! Started logfile: J2345-0717_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:42:34 2016 obs J2345-0717_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2345-0717_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69449 visibilities/baseline/integration-bin. ! Found source: J2345-0717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2345-0717_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979277Jy sigma=0.009299 ! Fit after self-cal, rms=0.932498Jy sigma=0.008995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=10.91 mas, bpa=9.683 degrees ! Estimated noise=1174.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590687 Jy ! Component: 100 - total flux cleaned = 0.0737999 Jy ! Total flux subtracted in 100 components = 0.0737999 Jy ! Clean residual min=-0.007077 max=0.009198 Jy/beam ! Clean residual mean=-0.000020 rms=0.002178 Jy/beam ! Combined flux in latest and established models = 0.0737999 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0737999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162333Jy sigma=0.000906 ! Fit after self-cal, rms=0.162226Jy sigma=0.000904 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.976 mas, bmaj=12.31 mas, bpa=8.897 degrees ! Estimated noise=619.609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442421 Jy ! Component: 100 - total flux cleaned = 0.00627474 Jy ! Component: 150 - total flux cleaned = 0.00659605 Jy ! Component: 200 - total flux cleaned = 0.00667272 Jy ! Total flux subtracted in 200 components = 0.00667272 Jy ! Clean residual min=-0.004030 max=0.005531 Jy/beam ! Clean residual mean=-0.000009 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.0804726 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0804726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161969Jy sigma=0.000904 ! Fit after self-cal, rms=0.161996Jy sigma=0.000904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.90 HN 1.13 KP 1.06 ! LA 1.08 MK 1.00* NL 1.03 OV 1.09 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.07 HN 1.26 KP 1.03 ! LA 1.03 MK 1.00* NL 1.11 OV 1.17 ! PT 0.97 SC 1.29 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.19 HN 1.15 KP 0.89 ! LA 0.80 MK 1.00* NL 1.05 OV 1.06 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.14 HN 0.76 KP 0.87 ! LA 0.77 MK 1.00* NL 1.06 OV 1.00 ! PT 0.83 SC 0.91 ! ! ! Fit before self-cal, rms=0.161996Jy sigma=0.000904 ! Fit after self-cal, rms=0.151726Jy sigma=0.000894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.042 mas, bmaj=12.46 mas, bpa=8.669 degrees ! Estimated noise=645.715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244869 Jy ! Component: 100 - total flux cleaned = 0.00212743 Jy ! Component: 150 - total flux cleaned = 0.0017715 Jy ! Component: 200 - total flux cleaned = 0.00138424 Jy ! Total flux subtracted in 200 components = 0.00138424 Jy ! Clean residual min=-0.003242 max=0.004582 Jy/beam ! Clean residual mean=-0.000004 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0818568 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.0818569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151355Jy sigma=0.000893 ! Fit after self-cal, rms=0.151605Jy sigma=0.000891 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151605Jy sigma=0.000891 ! Fit after self-cal, rms=0.112605Jy sigma=0.000877 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.992 mas, bmaj=12.34 mas, bpa=7.995 degrees ! Estimated noise=641.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106312 Jy ! Component: 100 - total flux cleaned = 0.00133894 Jy ! Component: 150 - total flux cleaned = 0.00143359 Jy ! Component: 200 - total flux cleaned = 0.00151841 Jy ! Total flux subtracted in 200 components = 0.00151841 Jy ! Clean residual min=-0.001943 max=0.002072 Jy/beam ! Clean residual mean=0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0833753 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 85 components and 0.0833753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112573Jy sigma=0.000877 ! Fit after self-cal, rms=0.112575Jy sigma=0.000875 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459305 Jy ! Component: 100 - total flux cleaned = -0.000429898 Jy ! Component: 150 - total flux cleaned = -0.000430926 Jy ! Component: 200 - total flux cleaned = -0.000374985 Jy ! Total flux subtracted in 200 components = -0.000374985 Jy ! Clean residual min=-0.001911 max=0.001979 Jy/beam ! Clean residual mean=-0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0830003 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.0830003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112554Jy sigma=0.000875 ! Fit after self-cal, rms=0.112545Jy sigma=0.000875 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112545Jy sigma=0.000875 ! Fit after self-cal, rms=0.113288Jy sigma=0.000874 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.977 mas, bmaj=12.34 mas, bpa=8.14 degrees ! Estimated noise=643.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735787 Jy ! Component: 100 - total flux cleaned = 0.00100243 Jy ! Component: 150 - total flux cleaned = 0.00114215 Jy ! Component: 200 - total flux cleaned = 0.00119351 Jy ! Total flux subtracted in 200 components = 0.00119351 Jy ! Clean residual min=-0.001911 max=0.002024 Jy/beam ! Clean residual mean=-0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0841938 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 0.0841938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113263Jy sigma=0.000874 ! Fit after self-cal, rms=0.113296Jy sigma=0.000874 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (74.5, -107). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129379 Jy ! Component: 100 - total flux cleaned = 0.00125921 Jy ! Component: 150 - total flux cleaned = 0.00113658 Jy ! Component: 200 - total flux cleaned = 0.0010812 Jy ! Total flux subtracted in 200 components = 0.0010812 Jy ! Clean residual min=-0.001848 max=0.001551 Jy/beam ! Clean residual mean=-0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.085275 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 0.085275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113255Jy sigma=0.000874 ! Fit after self-cal, rms=0.113248Jy sigma=0.000874 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113248Jy sigma=0.000874 ! Fit after self-cal, rms=0.113590Jy sigma=0.000874 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.6 mas, bmaj=15.38 mas, bpa=3.363 degrees ! Estimated noise=691.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959493 Jy ! Component: 100 - total flux cleaned = 0.00101709 Jy ! Component: 150 - total flux cleaned = 0.00104352 Jy ! Component: 200 - total flux cleaned = 0.00106533 Jy ! Total flux subtracted in 200 components = 0.00106533 Jy ! Clean residual min=-0.001812 max=0.001421 Jy/beam ! Clean residual mean=0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0863403 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 167 components and 0.0863403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113572Jy sigma=0.000874 ! Fit after self-cal, rms=0.113574Jy sigma=0.000874 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47236e-05 Jy ! Component: 100 - total flux cleaned = -5.19664e-05 Jy ! Component: 150 - total flux cleaned = -9.19921e-05 Jy ! Component: 200 - total flux cleaned = -0.000109939 Jy ! Total flux subtracted in 200 components = -0.000109939 Jy ! Clean residual min=-0.001820 max=0.001372 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0862304 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 180 components and 0.0862304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113565Jy sigma=0.000874 ! Fit after self-cal, rms=0.113567Jy sigma=0.000874 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=12.35 mas, bpa=8.329 degrees ! Estimated noise=645.499 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.963 x 12.35 at 8.329 degrees (North through East) ! Clean map min=-0.0028499 max=0.074656 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=10.8 mas, bpa=8.909 degrees ! Estimated noise=1158.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589858 Jy ! Component: 100 - total flux cleaned = 0.0743154 Jy ! Component: 150 - total flux cleaned = 0.0795996 Jy ! Component: 200 - total flux cleaned = 0.0808076 Jy ! Total flux subtracted in 200 components = 0.0808076 Jy ! Clean residual min=-0.003281 max=0.003363 Jy/beam ! Clean residual mean=-0.000008 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.0808076 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0808076 Jy ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=12.35 mas, bpa=8.329 degrees ! Estimated noise=645.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317393 Jy ! Component: 100 - total flux cleaned = 0.00404471 Jy ! Component: 150 - total flux cleaned = 0.00433057 Jy ! Component: 200 - total flux cleaned = 0.00457974 Jy ! Total flux subtracted in 200 components = 0.00457974 Jy ! Clean residual min=-0.001875 max=0.001672 Jy/beam ! Clean residual mean=-0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0853874 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 0.0853873 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.6 mas, bmaj=15.38 mas, bpa=3.363 degrees ! Estimated noise=691.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641721 Jy ! Component: 100 - total flux cleaned = 0.000643899 Jy ! Component: 150 - total flux cleaned = 0.000718611 Jy ! Component: 200 - total flux cleaned = 0.00078481 Jy ! Total flux subtracted in 200 components = 0.00078481 Jy ! Clean residual min=-0.001951 max=0.001564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0861722 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12094e-05 Jy ! Component: 100 - total flux cleaned = 5.9757e-05 Jy ! Component: 150 - total flux cleaned = 5.90864e-05 Jy ! Component: 200 - total flux cleaned = 9.01007e-06 Jy ! Total flux subtracted in 200 components = 9.01007e-06 Jy ! Clean residual min=-0.001926 max=0.001459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0861812 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 106 components and 0.0861812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=12.35 mas, bpa=8.329 degrees ! Estimated noise=645.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262546 Jy ! Component: 100 - total flux cleaned = -0.000260712 Jy ! Component: 150 - total flux cleaned = -0.000223665 Jy ! Component: 200 - total flux cleaned = -0.000188852 Jy ! Total flux subtracted in 200 components = -0.000188852 Jy ! Clean residual min=-0.001788 max=0.001522 Jy/beam ! Clean residual mean=-0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0859923 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 132 components and 0.0859923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113591Jy sigma=0.000874 ! Fit after self-cal, rms=0.113605Jy sigma=0.000874 wmodel J2345-0717_S_2014_08_05_pus_map.mod ! Writing 132 model components to file: J2345-0717_S_2014_08_05_pus_map.mod wobs J2345-0717_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2345-0717_S_2014_08_05_pus_uvs.fits wwins J2345-0717_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J2345-0717_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738157 Jy ! Component: 100 - total flux cleaned = -0.00108708 Jy ! Component: 150 - total flux cleaned = -0.00151424 Jy ! Component: 200 - total flux cleaned = -0.0018271 Jy ! Component: 250 - total flux cleaned = -0.00203609 Jy ! Component: 300 - total flux cleaned = -0.00217052 Jy ! Component: 350 - total flux cleaned = -0.0022797 Jy ! Component: 400 - total flux cleaned = -0.00242845 Jy ! Component: 450 - total flux cleaned = -0.00257379 Jy ! Component: 500 - total flux cleaned = -0.00265503 Jy ! Component: 550 - total flux cleaned = -0.00275435 Jy ! Component: 600 - total flux cleaned = -0.00285183 Jy ! Component: 650 - total flux cleaned = -0.00296628 Jy ! Component: 700 - total flux cleaned = -0.00306024 Jy ! Component: 750 - total flux cleaned = -0.00317047 Jy ! Component: 800 - total flux cleaned = -0.00329687 Jy ! Component: 850 - total flux cleaned = -0.0033861 Jy ! Component: 900 - total flux cleaned = -0.0035783 Jy ! Component: 950 - total flux cleaned = -0.00368137 Jy ! Component: 1000 - total flux cleaned = -0.00386743 Jy ! Component: 1050 - total flux cleaned = -0.00395046 Jy ! Component: 1100 - total flux cleaned = -0.00411463 Jy ! Component: 1150 - total flux cleaned = -0.0041469 Jy ! Component: 1200 - total flux cleaned = -0.00429121 Jy ! Component: 1250 - total flux cleaned = -0.00438638 Jy ! Component: 1300 - total flux cleaned = -0.00451145 Jy ! Component: 1350 - total flux cleaned = -0.00463514 Jy ! Component: 1400 - total flux cleaned = -0.00474183 Jy ! Component: 1450 - total flux cleaned = -0.00484749 Jy ! Component: 1500 - total flux cleaned = -0.00493681 Jy ! Component: 1550 - total flux cleaned = -0.00501052 Jy ! Component: 1600 - total flux cleaned = -0.00517059 Jy ! Component: 1650 - total flux cleaned = -0.00522825 Jy ! Component: 1700 - total flux cleaned = -0.00528544 Jy ! Component: 1750 - total flux cleaned = -0.00538421 Jy ! Component: 1800 - total flux cleaned = -0.00544006 Jy ! Component: 1850 - total flux cleaned = -0.00552285 Jy ! Component: 1900 - total flux cleaned = -0.00564555 Jy ! Component: 1950 - total flux cleaned = -0.00564547 Jy ! Component: 2000 - total flux cleaned = -0.00567228 Jy ! Component: 2050 - total flux cleaned = -0.00572541 Jy ! Component: 2100 - total flux cleaned = -0.00576476 Jy ! Component: 2150 - total flux cleaned = -0.0058166 Jy ! Component: 2200 - total flux cleaned = -0.00582956 Jy ! Component: 2250 - total flux cleaned = -0.00584225 Jy ! Component: 2300 - total flux cleaned = -0.00585503 Jy ! Component: 2350 - total flux cleaned = -0.00591746 Jy ! Component: 2400 - total flux cleaned = -0.00592975 Jy ! Component: 2450 - total flux cleaned = -0.00594194 Jy ! Component: 2500 - total flux cleaned = -0.00597844 Jy ! Component: 2550 - total flux cleaned = -0.00599052 Jy ! Component: 2600 - total flux cleaned = -0.00601432 Jy ! Component: 2650 - total flux cleaned = -0.00599075 Jy ! Component: 2700 - total flux cleaned = -0.00597907 Jy ! Component: 2750 - total flux cleaned = -0.00595581 Jy ! Component: 2800 - total flux cleaned = -0.00595573 Jy ! Component: 2850 - total flux cleaned = -0.0059672 Jy ! Component: 2900 - total flux cleaned = -0.00593296 Jy ! Component: 2950 - total flux cleaned = -0.00587663 Jy ! Component: 3000 - total flux cleaned = -0.00583204 Jy ! Component: 3050 - total flux cleaned = -0.00587646 Jy ! Component: 3100 - total flux cleaned = -0.00582125 Jy ! Component: 3150 - total flux cleaned = -0.00577739 Jy ! Component: 3200 - total flux cleaned = -0.00574477 Jy ! Component: 3250 - total flux cleaned = -0.00575558 Jy ! Component: 3300 - total flux cleaned = -0.00568062 Jy ! Component: 3350 - total flux cleaned = -0.00566993 Jy ! Component: 3400 - total flux cleaned = -0.00562769 Jy ! Component: 3450 - total flux cleaned = -0.00562773 Jy ! Component: 3500 - total flux cleaned = -0.00558597 Jy ! Component: 3550 - total flux cleaned = -0.0056067 Jy ! Component: 3600 - total flux cleaned = -0.00555519 Jy ! Component: 3650 - total flux cleaned = -0.00552448 Jy ! Component: 3700 - total flux cleaned = -0.00550412 Jy ! Component: 3750 - total flux cleaned = -0.00549394 Jy ! Component: 3800 - total flux cleaned = -0.00546381 Jy ! Component: 3850 - total flux cleaned = -0.00543386 Jy ! Component: 3900 - total flux cleaned = -0.00540405 Jy ! Component: 3950 - total flux cleaned = -0.00537447 Jy ! Component: 4000 - total flux cleaned = -0.00536459 Jy ! Component: 4050 - total flux cleaned = -0.0052962 Jy ! Total flux subtracted in 4096 components = -0.00532537 Jy ! Clean residual min=-0.000549 max=0.000626 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.080667 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 406 components and 0.080667 Jy ![Exited script file: muppet] wmap "J2345-0717_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.963 x 12.35 at 8.329 degrees (North through East) ! Clean map min=-0.0026919 max=0.074581 Jy/beam ! Writing clean map to FITS file: J2345-0717_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.074581 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190212 device "J2345-0717_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2345-0717_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.765122 0.765122 1.53024 3.06049 6.12098 12.242 24.4839 48.9678 97.9356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.963 x 12.35 at 8.329 degrees (North through East) ! Clean map min=-0.0026919 max=0.074581 Jy/beam quit ! Quitting program ! Log file J2345-0717_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:42:40 2016