! Started logfile: J2320+1829_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:41:08 2016 obs J2320+1829_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2320+1829_S_2014_08_05_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750136 visibilities/baseline/integration-bin. ! Found source: J2320+1829 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2320+1829_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898053Jy sigma=0.010000 ! Fit after self-cal, rms=0.886267Jy sigma=0.009907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.2 mas, bmaj=8.229 mas, bpa=24.5 degrees ! Estimated noise=899.307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0903904 Jy ! Component: 100 - total flux cleaned = 0.110129 Jy ! Total flux subtracted in 100 components = 0.110129 Jy ! Clean residual min=-0.004655 max=0.007720 Jy/beam ! Clean residual mean=-0.000028 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.110129 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.110129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079219Jy sigma=0.000800 ! Fit after self-cal, rms=0.079194Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.042 mas, bmaj=8.867 mas, bpa=24.57 degrees ! Estimated noise=612.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800587 Jy ! Component: 100 - total flux cleaned = 0.0128254 Jy ! Component: 150 - total flux cleaned = 0.0159809 Jy ! Component: 200 - total flux cleaned = 0.0181024 Jy ! Total flux subtracted in 200 components = 0.0181024 Jy ! Clean residual min=-0.003185 max=0.004670 Jy/beam ! Clean residual mean=0.000000 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.128231 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 55 components and 0.128231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078227Jy sigma=0.000790 ! Fit after self-cal, rms=0.078223Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.86 HN 0.97 KP 1.07 ! LA 1.07 MK 1.00* NL 0.97 OV 0.97 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.01 KP 1.01 ! LA 1.05 MK 1.00* NL 1.01 OV 1.00 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.19 HN 1.01 KP 0.90 ! LA 0.83 MK 1.00* NL 0.97 OV 0.95 ! PT 0.99 SC 1.16 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.03 KP 0.87 ! LA 0.83 MK 1.00* NL 1.04 OV 0.98 ! PT 1.02 SC 1.08 ! ! ! Fit before self-cal, rms=0.078223Jy sigma=0.000790 ! Fit after self-cal, rms=0.076308Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.172 mas, bmaj=8.901 mas, bpa=23.75 degrees ! Estimated noise=605.172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135901 Jy ! Component: 100 - total flux cleaned = -0.00130809 Jy ! Component: 150 - total flux cleaned = -0.00126649 Jy ! Component: 200 - total flux cleaned = -0.00122839 Jy ! Total flux subtracted in 200 components = -0.00122839 Jy ! Clean residual min=-0.002501 max=0.003296 Jy/beam ! Clean residual mean=0.000003 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.127003 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.127003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076215Jy sigma=0.000776 ! Fit after self-cal, rms=0.076226Jy sigma=0.000776 ! Inverting map ! Added new window around map position (-8.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264308 Jy ! Component: 100 - total flux cleaned = 0.00334444 Jy ! Component: 150 - total flux cleaned = 0.00370052 Jy ! Component: 200 - total flux cleaned = 0.004007 Jy ! Total flux subtracted in 200 components = 0.004007 Jy ! Clean residual min=-0.002280 max=0.002385 Jy/beam ! Clean residual mean=0.000003 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.13101 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 0.13101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076065Jy sigma=0.000775 ! Fit after self-cal, rms=0.076040Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076040Jy sigma=0.000775 ! Fit after self-cal, rms=0.081772Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.145 mas, bmaj=8.879 mas, bpa=24.03 degrees ! Estimated noise=605.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456418 Jy ! Component: 100 - total flux cleaned = 0.000525542 Jy ! Component: 150 - total flux cleaned = 0.000554343 Jy ! Component: 200 - total flux cleaned = 0.0005058 Jy ! Total flux subtracted in 200 components = 0.0005058 Jy ! Clean residual min=-0.001615 max=0.002027 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.131516 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.131516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081743Jy sigma=0.000771 ! Fit after self-cal, rms=0.081822Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.5, 116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114285 Jy ! Component: 100 - total flux cleaned = 0.00125694 Jy ! Component: 150 - total flux cleaned = 0.00155205 Jy ! Component: 200 - total flux cleaned = 0.00173719 Jy ! Total flux subtracted in 200 components = 0.00173719 Jy ! Clean residual min=-0.001650 max=0.001358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.133253 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 142 components and 0.133253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081749Jy sigma=0.000770 ! Fit after self-cal, rms=0.081743Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081743Jy sigma=0.000770 ! Fit after self-cal, rms=0.081704Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.146 mas, bmaj=8.887 mas, bpa=24.03 degrees ! Estimated noise=603.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111698 Jy ! Component: 100 - total flux cleaned = 0.000194589 Jy ! Component: 150 - total flux cleaned = 0.000220738 Jy ! Component: 200 - total flux cleaned = 0.000268297 Jy ! Total flux subtracted in 200 components = 0.000268297 Jy ! Clean residual min=-0.001627 max=0.001344 Jy/beam ! Clean residual mean=0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.133521 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 162 components and 0.133521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081684Jy sigma=0.000770 ! Fit after self-cal, rms=0.081685Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28844e-05 Jy ! Component: 100 - total flux cleaned = -1.00311e-05 Jy ! Component: 150 - total flux cleaned = 1.1584e-05 Jy ! Component: 200 - total flux cleaned = 3.21392e-05 Jy ! Total flux subtracted in 200 components = 3.21392e-05 Jy ! Clean residual min=-0.001653 max=0.001329 Jy/beam ! Clean residual mean=0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.133553 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 174 components and 0.133553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081673Jy sigma=0.000770 ! Fit after self-cal, rms=0.081672Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081672Jy sigma=0.000770 ! Fit after self-cal, rms=0.081693Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.001 mas, bmaj=10.51 mas, bpa=11.14 degrees ! Estimated noise=656.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332661 Jy ! Component: 100 - total flux cleaned = -0.000409245 Jy ! Component: 150 - total flux cleaned = -0.000443045 Jy ! Component: 200 - total flux cleaned = -0.000458584 Jy ! Total flux subtracted in 200 components = -0.000458584 Jy ! Clean residual min=-0.001493 max=0.001345 Jy/beam ! Clean residual mean=0.000001 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.133095 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 187 components and 0.133095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081686Jy sigma=0.000770 ! Fit after self-cal, rms=0.081685Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.03246e-05 Jy ! Component: 100 - total flux cleaned = 6.1404e-06 Jy ! Component: 150 - total flux cleaned = -2.04477e-05 Jy ! Component: 200 - total flux cleaned = -5.76753e-05 Jy ! Total flux subtracted in 200 components = -5.76753e-05 Jy ! Clean residual min=-0.001516 max=0.001335 Jy/beam ! Clean residual mean=0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.133037 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 194 components and 0.133037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081680Jy sigma=0.000770 ! Fit after self-cal, rms=0.081680Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.148 mas, bmaj=8.89 mas, bpa=24.03 degrees ! Estimated noise=603.643 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.148 x 8.89 at 24.03 degrees (North through East) ! Clean map min=-0.0018762 max=0.11365 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.276 mas, bmaj=8.189 mas, bpa=24.14 degrees ! Estimated noise=897.906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901432 Jy ! Component: 100 - total flux cleaned = 0.109825 Jy ! Component: 150 - total flux cleaned = 0.116041 Jy ! Component: 200 - total flux cleaned = 0.119475 Jy ! Total flux subtracted in 200 components = 0.119475 Jy ! Clean residual min=-0.002737 max=0.002800 Jy/beam ! Clean residual mean=-0.000010 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.119475 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.119475 Jy ! Inverting map and beam ! Estimated beam: bmin=5.148 mas, bmaj=8.89 mas, bpa=24.03 degrees ! Estimated noise=603.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (82, 126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337246 Jy ! Component: 100 - total flux cleaned = 0.00540453 Jy ! Component: 150 - total flux cleaned = 0.00689377 Jy ! Component: 200 - total flux cleaned = 0.00806092 Jy ! Total flux subtracted in 200 components = 0.00806092 Jy ! Clean residual min=-0.001659 max=0.001679 Jy/beam ! Clean residual mean=-0.000007 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.127536 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 66 components and 0.127536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.001 mas, bmaj=10.51 mas, bpa=11.14 degrees ! Estimated noise=656.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172934 Jy ! Component: 100 - total flux cleaned = 0.00262122 Jy ! Component: 150 - total flux cleaned = 0.00306257 Jy ! Component: 200 - total flux cleaned = 0.00341044 Jy ! Total flux subtracted in 200 components = 0.00341044 Jy ! Clean residual min=-0.001424 max=0.001526 Jy/beam ! Clean residual mean=-0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.130946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215033 Jy ! Component: 100 - total flux cleaned = 0.000380429 Jy ! Component: 150 - total flux cleaned = 0.000456186 Jy ! Component: 200 - total flux cleaned = 0.000479312 Jy ! Total flux subtracted in 200 components = 0.000479312 Jy ! Clean residual min=-0.001454 max=0.001506 Jy/beam ! Clean residual mean=-0.000003 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.131425 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 147 components and 0.131425 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.148 mas, bmaj=8.89 mas, bpa=24.03 degrees ! Estimated noise=603.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.84201e-05 Jy ! Component: 100 - total flux cleaned = 8.37949e-05 Jy ! Component: 150 - total flux cleaned = 0.000109641 Jy ! Component: 200 - total flux cleaned = 0.000157229 Jy ! Total flux subtracted in 200 components = 0.000157229 Jy ! Clean residual min=-0.001533 max=0.001388 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.131582 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 170 components and 0.131582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081690Jy sigma=0.000770 ! Fit after self-cal, rms=0.081690Jy sigma=0.000770 wmodel J2320+1829_S_2014_08_05_pus_map.mod ! Writing 170 model components to file: J2320+1829_S_2014_08_05_pus_map.mod wobs J2320+1829_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2320+1829_S_2014_08_05_pus_uvs.fits wwins J2320+1829_S_2014_08_05_pus_map.win ! wwins: Wrote 4 windows to J2320+1829_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225907 Jy ! Component: 100 - total flux cleaned = -0.000517097 Jy ! Component: 150 - total flux cleaned = -0.000723619 Jy ! Component: 200 - total flux cleaned = -0.000922181 Jy ! Component: 250 - total flux cleaned = -0.00117781 Jy ! Component: 300 - total flux cleaned = -0.001425 Jy ! Component: 350 - total flux cleaned = -0.00160483 Jy ! Component: 400 - total flux cleaned = -0.00176031 Jy ! Component: 450 - total flux cleaned = -0.00189302 Jy ! Component: 500 - total flux cleaned = -0.00200356 Jy ! Component: 550 - total flux cleaned = -0.00209345 Jy ! Component: 600 - total flux cleaned = -0.00221702 Jy ! Component: 650 - total flux cleaned = -0.00233845 Jy ! Component: 700 - total flux cleaned = -0.00250824 Jy ! Component: 750 - total flux cleaned = -0.00262505 Jy ! Component: 800 - total flux cleaned = -0.00269012 Jy ! Component: 850 - total flux cleaned = -0.00277063 Jy ! Component: 900 - total flux cleaned = -0.00280217 Jy ! Component: 950 - total flux cleaned = -0.00283337 Jy ! Component: 1000 - total flux cleaned = -0.00283354 Jy ! Component: 1050 - total flux cleaned = -0.0028337 Jy ! Component: 1100 - total flux cleaned = -0.00283383 Jy ! Component: 1150 - total flux cleaned = -0.00286347 Jy ! Component: 1200 - total flux cleaned = -0.00289283 Jy ! Component: 1250 - total flux cleaned = -0.00296495 Jy ! Component: 1300 - total flux cleaned = -0.00302195 Jy ! Component: 1350 - total flux cleaned = -0.00306387 Jy ! Component: 1400 - total flux cleaned = -0.00310546 Jy ! Component: 1450 - total flux cleaned = -0.00313289 Jy ! Component: 1500 - total flux cleaned = -0.00311928 Jy ! Component: 1550 - total flux cleaned = -0.00315981 Jy ! Component: 1600 - total flux cleaned = -0.00321307 Jy ! Component: 1650 - total flux cleaned = -0.00321319 Jy ! Component: 1700 - total flux cleaned = -0.00325231 Jy ! Component: 1750 - total flux cleaned = -0.00327804 Jy ! Component: 1800 - total flux cleaned = -0.00331655 Jy ! Component: 1850 - total flux cleaned = -0.0033041 Jy ! Component: 1900 - total flux cleaned = -0.00335423 Jy ! Component: 1950 - total flux cleaned = -0.00337911 Jy ! Component: 2000 - total flux cleaned = -0.00339148 Jy ! Component: 2050 - total flux cleaned = -0.00337921 Jy ! Component: 2100 - total flux cleaned = -0.00341563 Jy ! Component: 2150 - total flux cleaned = -0.00342758 Jy ! Component: 2200 - total flux cleaned = -0.0034397 Jy ! Component: 2250 - total flux cleaned = -0.00347514 Jy ! Component: 2300 - total flux cleaned = -0.00351024 Jy ! Component: 2350 - total flux cleaned = -0.00352188 Jy ! Component: 2400 - total flux cleaned = -0.00353344 Jy ! Component: 2450 - total flux cleaned = -0.00355639 Jy ! Component: 2500 - total flux cleaned = -0.00360199 Jy ! Component: 2550 - total flux cleaned = -0.00362458 Jy ! Component: 2600 - total flux cleaned = -0.00360224 Jy ! Component: 2650 - total flux cleaned = -0.00364669 Jy ! Component: 2700 - total flux cleaned = -0.00366887 Jy ! Component: 2750 - total flux cleaned = -0.00361406 Jy ! Component: 2800 - total flux cleaned = -0.00365773 Jy ! Component: 2850 - total flux cleaned = -0.00364698 Jy ! Component: 2900 - total flux cleaned = -0.00367926 Jy ! Component: 2950 - total flux cleaned = -0.00367931 Jy ! Component: 3000 - total flux cleaned = -0.00367943 Jy ! Component: 3050 - total flux cleaned = -0.0037005 Jy ! Component: 3100 - total flux cleaned = -0.00372153 Jy ! Component: 3150 - total flux cleaned = -0.00374241 Jy ! Component: 3200 - total flux cleaned = -0.00376313 Jy ! Component: 3250 - total flux cleaned = -0.00380414 Jy ! Component: 3300 - total flux cleaned = -0.00379383 Jy ! Component: 3350 - total flux cleaned = -0.00379377 Jy ! Component: 3400 - total flux cleaned = -0.00379379 Jy ! Component: 3450 - total flux cleaned = -0.00380383 Jy ! Component: 3500 - total flux cleaned = -0.00380389 Jy ! Component: 3550 - total flux cleaned = -0.00381387 Jy ! Component: 3600 - total flux cleaned = -0.00384339 Jy ! Component: 3650 - total flux cleaned = -0.00385322 Jy ! Component: 3700 - total flux cleaned = -0.00387254 Jy ! Component: 3750 - total flux cleaned = -0.00386276 Jy ! Component: 3800 - total flux cleaned = -0.0038724 Jy ! Component: 3850 - total flux cleaned = -0.003882 Jy ! Component: 3900 - total flux cleaned = -0.00387247 Jy ! Component: 3950 - total flux cleaned = -0.00387252 Jy ! Component: 4000 - total flux cleaned = -0.00388195 Jy ! Component: 4050 - total flux cleaned = -0.00387266 Jy ! Total flux subtracted in 4096 components = -0.00386333 Jy ! Clean residual min=-0.000636 max=0.000602 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.127719 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 461 components and 0.127719 Jy ![Exited script file: muppet] wmap "J2320+1829_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.148 x 8.89 at 24.03 degrees (North through East) ! Clean map min=-0.0017118 max=0.11411 Jy/beam ! Writing clean map to FITS file: J2320+1829_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114114 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180175 device "J2320+1829_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2320+1829_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.473671 0.473671 0.947342 1.89468 3.78937 7.57874 15.1575 30.315 60.6299 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.148 x 8.89 at 24.03 degrees (North through East) ! Clean map min=-0.0017118 max=0.11411 Jy/beam quit ! Quitting program ! Log file J2320+1829_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:41:13 2016