! Started logfile: J1926+7706_X_2014_08_05_pus_uvs.log on Sat Nov 12 21:15:55 2016
obs J1926+7706_X_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1926+7706_X_2014_08_05_pus_uva.fits
! AN table 1: 102 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776035 visibilities/baseline/integration-bin.
! Found source: J1926+7706
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 414 lines of history.
! 
! Reading 42744 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1926+7706_X_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.879526Jy  sigma=0.009955
! Fit after  self-cal, rms=0.857933Jy  sigma=0.009714
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8891 mas, bmaj=2.949 mas, bpa=76.82 degrees
! Estimated noise=695.556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10885 Jy
! Component: 100  -  total flux cleaned = 0.133478 Jy
! Total flux subtracted in 100 components = 0.133478 Jy
! Clean residual min=-0.006514 max=0.009155 Jy/beam
! Clean residual mean=-0.000004 rms=0.001819 Jy/beam
! Combined flux in latest and established models = 0.133478 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.133478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078492Jy  sigma=0.000841
! Fit after  self-cal, rms=0.078482Jy  sigma=0.000841
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=3.203 mas, bpa=75.76 degrees
! Estimated noise=305.628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151232 Jy
! Component: 100  -  total flux cleaned = 0.0227518 Jy
! Component: 150  -  total flux cleaned = 0.0273917 Jy
! Component: 200  -  total flux cleaned = 0.0305344 Jy
! Total flux subtracted in 200 components = 0.0305344 Jy
! Clean residual min=-0.005772 max=0.007082 Jy/beam
! Clean residual mean=0.000010 rms=0.001607 Jy/beam
! Combined flux in latest and established models = 0.164013 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 48 components and 0.164013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075563Jy  sigma=0.000808
! Fit after  self-cal, rms=0.075536Jy  sigma=0.000808
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.11     HN        1.09     KP        0.90     
!   LA        1.02     MK        1.00*    NL        0.98     OV        0.99     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.10     HN        1.08     KP        0.85     
!   LA        1.03     MK        1.00*    NL        0.98     OV        1.00     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.12     HN        1.08     KP        0.81     
!   LA        1.03     MK        1.00*    NL        0.99     OV        0.98     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.10     HN        1.08     KP        0.77     
!   LA        1.05     MK        1.00*    NL        0.95     OV        0.99     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.02     KP        0.73     
!   LA        1.06     MK        1.00*    NL        0.99     OV        1.00     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        1.05     KP        0.74     
!   LA        1.05     MK        1.00*    NL        0.97     OV        1.01     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.22     HN        1.17     KP        0.78     
!   LA        1.12     MK        1.00*    NL        1.05     OV        1.08     
!   PT        1.00     SC        1.11     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.16     HN        1.10     KP        0.73     
!   LA        1.01     MK        1.00*    NL        0.99     OV        1.05     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        1.13     KP        0.75     
!   LA        1.05     MK        1.00*    NL        0.99     OV        1.04     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.08     HN        1.09     KP        0.78     
!   LA        1.06     MK        1.00*    NL        1.00     OV        1.06     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.11     HN        1.08     KP        0.81     
!   LA        1.05     MK        1.00*    NL        0.99     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.10     KP        0.84     
!   LA        1.03     MK        1.00*    NL        0.99     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.075536Jy  sigma=0.000808
! Fit after  self-cal, rms=0.072393Jy  sigma=0.000776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=3.22 mas, bpa=75.86 degrees
! Estimated noise=303.343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.8, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159555 Jy
! Component: 100  -  total flux cleaned = 0.00160644 Jy
! Component: 150  -  total flux cleaned = 0.0014179 Jy
! Component: 200  -  total flux cleaned = 0.00128009 Jy
! Total flux subtracted in 200 components = 0.00128009 Jy
! Clean residual min=-0.001698 max=0.001733 Jy/beam
! Clean residual mean=-0.000001 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.165293 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 67 components and 0.165293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072194Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072215Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072215Jy  sigma=0.000773
! Fit after  self-cal, rms=0.072478Jy  sigma=0.000772
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.091 mas, bmaj=3.211 mas, bpa=75.85 degrees
! Estimated noise=302.627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.99947e-05 Jy
! Component: 100  -  total flux cleaned = -4.6166e-05 Jy
! Component: 150  -  total flux cleaned = -1.21707e-05 Jy
! Component: 200  -  total flux cleaned = -1.4699e-05 Jy
! Total flux subtracted in 200 components = -1.4699e-05 Jy
! Clean residual min=-0.001296 max=0.001021 Jy/beam
! Clean residual mean=-0.000002 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.165278 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.165278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072417Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072425Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243853 Jy
! Component: 100  -  total flux cleaned = 0.000452523 Jy
! Component: 150  -  total flux cleaned = 0.000564971 Jy
! Component: 200  -  total flux cleaned = 0.00059886 Jy
! Total flux subtracted in 200 components = 0.00059886 Jy
! Clean residual min=-0.001189 max=0.001050 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.165877 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 108 components and 0.165877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072411Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072409Jy  sigma=0.000771
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072409Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072617Jy  sigma=0.000771
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=3.208 mas, bpa=75.91 degrees
! Estimated noise=302.308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000562924 Jy
! Component: 100  -  total flux cleaned = -0.000539748 Jy
! Component: 150  -  total flux cleaned = -0.00050654 Jy
! Component: 200  -  total flux cleaned = -0.000423131 Jy
! Total flux subtracted in 200 components = -0.000423131 Jy
! Clean residual min=-0.000955 max=0.000950 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.165454 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 0.165454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072598Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072603Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146714 Jy
! Component: 100  -  total flux cleaned = 0.000237459 Jy
! Component: 150  -  total flux cleaned = 0.000269606 Jy
! Component: 200  -  total flux cleaned = 0.000307654 Jy
! Total flux subtracted in 200 components = 0.000307654 Jy
! Clean residual min=-0.000917 max=0.000974 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.165761 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 135 components and 0.165761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072598Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072598Jy  sigma=0.000771
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072598Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072760Jy  sigma=0.000771
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.203 mas, bmaj=3.626 mas, bpa=81.1 degrees
! Estimated noise=343.533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000330621 Jy
! Component: 100  -  total flux cleaned = -0.000345746 Jy
! Component: 150  -  total flux cleaned = -0.000358375 Jy
! Component: 200  -  total flux cleaned = -0.000350808 Jy
! Total flux subtracted in 200 components = -0.000350808 Jy
! Clean residual min=-0.000921 max=0.000877 Jy/beam
! Clean residual mean=0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.165411 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 143 components and 0.165411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072753Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072757Jy  sigma=0.000771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126083 Jy
! Component: 100  -  total flux cleaned = 0.000140706 Jy
! Component: 150  -  total flux cleaned = 0.000128513 Jy
! Component: 200  -  total flux cleaned = 0.000112025 Jy
! Total flux subtracted in 200 components = 0.000112025 Jy
! Clean residual min=-0.000910 max=0.000876 Jy/beam
! Clean residual mean=0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.165523 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 149 components and 0.165523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072756Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072756Jy  sigma=0.000771
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=3.207 mas, bpa=75.95 degrees
! Estimated noise=302.131 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 3.207 at 75.95 degrees (North through East)
! Clean map  min=-0.0008092  max=0.14153 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8984 mas, bmaj=2.944 mas, bpa=76.92 degrees
! Estimated noise=700.331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109472 Jy
! Component: 100  -  total flux cleaned = 0.133865 Jy
! Component: 150  -  total flux cleaned = 0.143612 Jy
! Component: 200  -  total flux cleaned = 0.149602 Jy
! Total flux subtracted in 200 components = 0.149602 Jy
! Clean residual min=-0.002821 max=0.003267 Jy/beam
! Clean residual mean=-0.000004 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.149602 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.149602 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=3.207 mas, bpa=75.95 degrees
! Estimated noise=302.131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580746 Jy
! Component: 100  -  total flux cleaned = 0.00930536 Jy
! Component: 150  -  total flux cleaned = 0.0115207 Jy
! Component: 200  -  total flux cleaned = 0.0130015 Jy
! Total flux subtracted in 200 components = 0.0130015 Jy
! Clean residual min=-0.001030 max=0.001027 Jy/beam
! Clean residual mean=-0.000002 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.162603 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 61 components and 0.162603 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.203 mas, bmaj=3.626 mas, bpa=81.1 degrees
! Estimated noise=343.533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139791 Jy
! Component: 100  -  total flux cleaned = 0.00222785 Jy
! Component: 150  -  total flux cleaned = 0.00263303 Jy
! Component: 200  -  total flux cleaned = 0.00275215 Jy
! Total flux subtracted in 200 components = 0.00275215 Jy
! Clean residual min=-0.001015 max=0.000870 Jy/beam
! Clean residual mean=0.000002 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.165355 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68463e-05 Jy
! Component: 100  -  total flux cleaned = 9.41741e-05 Jy
! Component: 150  -  total flux cleaned = 0.000137487 Jy
! Component: 200  -  total flux cleaned = 0.000165785 Jy
! Total flux subtracted in 200 components = 0.000165785 Jy
! Clean residual min=-0.001001 max=0.000869 Jy/beam
! Clean residual mean=0.000002 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.165521 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 114 components and 0.165521 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=3.207 mas, bpa=75.95 degrees
! Estimated noise=302.131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68813e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116357 Jy
! Component: 150  -  total flux cleaned = 0.00012863 Jy
! Component: 200  -  total flux cleaned = 0.000116243 Jy
! Total flux subtracted in 200 components = 0.000116243 Jy
! Clean residual min=-0.000849 max=0.000925 Jy/beam
! Clean residual mean=0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.165637 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 131 components and 0.165637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072760Jy  sigma=0.000771
! Fit after  self-cal, rms=0.072756Jy  sigma=0.000771
wmodel J1926+7706_X_2014_08_05_pus_map.mod
! Writing 131 model components to file: J1926+7706_X_2014_08_05_pus_map.mod
wobs J1926+7706_X_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1926+7706_X_2014_08_05_pus_uvs.fits
wwins J1926+7706_X_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J1926+7706_X_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162327 Jy
! Component: 100  -  total flux cleaned = 0.000176678 Jy
! Component: 150  -  total flux cleaned = 0.000163914 Jy
! Component: 200  -  total flux cleaned = 0.000151454 Jy
! Component: 250  -  total flux cleaned = 0.000151264 Jy
! Component: 300  -  total flux cleaned = 0.000173598 Jy
! Component: 350  -  total flux cleaned = 0.000206002 Jy
! Component: 400  -  total flux cleaned = 0.000267365 Jy
! Component: 450  -  total flux cleaned = 0.0002872 Jy
! Component: 500  -  total flux cleaned = 0.000335372 Jy
! Component: 550  -  total flux cleaned = 0.000363413 Jy
! Component: 600  -  total flux cleaned = 0.000399861 Jy
! Component: 650  -  total flux cleaned = 0.000408786 Jy
! Component: 700  -  total flux cleaned = 0.000426253 Jy
! Component: 750  -  total flux cleaned = 0.000434661 Jy
! Component: 800  -  total flux cleaned = 0.000434704 Jy
! Component: 850  -  total flux cleaned = 0.000394148 Jy
! Component: 900  -  total flux cleaned = 0.000370315 Jy
! Component: 950  -  total flux cleaned = 0.000346747 Jy
! Component: 1000  -  total flux cleaned = 0.000308265 Jy
! Component: 1050  -  total flux cleaned = 0.000277829 Jy
! Component: 1100  -  total flux cleaned = 0.000210705 Jy
! Component: 1150  -  total flux cleaned = 0.000174069 Jy
! Component: 1200  -  total flux cleaned = 0.000137779 Jy
! Component: 1250  -  total flux cleaned = 0.00010934 Jy
! Component: 1300  -  total flux cleaned = 0.000102281 Jy
! Component: 1350  -  total flux cleaned = 6.75545e-05 Jy
! Component: 1400  -  total flux cleaned = 4.6993e-05 Jy
! Component: 1450  -  total flux cleaned = 4.02759e-05 Jy
! Component: 1500  -  total flux cleaned = 1.36178e-05 Jy
! Component: 1550  -  total flux cleaned = 4.42938e-07 Jy
! Component: 1600  -  total flux cleaned = -1.24747e-05 Jy
! Component: 1650  -  total flux cleaned = -2.52579e-05 Jy
! Component: 1700  -  total flux cleaned = -1.8903e-05 Jy
! Component: 1750  -  total flux cleaned = -2.35252e-07 Jy
! Component: 1800  -  total flux cleaned = -6.4546e-06 Jy
! Component: 1850  -  total flux cleaned = -3.08689e-05 Jy
! Component: 1900  -  total flux cleaned = -3.68392e-05 Jy
! Component: 1950  -  total flux cleaned = -2.49581e-05 Jy
! Component: 2000  -  total flux cleaned = -7.22604e-06 Jy
! Total flux subtracted in 2048 components = -1.90187e-05 Jy
! Clean residual min=-0.000312 max=0.000342 Jy/beam
! Clean residual mean=0.000002 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.165618 Jy
keep
! Adding 155 model components to the UV plane model.
! The established model now contains 286 components and 0.165618 Jy
![Exited script file: muppet]
wmap "J1926+7706_X_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 3.207 at 75.95 degrees (North through East)
! Clean map  min=-0.00060098  max=0.14178 Jy/beam
! Writing clean map to FITS file: J1926+7706_X_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.141784 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000117291 
device "J1926+7706_X_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1926+7706_X_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.248177 0.248177 0.496354 0.992708 1.98542 3.97083 7.94166 15.8833 31.7667 63.5333
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.141 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 3.207 at 75.95 degrees (North through East)
! Clean map  min=-0.00060098  max=0.14178 Jy/beam
quit
! Quitting program
! Log file J1926+7706_X_2014_08_05_pus_uvs.log closed on Sat Nov 12 21:15:58 2016