! Started logfile: J2318-1659_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:40:59 2016 obs J2318-1659_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2318-1659_S_2014_08_05_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.727586 visibilities/baseline/integration-bin. ! Found source: J2318-1659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2318-1659_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912843Jy sigma=0.008935 ! Fit after self-cal, rms=0.899165Jy sigma=0.008835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=11.69 mas, bpa=21.46 degrees ! Estimated noise=1105.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0794422 Jy ! Component: 100 - total flux cleaned = 0.0967836 Jy ! Total flux subtracted in 100 components = 0.0967836 Jy ! Clean residual min=-0.004552 max=0.005419 Jy/beam ! Clean residual mean=-0.000012 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0967836 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0967836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086106Jy sigma=0.000777 ! Fit after self-cal, rms=0.086091Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=13.08 mas, bpa=19.71 degrees ! Estimated noise=841.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073702 Jy ! Component: 100 - total flux cleaned = 0.0113461 Jy ! Component: 150 - total flux cleaned = 0.0137922 Jy ! Component: 200 - total flux cleaned = 0.0153534 Jy ! Total flux subtracted in 200 components = 0.0153534 Jy ! Clean residual min=-0.003569 max=0.003193 Jy/beam ! Clean residual mean=-0.000008 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.112137 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.112137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085413Jy sigma=0.000771 ! Fit after self-cal, rms=0.085426Jy sigma=0.000771 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 HN 1.04 KP 1.07 ! LA 1.05 MK 1.00* NL 0.94 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.03 KP 1.00 ! LA 1.11 MK 1.00* NL 1.03 OV 0.98 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.05 KP 0.88 ! LA 0.86 MK 1.00* NL 0.95 OV 0.96 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.09 HN 1.07 KP 0.85 ! LA 0.81 MK 1.00* NL 1.04 OV 1.02 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.085426Jy sigma=0.000771 ! Fit after self-cal, rms=0.083980Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.989 mas, bmaj=13.17 mas, bpa=19.76 degrees ! Estimated noise=837.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131967 Jy ! Component: 100 - total flux cleaned = -0.00169775 Jy ! Component: 150 - total flux cleaned = -0.00174351 Jy ! Component: 200 - total flux cleaned = -0.00172313 Jy ! Total flux subtracted in 200 components = -0.00172313 Jy ! Clean residual min=-0.002720 max=0.002415 Jy/beam ! Clean residual mean=-0.000008 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.110414 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.110414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083952Jy sigma=0.000764 ! Fit after self-cal, rms=0.083962Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083962Jy sigma=0.000763 ! Fit after self-cal, rms=0.084831Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=13.15 mas, bpa=19.72 degrees ! Estimated noise=836.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401747 Jy ! Component: 100 - total flux cleaned = -0.000590467 Jy ! Component: 150 - total flux cleaned = -0.000650077 Jy ! Component: 200 - total flux cleaned = -0.00068484 Jy ! Total flux subtracted in 200 components = -0.00068484 Jy ! Clean residual min=-0.002431 max=0.002031 Jy/beam ! Clean residual mean=-0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.109729 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.109729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084818Jy sigma=0.000762 ! Fit after self-cal, rms=0.084840Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.60129e-06 Jy ! Component: 100 - total flux cleaned = -1.16132e-05 Jy ! Component: 150 - total flux cleaned = -1.13474e-05 Jy ! Component: 200 - total flux cleaned = -1.14333e-05 Jy ! Total flux subtracted in 200 components = -1.14333e-05 Jy ! Clean residual min=-0.002441 max=0.002013 Jy/beam ! Clean residual mean=-0.000006 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.109718 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.109718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084834Jy sigma=0.000762 ! Fit after self-cal, rms=0.084833Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084833Jy sigma=0.000762 ! Fit after self-cal, rms=0.085392Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=13.14 mas, bpa=19.75 degrees ! Estimated noise=835.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251603 Jy ! Component: 100 - total flux cleaned = -0.000360671 Jy ! Component: 150 - total flux cleaned = -0.000407987 Jy ! Component: 200 - total flux cleaned = -0.000451068 Jy ! Total flux subtracted in 200 components = -0.000451068 Jy ! Clean residual min=-0.002328 max=0.001938 Jy/beam ! Clean residual mean=-0.000005 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.109267 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.109267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085384Jy sigma=0.000762 ! Fit after self-cal, rms=0.085396Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.35771e-05 Jy ! Component: 100 - total flux cleaned = -5.6258e-05 Jy ! Component: 150 - total flux cleaned = -6.83078e-05 Jy ! Component: 200 - total flux cleaned = -7.96175e-05 Jy ! Total flux subtracted in 200 components = -7.96175e-05 Jy ! Clean residual min=-0.002333 max=0.001922 Jy/beam ! Clean residual mean=-0.000006 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.109187 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.109187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085392Jy sigma=0.000762 ! Fit after self-cal, rms=0.085390Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085390Jy sigma=0.000762 ! Fit after self-cal, rms=0.085505Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=17.72 mas, bpa=10.47 degrees ! Estimated noise=933.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.56595e-05 Jy ! Component: 100 - total flux cleaned = -8.77707e-05 Jy ! Component: 150 - total flux cleaned = -8.04356e-05 Jy ! Component: 200 - total flux cleaned = -6.62395e-05 Jy ! Total flux subtracted in 200 components = -6.62395e-05 Jy ! Clean residual min=-0.002150 max=0.001606 Jy/beam ! Clean residual mean=-0.000009 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.109121 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.109121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085505Jy sigma=0.000762 ! Fit after self-cal, rms=0.085511Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.94153e-05 Jy ! Component: 100 - total flux cleaned = 3.67438e-05 Jy ! Component: 150 - total flux cleaned = 4.29212e-05 Jy ! Component: 200 - total flux cleaned = 4.87684e-05 Jy ! Total flux subtracted in 200 components = 4.87684e-05 Jy ! Clean residual min=-0.002147 max=0.001609 Jy/beam ! Clean residual mean=-0.000009 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.10917 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.10917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085510Jy sigma=0.000762 ! Fit after self-cal, rms=0.085511Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=13.15 mas, bpa=19.8 degrees ! Estimated noise=833.966 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.993 x 13.15 at 19.8 degrees (North through East) ! Clean map min=-0.0022442 max=0.10189 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=11.73 mas, bpa=21.5 degrees ! Estimated noise=1102.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790509 Jy ! Component: 100 - total flux cleaned = 0.0962891 Jy ! Component: 150 - total flux cleaned = 0.101323 Jy ! Component: 200 - total flux cleaned = 0.103909 Jy ! Total flux subtracted in 200 components = 0.103909 Jy ! Clean residual min=-0.003300 max=0.002962 Jy/beam ! Clean residual mean=-0.000006 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.103909 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.103909 Jy ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=13.15 mas, bpa=19.8 degrees ! Estimated noise=833.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276489 Jy ! Component: 100 - total flux cleaned = 0.00372076 Jy ! Component: 150 - total flux cleaned = 0.00413899 Jy ! Component: 200 - total flux cleaned = 0.00437055 Jy ! Total flux subtracted in 200 components = 0.00437055 Jy ! Clean residual min=-0.002265 max=0.001835 Jy/beam ! Clean residual mean=-0.000006 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.108279 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.108279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.991 mas, bmaj=17.72 mas, bpa=10.47 degrees ! Estimated noise=933.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689677 Jy ! Component: 100 - total flux cleaned = 0.000988438 Jy ! Component: 150 - total flux cleaned = 0.00102571 Jy ! Component: 200 - total flux cleaned = 0.00103445 Jy ! Total flux subtracted in 200 components = 0.00103445 Jy ! Clean residual min=-0.002160 max=0.001656 Jy/beam ! Clean residual mean=-0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.109314 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21851e-08 Jy ! Component: 100 - total flux cleaned = -7.01127e-06 Jy ! Component: 150 - total flux cleaned = -7.1132e-06 Jy ! Component: 200 - total flux cleaned = -7.2746e-06 Jy ! Total flux subtracted in 200 components = -7.2746e-06 Jy ! Clean residual min=-0.002158 max=0.001648 Jy/beam ! Clean residual mean=-0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.109307 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.109307 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=13.15 mas, bpa=19.8 degrees ! Estimated noise=833.966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358952 Jy ! Component: 100 - total flux cleaned = -0.00046246 Jy ! Component: 150 - total flux cleaned = -0.000480212 Jy ! Component: 200 - total flux cleaned = -0.000479421 Jy ! Total flux subtracted in 200 components = -0.000479421 Jy ! Clean residual min=-0.002296 max=0.001822 Jy/beam ! Clean residual mean=-0.000005 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.108827 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.108827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085519Jy sigma=0.000762 ! Fit after self-cal, rms=0.085516Jy sigma=0.000762 wmodel J2318-1659_S_2014_08_05_pus_map.mod ! Writing 53 model components to file: J2318-1659_S_2014_08_05_pus_map.mod wobs J2318-1659_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2318-1659_S_2014_08_05_pus_uvs.fits wwins J2318-1659_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J2318-1659_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100661 Jy ! Component: 100 - total flux cleaned = -0.00158162 Jy ! Component: 150 - total flux cleaned = -0.00188631 Jy ! Component: 200 - total flux cleaned = -0.00221033 Jy ! Component: 250 - total flux cleaned = -0.00252177 Jy ! Component: 300 - total flux cleaned = -0.00273194 Jy ! Component: 350 - total flux cleaned = -0.00299375 Jy ! Component: 400 - total flux cleaned = -0.00321993 Jy ! Component: 450 - total flux cleaned = -0.00346832 Jy ! Component: 500 - total flux cleaned = -0.00360327 Jy ! Component: 550 - total flux cleaned = -0.00381498 Jy ! Component: 600 - total flux cleaned = -0.00402222 Jy ! Component: 650 - total flux cleaned = -0.0041745 Jy ! Component: 700 - total flux cleaned = -0.00429924 Jy ! Component: 750 - total flux cleaned = -0.00442263 Jy ! Component: 800 - total flux cleaned = -0.00454396 Jy ! Component: 850 - total flux cleaned = -0.00468711 Jy ! Component: 900 - total flux cleaned = -0.00468702 Jy ! Component: 950 - total flux cleaned = -0.00477999 Jy ! Component: 1000 - total flux cleaned = -0.00484863 Jy ! Component: 1050 - total flux cleaned = -0.00484822 Jy ! Component: 1100 - total flux cleaned = -0.00480336 Jy ! Component: 1150 - total flux cleaned = -0.00482559 Jy ! Component: 1200 - total flux cleaned = -0.00489073 Jy ! Component: 1250 - total flux cleaned = -0.00497679 Jy ! Component: 1300 - total flux cleaned = -0.00499792 Jy ! Component: 1350 - total flux cleaned = -0.00504034 Jy ! Component: 1400 - total flux cleaned = -0.00514448 Jy ! Component: 1450 - total flux cleaned = -0.00518554 Jy ! Component: 1500 - total flux cleaned = -0.00514502 Jy ! Component: 1550 - total flux cleaned = -0.00520545 Jy ! Component: 1600 - total flux cleaned = -0.00524504 Jy ! Component: 1650 - total flux cleaned = -0.00522515 Jy ! Component: 1700 - total flux cleaned = -0.00528384 Jy ! Component: 1750 - total flux cleaned = -0.00532242 Jy ! Component: 1800 - total flux cleaned = -0.0052843 Jy ! Component: 1850 - total flux cleaned = -0.00536015 Jy ! Component: 1900 - total flux cleaned = -0.00534159 Jy ! Component: 1950 - total flux cleaned = -0.00539732 Jy ! Component: 2000 - total flux cleaned = -0.00536051 Jy ! Component: 2050 - total flux cleaned = -0.0053425 Jy ! Component: 2100 - total flux cleaned = -0.00530655 Jy ! Component: 2150 - total flux cleaned = -0.00532438 Jy ! Component: 2200 - total flux cleaned = -0.00530638 Jy ! Component: 2250 - total flux cleaned = -0.00521851 Jy ! Component: 2300 - total flux cleaned = -0.00520126 Jy ! Component: 2350 - total flux cleaned = -0.00521877 Jy ! Component: 2400 - total flux cleaned = -0.00511622 Jy ! Component: 2450 - total flux cleaned = -0.00511635 Jy ! Component: 2500 - total flux cleaned = -0.00508266 Jy ! Component: 2550 - total flux cleaned = -0.00504945 Jy ! Component: 2600 - total flux cleaned = -0.00506611 Jy ! Component: 2650 - total flux cleaned = -0.00504958 Jy ! Component: 2700 - total flux cleaned = -0.00506577 Jy ! Component: 2750 - total flux cleaned = -0.00506579 Jy ! Component: 2800 - total flux cleaned = -0.00511381 Jy ! Component: 2850 - total flux cleaned = -0.00511386 Jy ! Component: 2900 - total flux cleaned = -0.00509802 Jy ! Component: 2950 - total flux cleaned = -0.00512934 Jy ! Component: 3000 - total flux cleaned = -0.00511359 Jy ! Component: 3050 - total flux cleaned = -0.00511338 Jy ! Component: 3100 - total flux cleaned = -0.0050673 Jy ! Component: 3150 - total flux cleaned = -0.00511308 Jy ! Component: 3200 - total flux cleaned = -0.00506756 Jy ! Component: 3250 - total flux cleaned = -0.0050377 Jy ! Component: 3300 - total flux cleaned = -0.00503782 Jy ! Component: 3350 - total flux cleaned = -0.00505292 Jy ! Component: 3400 - total flux cleaned = -0.00502342 Jy ! Component: 3450 - total flux cleaned = -0.0050673 Jy ! Component: 3500 - total flux cleaned = -0.00502366 Jy ! Component: 3550 - total flux cleaned = -0.00506705 Jy ! Component: 3600 - total flux cleaned = -0.00503824 Jy ! Component: 3650 - total flux cleaned = -0.00502393 Jy ! Component: 3700 - total flux cleaned = -0.00505226 Jy ! Component: 3750 - total flux cleaned = -0.00505216 Jy ! Component: 3800 - total flux cleaned = -0.00510818 Jy ! Component: 3850 - total flux cleaned = -0.00509412 Jy ! Component: 3900 - total flux cleaned = -0.00505261 Jy ! Component: 3950 - total flux cleaned = -0.00507999 Jy ! Component: 4000 - total flux cleaned = -0.00508011 Jy ! Component: 4050 - total flux cleaned = -0.00513431 Jy ! Total flux subtracted in 4096 components = -0.00513415 Jy ! Clean residual min=-0.000714 max=0.000778 Jy/beam ! Clean residual mean=-0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.103693 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 309 components and 0.103693 Jy ![Exited script file: muppet] wmap "J2318-1659_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.993 x 13.15 at 19.8 degrees (North through East) ! Clean map min=-0.0022985 max=0.1021 Jy/beam ! Writing clean map to FITS file: J2318-1659_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102103 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259336 device "J2318-1659_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2318-1659_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.761986 0.761986 1.52397 3.04794 6.09589 12.1918 24.3835 48.7671 97.5342 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.993 x 13.15 at 19.8 degrees (North through East) ! Clean map min=-0.0022985 max=0.1021 Jy/beam quit ! Quitting program ! Log file J2318-1659_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:41:03 2016