! Started logfile: J2209+5158_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:39:31 2016 obs J2209+5158_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2209+5158_S_2014_08_05_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.758201 visibilities/baseline/integration-bin. ! Found source: J2209+5158 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2209+5158_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.834663Jy sigma=0.009340 ! Fit after self-cal, rms=0.831434Jy sigma=0.009305 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=6 mas, bpa=47.69 degrees ! Estimated noise=938.068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12554 Jy ! Component: 100 - total flux cleaned = 0.168746 Jy ! Total flux subtracted in 100 components = 0.168746 Jy ! Clean residual min=-0.007150 max=0.019169 Jy/beam ! Clean residual mean=-0.000063 rms=0.002557 Jy/beam ! Combined flux in latest and established models = 0.168746 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.168746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091227Jy sigma=0.000938 ! Fit after self-cal, rms=0.090981Jy sigma=0.000936 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221458 Jy ! Component: 100 - total flux cleaned = 0.0359592 Jy ! Total flux subtracted in 100 components = 0.0359592 Jy ! Clean residual min=-0.005527 max=0.008790 Jy/beam ! Clean residual mean=-0.000031 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.204705 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 38 components and 0.204705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082574Jy sigma=0.000837 ! Fit after self-cal, rms=0.082479Jy sigma=0.000836 ! Inverting map ! Added new window around map position (-6.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104037 Jy ! Component: 100 - total flux cleaned = 0.0176074 Jy ! Total flux subtracted in 100 components = 0.0176074 Jy ! Clean residual min=-0.005193 max=0.005003 Jy/beam ! Clean residual mean=-0.000014 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.222312 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.222312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080301Jy sigma=0.000812 ! Fit after self-cal, rms=0.080263Jy sigma=0.000812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.92 mas, bmaj=6.904 mas, bpa=46.07 degrees ! Estimated noise=601.409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853071 Jy ! Component: 100 - total flux cleaned = 0.014015 Jy ! Component: 150 - total flux cleaned = 0.0178495 Jy ! Component: 200 - total flux cleaned = 0.0205965 Jy ! Total flux subtracted in 200 components = 0.0205965 Jy ! Clean residual min=-0.003784 max=0.003905 Jy/beam ! Clean residual mean=0.000021 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.242909 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 126 components and 0.242909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078994Jy sigma=0.000802 ! Fit after self-cal, rms=0.078969Jy sigma=0.000801 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.83 HN 1.04 KP 1.07 ! LA 1.11 MK 1.00* NL 0.95 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.10 KP 1.03 ! LA 1.07 MK 1.00* NL 1.03 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.13 HN 1.07 KP 0.91 ! LA 0.83 MK 1.00* NL 1.01 OV 0.95 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 1.02 KP 0.90 ! LA 0.81 MK 1.00* NL 1.08 OV 1.00 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.078969Jy sigma=0.000801 ! Fit after self-cal, rms=0.074766Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.939 mas, bmaj=6.947 mas, bpa=46.1 degrees ! Estimated noise=602.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315656 Jy ! Component: 100 - total flux cleaned = 0.000344983 Jy ! Component: 150 - total flux cleaned = 0.00034295 Jy ! Component: 200 - total flux cleaned = 0.000274198 Jy ! Total flux subtracted in 200 components = 0.000274198 Jy ! Clean residual min=-0.002263 max=0.002396 Jy/beam ! Clean residual mean=0.000015 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.243183 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.243183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074737Jy sigma=0.000770 ! Fit after self-cal, rms=0.074721Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074721Jy sigma=0.000770 ! Fit after self-cal, rms=0.074255Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.935 mas, bmaj=6.961 mas, bpa=45.38 degrees ! Estimated noise=602.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376129 Jy ! Component: 100 - total flux cleaned = -0.000536472 Jy ! Component: 150 - total flux cleaned = -0.000609004 Jy ! Component: 200 - total flux cleaned = -0.000668226 Jy ! Total flux subtracted in 200 components = -0.000668226 Jy ! Clean residual min=-0.001844 max=0.001937 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.242515 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 153 components and 0.242515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074241Jy sigma=0.000765 ! Fit after self-cal, rms=0.074249Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.92054e-05 Jy ! Component: 100 - total flux cleaned = -0.000114744 Jy ! Component: 150 - total flux cleaned = -0.000135412 Jy ! Component: 200 - total flux cleaned = -0.000153882 Jy ! Total flux subtracted in 200 components = -0.000153882 Jy ! Clean residual min=-0.001870 max=0.001932 Jy/beam ! Clean residual mean=0.000004 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.242361 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 162 components and 0.242361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074245Jy sigma=0.000765 ! Fit after self-cal, rms=0.074246Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074246Jy sigma=0.000765 ! Fit after self-cal, rms=0.074369Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.937 mas, bmaj=6.97 mas, bpa=45.33 degrees ! Estimated noise=602.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319099 Jy ! Component: 100 - total flux cleaned = -0.000393058 Jy ! Component: 150 - total flux cleaned = -0.000443756 Jy ! Component: 200 - total flux cleaned = -0.000487968 Jy ! Total flux subtracted in 200 components = -0.000487968 Jy ! Clean residual min=-0.001857 max=0.001954 Jy/beam ! Clean residual mean=0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.241873 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 165 components and 0.241873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074364Jy sigma=0.000765 ! Fit after self-cal, rms=0.074368Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.26397e-05 Jy ! Component: 100 - total flux cleaned = -9.09957e-05 Jy ! Component: 150 - total flux cleaned = -0.000125028 Jy ! Component: 200 - total flux cleaned = -0.000149641 Jy ! Total flux subtracted in 200 components = -0.000149641 Jy ! Clean residual min=-0.001867 max=0.001950 Jy/beam ! Clean residual mean=0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.241723 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 171 components and 0.241723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074366Jy sigma=0.000765 ! Fit after self-cal, rms=0.074366Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074366Jy sigma=0.000765 ! Fit after self-cal, rms=0.074440Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.724 mas, bmaj=9.409 mas, bpa=87.17 degrees ! Estimated noise=674.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.845e-06 Jy ! Component: 100 - total flux cleaned = -3.19062e-07 Jy ! Component: 150 - total flux cleaned = 1.45984e-05 Jy ! Component: 200 - total flux cleaned = 1.45896e-05 Jy ! Total flux subtracted in 200 components = 1.45896e-05 Jy ! Clean residual min=-0.002076 max=0.002533 Jy/beam ! Clean residual mean=0.000008 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.241738 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 179 components and 0.241738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074440Jy sigma=0.000765 ! Fit after self-cal, rms=0.074441Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.5, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002547 Jy ! Component: 100 - total flux cleaned = 0.00408935 Jy ! Component: 150 - total flux cleaned = 0.00511205 Jy ! Component: 200 - total flux cleaned = 0.00561041 Jy ! Total flux subtracted in 200 components = 0.00561041 Jy ! Clean residual min=-0.001590 max=0.001240 Jy/beam ! Clean residual mean=0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.247348 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 231 components and 0.247348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074373Jy sigma=0.000764 ! Fit after self-cal, rms=0.074372Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.939 mas, bmaj=6.976 mas, bpa=45.31 degrees ! Estimated noise=602.874 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.939 x 6.976 at 45.31 degrees (North through East) ! Clean map min=-0.001631 max=0.17001 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=6.051 mas, bpa=46.8 degrees ! Estimated noise=946.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126385 Jy ! Component: 100 - total flux cleaned = 0.169835 Jy ! Component: 150 - total flux cleaned = 0.191132 Jy ! Component: 200 - total flux cleaned = 0.204667 Jy ! Total flux subtracted in 200 components = 0.204667 Jy ! Clean residual min=-0.004449 max=0.007431 Jy/beam ! Clean residual mean=-0.000031 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.204667 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.204667 Jy ! Inverting map and beam ! Estimated beam: bmin=4.939 mas, bmaj=6.976 mas, bpa=45.31 degrees ! Estimated noise=602.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01315 Jy ! Component: 100 - total flux cleaned = 0.0210684 Jy ! Component: 150 - total flux cleaned = 0.0260894 Jy ! Component: 200 - total flux cleaned = 0.0294132 Jy ! Total flux subtracted in 200 components = 0.0294132 Jy ! Clean residual min=-0.002141 max=0.001990 Jy/beam ! Clean residual mean=-0.000006 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.23408 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 82 components and 0.23408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.724 mas, bmaj=9.409 mas, bpa=87.17 degrees ! Estimated noise=674.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345122 Jy ! Component: 100 - total flux cleaned = 0.00591649 Jy ! Component: 150 - total flux cleaned = 0.00785132 Jy ! Component: 200 - total flux cleaned = 0.00941355 Jy ! Total flux subtracted in 200 components = 0.00941355 Jy ! Clean residual min=-0.001764 max=0.001320 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.243493 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128331 Jy ! Component: 100 - total flux cleaned = 0.00230359 Jy ! Component: 150 - total flux cleaned = 0.00291485 Jy ! Component: 200 - total flux cleaned = 0.00332463 Jy ! Total flux subtracted in 200 components = 0.00332463 Jy ! Clean residual min=-0.001518 max=0.001159 Jy/beam ! Clean residual mean=0.000000 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.246818 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 177 components and 0.246818 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.939 mas, bmaj=6.976 mas, bpa=45.31 degrees ! Estimated noise=602.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186337 Jy ! Component: 100 - total flux cleaned = 0.000458554 Jy ! Component: 150 - total flux cleaned = 0.000629934 Jy ! Component: 200 - total flux cleaned = 0.000755267 Jy ! Total flux subtracted in 200 components = 0.000755267 Jy ! Clean residual min=-0.001691 max=0.001497 Jy/beam ! Clean residual mean=-0.000000 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.247573 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 204 components and 0.247573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074375Jy sigma=0.000764 ! Fit after self-cal, rms=0.074369Jy sigma=0.000764 wmodel J2209+5158_S_2014_08_05_pus_map.mod ! Writing 204 model components to file: J2209+5158_S_2014_08_05_pus_map.mod wobs J2209+5158_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2209+5158_S_2014_08_05_pus_uvs.fits wwins J2209+5158_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J2209+5158_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165052 Jy ! Component: 100 - total flux cleaned = -8.56513e-05 Jy ! Component: 150 - total flux cleaned = -0.000109752 Jy ! Component: 200 - total flux cleaned = -8.64152e-05 Jy ! Component: 250 - total flux cleaned = -0.000131046 Jy ! Component: 300 - total flux cleaned = -0.00010834 Jy ! Component: 350 - total flux cleaned = -8.66743e-05 Jy ! Component: 400 - total flux cleaned = -8.60212e-05 Jy ! Component: 450 - total flux cleaned = -6.52963e-05 Jy ! Component: 500 - total flux cleaned = -2.53967e-05 Jy ! Component: 550 - total flux cleaned = -4.52772e-05 Jy ! Component: 600 - total flux cleaned = -2.6271e-05 Jy ! Component: 650 - total flux cleaned = -8.36308e-05 Jy ! Component: 700 - total flux cleaned = -0.000139812 Jy ! Component: 750 - total flux cleaned = -0.000139223 Jy ! Component: 800 - total flux cleaned = -0.000139308 Jy ! Component: 850 - total flux cleaned = -0.000157049 Jy ! Component: 900 - total flux cleaned = -0.000192122 Jy ! Component: 950 - total flux cleaned = -0.000209065 Jy ! Component: 1000 - total flux cleaned = -0.000243099 Jy ! Component: 1050 - total flux cleaned = -0.000275906 Jy ! Component: 1100 - total flux cleaned = -0.00032502 Jy ! Component: 1150 - total flux cleaned = -0.000276285 Jy ! Component: 1200 - total flux cleaned = -0.000308332 Jy ! Component: 1250 - total flux cleaned = -0.000323842 Jy ! Component: 1300 - total flux cleaned = -0.000292867 Jy ! Component: 1350 - total flux cleaned = -0.000277693 Jy ! Component: 1400 - total flux cleaned = -0.000307972 Jy ! Component: 1450 - total flux cleaned = -0.000248133 Jy ! Component: 1500 - total flux cleaned = -0.000263035 Jy ! Component: 1550 - total flux cleaned = -0.000248536 Jy ! Component: 1600 - total flux cleaned = -0.000248575 Jy ! Component: 1650 - total flux cleaned = -0.000220313 Jy ! Component: 1700 - total flux cleaned = -0.000192094 Jy ! Component: 1750 - total flux cleaned = -0.000205745 Jy ! Component: 1800 - total flux cleaned = -0.000164611 Jy ! Component: 1850 - total flux cleaned = -0.000164587 Jy ! Component: 1900 - total flux cleaned = -0.000137736 Jy ! Component: 1950 - total flux cleaned = -7.16174e-05 Jy ! Component: 2000 - total flux cleaned = -9.74942e-05 Jy ! Component: 2050 - total flux cleaned = -7.14005e-05 Jy ! Component: 2100 - total flux cleaned = -4.55969e-05 Jy ! Component: 2150 - total flux cleaned = 4.96414e-06 Jy ! Component: 2200 - total flux cleaned = 4.86594e-06 Jy ! Component: 2250 - total flux cleaned = 1.72706e-05 Jy ! Component: 2300 - total flux cleaned = 6.646e-05 Jy ! Component: 2350 - total flux cleaned = 4.23377e-05 Jy ! Component: 2400 - total flux cleaned = 9.02579e-05 Jy ! Component: 2450 - total flux cleaned = 0.000114058 Jy ! Component: 2500 - total flux cleaned = 7.85244e-05 Jy ! Component: 2550 - total flux cleaned = 9.02746e-05 Jy ! Component: 2600 - total flux cleaned = 0.000148243 Jy ! Component: 2650 - total flux cleaned = 0.000159934 Jy ! Component: 2700 - total flux cleaned = 0.000171514 Jy ! Component: 2750 - total flux cleaned = 0.000194046 Jy ! Component: 2800 - total flux cleaned = 0.000194143 Jy ! Component: 2850 - total flux cleaned = 0.000194227 Jy ! Component: 2900 - total flux cleaned = 0.000238183 Jy ! Component: 2950 - total flux cleaned = 0.000227253 Jy ! Component: 3000 - total flux cleaned = 0.000227357 Jy ! Component: 3050 - total flux cleaned = 0.000248978 Jy ! Component: 3100 - total flux cleaned = 0.000259585 Jy ! Component: 3150 - total flux cleaned = 0.000280642 Jy ! Component: 3200 - total flux cleaned = 0.000238689 Jy ! Component: 3250 - total flux cleaned = 0.000269947 Jy ! Component: 3300 - total flux cleaned = 0.000300879 Jy ! Component: 3350 - total flux cleaned = 0.000270113 Jy ! Component: 3400 - total flux cleaned = 0.000320945 Jy ! Component: 3450 - total flux cleaned = 0.000280626 Jy ! Component: 3500 - total flux cleaned = 0.00032066 Jy ! Component: 3550 - total flux cleaned = 0.000320701 Jy ! Component: 3600 - total flux cleaned = 0.000340474 Jy ! Component: 3650 - total flux cleaned = 0.000320949 Jy ! Component: 3700 - total flux cleaned = 0.000350113 Jy ! Component: 3750 - total flux cleaned = 0.000330772 Jy ! Component: 3800 - total flux cleaned = 0.000349838 Jy ! Component: 3850 - total flux cleaned = 0.000340213 Jy ! Component: 3900 - total flux cleaned = 0.000359156 Jy ! Component: 3950 - total flux cleaned = 0.000396771 Jy ! Component: 4000 - total flux cleaned = 0.000387358 Jy ! Component: 4050 - total flux cleaned = 0.000405983 Jy ! Total flux subtracted in 4096 components = 0.000415169 Jy ! Clean residual min=-0.000556 max=0.000614 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.247988 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 483 components and 0.247988 Jy ![Exited script file: muppet] wmap "J2209+5158_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.939 x 6.976 at 45.31 degrees (North through East) ! Clean map min=-0.001059 max=0.17075 Jy/beam ! Writing clean map to FITS file: J2209+5158_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170751 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164407 device "J2209+5158_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2209+5158_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.288854 0.288854 0.577708 1.15542 2.31083 4.62167 9.24333 18.4867 36.9733 73.9467 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.939 x 6.976 at 45.31 degrees (North through East) ! Clean map min=-0.001059 max=0.17075 Jy/beam quit ! Quitting program ! Log file J2209+5158_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:39:36 2016