! Started logfile: J2117+5431_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:39:16 2016 obs J2117+5431_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J2117+5431_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.677596 visibilities/baseline/integration-bin. ! Found source: J2117+5431 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2117+5431_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928527Jy sigma=0.010843 ! Fit after self-cal, rms=0.881645Jy sigma=0.010302 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=7.081 mas, bpa=34.39 degrees ! Estimated noise=769.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924296 Jy ! Component: 100 - total flux cleaned = 0.11259 Jy ! Total flux subtracted in 100 components = 0.11259 Jy ! Clean residual min=-0.003655 max=0.005667 Jy/beam ! Clean residual mean=-0.000017 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.11259 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.11259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072764Jy sigma=0.000789 ! Fit after self-cal, rms=0.072759Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.6 mas, bmaj=7.838 mas, bpa=34.66 degrees ! Estimated noise=504.977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00757839 Jy ! Component: 100 - total flux cleaned = 0.0115445 Jy ! Component: 150 - total flux cleaned = 0.0138327 Jy ! Component: 200 - total flux cleaned = 0.0152067 Jy ! Total flux subtracted in 200 components = 0.0152067 Jy ! Clean residual min=-0.002374 max=0.002387 Jy/beam ! Clean residual mean=0.000023 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.127797 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 56 components and 0.127797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071834Jy sigma=0.000781 ! Fit after self-cal, rms=0.071845Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.86 HN 1.04 KP 1.03 ! LA 1.11 MK 1.00* NL 0.99 OV 0.98 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.02 KP 1.02 ! LA 1.06 MK 1.00* NL 1.04 OV 1.03 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.16 HN 1.04 KP 0.90 ! LA 0.83 MK 1.00* NL 1.00 OV 0.95 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.02 KP 0.85 ! LA 0.81 MK 1.00* NL 1.07 OV 0.96 ! PT 1.02 SC 0.95 ! ! ! Fit before self-cal, rms=0.071845Jy sigma=0.000781 ! Fit after self-cal, rms=0.069272Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=7.887 mas, bpa=34.61 degrees ! Estimated noise=504.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706447 Jy ! Component: 100 - total flux cleaned = -0.000925044 Jy ! Component: 150 - total flux cleaned = -0.00101052 Jy ! Component: 200 - total flux cleaned = -0.00103635 Jy ! Total flux subtracted in 200 components = -0.00103635 Jy ! Clean residual min=-0.001659 max=0.001568 Jy/beam ! Clean residual mean=0.000009 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.126761 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.126761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069265Jy sigma=0.000766 ! Fit after self-cal, rms=0.069253Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069253Jy sigma=0.000766 ! Fit after self-cal, rms=0.069371Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.616 mas, bmaj=7.905 mas, bpa=34.49 degrees ! Estimated noise=503.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000296755 Jy ! Component: 100 - total flux cleaned = -0.000360482 Jy ! Component: 150 - total flux cleaned = -0.000366321 Jy ! Component: 200 - total flux cleaned = -0.000371698 Jy ! Total flux subtracted in 200 components = -0.000371698 Jy ! Clean residual min=-0.001371 max=0.001555 Jy/beam ! Clean residual mean=0.000008 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.126389 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.126389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069370Jy sigma=0.000765 ! Fit after self-cal, rms=0.069374Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (116.5, -112.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000979826 Jy ! Component: 100 - total flux cleaned = 0.00100891 Jy ! Component: 150 - total flux cleaned = 0.00106027 Jy ! Component: 200 - total flux cleaned = 0.00108175 Jy ! Total flux subtracted in 200 components = 0.00108175 Jy ! Clean residual min=-0.001328 max=0.001348 Jy/beam ! Clean residual mean=0.000006 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.127471 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.127471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069343Jy sigma=0.000764 ! Fit after self-cal, rms=0.069342Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069342Jy sigma=0.000764 ! Fit after self-cal, rms=0.069270Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.614 mas, bmaj=7.914 mas, bpa=34.49 degrees ! Estimated noise=503.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193723 Jy ! Component: 100 - total flux cleaned = 0.000193677 Jy ! Component: 150 - total flux cleaned = 0.000173652 Jy ! Component: 200 - total flux cleaned = 0.000173871 Jy ! Total flux subtracted in 200 components = 0.000173871 Jy ! Clean residual min=-0.001294 max=0.001294 Jy/beam ! Clean residual mean=0.000006 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.127645 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.127645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069258Jy sigma=0.000764 ! Fit after self-cal, rms=0.069259Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84629e-05 Jy ! Component: 100 - total flux cleaned = -1.79733e-05 Jy ! Component: 150 - total flux cleaned = -3.32765e-05 Jy ! Component: 200 - total flux cleaned = -3.28843e-05 Jy ! Total flux subtracted in 200 components = -3.28843e-05 Jy ! Clean residual min=-0.001285 max=0.001274 Jy/beam ! Clean residual mean=0.000006 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.127612 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.127612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069252Jy sigma=0.000764 ! Fit after self-cal, rms=0.069252Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069252Jy sigma=0.000764 ! Fit after self-cal, rms=0.069213Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.691 mas, bmaj=10.17 mas, bpa=53.13 degrees ! Estimated noise=570.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.04184e-05 Jy ! Component: 100 - total flux cleaned = 2.25108e-05 Jy ! Component: 150 - total flux cleaned = -1.13073e-05 Jy ! Component: 200 - total flux cleaned = -1.86684e-05 Jy ! Total flux subtracted in 200 components = -1.86684e-05 Jy ! Clean residual min=-0.001189 max=0.001290 Jy/beam ! Clean residual mean=0.000010 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.127593 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 0.127593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069212Jy sigma=0.000764 ! Fit after self-cal, rms=0.069212Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.83924e-05 Jy ! Component: 100 - total flux cleaned = -3.12442e-05 Jy ! Component: 150 - total flux cleaned = -1.79926e-05 Jy ! Component: 200 - total flux cleaned = -1.79474e-05 Jy ! Total flux subtracted in 200 components = -1.79474e-05 Jy ! Clean residual min=-0.001191 max=0.001307 Jy/beam ! Clean residual mean=0.000010 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.127575 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 0.127575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069211Jy sigma=0.000764 ! Fit after self-cal, rms=0.069211Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.613 mas, bmaj=7.915 mas, bpa=34.49 degrees ! Estimated noise=502.854 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.613 x 7.915 at 34.49 degrees (North through East) ! Clean map min=-0.0012743 max=0.11877 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=7.168 mas, bpa=34.3 degrees ! Estimated noise=770.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924227 Jy ! Component: 100 - total flux cleaned = 0.1126 Jy ! Component: 150 - total flux cleaned = 0.118129 Jy ! Component: 200 - total flux cleaned = 0.120746 Jy ! Total flux subtracted in 200 components = 0.120746 Jy ! Clean residual min=-0.002437 max=0.002140 Jy/beam ! Clean residual mean=-0.000006 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.120746 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.120746 Jy ! Inverting map and beam ! Estimated beam: bmin=4.613 mas, bmaj=7.915 mas, bpa=34.49 degrees ! Estimated noise=502.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256858 Jy ! Component: 100 - total flux cleaned = 0.0041355 Jy ! Component: 150 - total flux cleaned = 0.00486285 Jy ! Component: 200 - total flux cleaned = 0.00525548 Jy ! Total flux subtracted in 200 components = 0.00525548 Jy ! Clean residual min=-0.001475 max=0.001417 Jy/beam ! Clean residual mean=0.000005 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.126001 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.126001 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.691 mas, bmaj=10.17 mas, bpa=53.13 degrees ! Estimated noise=570.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854551 Jy ! Component: 100 - total flux cleaned = 0.00129865 Jy ! Component: 150 - total flux cleaned = 0.00146135 Jy ! Component: 200 - total flux cleaned = 0.00153995 Jy ! Total flux subtracted in 200 components = 0.00153995 Jy ! Clean residual min=-0.001257 max=0.001391 Jy/beam ! Clean residual mean=0.000009 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.127541 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.30868e-05 Jy ! Component: 100 - total flux cleaned = 8.24608e-05 Jy ! Component: 150 - total flux cleaned = 0.000118091 Jy ! Component: 200 - total flux cleaned = 0.000139747 Jy ! Total flux subtracted in 200 components = 0.000139747 Jy ! Clean residual min=-0.001237 max=0.001380 Jy/beam ! Clean residual mean=0.000010 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.127681 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 80 components and 0.127681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.613 mas, bmaj=7.915 mas, bpa=34.49 degrees ! Estimated noise=502.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.89186e-05 Jy ! Component: 100 - total flux cleaned = -0.000148104 Jy ! Component: 150 - total flux cleaned = -0.000169212 Jy ! Component: 200 - total flux cleaned = -0.000188528 Jy ! Total flux subtracted in 200 components = -0.000188528 Jy ! Clean residual min=-0.001340 max=0.001354 Jy/beam ! Clean residual mean=0.000006 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.127492 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.127492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069221Jy sigma=0.000764 ! Fit after self-cal, rms=0.069219Jy sigma=0.000764 wmodel J2117+5431_S_2014_08_05_pus_map.mod ! Writing 96 model components to file: J2117+5431_S_2014_08_05_pus_map.mod wobs J2117+5431_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J2117+5431_S_2014_08_05_pus_uvs.fits wwins J2117+5431_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J2117+5431_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324923 Jy ! Component: 100 - total flux cleaned = 0.000526422 Jy ! Component: 150 - total flux cleaned = 0.000673221 Jy ! Component: 200 - total flux cleaned = 0.00077311 Jy ! Component: 250 - total flux cleaned = 0.000830757 Jy ! Component: 300 - total flux cleaned = 0.000905673 Jy ! Component: 350 - total flux cleaned = 0.000996335 Jy ! Component: 400 - total flux cleaned = 0.00106668 Jy ! Component: 450 - total flux cleaned = 0.00113478 Jy ! Component: 500 - total flux cleaned = 0.00128458 Jy ! Component: 550 - total flux cleaned = 0.00138245 Jy ! Component: 600 - total flux cleaned = 0.00147804 Jy ! Component: 650 - total flux cleaned = 0.00155616 Jy ! Component: 700 - total flux cleaned = 0.00169364 Jy ! Component: 750 - total flux cleaned = 0.00173851 Jy ! Component: 800 - total flux cleaned = 0.00184137 Jy ! Component: 850 - total flux cleaned = 0.00187005 Jy ! Component: 900 - total flux cleaned = 0.00189868 Jy ! Component: 950 - total flux cleaned = 0.0019405 Jy ! Component: 1000 - total flux cleaned = 0.00196786 Jy ! Component: 1050 - total flux cleaned = 0.00199479 Jy ! Component: 1100 - total flux cleaned = 0.00198124 Jy ! Component: 1150 - total flux cleaned = 0.00199437 Jy ! Component: 1200 - total flux cleaned = 0.00202031 Jy ! Component: 1250 - total flux cleaned = 0.00204584 Jy ! Component: 1300 - total flux cleaned = 0.00207102 Jy ! Component: 1350 - total flux cleaned = 0.00218202 Jy ! Component: 1400 - total flux cleaned = 0.00221846 Jy ! Component: 1450 - total flux cleaned = 0.00226654 Jy ! Component: 1500 - total flux cleaned = 0.0023498 Jy ! Component: 1550 - total flux cleaned = 0.00238503 Jy ! Component: 1600 - total flux cleaned = 0.00245461 Jy ! Component: 1650 - total flux cleaned = 0.00251174 Jy ! Component: 1700 - total flux cleaned = 0.00256819 Jy ! Component: 1750 - total flux cleaned = 0.00263529 Jy ! Component: 1800 - total flux cleaned = 0.00265721 Jy ! Component: 1850 - total flux cleaned = 0.00267921 Jy ! Component: 1900 - total flux cleaned = 0.00276572 Jy ! Component: 1950 - total flux cleaned = 0.00277644 Jy ! Component: 2000 - total flux cleaned = 0.00281887 Jy ! Component: 2050 - total flux cleaned = 0.00291292 Jy ! Component: 2100 - total flux cleaned = 0.00294419 Jy ! Component: 2150 - total flux cleaned = 0.00303637 Jy ! Component: 2200 - total flux cleaned = 0.00313755 Jy ! Component: 2250 - total flux cleaned = 0.00319757 Jy ! Component: 2300 - total flux cleaned = 0.00325707 Jy ! Component: 2350 - total flux cleaned = 0.00334546 Jy ! Component: 2400 - total flux cleaned = 0.00341344 Jy ! Component: 2450 - total flux cleaned = 0.00346156 Jy ! Component: 2500 - total flux cleaned = 0.00353785 Jy ! Component: 2550 - total flux cleaned = 0.00359454 Jy ! Component: 2600 - total flux cleaned = 0.00362263 Jy ! Component: 2650 - total flux cleaned = 0.00370623 Jy ! Component: 2700 - total flux cleaned = 0.00377982 Jy ! Component: 2750 - total flux cleaned = 0.00383437 Jy ! Component: 2800 - total flux cleaned = 0.00386152 Jy ! Component: 2850 - total flux cleaned = 0.00398679 Jy ! Component: 2900 - total flux cleaned = 0.004031 Jy ! Component: 2950 - total flux cleaned = 0.00405737 Jy ! Component: 3000 - total flux cleaned = 0.00414461 Jy ! Component: 3050 - total flux cleaned = 0.00420508 Jy ! Component: 3100 - total flux cleaned = 0.00422227 Jy ! Component: 3150 - total flux cleaned = 0.0042733 Jy ! Component: 3200 - total flux cleaned = 0.00434919 Jy ! Component: 3250 - total flux cleaned = 0.00435763 Jy ! Component: 3300 - total flux cleaned = 0.00442411 Jy ! Component: 3350 - total flux cleaned = 0.00444879 Jy ! Component: 3400 - total flux cleaned = 0.00450597 Jy ! Component: 3450 - total flux cleaned = 0.0045385 Jy ! Component: 3500 - total flux cleaned = 0.00459486 Jy ! Component: 3550 - total flux cleaned = 0.00461881 Jy ! Component: 3600 - total flux cleaned = 0.00465054 Jy ! Component: 3650 - total flux cleaned = 0.00468997 Jy ! Component: 3700 - total flux cleaned = 0.00472128 Jy ! Component: 3750 - total flux cleaned = 0.00475233 Jy ! Component: 3800 - total flux cleaned = 0.00480631 Jy ! Component: 3850 - total flux cleaned = 0.00483697 Jy ! Component: 3900 - total flux cleaned = 0.00484456 Jy ! Component: 3950 - total flux cleaned = 0.00490504 Jy ! Component: 4000 - total flux cleaned = 0.00491253 Jy ! Component: 4050 - total flux cleaned = 0.00492756 Jy ! Total flux subtracted in 4096 components = 0.00498689 Jy ! Clean residual min=-0.000473 max=0.000414 Jy/beam ! Clean residual mean=0.000003 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.132479 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 364 components and 0.132479 Jy ![Exited script file: muppet] wmap "J2117+5431_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.613 x 7.915 at 34.49 degrees (North through East) ! Clean map min=-0.00089555 max=0.11902 Jy/beam ! Writing clean map to FITS file: J2117+5431_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119021 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132496 device "J2117+5431_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J2117+5431_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333964 0.333964 0.667929 1.33586 2.67172 5.34343 10.6869 21.3737 42.7474 85.4949 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.613 x 7.915 at 34.49 degrees (North through East) ! Clean map min=-0.00089555 max=0.11902 Jy/beam quit ! Quitting program ! Log file J2117+5431_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:39:21 2016