! Started logfile: J2243-2544_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:39:46 2016 obs J2243-2544_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2243-2544_S_2014_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.738889 visibilities/baseline/integration-bin. ! Found source: J2243-2544 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2243-2544_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.788556Jy sigma=0.006464 ! Fit after self-cal, rms=0.727051Jy sigma=0.006031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=11.62 mas, bpa=19.52 degrees ! Estimated noise=1336.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209557 Jy ! Component: 100 - total flux cleaned = 0.276582 Jy ! Total flux subtracted in 100 components = 0.276582 Jy ! Clean residual min=-0.019261 max=0.035577 Jy/beam ! Clean residual mean=-0.000006 rms=0.006575 Jy/beam ! Combined flux in latest and established models = 0.276582 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.276582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194319Jy sigma=0.001190 ! Fit after self-cal, rms=0.194140Jy sigma=0.001189 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=13.4 mas, bpa=18.65 degrees ! Estimated noise=996.624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580228 Jy ! Component: 100 - total flux cleaned = 0.0899408 Jy ! Component: 150 - total flux cleaned = 0.108719 Jy ! Component: 200 - total flux cleaned = 0.120126 Jy ! Total flux subtracted in 200 components = 0.120126 Jy ! Clean residual min=-0.013894 max=0.035799 Jy/beam ! Clean residual mean=-0.000064 rms=0.004953 Jy/beam ! Combined flux in latest and established models = 0.396708 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 74 components and 0.396708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173350Jy sigma=0.000976 ! Fit after self-cal, rms=0.173094Jy sigma=0.000974 ! Inverting map ! Added new window around map position (9, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305701 Jy ! Component: 100 - total flux cleaned = 0.0422482 Jy ! Component: 150 - total flux cleaned = 0.0474738 Jy ! Component: 200 - total flux cleaned = 0.0506733 Jy ! Total flux subtracted in 200 components = 0.0506733 Jy ! Clean residual min=-0.011507 max=0.020276 Jy/beam ! Clean residual mean=-0.000032 rms=0.003489 Jy/beam ! Combined flux in latest and established models = 0.447381 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 107 components and 0.447381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166000Jy sigma=0.000919 ! Fit after self-cal, rms=0.165343Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 1.11 KP 1.08 ! LA 1.09 MK 1.00* NL 0.86 OV 0.98 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.18 KP 1.04 ! LA 1.05 MK 1.00* NL 0.94 OV 1.02 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.22 HN 1.15 KP 0.92 ! LA 0.84 MK 1.00* NL 1.00 OV 0.94 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.14 KP 0.88 ! LA 0.81 MK 1.00* NL 1.11 OV 1.00 ! PT 1.05 SC 1.01 ! ! ! Fit before self-cal, rms=0.165343Jy sigma=0.000910 ! Fit after self-cal, rms=0.146579Jy sigma=0.000846 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=13.62 mas, bpa=19.05 degrees ! Estimated noise=1000.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749689 Jy ! Component: 100 - total flux cleaned = 0.00885746 Jy ! Component: 150 - total flux cleaned = 0.00998648 Jy ! Component: 200 - total flux cleaned = 0.0107601 Jy ! Total flux subtracted in 200 components = 0.0107601 Jy ! Clean residual min=-0.010699 max=0.013939 Jy/beam ! Clean residual mean=-0.000018 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.458141 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.458142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145295Jy sigma=0.000836 ! Fit after self-cal, rms=0.145227Jy sigma=0.000835 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145227Jy sigma=0.000835 ! Fit after self-cal, rms=0.150908Jy sigma=0.000784 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.015 mas, bmaj=13.45 mas, bpa=18.52 degrees ! Estimated noise=1007.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627356 Jy ! Component: 100 - total flux cleaned = 0.00143724 Jy ! Component: 150 - total flux cleaned = 0.00185531 Jy ! Component: 200 - total flux cleaned = 0.00198218 Jy ! Total flux subtracted in 200 components = 0.00198218 Jy ! Clean residual min=-0.007090 max=0.006334 Jy/beam ! Clean residual mean=-0.000041 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.460124 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 152 components and 0.460124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150601Jy sigma=0.000780 ! Fit after self-cal, rms=0.150634Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013837 Jy ! Component: 100 - total flux cleaned = 0.000194362 Jy ! Component: 150 - total flux cleaned = 0.000301414 Jy ! Component: 200 - total flux cleaned = 0.000486484 Jy ! Total flux subtracted in 200 components = 0.000486484 Jy ! Clean residual min=-0.006699 max=0.005874 Jy/beam ! Clean residual mean=-0.000040 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.46061 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 174 components and 0.46061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150495Jy sigma=0.000778 ! Fit after self-cal, rms=0.150508Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150508Jy sigma=0.000778 ! Fit after self-cal, rms=0.157014Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=13.49 mas, bpa=18.48 degrees ! Estimated noise=1007.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174311 Jy ! Component: 100 - total flux cleaned = -0.00154947 Jy ! Component: 150 - total flux cleaned = -0.00155167 Jy ! Component: 200 - total flux cleaned = -0.00155489 Jy ! Total flux subtracted in 200 components = -0.00155489 Jy ! Clean residual min=-0.006103 max=0.005503 Jy/beam ! Clean residual mean=-0.000043 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.459055 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 193 components and 0.459055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156891Jy sigma=0.000775 ! Fit after self-cal, rms=0.156901Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168572 Jy ! Component: 100 - total flux cleaned = 5.44203e-05 Jy ! Component: 150 - total flux cleaned = 5.28631e-05 Jy ! Component: 200 - total flux cleaned = 5.27469e-05 Jy ! Total flux subtracted in 200 components = 5.27469e-05 Jy ! Clean residual min=-0.005877 max=0.005419 Jy/beam ! Clean residual mean=-0.000042 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.459108 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 201 components and 0.459108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156829Jy sigma=0.000774 ! Fit after self-cal, rms=0.156845Jy sigma=0.000774 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156845Jy sigma=0.000774 ! Fit after self-cal, rms=0.160125Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.435 mas, bmaj=20.72 mas, bpa=9.552 degrees ! Estimated noise=1115.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000967615 Jy ! Component: 100 - total flux cleaned = -0.00125324 Jy ! Component: 150 - total flux cleaned = -0.00114294 Jy ! Component: 200 - total flux cleaned = -0.00104562 Jy ! Total flux subtracted in 200 components = -0.00104562 Jy ! Clean residual min=-0.006956 max=0.006534 Jy/beam ! Clean residual mean=-0.000060 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.458062 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 217 components and 0.458062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160091Jy sigma=0.000773 ! Fit after self-cal, rms=0.160108Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255238 Jy ! Component: 100 - total flux cleaned = -5.93685e-05 Jy ! Component: 150 - total flux cleaned = 2.75469e-05 Jy ! Component: 200 - total flux cleaned = 6.73792e-05 Jy ! Total flux subtracted in 200 components = 6.73792e-05 Jy ! Clean residual min=-0.006802 max=0.006459 Jy/beam ! Clean residual mean=-0.000059 rms=0.001966 Jy/beam ! Combined flux in latest and established models = 0.45813 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 221 components and 0.45813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160087Jy sigma=0.000773 ! Fit after self-cal, rms=0.160093Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=13.51 mas, bpa=18.47 degrees ! Estimated noise=1008.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.025 x 13.51 at 18.47 degrees (North through East) ! Clean map min=-0.0051639 max=0.27068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=11.67 mas, bpa=19.33 degrees ! Estimated noise=1374.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214592 Jy ! Component: 100 - total flux cleaned = 0.283584 Jy ! Component: 150 - total flux cleaned = 0.325049 Jy ! Component: 200 - total flux cleaned = 0.35393 Jy ! Total flux subtracted in 200 components = 0.35393 Jy ! Clean residual min=-0.010552 max=0.016384 Jy/beam ! Clean residual mean=-0.000031 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.35393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.35393 Jy ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=13.51 mas, bpa=18.47 degrees ! Estimated noise=1008.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303454 Jy ! Component: 100 - total flux cleaned = 0.0500376 Jy ! Component: 150 - total flux cleaned = 0.06348 Jy ! Component: 200 - total flux cleaned = 0.0730278 Jy ! Total flux subtracted in 200 components = 0.0730278 Jy ! Clean residual min=-0.006774 max=0.007176 Jy/beam ! Clean residual mean=-0.000055 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.426958 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 116 components and 0.426958 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.435 mas, bmaj=20.72 mas, bpa=9.552 degrees ! Estimated noise=1115.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0098387 Jy ! Component: 100 - total flux cleaned = 0.0164264 Jy ! Component: 150 - total flux cleaned = 0.020965 Jy ! Component: 200 - total flux cleaned = 0.0241648 Jy ! Total flux subtracted in 200 components = 0.0241648 Jy ! Clean residual min=-0.006801 max=0.005991 Jy/beam ! Clean residual mean=-0.000065 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.451123 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022872 Jy ! Component: 100 - total flux cleaned = 0.00394278 Jy ! Component: 150 - total flux cleaned = 0.00475241 Jy ! Component: 200 - total flux cleaned = 0.00520181 Jy ! Total flux subtracted in 200 components = 0.00520181 Jy ! Clean residual min=-0.006440 max=0.006226 Jy/beam ! Clean residual mean=-0.000059 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.456325 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 201 components and 0.456324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=13.51 mas, bpa=18.47 degrees ! Estimated noise=1008.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970829 Jy ! Component: 100 - total flux cleaned = 0.00132216 Jy ! Component: 150 - total flux cleaned = 0.00150374 Jy ! Component: 200 - total flux cleaned = 0.00150292 Jy ! Total flux subtracted in 200 components = 0.00150292 Jy ! Clean residual min=-0.004803 max=0.005105 Jy/beam ! Clean residual mean=-0.000037 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.457827 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 220 components and 0.457827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160159Jy sigma=0.000772 ! Fit after self-cal, rms=0.160212Jy sigma=0.000772 wmodel J2243-2544_S_2014_08_05_pus_map.mod ! Writing 220 model components to file: J2243-2544_S_2014_08_05_pus_map.mod wobs J2243-2544_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2243-2544_S_2014_08_05_pus_uvs.fits wwins J2243-2544_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J2243-2544_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105779 Jy ! Component: 100 - total flux cleaned = 0.000592071 Jy ! Component: 150 - total flux cleaned = 0.0012845 Jy ! Component: 200 - total flux cleaned = 0.00194164 Jy ! Component: 250 - total flux cleaned = 0.00235948 Jy ! Component: 300 - total flux cleaned = 0.00276321 Jy ! Component: 350 - total flux cleaned = 0.00328396 Jy ! Component: 400 - total flux cleaned = 0.00372169 Jy ! Component: 450 - total flux cleaned = 0.00402302 Jy ! Component: 500 - total flux cleaned = 0.00425738 Jy ! Component: 550 - total flux cleaned = 0.0044272 Jy ! Component: 600 - total flux cleaned = 0.00448107 Jy ! Component: 650 - total flux cleaned = 0.00432061 Jy ! Component: 700 - total flux cleaned = 0.00442644 Jy ! Component: 750 - total flux cleaned = 0.00406916 Jy ! Component: 800 - total flux cleaned = 0.00406964 Jy ! Component: 850 - total flux cleaned = 0.0038254 Jy ! Component: 900 - total flux cleaned = 0.00363535 Jy ! Component: 950 - total flux cleaned = 0.00349609 Jy ! Component: 1000 - total flux cleaned = 0.00335939 Jy ! Component: 1050 - total flux cleaned = 0.00313705 Jy ! Component: 1100 - total flux cleaned = 0.0030068 Jy ! Component: 1150 - total flux cleaned = 0.00275094 Jy ! Component: 1200 - total flux cleaned = 0.00258282 Jy ! Component: 1250 - total flux cleaned = 0.00225542 Jy ! Component: 1300 - total flux cleaned = 0.00201479 Jy ! Component: 1350 - total flux cleaned = 0.00165891 Jy ! Component: 1400 - total flux cleaned = 0.00138805 Jy ! Component: 1450 - total flux cleaned = 0.00119779 Jy ! Component: 1500 - total flux cleaned = 0.000861742 Jy ! Component: 1550 - total flux cleaned = 0.000678231 Jy ! Component: 1600 - total flux cleaned = 0.000389203 Jy ! Component: 1650 - total flux cleaned = 0.000140858 Jy ! Component: 1700 - total flux cleaned = 7.12719e-05 Jy ! Component: 1750 - total flux cleaned = -0.000238384 Jy ! Component: 1800 - total flux cleaned = -0.000373866 Jy ! Component: 1850 - total flux cleaned = -0.000673583 Jy ! Component: 1900 - total flux cleaned = -0.000805033 Jy ! Component: 1950 - total flux cleaned = -0.00106376 Jy ! Component: 2000 - total flux cleaned = -0.001255 Jy ! Component: 2050 - total flux cleaned = -0.00150634 Jy ! Component: 2100 - total flux cleaned = -0.00172281 Jy ! Component: 2150 - total flux cleaned = -0.00193739 Jy ! Component: 2200 - total flux cleaned = -0.00205812 Jy ! Component: 2250 - total flux cleaned = -0.00211782 Jy ! Component: 2300 - total flux cleaned = -0.00238206 Jy ! Component: 2350 - total flux cleaned = -0.0024968 Jy ! Component: 2400 - total flux cleaned = -0.0025825 Jy ! Component: 2450 - total flux cleaned = -0.00283568 Jy ! Component: 2500 - total flux cleaned = -0.00291891 Jy ! Component: 2550 - total flux cleaned = -0.00308377 Jy ! Component: 2600 - total flux cleaned = -0.00319272 Jy ! Component: 2650 - total flux cleaned = -0.00338076 Jy ! Component: 2700 - total flux cleaned = -0.00348715 Jy ! Component: 2750 - total flux cleaned = -0.00374898 Jy ! Component: 2800 - total flux cleaned = -0.00385215 Jy ! Component: 2850 - total flux cleaned = -0.00405645 Jy ! Component: 2900 - total flux cleaned = -0.00418261 Jy ! Component: 2950 - total flux cleaned = -0.00440731 Jy ! Component: 3000 - total flux cleaned = -0.00462897 Jy ! Component: 3050 - total flux cleaned = -0.00470197 Jy ! Component: 3100 - total flux cleaned = -0.00487114 Jy ! Component: 3150 - total flux cleaned = -0.00506251 Jy ! Component: 3200 - total flux cleaned = -0.00520437 Jy ! Component: 3250 - total flux cleaned = -0.00541505 Jy ! Component: 3300 - total flux cleaned = -0.00560019 Jy ! Component: 3350 - total flux cleaned = -0.00582939 Jy ! Component: 3400 - total flux cleaned = -0.00598822 Jy ! Component: 3450 - total flux cleaned = -0.00621242 Jy ! Component: 3500 - total flux cleaned = -0.00641237 Jy ! Component: 3550 - total flux cleaned = -0.00652235 Jy ! Component: 3600 - total flux cleaned = -0.00678382 Jy ! Component: 3650 - total flux cleaned = -0.00695639 Jy ! Component: 3700 - total flux cleaned = -0.00704191 Jy ! Component: 3750 - total flux cleaned = -0.0072747 Jy ! Component: 3800 - total flux cleaned = -0.00746329 Jy ! Component: 3850 - total flux cleaned = -0.00769165 Jy ! Component: 3900 - total flux cleaned = -0.00783571 Jy ! Component: 3950 - total flux cleaned = -0.00803952 Jy ! Component: 4000 - total flux cleaned = -0.00822125 Jy ! Component: 4050 - total flux cleaned = -0.00842125 Jy ! Total flux subtracted in 4096 components = -0.00863973 Jy ! Clean residual min=-0.001248 max=0.001489 Jy/beam ! Clean residual mean=-0.000011 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.449188 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 532 components and 0.449188 Jy ![Exited script file: muppet] wmap "J2243-2544_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.025 x 13.51 at 18.47 degrees (North through East) ! Clean map min=-0.0031615 max=0.27628 Jy/beam ! Writing clean map to FITS file: J2243-2544_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276275 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000398335 device "J2243-2544_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2243-2544_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.432542 0.432542 0.865084 1.73017 3.46034 6.92067 13.8413 27.6827 55.3654 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.025 x 13.51 at 18.47 degrees (North through East) ! Clean map min=-0.0031615 max=0.27628 Jy/beam quit ! Quitting program ! Log file J2243-2544_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:39:51 2016