total flux cleaned = -0.00585596 Jy
! Component: 2400  -  total flux cleaned = -0.00585594 Jy
! Component: 2450  -  total flux cleaned = -0.00586959 Jy
! Component: 2500  -  total flux cleaned = -0.00592375 Jy
! Component: 2550  -  total flux cleaned = -0.00592378 Jy
! Component: 2600  -  total flux cleaned = -0.00593715 Jy
! Component: 2650  -  total flux cleaned = -0.00593732 Jy
! Component: 2700  -  total flux cleaned = -0.00595058 Jy
! Component: 2750  -  total flux cleaned = -0.00595061 Jy
! Component: 2800  -  total flux cleaned = -0.00596363 Jy
! Component: 2850  -  total flux cleaned = -0.00598909 Jy
! Component: 2900  -  total flux cleaned = -0.0059889 Jy
! Component: 2950  -  total flux cleaned = -0.00597633 Jy
! Component: 3000  -  total flux cleaned = -0.00601376 Jy
! Component: 3050  -  total flux cleaned = -0.00598893 Jy
! Component: 3100  -  total flux cleaned = -0.00600124 Jy
! Component: 3150  -  total flux cleaned = -0.00598912 Jy
! Component: 3200  -  total flux cleaned = -0.00600118 Jy
! Component: 3250  -  total flux cleaned = -0.00601317 Jy
! Component: 3300  -  total flux cleaned = -0.00596534 Jy
! Component: 3350  -  total flux cleaned = -0.00598933 Jy
! Component: 3400  -  total flux cleaned = -0.00597753 Jy
! Component: 3450  -  total flux cleaned = -0.00597749 Jy
! Component: 3500  -  total flux cleaned = -0.0060009 Jy
! Component: 3550  -  total flux cleaned = -0.00597764 Jy
! Component: 3600  -  total flux cleaned = -0.00601237 Jy
! Component: 3650  -  total flux cleaned = -0.00602387 Jy
! Component: 3700  -  total flux cleaned = -0.00601244 Jy
! Component: 3750  -  total flux cleaned = -0.00602386 Jy
! Component: 3800  -  total flux cleaned = -0.00603515 Jy
! Component: 3850  -  total flux cleaned = -0.0060464 Jy
! Component: 3900  -  total flux cleaned = -0.00610253 Jy
! Component: 3950  -  total flux cleaned = -0.00609132 Jy
! Component: 4000  -  total flux cleaned = -0.00611357 Jy
! Component: 4050  -  total flux cleaned = -0.00615792 Jy
! Total flux subtracted in 4096 components = -0.00616889 Jy
! Clean residual min=-0.000563 max=0.000670 Jy/beam
! Clean residual mean=0.000002 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.130296 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 346 components and 0.130296 Jy
![Exited script file: muppet]
wmap "J0006-2955_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.569 x 15.47 at 14.66 degrees (North through East)
! Clean map  min=-0.0021194  max=0.10671 Jy/beam
! Writing clean map to FITS file: J0006-2955_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.106712 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210449 
device "J0006-2955_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0006-2955_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.591635 0.591635 1.18327 2.36654 4.73308 9.46615 18.9323 37.8646 75.7292
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.106 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.569 x 15.47 at 14.66 degrees (North through East)
! Clean map  min=-0.0021194  max=0.10671 Jy/beam
quit
! Quitting program
! Log file J0006-2955_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:39:27 2016